Hydrothermal synthesis of meso/macroporous BiVO4 hierarchical particles and their photocatalytic degradation properties under visible light irradiation

An ordered hierarchical meso/macroporous monoclinic bismuth vanadate (BiVO₄) particle was fabricated for the first time by a simple two-step melamine template hydrothermal method followed by calcination. The physiochemical parameters of as-prepared porous materials were characterized by means of X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, Raman, Barrett–Emmett–Teller, and UV–vis techniques. The nitrogen adsorption–desorption measurement and pore size distribution curve suggest that meso/macropores exist in these hierarchical microarchitectures. Further, it is found that melamine plays a significant role in the formation of porous BiVO₄ particles, and when a known amount of melamine was added, the surface area and pore size of such porous BiVO₄ particles were increased. The photocatalytic activities of the as-prepared hierarchical BiVO₄ samples were measured for the photodegradation of Congo red aqueous dye solution under visible light irradiation. Surprisingly, the porous BiVO₄ particles showed outstanding photocatalytic activities than polycrystalline BiVO₄ sample. The possible enhancement of such catalytic performance has also been further discussed.     

Green method of stemming the tide of invasive marine and freshwater organisms by natural filtration of shipping ballast water

Environmental Science and Pollution Research - Marine and freshwater pollution caused by transport of invasive species in shipping ballast water is a major global problem and will increase in...     

Source Apportionment Of Groundwater Pollution Around Landfill Site In Nagpur, India

The present work attempts statistical analysis of groundwater quality near a Landfill site in Nagpur, India. The objective of the present work is to figure out the impact of different factors on the quality of groundwater in the study area. Statistical analysis of the data has been attempted by applying Factor Analysis concept. The analysis brings out the effect of five different factors governing the groundwater quality in the study area. Based on the contribution of the different parameters present in the extracted factors, the latter are linked to the geological setting, the leaching from the host rock, leachate of heavy metals from the landfill as well as the bacterial contamination from landfill site and other anthropogenic activities. The analysis brings out the vulnerability of the unconfined aquifer to contamination.     

Pure and Mg-doped self-assembled ZnO nano-particles for the enhanced photocatalytic degradation of 4-chlorophenol

A novel self-assembled pure and Mg doped ZnO nano-particles （NPs） were successfully synthesized by a simple low temperature co-precipitation method. The prepared photocatalysts were characterized by X-ray diffraction, high resolution scanning electron mi- croscopy, high resolution transmission electron microscopy, diffuse reflectance spectroscopy and photoluminescence （PL） spectroscopy. The results indicated that the prepared photocatalysts showed high crystallinity with a uniform size distribution of the NPs. The degradation of cholorphenols is highly mandatory in today＇s scenario as they are affecting the environment adversely. Thus, the photocatalytic degradation of 4-chlorophenol （4-CP）, a potent endocrine disrupting chemical in aqueous medium was investigated by both pure and Mg-doped ZnO NPs under UV-light irradiation in the present study. The influence of the Mg content on the structure, morphology, PL character and photocatalytic activity of ZnO NPs were investigated systematically. Furthermore,the effect of different parameters such as 4-CP concentration, photocatalyst amount, pH and UV-light wavelength on the resulting photocatalytic activity was investigated.     

Reduced combustion mechanism for C1–C4 hydrocarbons and its application in computational fluid dynamics flare modeling

Emissions from flares constitute unburned hydrocarbons, carbon monoxide (CO), soot, and other partially burned and altered hydrocarbons along with carbon dioxide (CO₂) and water. Soot or visible smoke is of particular concern for flare operators/regulatory agencies. The goal of the study is to develop a computational fluid dynamics (CFD) model capable of predicting flare combustion efficiency (CE) and soot emission. Since detailed combustion mechanisms are too complicated for (CFD) application, a 50-species reduced mechanism, LU 3.0.1, was developed. LU 3.0.1 is capable of handling C₄ hydrocarbons and soot precursor species (C₂H₂, C₂H₄, C₆H₆). The new reduced mechanism LU 3.0.1 was first validated against experimental performance indicators: laminar flame speed, adiabatic flame temperature, and ignition delay. Further, CFD simulations using LU 3.0.1 were run to predict soot emission and CE of air-assisted flare tests conducted in 2010 in Tulsa, Oklahoma, using ANSYS Fluent software. Results of non-premixed probability density function (PDF) model and eddy dissipation concept (EDC) model are discussed. It is also noteworthy that when used in conjunction with the EDC turbulence-chemistry model, LU 3.0.1 can reasonably predict volatile organic compound (VOC) emissions as well.

