Aluminium speciation in effluents and receiving waters

The respective speciation of aluminium in sewage effluent and in river water receiving effluent, has been examined. Results showed that concentrations of reactive aluminium changed over a timescale of hours and were controlled predominantly by pH. A minimum concentration of reactive aluminium occurred at a pH of approximately 6.8, coinciding with the prevalence of non-reactive, insoluble Al(OH)3 species. For receiving waters of low pH value, typically < pH 5, a large proportion of the 'naturally present' aluminium can be present in a reactive form at concentrations higher than the proposed Environmental Quality Standard (EQS). Mixing of waters of this type with effluent of a higher pH value leads to the precipitation of aluminium hydroxide. Mixing of effluent of pH value in the range 7.5-8.0 with river water in the same (or slightly higher) pH range appears to result in no appreciable change in the proportion of reactive aluminium; the change in concentration tends to be related simply to dilution. On the basis of a theoretical knowledge of aluminium speciation, results obtained in this work indicate that it is possible to make predictions about the proportion of reactive aluminium present in a receiving water, based on the pH values of the effluent water mixture and the concentration in the effluent. Reasonable comparisons between measured and predicted values were obtained at higher pH values, but the relationship was less certain at pH values less than 6.5 for which levels of reactive metal tended to be higher than the quality standard value.     

Chromium redox speciation in natural waters

Dissolved hexavalent chromium concentrations were determined in river, estuarine and coastal waters of the Humber catchment in north-east England. Samples were collected, filtered, extracted on site and after storage for up to eight days. Hexavalent chromium concentrations did not change by more than 0.05 microg l(-1) (not significant, p = 0.05) over this period. Total chromium concentrations in the catchment were less than 1.0 microg l(-1). This is low in relation to the proposed Environmental Quality Standard. Hexavalent chromium accounted for between 27% and 100% of the total dissolved concentration, with an average of approximately 50%. The proportion of Cr(III) and Cr(VI) in the rivers and estuary were of the same range as previously measured in 1993. The addition of Cr(III) and Cr(VI) to fresh and saline water samples illustrates the complexity of the factors controlling chromium speciation in natural waters. The presence of oxidisable organic matter and the stabilising role of complexing organic ligands are proposed as the main controlling influences of redox speciation in filtered samples.     

A spatial approach to combatting wildlife crime

Poaching can have devastating impacts on animal and plant numbers, and in many countries has reached crisis levels, with illegal hunters employing increasingly sophisticated techniques. We used data from an 8‐year study in Savé Valley Conservancy, Zimbabwe, to show how geographic profiling—a mathematical technique originally developed in criminology and recently applied to animal foraging and epidemiology—can be adapted for use in investigations of wildlife crime. The data set contained information on over 10,000 incidents of illegal hunting and the deaths of 6,454 wild animals. We used a subset of data for which the illegal hunters’ identities were known. Our model identified the illegal hunters’ home villages based on the spatial locations of the hunting incidences (e.g., snares). Identification of the villages was improved by manipulating the probability surface inside the conservancy to reflect the fact that although the illegal hunters mostly live outside the conservancy, the majority of hunting occurs inside the conservancy (in criminology terms, commuter crime). These results combined with rigorous simulations showed for the first time how geographic profiling can be combined with GIS data and applied to situations with more complex spatial patterns, for example, where landscape heterogeneity means some parts of the study area are less likely to be used (e.g., aquatic areas for terrestrial animals) or where landscape permeability differs (e.g., forest bats tend not to fly over open areas). More broadly, these results show how geographic profiling can be used to target antipoaching interventions more effectively and more efficiently and to develop management strategies and conservation plans in a range of conservation scenarios.     

Pyrene bioavailability; effect of sediment-chemical contact time on routes of uptake in an oligochaete worm

Bioavailability of sediment-sorbed compounds may vary with increasing contact time. This may result in the dietary uptake route becoming more significant as conditions in the gut flora aid the extraction of contaminants, which have migrated into sites within the sediment particle. Such mechanisms may have important implications on risk assessments performed on substances released into the environment. A series of experiments were carried out using sediment spiked with 14C-labelled pyrene, a polycyclic aromatic hydrocarbon. The sediment was left at room temperature over a period of 220 days. Periodically (at 0, 1, 14, 28, 70, 220 days) the sediment was used to perform a bioaccumulation study using the freshwater oligochaete Lumbriculus variegatus. A novel methodology using feeding and (decapitated) non-feeding worms, allowed differentiation between uptake via ingestion and simple sorption. Results showed that there was a decline in bioavailability with time and that this was a 3 stage process. A rapid initial decline was observed over the first day when a 40% decrease was measured, an intermediate period were levels remained stable (day 14 to day 70) and an ultimate decrease in pyrene activity in worm tissue of 70% after 220 days. Over this period the chemical extractability of pyrene also decreased by 50%, as the chemical migrated deeper into unavailable sites within the sediment matrix. Normalising bioavailability to the chemically extractable fraction of pyrene within the sediment provided an overall decrease in bioavailability of 58%. The importance of the dietary route of uptake for pyrene varied during the sediment aging process, reflecting the changes in the physico-chemical interactions between the pyrene, sediment and pore water.     

