Groundwater levels time series sensitivity to pluviometry and air temperature: a geostatistical approach to Sfax region,Tunisia

In this paper, the pattern of groundwater level fluctuations is investigated by statistical techniques for 24 monitoring wells located in an unconfined coastal aquifer in Sfax (Tunisia) for a time period from 1997 to 2006. Firstly, a geostatistical study is performed to characterize the temporal behaviors of data sets in terms of variograms and to make predictions about the value of the groundwater level at unsampled times. Secondly, multivariate statistical methods, i.e., principal component analysis (PCA) and cluster analysis (CA) of time series of groundwater levels are used to classify groundwater hydrographs regard to identical fluctuation pattern. Three groundwater groups (A, B, and C) were identified. In group “A,” water level decreases continuously throughout the study periods with rapid annual cyclic variation, whereas in group “B,” the water level contains much less high-frequency variation. The wells of group “C” represents a steady and gradual increase of groundwater levels caused by the aquifer artificial recharge. Furthermore, a cross-correlation analysis is used to investigate the aquifer response to local rainfall and temperature records. The result revealed that the temperature is more affecting the variation of the groundwater level of group A wells than the rainfall. However, the second and the third groups are less affected by rainfall or temperature.     

Mesoporous silica synthesized from natural local kaolin as an effective adsorbent for removing of Acid Red 337 and its application in the treatment of real industrial textile effluent

Environmental Science and Pollution Research - This paper presents a synthesis of mesoporous silica (MS) from natural clay as a silica source using Pluronic L35 (EO11PO16EO11) as a...     

Synthesis and Characterization of a Thin-Film Composite Nanofiltration Membrane Based on Polyamide-Cellulose Acetate: Application for Water Purification

Membrane separation has been widely used for various applications including microfiltration (MF), ultrafiltration (UF), and nanofiltration (NF) processes in the fields of biomedicine, food, and water purification. In this work, a facile synthesis of new polyamide thin-film composite nanofiltration membranes (NF-TFC) for water purification was described. The polyamide thin film was deposed over a synthetic cellulose acetate (CA) support by interfacial polymerization method. 1,3 cyclohexane bis (methylamine) (CHMA) and trimesoyl chloride (TMC) were used as monomers. The membranes were characterized using Scanning Electron Microscopy (SEM), Fourier Transform Infrared spectroscopy (FT-IR), water uptake, porosity, contact angle, water permeability and rejection towards specific salt and dye molecules. The effect of the variation of the CHMA concentration (0.2–2 wt.%) on the morphology, porosity, water permeation and rejection properties of the prepared membranes was studied. SEM results displayed the growth of the membrane thickness when the CHMA concentration increased from 0.2 to 2 wt.%. The strong adhesion between the cellulose acetate substrate and the polyamide layer explained by the formation of the polyamide film in the substrate surface and inside the pores. The water permeability varied from 36.02 to 17.09 L h^?1 m^?2 bar^?1. The salt rejection of Na₂SO₄ and NaCl increased from 9 to 68% and from 38.41% to 89.4%, respectively, when the CHMA concentration was changed from 0.2 to 2 wt.%. The prepared membranes were further applied successfully for the removal of malachite green and congo red. The results indicated that the maximum rejection reached 89% and 85% for malachite green and congo red, respectively.

     

Understanding the relationship between electric power consumption,technological transfer,financial development and environmental quality

Environmental Science and Pollution Research - This research paper attempts to investigate both the long-run and causality relationship among electric power consumption (EPC), technological...     

Presence of carbamazepine,naproxen, and ibuprofen in wastewater from northern Tunisia

We investigated the occurrence of three pharmaceutical residues in four wastewater treatment plants (WWTPs) from northern Tunisia. The selected compounds were carbamazepine, naproxen, and ibuprofen; they are among the most commonly prescribed and widely used pharmaceutical agents worldwide. Samples (200?mL) were pre-concentrated using the solid phase extraction (SPE) enrichment procedure and the analysis of the pharmaceuticals was performed with high-performance liquid chromatography (HPLC-UV). The overall procedure provided limits of detection (LOD) lower than 0.5 µg.L^?1and recoveries of 78–97%. For the carbamazepine compound, the mean concentrations were 60.58, 93.19, and 132 µg.L^?1 for the Bizerte, Jendouba, and Tunis WWTPs, respectively. This pharmaceutical was not detected in the Beja WWTPs. Naproxen and ibuprofens were not detected in the Jendouba WWTP but were found in the three other WWTPs with concentrations ranging from 2.94 to 36.17 µg.L^?1 and from 8.02 to 43.22 µg.L^?1, respectively. From the obtained data, it seems that these WWTPs are not able to eliminate this kind of micro-pollutants.     

Capacitated location of collection sites in an urban waste management system

Urban waste management is becoming an increasingly complex task, absorbing a huge amount of resources, and having a major environmental impact. The design of a waste management system consists in various activities, and one of these is related to the location of waste collection sites. In this paper, we propose an integer programming model that helps decision makers in choosing the sites where to locate the unsorted waste collection bins in a residential town, as well as the capacities of the bins to be located at each collection site. This model helps in assessing tactical decisions through constraints that force each collection area to be capacitated enough to fit the expected waste to be directed to that area, while taking into account Quality of Service constraints from the citizens' point of view. Moreover, we propose an effective constructive heuristic approach whose aim is to provide a good solution quality in an extremely reduced computational time. Computational results on data related to the city of Nardò, in the south of Italy, show that both exact and heuristic approaches provide consistently better solutions than that currently implemented, resulting in a lower number of activated collection sites, and a lower number of bins to be used.