Hydrogeochemical data as a tool for exploration and mapping: a case study from part of Afikpo Basin southeastern Nigeria

Fourteen (14) characters from six (6) water samples collected from springs, ponds, and streams located in Lower Cretaceous sedimentary area of Afikpo Basin have been analyzed. These include pH, turbidity, conductivity, total dissolved solid, hardness, Fe²⁺, Ca²⁺, Mg²⁺, K⁺, NO₃ ^?, Cl^?, SO₄ ^2?, and Na⁺. These sediments, which are Turonian and Coniacian in age, are subdivided into two by a basic rock dyke. Results of the analyses show clearly that the Turonian sediments, intruded by dolerite, have net Fe²⁺, HCO₃ ^?, Ca²⁺, Mg²⁺, Mn²⁺, Cl^?, and SO₄ ^2? concentration while those from the younger Coniacian sediment have net higher amounts of K⁺, Na⁺, and Mn²⁺. The overriding mafic minerals in the basic intrusive rock possibly led to higher leaching into ground water system near it. On the other hand, the presence of feldsparthic to kaolinitic sands of the younger Coniacian units led to higher K⁺ and Na⁺ matter in the water from these zones. The formations dip away from the older sediments. Concentrations of these characters are within acceptable drinking water standards by World Health Organization but noticeable anomalous zones for Fe²⁺, Mg²⁺, and Ca²⁺ are zones of basic rock suites. Areas with greater Na⁺ and K⁺ are traceable to sandy units. It is thus concluded that more analysis of surface, subsurface, and pond water samples can be utilized for minerals search and geological mapping. At this stage, it forms a veritable reconnaissance tool.     

The impact of handpump corrosion on water quality in rural areas of West African sub-region

Water, even in its natural environment, contains some level of impurities. Water is nearly a universal solvent. It contains dissolved solids and gases, and hosts a number of micro-organisms. The exploitation of groundwater by means of boreholes for supplying small user groups and rural communities with water has been widely applied in certain parts of the world for several decades. In recent years this practice has spread all over the globe, and hundred of thousands of boreholes have beendrilled to tap low-yield aquifers. It is evident that such boreholes require pumps for lifting thewater. In developing countries these are usually handpumps, butsolar as well as other systems with submersible pumps are also used, depending upon the energy sources available and the financial means of the beneficiaries. This article gives a general overview of groundwater quality with regard to itsphysico-chemical composition. The results presented originatefrom the experience gained from handpump equipped boreholes within the UNICEF through German Centre for Technical EducationTransfer executed inter-regional UNDP-Handpumps Project inWest African Regions. Particular attention is paid to presenting corrosion onthe water quality of wells in terms of iron concentrationand other parameters. Furthermore, the corrosion attack ongalvanised iron, the effect of biofilms on the corrosionrate, and the difference between internal and externalcorrosion of rising mains are shown.     

The Impact of Urbanization and Protection of Water Resources in Owerri and Environs SE, Nigeria

Untreated sewage and agriculture are the most important sources of contamination. The study was carried out by conducting a short-term surface water and groundwater pollution survey of the Owerri Urban area and its environs, in order to establish the current levels of pollution. An attempt has been made to show the relationships between pollution levels, population density, industrial and agricultural activities. The spatial distribution of pollutants due to a poor land use system and to human activities was investigated. This emphasises integrated planned development as a preventive measure for arresting pollution levels in fast growing urban centres. The total groundwater stored in the area amounts to 7.87 × 10⁹ m³. Twenty five percent of this is released as base flow into the adjacent rivers (Otamiri and Nworie). The annual groundwater recharge is 3.4 × 10⁹ m³. The enormous volume of groundwater stored and the comparatively low cost of development makes groundwater an excellent alternative supply source for the area (Uma et al., 1984).     

