Multivariate analysis of potentially toxic metals in sediments of a tropical coastal lagoon

Surface sediments collected from the Lagos Lagoon, Nigeria, and three adjoining rivers were analysed for their physicochemical properties and pseudo-total concentration of the potentially toxic metals (PTM) Cd, Cr, Cu, Pb and Zn. The concentration of the PTM varied seasonally and spatially. Odo-Iyaalaro was observed to be the most polluted river, with highest concentrations of 42.1 mg kg^?1, 102 mg kg^?1, 185 mg kg^?1, 154 mg kg^?1 and 1040 mg kg^?1 of Cd, Cr, Cu, Pb and Zn, respectively, while Ibeshe River was the least contaminated, apart from a site affected by Cu from the textile industry. Some of the sediments were found to be above the consensus-based probable effect concentrations and Dutch sediment guideline for metals. Overall metal concentrations were similar to those reported for other tropical lagoon and estuarine systems affected by anthropogenic inputs as a result of rapid urbanisation. Due to the large number of samples, principal component analysis was used to examine relationships within the data set. Generally, sediments collected during the dry season were observed to have higher concentration of PTM than those collected during the rainy season. This means that PTM could accumulate over a prolonged period and then be released relatively rapidly, on an annual basis, into tropical lagoon systems.     

The contribution of roadside soil to phosphorus loading in the eutrophic Lagos Lagoon, Nigeria

Roadside soils were sampled from the Lagos Lagoon catchment during the wet and dry seasons over the period 2005-2009. Lagoon sediment samples were also collected within the same period. All samples were digested with aqua regia to determine total phosphorus and extracted with 0.5 M sodium bicarbonate to determine the bioavailable fraction (Olsen-P). A segmented flow analyser method was used for analysis and good accuracy was demonstrated for two reference soils (SO-2 from CCMET and SRM 2711 from NIST). The Lagos Lagoon is a hypereutrophic water body (1270 ± 1170 μg P L(-1)), with significant areas of anoxia and water hyacinth growth. The total phosphorus concentrations in roadside soils (16 sites; mean ± 2 S.D.) were 285 ± 279 mg kg(-1) in the wet season and 424 ± 629 mg kg(-1) in the dry season, indicating that rainwater leaching is a major source of phosphorus in the lagoon. The bioavailable fractions were 5.17 ± 3.47 mg kg(-1) (2.1 ± 1.5% of the total) in the wet season and 13.0 ± 8.7 mg kg(-1) (4.3 ± 4.5% of the total) in the dry season.     

Assessment of noise level in sundry processing and manufacturing industries in Ilorin metropolis, Nigeria

In this work, noise level in five selected processing and manufacturing industries in Ilorin are evaluated and compared. Emphasis is given to noise emitted by individual industrial machinery from the selected industries. Event L _Aeq and L _N cycles were studied to identify the noisy machines and to generate baseline data. Findings show that hammer mill machine from mineral-bearing rock-crushing mills produced the highest average noise [98.4 dB(A)], an electric generator 1 [95.6 dB(A)] from the soft drink bottling industry, an electric generator [97.7 dB(A)] from the beer brewing and bottling industry, a vacuum pump [93.1 dB(A)] from the tobacco making industry, and an electric generator 2 [94.1 dB(A)] from the mattress-making industry. The highest and lowest average noise exposure levels are recorded in mineral-bearing rock-crushing mills [93.16 dB(A)] and the mattress making industry [84.69 dB(A)], respectively. The study shows that, at 95% confidence level, there is significant difference (P < 0.05) in noise levels in the industries surveyed. The percentages of machines that emit noise above Federal Environmental Protection Agency and Occupational Safety and Health Administration recommendations [90 dB(A)] are from the soft drink bottling industry (83.3%), the beer brewing and bottling industry (42.9%), the tobacco making industry (71.4%), the mattress making industry (11.1%), and minerals crushing mills (87.5%). In the past 20 years, the noise levels in the soft drink bottling industry were reduced by 0.58 dB(A), and those of the beer brewing and bottling industry were reduced by 9.66 dB(A). However, that of the mattress making industry increased by 2.69 dB(A). On average, the noise level in these industries has been reduced by 2.52 dB(A). The results of this study show that the noise control measures put in place have significant impacts on the noise exposure level in the industries surveyed.     

Evaluation and analysis of noise levels in Ilorin metropolis, Nigeria

Evaluation and analysis of noise pollution levels have been carried out to determine the level of noise and its sources in Ilorin metropolis. Noise measurements have been done in the morning, at noon, in the evening, and at night to determine noise pollution all over the city. The selected areas of study are commercial centers, road junctions/busy roads, passenger loading parks, and high-density and low-density residential areas. The road junctions had the highest noise pollution levels, followed by commercial centers. The results of this study show that the noise levels in Ilorin metropolis exceeded allowed values at 30 of 42 measurements points. There is a significant difference (P?<?0.05) in the noise pollution levels and traffic noise index in all the locations. From the measured noise values, a map of noise pollution was developed for Ilorin. Many solutions proposed for noise abatement in the city are set out.     

