Determination of nickel in blood and serum samples of oropharyngeal cancer patients consumed smokeless tobacco products by cloud point extraction coupled with flame atomic absorption spectrometry

Oropharyngeal cancer is a significant public health issue in the world. The incidence of oropharyngeal cancer has been increased among people who have habit of chewing smokeless tobacco (SLT) in Pakistan. The aim of present study was to evaluate the concentration of nickel (Ni) in biological samples (whole blood, serum) of oral (n?=?95) and pharyngeal (n?=?84) male cancer patients. For comparison purposes, the biological samples of healthy age-matched referents (n?=?150), who consumed and did not consumed SLT products, were also analyzed for Ni levels. As the Ni level is very low in biological samples, a preconcentration procedure has been developed, prior to analysis of analyte by flame atomic absorption spectrometry (FAAS). The Ni in acid-digested biological samples was complexed with ammonium pyrrolidinedithio carbamate (APDC), and a resulted complex was extracted in a surfactant Triton X-114. Acidic ethanol was added to the surfactant-rich phase prior to its analysis by FAAS. The chemical variables, such as pH, amounts of reagents (APDC, Triton X-114), temperature, incubation time, and sample volume were optimized. The resulted data indicated that concentration of Ni was higher in blood and serum samples of cancer patients as compared to that of referents who have or have not consumed different SLT products (p?=?0.012–0.001). It was also observed that healthy referents who consumed SLT products have two to threefold higher levels of Ni in both biological samples as compared to those who were not chewing SLT products (p? Figure

?     

Exogenous salicylic acid mediated herbicide (Paraquat) resistance in cyanobacterial biofertilizer Microchaete sp. NCCU-342

Environmental Science and Pollution Research - Paddy field farming remains the dominant form of growing rice in modern times as the rice is the staple food for over half the world’s...     

Analysis of cadmium, nickel, and lead in commercial moist and dry snuff used in Pakistan

The extent to which smokeless tobacco endangers human health is an ongoing subject of debate. In this study, concentrations of toxic metals, cadmium (Cd), lead (Pb), and nickel (Ni), were measured in different snuff products (dry brown and black and moist green and brown), available and consumed in Pakistan. Concentrations of Cd, Pb, and Ni were determined in 23 samples of various brands of snuff by electrothermal atomic absorption spectrometry, after microwave-assisted acid digestion. The reliability of methodology was assured by analyzing certified reference material. The resulted data of toxic metals in different snuff products are comparable to the existing information with limited exceptions. It was estimated that 10 g intake of different types of snuff could contribute 14–68, 17–47, and 20–73 % of the provisional maximum tolerable daily intake for Cd, Ni, and Pb, respectively.     

Monitoring of copper accumulation in water,soil, forage,and cows impacted by heavy automobiles in Sargodha,Pakistan

Environmental Science and Pollution Research - The instant endeavor was undertaken to monitor copper (Cu) contents in water, soil, forage, and cow’s blood impacted by heavy automobiles in...     

Correlation of cadmium and aluminum in blood samples of kidney disorder patients with drinking water and tobacco smoking: related health risk

The combined exposure to aluminum (Al) and cadmium (Cd) causes more pronounced adverse health effects on humans. The kidneys are the main organs affected by internal exposure to Cd and Al via food and non-food items. The objective of present study was to measure the Al and Cd concentrations in cigarettes tobacco (branded and non-branded) and drinking water (domestic treated, ground and lake water) samples in southern part of Pakistan, to assess the risk due to ingestion of water and inhalation of cigarettes smoke containing high concentrations of both elements. The study population (kidney disorder and healthy) divided into two group based on consuming lake and ground water, while smoking non-branded cigarette as exposed, while drinking domestic treated water and smoking branded cigarette as non-exposed. Electrothermal atomic absorption spectrometry was used to determined Cd and Al concentrations in tobacco, drinking water and blood samples. The resulted data indicated that the levels of Al and Cd in lake and underground water were higher than the permissible limit in drinking water recommended by the World Health Organization. The biochemical parameters of exposed and referent patients, especially urinary N-acetyl-h-glucosaminidase, were used as a biomarkers of kidney disorder. Exposed kidney disorder patients have higher levels of Cd and Al than the exposed referents subjects, while difference was significant when compared to resulted data of non-exposed patients and referents (p = 0.01–0.001). The pearson correlation showed positive correlation between both toxic element concentrations in water, cigarettes versus blood samples of exposed subjects (r = 0.20–0.67 and 0.71–0.82), while lower values were observed for non-exposed subjects (r = 0.123–0.423 and 0.331–0.425), respectively.

