A global perspective on the biology,impact and management of Chenopodium album and Chenopodium murale: two troublesome agricultural and environmental weeds

Environmental Science and Pollution Research - Chenopodium album and C. murale are cosmopolitan, annual weed species of notable economic importance. Their unique biological features, including high...     

Evaluation of compost blankets for erosion control from disturbed lands

Soil erosion due to water and wind results in the loss of valuable top soil and causes land degradation and environmental quality problems. Site specific best management practices (BMP) are needed to curb erosion and sediment control and in turn, increase productivity of lands and sustain environmental quality. The aim of this study was to investigate the effectiveness of three different types of biodegradable erosion control blankets- fine compost, mulch, and 50-50 mixture of compost and mulch, for soil erosion control under field and laboratory-scale experiments. Quantitative analysis was conducted by comparing the sediment load in the runoff collected from sloped and tilled plots in the field and in the laboratory with the erosion control blankets. The field plots had an average slope of 3.5% and experiments were conducted under natural rainfall conditions, while the laboratory experiments were conducted at 4, 8 and 16% slopes under simulated rainfall conditions. Results obtained from the field experiments indicated that the 50-50 mixture of compost and mulch provides the best erosion control measures as compared to using either the compost or the mulch blanket alone. Laboratory results under simulated rains indicated that both mulch cover and the 50-50 mixture of mulch and compost cover provided better erosion control measures compared to using the compost alone. Although these results indicate that the 50-50 mixtures and the mulch in laboratory experiments are the best measures among the three erosion control blankets, all three types of blankets provide very effective erosion control measures from bare-soil surface. Results of this study can be used in controlling erosion and sediment from disturbed lands with compost mulch application. Testing different mixture ratios and types of mulch and composts, and their efficiencies in retaining various soil nutrients may provide more quantitative data for developing erosion control plans.     

An integrated assessment model for cross-country pipelines

The cross-country petroleum pipelines are environmentally sensitive because they traverse through varied terrain covering crop fields, forests, rivers, populated areas, desert, hills and offshore. Any malfunction of these pipelines may cause devastating effect on the environment. Hence, the pipeline operators plan and design pipelines projects with sufficient consideration of environment and social aspects along with the technological alternatives. Traditionally, in project appraisal, optimum technical alternative is selected using financial analysis. Impact assessments (IA) are then carried out to justify the selection and subsequent statutory approval. However, the IAs often suggest alternative sites and/or alternate technology and implementation methodology, resulting in revision of entire technical and financial analysis. This study addresses the above issues by developing an integrated framework for project feasibility analysis with the application of analytic hierarchy process (AHP), a multiple attribute decision-making technique. The model considers technical analysis (TA), socioeconomic IA (SEIA) and environmental IA (EIA) in an integrated framework to select the best project from a few alternative feasible projects. Subsequent financial analysis then justifies the selection. The entire methodology has been explained here through a case application on cross-country petroleum pipeline project in India.     

Analytic hierarchy process helps select site for limestone quarry expansion in Barbados

Site selection is a key activity for quarry expansion to support cement production, and is governed by factors such as resource availability, logistics, costs, and socio-economic-environmental factors. Adequate consideration of all the factors facilitates both industrial productivity and sustainable economic growth. This study illustrates the site selection process that was undertaken for the expansion of limestone quarry operations to support cement production in Barbados. First, alternate sites with adequate resources to support a 25-year development horizon were identified. Second, technical and socio-economic-environmental factors were then identified. Third, a database was developed for each site with respect to each factor. Fourth, a hierarchical model in analytic hierarchy process (AHP) framework was then developed. Fifth, the relative ranking of the alternate sites was then derived through pair wise comparison in all the levels and through subsequent synthesizing of the results across the hierarchy through computer software (Expert Choice). The study reveals that an integrated framework using the AHP can help select a site for the quarry expansion project in Barbados.     

