颗粒物质金属形态逐级提取技术问题的探讨

本文综述了国内外对颗粒物质中金属形态逐级提取测定技术方面的研究情况，重点阐述了颗粒物质金属形态分离方法，并对各相态的浸取技术和金属总量提取方法进行了讨论．从而为开展颗粒物质的金属化学形态的分析和研究，提出几点认识．     

酸性矿井水中和沉淀法除铁优化

针对山西某煤矿高矿化度、高铁酸性矿井水除铁效果差、出水容易返色等问题,采用NaOH中和调pH、曝气及化学氧化等处理工艺进行酸性矿井水中和沉淀法除铁优化实验研究。结果表明,采用NaOH中和沉淀法除铁时,投加中和剂使出水pH达6.7以上时,出水中铁含量低于10 mg/L,满足排放要求。对于本实验废水NaOH所需投加量为2.8 g/L,铁的去除率可达到99.75%;以H2O2对原水进行氧化处理,可迅速将Fe(Ⅱ)氧化成Fe(Ⅲ),其用量与原水中Fe(Ⅱ)的含量成正比。当其用量为1.6 mL/L时,可将原水中的Fe(Ⅱ)完全转化为Fe(Ⅲ),投加中和剂使出水pH达到4.5以上时,能使出水中铁含量满足排放要求。对于实验废水所需的NaOH投加量为2.0 g/L,比直接中和沉淀所需的NaOH用量要节省28.6%。曝气处理对原水中Fe(Ⅱ)的氧化效果不明显。     

基于安全度与运营格局的油库选址优先级评价方法研究

从安全性和运营角度对油库选址的影响因素及评价指标分析对油库的安全稳定及有效运营具有重要的意义。该文选取与安全和运营有关的人口企业数量、安全管理能力、消防设施规划、地形地质条件、铁路公路数量、市场投资收益、政策支持情况等影响因子进行重要性及合理程度分析,综合运用安全度与运营格局影响因素多元耦合关系,构建了油库区安全与运营评价体系,改进了原有的模糊层次法评价模型,并对某油库区安全度与运营格局进行了评估验证。结果表明:利用改进模糊层次法能够较好地评价不同地址的优先级,评价模型具有一定应用性,能够对不同地址的特点及评价权重进行有效分析,可见油库选址优先级评价方法是实用且有效的。该研究方法及结果可以为油库区地址的优选提供一定参考与建议。     

过氧化钙缓释材料对河道水固磷及底泥控磷的机理研究

用聚乙二醇2000(PEG2000)和硬脂酸(SA)包埋粉末过氧化钙(CP)成功制备了CP缓释材料CP@PEG2000-SA。比较了粉末CP和CP@PEG2000-SA对上覆水中溶解性总磷的影响和对底泥中磷酸铝盐(Al-P)、磷酸铁盐(Fe-P)和磷酸钙盐(Ca-P)的影响。结果表明,CP@PEG2000-SA投加量宜为1.8kg/m2,在CP用量相同的条件下计算得到粉末CP投加量为1.0kg/m~2。投加粉末CP在10d内上覆水中溶解性总磷浓度迅速降至最低后又上升,而投加CP@PEG2000-SA可以实现35d内溶解性总磷持续缓慢下降。上覆水中的内源性磷一般来自底泥中Fe-P的释放。投加粉末CP虽能固定Fe-P含量,但起不到长效作用,甚至可能导致Al-P的释放。投加CP@PEG2000-SA可控制氧气释放速率,稳定pH,使得上覆水中溶解性总磷向底泥中的Al-P、Ca-P和Fe-P转化,起到长效抑制底泥中内源性磷向水体释放并同时吸收水体中磷的双重效应,达到了控磷目的。     

邻苯二甲酸二丁酯暴露对雄性大鼠生精细胞功能影响

观察不同剂量的邻苯二甲酸二丁酯(DBP)对成年大鼠生精细胞损伤、端粒酶和端粒酶逆转录酶(TERT)表达影响.对40只健康雄性SD大鼠随机分成4组,分别为500mg·kg-1·d-1、250mg·kg-1·d-1、50mg·kg-1·d-1 3个染毒组和1个对照组,灌胃量为5mL·kg-1体重,灌胃法连续给药6周.对体重...     

Arbuscular mycorrhizal fungi alter the response of growth and nutrient uptake of snap bean（Phaseolus vulgaris L.） to O_3

The effects of arbuscular mycorrhizal fungi (AMF) Glomus mosseae on the responses to elevated O3 in growth and nutrition of snap bean (Phaseolus vulgaris L. cv Guangzhouyuan) were investigated. Exposure was conducted in growth chambers by using three O3 concentrations (20 (CF), 80 (CFO1) and 120 nL/L (CFO2); 8 hr/day for 75 days). Results showed that elevated O3 slightly impacted overall mycorrhizal colonization, but significantly decreased the proportional frequency of hypha and increased the proportional frequency of spores and vesicles, suggesting that O3 had significant effects on mycorrhizal structure. Elevated O3 significantly decreased yield, dry mass and nutrient contents (N, P, K, Ca and Mg) in both non-mycorrhizal and mycorrhizal plants. However, significant interactive effects were found in most variables due to that the reduction by O3 in the mycorrhizal plants was less than that in the non-mycorrhizal plants. Additionally, AMF increased the concentrations of N, P, Ca, and Mg in shoot and root. It can be concluded that AMF alleviated detrimental effects of increasing O3 on host plant through improving plant nutrition and growth.     