Estimation of 1999-2004 dietary daily intake of PCDDs, PCDFs and dioxin-like PCBs by a total diet study in metropolitan Tokyo, Japan

A study of the dietary intake of dioxins, consisting of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (dioxin-like PCBs) through foods retailed in the metropolitan Tokyo area from 1999 to 2004 was carried out by the total diet-market basket method on the basis of food classification (14 groups) and the data on food consumption in the Tokyo region obtained from the Japan Nutrition Survey. The daily intake of dioxins per kg of body weight for a 50 kg average adult body was 2.18 pg TEQ/kg/day in 1999, 1.87 pg TEQ/kg/day in 2000, 1.25 pg TEQ/kg/day in 2001, 1.60 pg TEQ/kg/day in 2002 and 2003 and 1.55 pg TEQ/kg/day in 2004, respectively. These amounts were less than the tolerable daily intake (TDI) of 4 pg TEQ/kg/day for dioxins established in Japan. The dioxins taken daily through fish and shellfish (group 10) accounted for more than 50% of sum WHO-TEQs. In addition, more than 90% of the daily intake of dioxins was taken through fish and shellfish (group 10), meat and eggs (group 11), milk and dairy products (group 12). Also, this study clearly showed that the ratio of dioxin-like PCBs in the daily intake of dioxins was increasing yearly because the reduction rate of dioxin-like PCBs was lower than that of PCDDs and PCDFs in foods.     

A probabilistic economic model and sensitivity analysis of fuel-oil production from plastic waste

Journal of Material Cycles and Waste Management - Pyrolysis of plastic waste has been studied for many years, but there are only a few commercial plants in the world. A probabilistic economic model...     

Toward maximizing the recycling rate in a Sapporo waste plastics liquefaction plant

Sapporo Plastics Recycling Co., Ltd., (SPR) started its commercial operation of waste plastics liquefaction in 2000. At first only hydrocarbon oil was reclaimed, this being derived from the waste plastics liquefaction process under the Japanese Containers and Packaging Recycling Law. Presently, thermal degradation residue and hydrochloric acid are being produced as by-products in addition to the hydrocarbon oil. As a result, the SPR plastics liquefaction plant has achieved a high reclamation rate of 96%, and 93% of the recycled products have been reused in Hokkaido, where SPR is located. The technical problems caused by corrosion and clogging have been solved. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Persistence and vertical distribution of termiticide fipronil in modified ground board test

Fipronil termiticide belongs to phenyl-pyrazole class of chemical compounds. It has broad-spectrum activity particularly against house hold pests such as cockroaches, mosquitoes, locusts, ticks, and fleas at both larval and adult stages. At high dosage it can be used to control subterranean termites in building foundations. To evaluate long term efficacy against termites the persistence and vertical distribution of fipronil was studied under natural weather conditions of Dehradun, India. Fipronil was applied at four concentrations i.e. 0.05, 0.1, 0.25 and 0.5% a.i ha⁻¹ by drenching 17 × 17 in.² plot prepared as per modified ground board test. Soil samples were collected after 22, 38 and 56 months of treatment up to the depth of 75 cm. The soil core was cut into five distinct sections i.e. 0–15, 15–30, 30–45, 45–60 and 60–75 cm depth. The residues were extracted by shaking 20 g soil sample with acetone. The acetone extract was concentrated and cleaned-up over florisil column. Fipronil residues were estimated on GLC at 220, 260, and 300°C oven, injector and detector temperature respectively. Fipronil was found to persist beyond 56 months after application. Two metabolites viz. desulfinyl and sulfide-fipronil were detected in sampling after 22 months of application that also dissipated with time. Fipronil residues were found up to 60 cm depth. The residues in deeper layers dissipate slowly with time and after 56 months of treatment residues were detected only up to 30 cm depth.     

