The regulatory role of endogenous iron on greenhouse gas emissions under intensive nitrogen fertilization in subtropical soils of China

Environmental Science and Pollution Research - Anaerobic batch experiments were conducted to study the regulatory role of endogenous iron in greenhouse gas emissions under intensive nitrogen...     

Predicted no-effect concentrations for mercury species and ecological risk assessment for mercury pollution in aquatic environment

Mercury(Hg) exists in different chemical forms presenting varied toxic potentials. It is necessary to explore an ecological risk assessment method for different mercury species in aquatic environment. The predicted no-effect concentrations(PNECs) for Hg(Ⅱ) and methyl mercury(Me Hg) in the aqueous phase, calculated using the species sensitivity distribution method and the assessment factor method, were 0.39 and 6.5 × 10-3μg/L, respectively. The partition theory of Hg between sediment and aqueous phases was considered, along with PNECs for the aqueous phase to conduct an ecological risk assessment for Hg in the sediment phase. Two case studies, one in China and one in the Western Black Sea, were conducted using these PNECs. The toxicity of mercury is heavily dependent on their forms,and their potential ecological risk should be respectively evaluated on the basis of mercury species.     

海水中亚硝化细菌的分离鉴定研究

从海水样品中分离到1株严格自养的氨氧化细菌GW201210,对该株茵的形态特征、培养特性、生理生化特性等生物学特性进行了初步研究。结果表明,它为革兰氏染色阴性,无鞭毛,不产芽孢,细胞短杆状,呈单个排列或排列成直线。该菌株能将氨氮氧化成亚硝酸盐,不能还原硝酸盐,能利用CO2,在7％NaCl条件下生长,在肉汤培养基中不生长,其特性均符合亚硝酸菌的特征,并用PCR方法扩增该菌株的16SrDNA基因,进行16SrDNA序列比较、同源性分析并构建系统发育树,将菌株GW201210初步鉴定为亚硝化单胞菌属（Nitro．somonascommunis）o     

潘多拉菌LX-1菌株对二氯甲烷的降解特性研究

从某污水处理厂的活性污泥中分离筛选到一株能以二氯甲烷为唯一碳源和能源生长的好氧降解菌LX-1(Pandoraea pnomenusa LX-1).单因素试验表明,适宜菌株LX-1生长的pH和环境温度分别为7.0和35℃,培养基里添加1%的NaCl有助于LX-1的生长及对DCM的降解,二氯甲烷的最大耐受浓度达到了1500mg·L-1.菌株LX-1降解1mg二氯甲烷能产生0.8083mg Cl-和0.3838mg CO2,脱氯率和矿化率分别达到了96.8%和74.15%.培养液中可溶性有机碳含量随降解时间变化呈上升趋势,pH呈下降趋势,结合相关文献报道,推测菌株在代谢二氯甲烷的过程中产生了水溶性小分子酸类(如甲酸)等结构较为简单的有机物,它们最终将被矿化为CO2、H2O和细胞生物量.     

基于河岸带地球化学特征的河水-地下水交互边界识别——以广州市流溪河为例

河水-地下水交互作用对河流水质净化、流域水生态健康和河岸土地合理规划具有重要意义.本文以广州市流溪河为研究对象,实时监测河水和河岸带地下水基本理化指标并采集水样和土样进行水体主离子、氮形态、金属离子浓度、氘(δD)氧(δ~(18)O)同位素和土壤渗透系数(K)测试分析.结果表明:监测期间以河水侧向补给地下水为主,对地下水水位的影响范围在距河岸10 m内;距河岸1 m处地下水溶解氧(DO)浓度、电导率(EC)和氧化还原电位(ORP)变化明显,变异系数(n=7)分别为30.9%、42.0%和44.4%.河水和河岸带地下水水化学类型均为HCO_3-Ca型,受碳酸盐岩风化控制.河水入渗补给地下水初期,河岸带含水层向还原环境转化(ORP平均下降92.25 mV),非饱和带Mn氧化物发生还原性溶解,地下水中Mn~(2+)浓度逐渐增加并达最大值(0.52 mg·L~(-1));基于δD、δ~(18)O和Cl~-浓度的混合模型估算的河水对距河岸5 m处地下水的贡献率分别为10.4%、11.6%和11.5%,表明监测断面河水-地下水交互边界约在距河岸5 m处.     