European union system for the evaluation of substances: the second version

This publication presents major changes in the assessment of the risks of chemicals to human health and the environment as implemented in the second version of the European Union System for the Evaluation of Substances, EUSES 2.0. EUSES is a harmonised quantitative risk assessment tool for chemicals. It is the PC-implementation of the technical guidelines developed within the framework of EU chemical legislation for industrial chemicals and biocides. As such, it is designed to support decision making by risk managers in government and industry and to assist scientific institutions in the risk assessment for these substances. The development of EUSES 2.0 is a co-ordinated project of the European Chemicals Bureau, EU Member States and the European chemical industry. Several model concepts, the technical background and the user interface of EUSES have been improved considerably. Major changes in the environmental assessment such as the implementation of emission scenario documents for industrial chemicals and biocides, the addition of the marine risk assessment, the enhancement of the regional model to include global scales, and improvements in the secondary poisoning and environmental effects modelling will be discussed. The update of the human risk assessment module in EUSES focuses on the risk characterisation for both threshold and non-threshold substances with, among others, the introduction of assessment factors. The performance of EUSES is illustrated in an example showing the human and environmental risk assessment of a sanitation disinfectant for private use.     

A rule-based screening environmental risk assessment tool derived from EUSES

Within the context and scope of the forthcoming European Union chemical regulations (REACH), there is a need to be able to prioritise the chemicals for evaluation. Therefore, a simple, pragmatic and adequately conservative approach for the identification of substances of very low or no immediate concern at an early stage is presented. The fundamental principles and basic concepts are derived from the EU Technical Guidance Document and EUSES, and are translated into an easy-to-use rule-based system. For this development, the effect on risk characterisation ratios (RCRs) of the key environmental parameters in EUSES was quantified (taking into account several standardised chemical release scenarios). Using statistical analysis, ranges were identified for each key parameter, within which the end result of the assessment was not significantly affected. This information was then translated into a lookup table from which environmental risk characterisation ratios can be directly read as a function of a few parameters.     

Sources of priority substances entering an urban wastewater catchment--trace organic chemicals

The implementation of new legislation such as the Water Framework Directive (WFD) requires Member States to gain a better understanding of priority substances entering surface waters. This will include inputs from wastewater treatment works as well as from other urban, industrial and agricultural sources. There is currently a lack of available data regarding the magnitude and sources of organic priority substances entering treatment works. As a consequence the concentrations of organic priority substances including PAHs, surfactants, polybrominated diphenylethers (PBDEs), diethylhexyl phthalate (DEHP), pesticides and solvents were determined in the wastewater from an urban catchment located in the UK, as part of a project undertaken for UK Water Industry Research (UKWIR). Most organic priority substances were detected in the microg/l range. Significant variations in the concentration of linear alkylbenzene sulphonate (LAS), DEHP, PBDEs and nonylphenol ethoxylates (NPEOs), in particular, were observed for the different sources. The greatest differences were evident between new and older domestic discharges. Solvent levels varied considerably reflecting use and production within the catchment. Chloroform levels were highest in domestic effluent, while trichloroethene and tetrachloroethene were detected only in commercial samples.     

Assessment of bioconcentration and secondary poisoning of surfactants

The relevance of the bioconcentration behaviour of surfactants for the secondary poisoning assessment and for the risk characterisation in the bird and mammalian food chain has been investigated. The approach used is described in the recently revised EU Technical Guidance Document for the Risk Assessment of Substances. The results demonstrate that, based on experimentally derived bioconcentration factors, environmental concentrations and effects in animals, there is a clear level of safety for both linear alkylbenzene sulphonate (LAS) and alcohol ethoxylates (AE), the most important surfactants by volume. To assess other surfactants used in detergents, a bioconcentration factor that would need to be attained for secondary poisoning to be of concern has been estimated from predicted environmental concentrations and known long-term effects data in animals. Based on the known structural similarity of these surfactants to LAS and AE and the ubiquitous nature of the enzymatic systems that are present in biotransformation processes in organisms, it is concluded that bioconcentration of these surfactants to these levels is highly unlikely. Therefore the potential for secondary poisoning effects of these surfactants is extremely low.     

Processes of distribution of pharmaceuticals in surface freshwaters: implications for risk assessment

The global consumption and production of pharmaceuticals is increasing concomitantly with concern regarding their environmental fate and effects. Active pharmaceutical ingredients are mainly released into the aquatic environment through wastewater effluent discharge. Once in the environment, pharmaceuticals can undergo processes of natural attenuation, i.e. dilution, sorption, transformation, depending on physico-chemical properties of the compound, such as water solubility, lipophilicity, vapour pressure, and environmental conditions, such as pH, temperature and ionic strength. A major natural attenuation process is the sorption on dissolved organic matter, colloids, suspended solids and sediments, which in turn control pharmaceuticals distribution, residence time and persistence in aquatic systems. Here we review studies of sorption capacity of natural sorbents to pharmaceuticals. These report on the importance of several environmental and sorbent-specific properties, such as the composition, quality, and amount of the sorbent, and the environmental pH, which determines the speciation of both the sorbent and compound. The importance of accounting for distribution processes on freshwater sorbents for any determination of environmental concentrations of pharmaceuticals is apparent, while the reliability of surrogate standards for measuring dissolved organic matter (DOM) distribution is evaluated in the context of the need for robust environmental risk assessment protocols.     

Chronic toxicity of sediment-associated linear alkylbenzene sulphonates (LAS) to freshwater benthic organisms

The toxicity of linear alkylbenzene sulphonates (LAS), to freshwater benthic organisms was assessed during exposure to spiked sediment. Lethal and sub-lethal end-points were monitored for two organisms (oligochaete Lumbriculus variegatus and nematode Caenorhabditis elegans). Results demonstrated relatively low toxicity (LOECs>100 mg/kg dry weight). No observed effect concentrations (NOECs) of 81 mg/kg dw (Lumbriculus) and 100 mg/kg dw (Caenorhabditis) were determined. For the oligochaete, no specific endpoint was particularly sensitive to LAS. For the nematode, egg production was the most sensitive endpoint. Significant degradation was measured over the 28-day duration of the Lumbriculus study, equating to a half-life of 20 days in sediment.