An appraisal of subsurface geology and groundwater resources of Owerri and environs based on electrical resistivity survey and borehole data evaluation

The research was aimed at determining the depth to the watertable, aquifer thickness and subsurface geology of the studyarea thus revealing its groundwater distribution as well as its potential as a substitute to the surface water resources.Vertical electrical soundings were carried out in the study area with maximum electrode spread. The Schlumberger electrode configuration technique was adopted. VES data were processedusing Schlumberger analysis package. Lithologic logs of alreadyexisting boreholes in the study area were collected, evaluatedand comparison were carried out. The results reveal alternatinglayers of sands, sandstones, gravel and clay. The lithologiclogs revealed that the study area is underlain by coastal sands (Benin formation). The water table varies from 10–64 m and thickness of the aquifer ranges from 20–80 m. Results show that the study area is underlain by a thick extensive aquifer that has a transmissivity of 2.8 × 10^-2m² s^-1 to 3.3 × 10^-1m² s^-1 and storativity 1.44 × 10^-4 to 1.68 × 10^-3m s^-1 values. The specific yield is about 0.31.The sandy component of the study area forms more than 90% ofthe sequence, therefore the permeability, the transmissivity andthe storage coefficient are high with an excellent source of groundwater resources.     

Water pollution in relation to mineral exploration: a case study from Alayi-Ovim area of Southeastern Nigeria

Water samples from rivers, streams, springs, and shallow wells in Alayi-Ovim area of southeast Nigeria have been analyzed for Pb, Ca, Mg, Fe, Mg, PO₄, NO₃, CO₃, SO₄, Cl, and pH. The analyses were carried out using atomic absorption spectrometer and Hach Direct Reading Equipment. Results of the analyses from the area conform to the WHO (1995) standards for drinking water. However, the results show relative enrichment of Ca, pH, Mg, CO₃, and Cl. Low values were obtained for Fe, SO₄, and NO₃. While the Cl and Pb enrichment in the area north of Alayi-Ovim axis is attributed to proximity to the lead–zinc and chloride-rich formations of the Turonian Eze-Aku and the Albian Asu River; the Ca, Mg, SO₄, and CO₃ enrichment in Southern part of Alayi-Ovim is due to the limestone-bearing Late Maastrichtian Nsukka Formation. Furthermore, the very low values of less than 5 ppm for these characters in water in the central region correlate well with the relatively clean Maastrichtian quartz arenite Ajali Sandstone Formation. The Pb–Zn and Cl incursions into the water system from the Older Albian Asu River/Turonian Eze-Aku Formations in the northern part of Alayi-Ovim area and the leaching of Mg, and Ca into the water system in the Maastrichtian limestone area in the south thus constitute geochemical indices for chemical pollution and mineral exploration for brine and dolomitic limestone in the area.     

Study on dechlorination technology for municipal waste plastics containing polyvinyl chloride and polyethylene terephthalate

It is necessary to remove chlorine efficiently from municipal waste plastics (MWP) that contain polyvinyl chloride (PVC) and other plastics containing chlorine. In this article we consider thermal degradation liquefaction technology. In Japan, the chlorine content of reclamation oil products must be kept below 100 ppm owing to the quality standard for pyrolysis oil. Liquefaction dechlorination technology for MWP is still an important issue to study. The twin-screw extruder that has been developed as dechlorination technology for blast furnaces and coke ovens has a shorter residence time for dechlorination than other dechlorination technologies. In this article, we used a single-screw extruder for the dechlorination process because it also has a short residence time. Experiments on the dechlorination process were carried out by using a single-screw extruder to assess its dechlorination performance. Practical use of the single-screw was demonstrated by the operation of a commercial oil reclamation plant operated by Sapporo Plastic Recycle Co., Ltd. (SPR). Moreover, an investigation of cascade recycling was carried out in 2008 in which material recycle wastes were mixed with MWP and processed by chemical recycling (liquefaction). It was demonstrated that cascade recycling is an efficient recycling combination and contributes to local feedstock recycling. However, it was shown that MR wastes affect the quality of the reclamation oil when they make up more than 40% of the feed mix. If the quantity of MR wastes is kept below 40%, the reclamation oil is able to meet the quality standard. The SPR plant can be operated safely and in a stable manner.