Application of sequential leaching, risk indices and multivariate statistics to evaluate heavy metal contamination of estuarine sediments: Dhamara Estuary, East Coast of India

In the present study, concentration of some selected trace metals (Fe, Mn, Ni, Co, Pb, Zn, Cu, Cr and Cd) are measured in Brahmani, Baitarani river complex along with Dhamara estuary and its near shore. Chemical partitioning has been made to establish association of metals into different geochemical phases. The exchangeable fraction is having high environmental risk among non-lithogeneous phases due to greater potential for mobility into pore water. The metals with highest bio-availability being Cd, Zn and Cr. The metals like Mn, Zn, Cd and Cu represent an appreciable portion in carbonate phase. Fe–Mn oxides act as efficient scavenger for most of the metals playing a prime role in controlling their fate and transport. Among non-lithogeneous phases apart from reducible, Cr showed a significant enrichment in organic phase. Risk assessment code values indicate that all metals except Fe fall under medium-risk zone. In estuarine zone Cd, Zn, Pb and Cr are released to 32.43, 26.10, 21.81 and 20 %, respectively, indicating their significant bio-availability pose high ecological risk. A quantitative approach has been made through the use of different risk indices like enrichment factor, geo-accumulation index and pollution load index. Factor analysis indicates that in riverine zone, Fe–Mn oxides/hydroxides seem to play an important role in scavenging metals, in estuarine zone, organic precipitation and adsorption to the fine silt and clay particles while in coastal zone, co-precipitation with Fe could be the mechanism for the same. Canonical discriminant function indicates that it is highly successful in discriminating the groups as predicted.     

Nutrient transport through a Vegetative Filter Strip with subsurface drainage

The transport of nutrients and soil sediments in runoff has been recognized as a noteworthy environmental issue. Vegetative Filter Strips (VFS) have been used as one of the best management practices (BMPs) for retaining nutrients and sediments from surface runoff, thus preventing the pollutants from reaching receiving waters. However, the effectiveness of a VFS when combined with a subsurface drainage system has not been investigated previously. This study was undertaken to monitor the retention and transport of nutrients within a VFS that had a subsurface drainage system installed at a depth of 1.2 m below the soil surface. Nutrient concentrations of NO₃-N (Nitrate Nitrogen), PO₄⁻ (Orthophosphorus), and TP (Total Phosphorus) were measured in surface water samples (entering and leaving the VFS), and subsurface outflow. Soil samples were collected and analyzed for plant available Phosphorus (Bray P1) and NO₃-N concentrations. Results showed that PO₄⁻, NO₃-N, and TP concentrations decreased in surface flow through the VFS. Many surface outflow water samples from the VFS showed concentration reductions of as much as 75% for PO₄⁻ and 70% for TP. For subsurface outflow water samples through the drainage system, concentrations of PO₄⁻ and TP decreased but NO₃-N concentrations increased in comparison to concentrations in surface inflow samples. Soil samples that were collected from various depths in the VFS showed a minimal buildup of nutrients in the top soil profile but indicated a gradual buildup of nutrients at the depth of the subsurface drain. Results demonstrate that although a VFS can be very effective in reducing runoff and nutrients from surface flow, the presence of a subsurface drain underneath the VFS may not be environmentally beneficial. Such a combination may increase NO₃-N transport from the VFS, thus invalidating the purpose of the BMP.     

Study of Geochemical Association of Some Trace Metals in the Sediments of Chilika Lake: A Multivariate Statistical Approach

In order to establish the natural processes and geochemical factors responsible for enrichment of trace metal ions (Cu, Co, Ni, Zn and Cr) with respect to textural parameters (sand, silt and clay weight percentages) along with depth, multivariate statistical approach has been carried out for sediments in different water zones of Chilika lake, the largest brackish water lagoon in Asia. The rotated varimax factor results reveal that Cobalt enrichment is controlled by both textural parameters as well as adsorption mechanism. In fresh and saline water region, textural parameters and in mixed water, adsorption phenomenon predominates. Zn in fresh water is related to clay, whereas it is in adsorbed state in mixed water. Cu in fresh water sediments is in absorbed state and in mixed water it is related to depth and Co concentration. Cr does not show any specific association in fresh water, but in both mixed and saline water it is associated with clay minerals. Although both textural parameters and adsorption mechanism play an important role for the enrichment of trace metal ions in these lagoonal sediments, their relative importance varies with specific metal ions as well as the water quality. Sequential extraction technique was used to characterize the various forms of metals in the < 63μ size sediments of Chilika lake. The concentrations determined indicated selective accumulation of the various metals in the different phases with spatial variability in different water zones. Slightly higher availability of Co and Zn near Balugaon township in exchangeable phase may be related to anthropogenic activities. Among the non-lithogenous (NL) phases, reducible phase associated with higher concentration of Ni, Cu and Cr. Organic bound Zn and Co contributed highest percentages among NL fractions. Residual fraction contributed more than 50% in most of the cases, reflected the predominance of physical weathering, high erosion rate along the drainage basin.     

