Effect of dietary protein on the distribution of cadmium,zinc and copper in rats following the oral administration of cadmium

Cadmium, 100 μg/rat/day, was administered orally 100 times (total amount of Cd administered, 10 mg), under conditions of low protein intake. The total amount of Cd in the liver and kidneys was as follows: females fed 20% protein diets > females fed 5% protein diets > males fed 20% protein diets ≒ males fed 5% protein diets. A decreased Zn concentration was found in the liver of males and the pancreas of males and females fed with the 5% protein diet. The Cu concentration in the kidneys was markedly influenced by low protein intake.     

Biodegradation of Polycaprolactone Powders Proposed as Reference Test Materials for International Standard of Biodegradation Evaluation Method

Polycaprolactone (PCL) powders were prepared from PCL pellets using a rotation mechanical mixer. PCL powders were separated by sieves with 60 and 120 meshes into four classes; 0–125 μm, 125–250 μm, 0–250 μm and 250–500 μm. Biodegradation tests of PCL powders and cellulose powders in an aqueous solution at 25°C were performed using the coulometer according to ISO 14851. Biodegradation tests of PCL powders and cellulose powders in controlled compost at 58°C were performed by the Mitsui Chemical Analysis and Consulting Service, Inc. according to ISO 14855-1 and by using the Microbial Oxidative Degradation Analyzer (MODA) instrument according to ISO/DIS 14855-2. PCL powders were faster biodegraded than cellulose powders. The reproducibility of biodegradation of PCL powders is excellent. Differences in the biodegradation of PCL powders with different class were not observed by the ISO 14851 and ISO/DIS 14855-2. An enzymatic degradation test of PCL powders with different class was studied using an enzyme of Amano Lipase PS. PCL with smaller particle size was faster degraded by the enzyme. PCL powders with regulated sizes from 125 μm to 250 μm are proposed as a reference material for the biodegradation test.     

Studies on transitory laxative effects of sorbitol and maltitol I: Estimation of 50% effective dose and maximum non-effective dose

The dose-response relationship between low-caloric sweetening agents, sorbitol and maltitol, administered orally in single doses, and the induction of diarrheal symptoms was investigated. Seven healthy male and 7 healthy female Japanese each in their twenties, thirties, and forties, respectively, or a total of 42 subjects were admitted to the study. The 50% laxative effective dose of sorbitol was estimated to be 0.4 g/kg for males and 1.0 g/kg for females and that of maltitol was estimated to be 0.8 g/kg for both males and females. The maximum non-effective dose of sorbitol was estimated to be 0.15 g/kg for males and 0.3 g/kg for females and that of maltitol was estimated to be 0.3 g/kg for both males and females.     

Biomass Carbon Ratio of Polymer Composites Measured by Accelerator Mass Spectrometry

The evaluation method of biomass carbon ratio of polymer composite samples including organic and inorganic carbons individually was investigated. Biodegradable plastics and biobased plastics can have their mechanical properties improved by combining with inorganic fillers. Polymer composites consisting of biodegradable plastics and carbonate were prepared by two different methods. Poly(lactic acid) (PLA) composite was prepared by synthesis from l-lactide with catalyst and calcium carbonate (CaCO₃) powders from lime. Poly(butylene succinate) (PBS) composite was prepared by hot-pressing the mixture of PBS powder and CaCO₃ powders from oyster shells. The mechanical properties of composite samples were investigated by a tensile test and a compression test using an Instron type mechanical tester. Tensile test with a dumbbell shape specimen was performed for PBS composite samples and compression test with a column shape specimen for PLA composite samples. Strength, elastic modulus and fracture strain were obtained from the above tests. Biomass carbon ratio is regulated in the American Standards for Testing and Materials (ASTM). In ASTM standards on biomass carbon ratio, it is required that carbon atoms from carbonates, such as CaCO₃, are omitted. Biomass carbon ratio was evaluated by ratio of ¹⁴C to ¹²C in the samples using Accelerator Mass Spectrometry (AMS). The effect of pretreatment, such as oxidation temperature and reaction by acid, on results of biomass carbon ratio was investigated. Mechanical properties decrease with increasing CaCO₃ content. The possibility of an evaluation method of biomass carbon ratio of materials including organic and inorganic carbons was shown.     