Multifunctional metal-organic frameworks in oil spills and associated organic pollutant remediation

The release of toxic organic compounds into the environment in an event of oil spillage is a global menace due to the potential impacts on the ecosystem. Several approaches have been employed for oil spills clean-up, with adsorption technique proven to be more promising for the total reclamation of a polluted site. Of the several adsorbents so far reported, adsorbent-based porous materials have gained attention for the reduction/total removal of different compounds in environmental remediation applications. The superior potential of mesoporous materials based on metal–organic frameworks (MOFs) against conventional adsorbents is due to their intriguing and enhanced properties. Therefore, this review presents recent development in MOF composites; methods of preparation; and their practical applications towards remediating oil spill, organic pollutants, and toxic gases in different environmental media, as well as potential materials in the possible deployment in reclaiming the polluted Niger Delta due to unabated oil spillage and gas flaring.

     

Fractionation and ecotoxicological implication of potentially toxic metals in sediments of three urban rivers and the Lagos Lagoon,Nigeria, West Africa

The potential environmental impact of sediment-bound Cd, Cr, Cu, Pb and Zn in three trans-urban rivers in Lagos state and in the Lagos Lagoon was assessed by use of the modified Community Bureau of Reference (BCR) sequential extraction. The quality of the data was checked using BCR CRM 143R and BCR CRM 701. Good agreement was obtained between found and certified/indicative values. Of the rivers, the Odo-Iyaalaro, was generally the most contaminated and the Ibeshe the least. Higher concentrations of metals were generally found in the dry season compared to the wet season. Cadmium and Zn were released mostly in the acid exchangeable step of the sequential extraction, indicating that they have the greatest potential mobility and bioavailability of the analytes studied. Chromium and Cu were associated mainly with the reducible and oxidisable fractions, and Pb predominantly with the reducible and residual fractions. Sediments with the highest pseudototal analyte concentrations also released higher proportions of analytes earlier in the sequential extraction procedure. The study suggests that, during the dry season, potentially toxic metals (PTM) may accumulate in sediments in relatively labile forms that are released and can potentially be transported or bioaccumulate in the rainy season. Application of risk assessment codes and Hankanson potential risk indices indicated that Cd was the element of greatest concern in the Lagos Lagoon system. The study indicated that there is a need to strengthen environmental management and pollution control measures to reduce risk from PTM, but that even relatively simple strategies, such as seasonal restrictions on dredging and fishing, could be beneficial.     

Comparison of three sequential extraction protocols for the fractionation of potentially toxic metals in coastal sediments

In the determination of the best sequential extraction procedures (SEP) for the speciation of metals in sediment samples from the Lagos lagoon system, three sequential extraction procedures were compared for the fractionation of Cd, Cr, Cu, Pb, and Zn. The SEP compared included a modified Tessier??s procedure carried out in five steps, while the two other procedures were the three-step original Community Bureau of Reference (BCR) and the modified BCR techniques (four steps). Quantification of the metal concentration was achieved with a flame atomic absorption spectrophotometer. The results obtained by the three methods were compared, and the modified BCR and Tessier SEP were found to extract more Cu, Cr, Pb, and Zn in the reducible phase and therefore a decrease in the oxidizable phase than the original BCR SEP. The most mobile elements were found to be Cd, Pb, and Zn. These are of environmental concern, as these potentially toxic metals could be easily released into the aquatic environment with consequent ingestion by aquatic organisms, thereby entering the food chain. The mass balance (percent recovery) was found to be between 85% and 115% in most cases. Prior to the comparison, the analytical performance of the laboratory was tested using a secondary reference material, GLAURM, using the three-step modified BCR procedure. The results showed high reliability of the analytical performance of the laboratory for all the metals considered.     

A comparative study of noise pollution levels in some selected areas in Ilorin Metropolis, Nigeria

The noise pollution is a major problem for the quality of life in urban areas. This study was conducted to compare the noise pollution levels at busy roads/road junctions, passengers loading parks, commercial, industrial and residential areas in Ilorin metropolis. A total number of 47-locations were selected within the metropolis. Statistical analysis shows significant difference (P < 0.05) in noise pollution levels between industrial areas and low density residential areas, industrial areas and high density areas, industrial areas and passengers loading parks, industrial areas and commercial areas, busy roads/road junctions and low density areas, passengers loading parks and commercial areas and commercial areas and low density areas. There is no significant difference (P > 0.05) in noise pollution levels between industrial areas and busy roads/road junctions, busy roads/road junctions and high density areas, busy roads/road junctions and passengers loading parks, busy roads/road junctions and commercial areas, passengers loading parks and high density areas, passengers loading parks and commercial areas and commercial areas and high density areas. The results show that Industrial areas have the highest noise pollution levels (110.2 dB(A)) followed by busy roads/Road junctions (91.5 dB(A)), Passengers loading parks (87.8 dB(A)) and Commercial areas (84.4 dB(A)). The noise pollution levels in Ilorin metropolis exceeded the recommended level by WHO at 34 of 47 measuring points. It can be concluded that the city is environmentally noise polluted and road traffic and industrial machineries are the major sources of it. Noting the noise emission standards, technical control measures, planning and promoting the citizens awareness about the high noise risk may help to relieve the noise problem in the metropolis.