Nanoweapon: control of mosquito breeding using carbon-dot-silver nanohybrid as a biolarvicide

Health issues induced by mosquito illnesses highlight the need for effective control. Here, we developed an efficient carbon-dot-silver nanohybrid to control Anopheles stephensi and Culex quinquefasciatus mosquito species. The nanohybrid was synthesized using a thermal method without addition of any toxic-reducing agent. Monohybrids are found within the ranges of 2–6 nm for carbon-dot and 10–35 nm for silver nanoparticles with uniform distribution. The uniformly dispersed nanohybrid solutions show excellent larvicidal activity within the concentration range of 0.5–1.0 ppm. Morphological studies evidence the presence of strong bonds between nanohybrid and sulphur- or phosphorus-containing compounds such as proteins and DNA present in the larval body. This explains tissue damage at very low concentrations of nanohybrid. Therefore, this nanoweapon has high potential for field applications.     

Overland and near-surface transport of Cryptosporidium parvum from vegetated and nonvegetated surfaces

Understanding microbial pathogen transport patterns in overland flow is important for developing best management practices for limiting microbial transport to water resources. Knowledge about the effectiveness of vegetative filter strips (VFS) to reduce pathogen transport from livestock confinement areas is limited. In this study, overland and near-surface transport of Cryptosporidium parvum has been investigated. Effects of land slopes, vegetation, and rainfall intensities on oocyst transport were examined using a tilting soil chamber with two compartments, one with bare ground and the other with brome (Bromus inermis Leyss.) vegetation. Three slope conditions (1.5, 3.0, and 4.5%) were used in conjunction with two rainfall intensities (25.4 and 63.5 mm/h) for 44 min using a rainfall simulator. The vegetative surface was very effective in reducing C. parvum in surface runoff. For the 25.4 mm/h rainfall, the total percent recovery of oocysts in overland flow from the VFS varied from 0.6 to 1.7%, while those from the bare ground condition varied from 4.4 to 14.5%. For the 63.5 mm/h rainfall, the recovery percentages of oocysts varied from 0.8 to 27.2% from the VFS, and 5.3 to 59% from bare-ground conditions. For all slopes and rainfall intensities, the total (combining both surface and near-surface) recovery of C. parvum oocysts was considerably less from the vegetated surface than those from the bare-ground conditions. These results indicate that the VFS can be a best management practice for controlling C. parvum in runoff from animal production facilities.     

A simple chemical method for the synthesis of Cu2+ engrafted MgAl2O4 nanoparticles: Efficient fluoride adsorbents, photocatalyst and latent fingerprint detection

An adaptable, energy efficient chemical process is employed to synthesize Cu~(2+)engrafted MgAl_2O_4 nanoparticles(Mg_(1-x)Cu_xAl_2O_4, x = 0, 0.1, 0.3, 0.5 abbreviated as MCA0, MCA1, MCA3,and MCA5 respectively), using chelating ligand and the calcination temperature was determined by the thermogravimetric analysis of the precursor mass.They acted as good fluoride adsorbent in the presence of co-ions, different pH(2–11) via chemisorption revealed from Fourier-transform infrared spectroscopy(FTIR) and photodegraded Methylene Blue(MB).The satisfactory results were for MCA1(specific surface area 25.05 m~2/g) with 97%fluoride removal at pH 7.0 for the 10 mg/L initial fluoride concentration for 1.5 g/L adsorbent dose with 45 min contact time obeying the Langmuir isotherm model with negative thermodynamic parameters and 4 mmol of MCA3 with 98.51% photodegradation for 10~(-5) mol/L MB solution obeying pseudo-second-order and pseudo-first-order kinetics respectively.The proposed photodegradation mechanism of MB was established by the FTIR and high-performance liquid chromatography(HPLC) analysis.The nanoparticles are cubic, estimated through X-ray diffraction(XRD) and transmission electron microscopy(TEM) analysis.The band gap energies, grain size, and the effective working pH were estimated by diffuse reflectance spectra(DRS), scanning electron microscope(SEM), and zero-point potential analysis respectively.A soil candle with MCA1 also fabricated for the household purpose and tested with some fluorinated field samples.The MCA3 was able to enhance the latent fingerprint on smooth surfaces.