Biobased Contents of Organic Fillers and Polycaprolactone Composites with Cellulose Fillers Measured by Accelerator Mass Spectrometry Based on ASTM D6866

The biobased contents of raw materials such as starches, sugar, chitin, or wood powders for biomass plastics were measured using Accelerator Mass Spectrometry (AMS) based on ASTM D6866. AMS measures the isotope carbon ratio of ¹⁴C to ¹²C and ¹³C in graphite derived from sample powders. The biobased contents of starches, sugar or chitin were almost 100% which means that they are fully biobased. The biobased contents of the wood powders were over 140% due to the effect of the post 1950s ¹⁴C injection due to nuclear testing. Poly(ε-caprolactone) (PCL) composite samples were prepared using the polymerization and direct molding method. The starting compound was the ε-caprolactone monomer liquid combined with cellulose and inorganic fillers using aluminum triflate as a catalyst at 80 °C for 6 or 24 h. PCL cylinder-shaped composite samples with a homogeneously dispersed cellulose filler were prepared with M_n = 4,600 (M_w/M_n = 2.9). The biobased content of the PCL composite with 50 wt% cellulose filler (51.67%) measured using AMS was slightly higher than the carbon ratio of cellulose in the starting powder samples (41.3 mol%). This is due to the higher biobased content (112.70%) of the cellulose filler used in this study. The biobased content of the polymer composite powders by AMS was found not to be affected by the presence of inorganic fillers, such as talc.     

Use of Diisobutylene Fuel in a Single Cylinder Engine: Effects of Equivalence Ratio on Exhaust Composition

This study describes the variations in the chemical composition of the exhaust at various equivalence ratios (air-fuel ratios) when pure diisobutylene (2,4,4-trimethyl-l-pentene) is used as a fuel in a Labeco single cylinder engine. The exhaust hydrocarbon products from diisobutylene consist of two types: those which decrease as the equivalence ratio is increased: methane, ethylene, acetylene, diisobutylene; and those which exhibit a maximum near an equivalence ratio of 1, then decrease: propylene, propadiene, isobutyl-ene, ethane, 2-methyl-l-butene. The combustion of diisobutylene produces two olefins in low yield which are not observed in the combustion of isooctane fuel. These are 2,4-dimethyl-l,3-pentadiene, probably derived from pyrolytic decomposition of C₇-alkyl radicals, and 3,5,5-trimethyl-2-hexene, probably arising from methyl radical addition to the alpha carbon of the parent fuel molecule. Comparison of the photochemical reactivity of dissobutylene exhaust to that of isooctane at a fuel-lean condition, indicates that diisobutylene, surprisingly, exhibits lower total photochemical reactivity.     

Effect of Methanol on Exhaust Composition of a Fuel Containing Toluene,n-Heptane,and Isooctane

This study describes the variations in the chemical composition of the exhaust from a single cylinder engine when up to 25% methanol is added to a fuel blend of toluene, isooctane, and n-heptane. Under fuel-rich conditions, and with increasing methanol concentration, it is observed that unburned fuel and benzene emissions increase, exhaust acetylene remains constant, and propylene, isobutylene, methane, ethylbenzene, and styrene concentrations decrease. As oxygen becomes more available, the effects of methanol are reduced, and at an equivalence ratio of 1.25—excess oxygen now is present—methanol no longer affects the concentration of exhaust hydrocarbons. These observations are explained by the reactions of formaldehyde—an incomplete combustion product of methanol— with alkyl radicals derived from the fuel. The photochemical reactivity of the exhaust is unchanged when up to 15% of methanol is present in the fuel at an equivalence ratio of 0.85, but increases at higher methanol contents because of the increase in unburned toluene in the exhaust.     

Studies on transitory laxative effects of sorbitol and maltitol: II: Differences in laxative effects among various foods containing the sweetening agents

We studied the laxative effect of sweetening agents, hydrogenated glucose syrup (HGS) containing 88–92% maltitol, and sorbitol contained in various foods. The subjects were 89 volunteers (64 males and 25 females). Foods used in the study were tablets, bevarages, chewing gum, jelly, adzuki-bean jelly, chocolate and candies which contained one of the two sweetening agents.The doses of the sweetening agents were 0.4 g/kg for sweets in tablet form and 20 g for the other foods. Approximately 10% of the subjects exhibited diarrhea after taking tablets as a control; approximately 20% did so after taking HGS except for adzuki-bean jelly; and approximately 30% did so after taking sorbitol. There was no significant difference between HGS and the control substance. The incidence of diarrhea tended to be higher with the two sweetening agents only when contained in adzuki-bean jelly. The length of time between the ingestion of test substances and the first onset of diarrheal stool varied widely from less than one hour to 23 hours among individuals. However, adzuki-bean jelly diarrhea was induced within 5 hours in all subjects. Soft stool accounted for 60 – 90% of the macroscopic findings of diarrheal stool. Chief complaints of abdominal symptoms were gurgling, flatus and lower abdominal pain.