     

Evaluation of fresh and stored rainwater quality in fluoride and arsenic endemic area of Thar Desert,Pakistan

In the current study, the chemistry of fresh and stored rainwater of Thar Desert, Pakistan, was estimated during two consecutive monsoon periods. The present research deals with the variation in physicochemical parameters, total arsenic (As^t), inorganic arsenic species (Asⁱ, As^V, As^III), and fluoride (F^?) in stored rainwater (SRW) at different time intervals (1 week to 3 months). The pH of fresh rainwater (FRW) samples showed slightly acidic to neutral in nature (6.08–7.06) which were inconsistent with the reference pH value (5.6) of rainwater. The resulted data indicated that As^t and F^? levels in SRW were enhanced with time duration. The levels of As^t and F^? in SRW after different time intervals were found in the range of 194–683 μg/L and 10–35.4 mg/L, respectively. The values of As^t and F^? were 20–70 and 7–24 times higher than those of WHO permissible limits, 10 μg/L and 1.5 mg/L, respectively. The As^III was dominant species in SRW, which corresponds to >60 % of Asⁱ. The characteristics of the SRW revealed an unacceptable quality to consume for drinking and agricultural purposes in the studied area.     

Carbaryl stress induced cellular changes in Calothrix brevissima

Cyanobacterial biofertilizers are affected by paddy field pesticides as nontarget organism. Carbaryl is a carbamate pesticide and is commonly used against rice thrip pest in paddy fields. In the present work, cellular changes caused by exposure of the cyanobacterial biofertilizer namely Calothrix brevissima to carbaryl were studied with special reference to fatty acids, electrolyte leakage, sulfur metabolism, and osmolytes. To study the toxic effect of carbaryl, the test cyanobacterium was exposed to varying concentrations of pesticide (0, 10, 20, 30, and 40 mg L^?1) for biochemical analyses. At 40 mg L^?1 carbaryl, polyunsaturated fatty acids were reduced by 32 % and membrane leakage was increased by 27 % suggesting that free radical-mediated lipid peroxidation took place. The sulfur-containing metabolites namely cysteine, cystine, and methionine were increased by 79, 64, and 52 %, respectively. The enzymatic and nonenzymatic antioxidants namely glutathione S-transferase, glutathione reductase, reduced glutathione, and oxidized glutathione were increased to 56, 71, 72, and 60 %, respectively. Osmolytes that serve as stress enzyme protectors as well as nonenzymatic free radical scavenger were also increased, indicating their protective nature in context with carbaryl-induced stress. The respective increase in mannitol, trehalose, and glycogen were 158, 98, and 159 %. In C. brevissima, carbaryl-induced membrane leakage was counteracted by increasing enzymatic and nonenzymatic parameters that helped in scavenging free radicals.     

Effect of liming on the distribution of heavy metals in untreated industrial sewage sludge produced in Pakistan for the cultivation of <Emphasis Type="Italic">Sorghum bicolor</Emphasis> (L.)

The recycling of sewage sludge on agriculture land represents an alternative, advantageous, disposal of this waste material. The aim of the present study was to evaluate the feasibility of using industrial sewage sludge, produced in Pakistan, as a fertiliser. Agricultural soil amended with 25% (w/w) sewage sludge with or without lime treatment was used for growing a variety of sorghum (PARC-SS-1). The mobility of the heavy metals (HMs) (Cd, Cu, Cr, Ni, Pb and Zn) and metalloid (As) in the untreated industrial waste water sewage sludge (UIWS) samples were assessed by applying a modified BCR (Community Bureau of Reference) sequential extraction procedure. The single extraction procedure comprised of the application of mild extractant (CaCl₂) and water for the estimation of the proportion of easily soluble metal fractions. The precision and accuracy of BCR was evaluated by using a certified reference material of soil amended with sewage sludge BCR 483. The plant available metal contents, as extracted by the deionised water and 0.01 M CaCl₂ solution and exchangeable fraction of BCR sequential, decreased with lime application in the range of 10–44% for As, Cr, Ni, Pb and Zn, except in the cases of Cd and Cu, where their mobility was increased by 10% and 24%, respectively. Sludge amendment enhanced the dry weight yield of sorghum and the increase was more obvious after liming up to 25%. The uptake of HMs were lower in test samples (3.2–21.8%), except for Cu and Cd, which was higher (4%), while they were below the permissible limit of these metals. The present experiment demonstrates that liming was important in factors facilitating the growth of sorghum in sludge-amended soil.     

A method for simulation of vapour cloud explosions based on computational fluid dynamics (CFD)

The effectiveness of the application of CFD to vapour cloud explosion (VCE) modelling depends on the accuracy with which geometrical details of the obstacles likely to be encountered by the vapour cloud are represented and the correctness with which turbulence is predicted. This is because the severity of a VCE strongly depends on the types of obstacles encountered by the cloud undergoing combustion; the turbulence generated by the obstacles influences flame speed and feeds the process of explosion through enhanced mixing of fuel and oxidant. In this paper a CFD-based method is proposed on the basis of the author’s finding that among the various models available for assessing turbulence, the realizable k-? model yields results closer to experimental findings than the other, more frequently used, turbulence models if used in conjunction with the eddy-dissipation model. The applicability of the method has been demonstrated in simulating the dispersion and ignition of a typical vapour cloud formed as a result of a spill from a liquid petroleum gas (LPG) tank situated in a refinery. The simulation made it possible to assess the overpressures resulting from the combustion of the flammable vapour cloud. The phenomenon of flame acceleration, which is a characteristic of combustion enhanced in the presence of obstacles, was clearly observed. Comparison of the results with an oft-used commercial software reveals that the present CFD-based method achieves a more realistic simulation of the VCE phenomena.