Biostability in distribution systems in one city in southern China：Characteristics, modeling and control strategy

This study investigated the bacterial regrowth in drinking water distribution systems receiving finished water from an advanced drinking water treatment plant in one city in southem China. Thirteen nodes in two water supply zones with different aged pipelines were selected to monitor water temperature, dissolved oxygen （DO）, chloramine residual, assimilable organic carbon （AOC）, and heterotrophic plate counts （HPC）. Regression and principal component analyses indicated that HPC had a strong correlation with chloramine residual. Based on Chick-Watson＇s Law and the Monod equation, biostability curves under different conditions were developed to achieve the goal of HPC 100 CFU/mL. The biostability curves could interpret the scenario under various AOC concentrations and predict the required chloramine residual concentration under the condition of high AOC level. The simulation was also carded out to predict the scenario with a stricter HPC goal （≤50 CFU/mL） and determine the required chloramine residual. The biological regrowth control strategy was assessed using biostability curve analysis. The results indicated that maintaining high chloramine residual concentration was the most practical way to achieve the goal of HPC ≤ 100 CFU/mL. Biostability curves could be a very useful tool for biostability control in distribution systems. This work could provide some new insights towards biostability control in real distribution systems.     

Efficient dechlorination of chlorinated solvent pollutants under UV irradiation by using the synthesized TiO2 nano-sheets in aqueous phase

Titanium dioxide(TiO2), which is the widely used photo-catalyst, has been synthesized by simple hydrothermal solution containing tetrabutyl titanate and hydrofluoric acid. The synthesized product has been applied to photo-degradation in aqueous phase of chlorinated solvents, namely tetrachloroethene(PCE), trichloroethene(TCE) and 1,1,1-trichloroethane(TCA). The photo-degradation results revealed that the degradation of these harmful chemicals was better in UV/synthesized TiO2 system compared to UV/commercial P25 system and UV only system. The photo-catalytic efficiency of the synthesized TiO2 was 1.4, 1.8 and 3.0 folds higher compared to the commercial P25 for TCA, TCE and PCE degradation, respectively. Moreover, using nitrobenzene(NB) as a probe of hydroxyl radical(.OH), the degradation rate was better over UV/synthesized TiO2, suggesting the high concentration of.OH generated in UV/synthesized TiO2system. In addition,.OH concentration was confirmed by the strong peak displayed in EPR analysis over UV/synthesized TiO2system. The characterization result using XRD and TEM showed that the synthesized TiO2 was in anatase form and consisted of well-defined sheet-shaped structures having a rectangular outline with a thickness of 4 nm, side length of 50 nm and width of 33 nm and a surface 90.3 m2/g. XPS analysis revealed that ≡Ti-F bond was formed on the surface of the synthesized TiO2. The above results on both photocatalytic activity and the surface analysis demonstrated the good applicability of the synthesized TiO2 nano-sheets for the remediation of chlorinated solvent contaminated groundwater.     

Simazine biodegradation and community structures of ammonia-oxidizing microorganisms in bioaugmented soil: impact of ammonia and nitrate nitrogen sources

The objective of the present study was to investigate the impact of ammonia and nitrate nitrogen sources on simazine biodegradation by Arthrobacter sp. strain SD1 and the community structures of ammonia-oxidizing archaea (AOA) and bacteria (AOB) in non-agricultural soil. Soil microcosms with different treatments were constructed for herbicide biodegradation test. The relative abundance of the strain SD1 and the structures of AOA and AOB communities were assessed using quantitative PCR (q-PCR) and terminal restriction fragment length polymorphism (TRFLP), respectively. The co-existence of two inorganic nitrogen sources (ammonia and nitrate) had certain impact on simazine dissipation by the strain SD1. Bioaugmentation could induce a shift in the community structures of both AOA and AOB, but AOA were more responsive. Nitrogen application had significant impacts on AOA and AOB communities in bioaugmented soils. Moreover, in non-bioaugmented soil, the community structure of AOA, instead of AOB, could be quickly recovered after herbicide application. This study could add some new insights towards the impacts of nitrogen sources on s-triazine bioremediation and ammonia-oxidizing microorganisms in soil ecosystem.     

Catalytic hydrolysis of urea from wastewater using different aluminas by a fixed bed reactor

In order to find an effective method for treating urea wastewater, the experiments on the hydrolysis of urea in wastewater were conducted in a fixed bed reactor with different aluminas (α-Al₂O₃, γ-Al₂O₃, and η-Al₂O₃) as catalysts respectively in contrast with inert ceramic particle. The results indicate that the three alumina catalysts show obvious catalytic activity for urea hydrolysis at 125 °C. The order of activity is η-Al₂O₃?>?γ-Al₂O₃?>?α-Al₂O₃, and the activity difference increases with increasing temperature. According to the characterization results, surface acidity has little impact on the activity of catalyst. However, it was found that surface basicity of alumina catalyst plays an important role in catalytic hydrolysis of urea, and the activity of catalyst may be also influenced by the basic strength. With η-Al₂O₃ as catalyst, the urea concentration in wastewater is reduced to 4.96 mg/L at a temperature of 165 °C. Moreover, the η-Al₂O₃ shows a good stability for urea hydrolysis. The hydrolysis of urea over η-Al₂O₃ catalyst can evidently reduce the reaction temperature and is promising to replace industrial thermal hydrolysis process.