制革废水中好氧反硝化菌的筛选及其特性

从制革废水中分离得到1株好氧反硝化菌ZY1,并对ZY1的反硝化能力进行了研究。通过16S rDNA序列分析,确定ZY1为地衣芽孢杆菌(Bacillus licheniformis)。在初始NO2--N质量浓度为80 mg/L、DO为5.7 mg/L、废水温度为30℃、废水pH为8.0、废水中Cr3+质量浓度为110 mg/L、反应时间为24 h的条件下,ZY1菌对NO2--N的降解率大于98%。     

采用冲击加速度指标评价安全帽抗侧向冲击性能的研究

安全帽是应用最为广泛的一种重要的劳动作业人员头部安全防护用品,广泛使用在机械、建筑、矿山、交通、冶金、电力等行业中。在实际工作中,作业人员除可能受到来自顶部的坠落冲击外,还切实存在着受到侧面冲击的可能。现行安全帽国家标准主要采用头部受到的冲击力数值大小作为依据评价安全帽防护性能的优劣,此种方法无法用来考察安全帽的抗侧向冲击性能。本文讨论引入冲击加速度作为新的评价指标,以达到科学评价安全帽抗侧向冲击防护性能的目的。     

“真菌-细菌”复合菌剂的构建及其降解α-蒎烯、乙酸丁酯和邻二甲苯混合废气的性能研究

以α-蒎烯、乙酸丁酯和邻二甲苯3株高效降解菌为菌源(2株真菌和1株细菌),通过对比单菌单底物和多菌多底物降解效果,确定这3株菌之间不存在抑制效应,可用于构建"真菌-细菌"复合菌剂.考察了复合菌剂与活菌液的降解性能及对饥饿期的响应,结果表明复合菌剂和活菌液均能较完全地降解底物,但经历饥饿期后,复合菌剂对底物仍保持100%的降解率,而活菌液对α-蒎烯和邻二甲苯的去除率只有94.6%和62%.该菌剂具有较好的稳定性,常温保存180 d后对各初始浓度为120 mg·L-1的α-蒎烯、乙酸丁酯和邻二甲苯24 h内去除率为48.2%、95.1%和57.3%.将复合菌剂与活性污泥分别接种于生物过滤塔,复合菌剂能明显缩短生物膜形成时间,接种的反应器对底物总去除率维持在90%左右,而活性污泥只有60%.     

荧光假单胞菌代谢α-蒎烯过程中表面活性物质的定向积累及其性状分析

从处理α-蒎烯的生物滴滤塔中分离到一株荧光假单胞菌PT,该菌株在代谢α-蒎烯的过程中能产生具有表面活性的物质.通过优化培养基,使得菌株在降解过程中能最大程度地积累表面活性的代谢产物,培养液的表面张力下降至30 mN·m-1.采用红外光谱、薄层色谱等分析方法对分离得到的油状产物进行鉴定,并结合α-蒎烯的微生物代谢途径,确定该表面活性物质为紫苏酸,分子式为C10H14O2.这类物质对柴油和正己烷有较明显地乳化作用,乳化指数达到40％～60％,对多环芳烃(菲、萘、芘)也有明显地增溶效果,在其临界胶束浓度时水中溶解度分别提高了2.65％、6.07％和10.0％.以上结果表明,该表面活性物质可替代化学表面活性剂广泛用于环境污染的修复治理中.     

Synthesis, characterization, and photocatalytic activity of porous La–N–co-doped TiO2 nanotubes for gaseous chlorobenzene oxidation

The photocatalytic oxidation of gaseous chlorobenzene(CB) by the 365 nm-induced photocatalyst La/N–Ti O2, synthesized via a sol–gel and hydrothermal method, was evaluated. Response surface methodology(RSM) was used to model and optimize the conditions for synthesis of the photocatalyst. The optimal photocatalyst was 1.2La/0.5N–Ti O2(0.5) and the effects of La/N on crystalline structure, particle morphology, surface element content, and other structural characteristics were investigated by XRD(X-ray diffraction), TEM(Transmission Electron Microscopy), FTIR(Fourier transform infrared spectroscopy), UV–vis(Ultraviolet–visible spectroscopy), and BET(Brunauer Emmett Teller). Greater surface area and smaller particle size were produced with the co-doped Ti O2 nanotubes than with reference Ti O2. The removal of CB was effective when performed using the synthesized photocatalyst,though it was less efficient at higher initial CB concentrations. Various modified Langmuir-Hinshelwood kinetic models involving the adsorption of chlorobenzene and water on different active sites were evaluated. Fitting results suggested that competitive adsorption caused by water molecules could not be neglected, especially for environments with high relative humidity. The reaction intermediates found after GC–MS(Gas chromatography–mass spectrometry) analysis indicated that most were soluble, low-toxicity, or both. The results demonstrated that the prepared photocatalyst had high activity for VOC(volatile organic compounds) conversion and may be used as a pretreatment prior to biopurification.