Implications: A reduced combustion mechanism containing 50 C₁–C₄ species and soot precursors has been developed and validated against experimental data. The combustion mechanism is then employed in the computational fluid dynamics (CFD) of modeling of soot emission and combustion efficiency (CE) of controlled flares for which experimental soot and CE data are available. The validated CFD modeling tools are useful for oil, gas, and chemical industries to comply with U.S. Environmental Protection Agency’s (EPA) mandate to achieve smokeless flaring with a high CE.     

Prenatal diagnosis of mucopolysaccharidosis type VII facilitating treatment in neonatal period

Duo exome testing was performed on a fetus conceived via in vitro fertilization with an egg donor. The fetus presented with non-immune hydrops fetalis (NIHF) at 20 + 0 weeks gestation. Two variants were detected in the GUSB gene. Biallelic pathogenic variants cause mucopolysaccharidosis type VII (MPS-VII), which can present with NIHF prenatally. At the time of analysis and initial report, one variant was classified as likely pathogenic and the other as of uncertain clinical significance. Biochemical testing of the amniotic fluid supernatant showed elevated glycosaminoglycans and low β-glucuronidase activity consistent with the diagnosis of MPS-VII. This evidence allowed the upgrade of the pathogenicity for both variants, confirming the diagnosis of MPS-VII. The infant was born at 36 + 5 weeks and enzyme replacement therapy (ERT) using vestronidase was initiated at 20 days with planning for hematopoietic stem cell transplant ongoing. The ERT therapy has been well tolerated, with decreasing quantitative urine glycosaminoglycans. Long-term follow up is required to determine whether treatment has been successful. This case demonstrates the utility of alternative testing methods to clarify the pathogenicity of variants and the clinical utility of obtaining a diagnosis antenatally in facilitating treatment in the neonatal period, and specifically highlights MPS-VII as a treatable cause of NIHF.     

Trends of organochlorine pesticides in drinking water supplies

The effectiveness of the treatment process for the removal of pesticides in the final water supplies in Delhi has been evaluated. Samples were collected during 2000–2005 from five water treatment plants (WTPs). Analysis was carried out to identify pesticides, which are more commonly encountered in treated drinking water. In most of the treatment plants, the concentrations of lindane, total endosulphan and total DDT were significantly less in the finished water. Monitoring of these less soluble pesticide in the finished water from WTPs was done quarterly to arrive at the quality trends and to plan for the mitigation action, in case the concentration of the parameter exceeded at any site or time.     

Development of an Overall Index of Pollution for Surface Water Based on a General Classification Scheme in Indian Context

Various National and International Agencies involved in water quality assessment and pollution control have defined water quality criteria for different uses of water considering different indicator parameters. Classification schemes for water quality criteria/standards developed by these agencies differ inaddition to terminologies used such as Action level, Guide level etc. in defining the concentration values in these classes. In the present article a general classification scheme viz. Excellent,Acceptable, Slightly Polluted, Polluted and Heavily Polluted water is proposed for surface water quality assessment. The concentration ranges in these classes are defined in Indianscenario considering Indian Standards and CPCB criteria. Standardsby the European Community (EC), WHO etc. and the reported factsabout the pollution effects of important water quality indicatorparameters on the surrounding were also taken into account. Themathematical equations to transform the actual concentrationvalues into pollution indices are formulated and correspondingvalue function curves are plotted. Based on the individual indexvalues, an `Overall Index of Pollution' (OIP) is estimated. Theapplication of OIP is demonstrated at a few sampling stations onriver Yamuna based on observed water quality data. The general classification scheme along with concentrationranges defined in these classes will be of immense use fordetermining the surface water quality status with reference tospecific individual parameter, and the OIP for assessing theoverall water quality status in Indian context.