A lysimeter experimental study and numerical characterisation of the leaching of incinerator bottom ash waste

Incinerator bottom ash (IBA) is a residual produced from incinerating municipal solid waste. In the past, IBA presented a big waste disposal problem; however, various recycling approaches have been adopted in recent years to mitigate this problem, as well as to provide a useful alternative to using primary aggregate resources. The use of IBA as an alternative to conventional aggregates in different civil engineering construction applications helps to conserve premium grade aggregate supplies; however, when IBA is in contact with water in the field, as a consequence of precipitation events or changes in water table, elements, such as salts and heavy metals, may be released to the soil and ground water. In this work, IBA waste was mixed with limestone aggregate to produce a blend with acceptable mechanical properties and minimum environmental risks for use as road foundation. The study focused on evaluating potential environmental impacts of some constituents, including sulphate, chloride, sodium, copper, zinc and lead in IBA blends using a lysimeter as a large scale leaching tool. Moreover, a specific scenario simulating field conditions was adopted in the lysimeter to assess the potential impact of changing conditions, such as IBA content in the blend, liquid to solid ratio (L/S) and pH value, on long-term release of heavy metals and salts. Then, numerical modelling was used to predict the release of the aforementioned constituents from IBA based on initial measurement of intrinsic material properties and the kinetic desorption process concept. Experimental results showed that zinc and lead were released in very low concentrations but sodium and sulphate were in high concentrations. The control limestone only blend also demonstrated low release concentrations of constituents in comparison to IBA blends, where constituent concentrations increased with increase in IBA content. Experimental results were compared with numerical results obtained using a non-equilibrium desorption model. Good agreement was found between the two sets of data.     

A general two-species competition model with time-varying rates

The classical mathematical model for the behaviour of the populations of two competing biological species has previously been generalized by the author, by assuming that the coefficients of intrinsic growth, self-inhibition and interaction were all functions of time and, for a certain class of the governing differential equations, the exact solutions were obtained: an example was given in which the coefficients were periodic functions. In the differential equations of this model (as well as in the autonomous Lotka-Volterra equations), each of the Malthusian growth-rates was assumed to be diminished by a linear function of the populations of the two species, without there being any rigorous justification for this assumption. We here generalize the differential equations by assuming for these diminution functions general nonlinear forms having time-varying coefficients. The exact solutions are given for four classes of the resulting strongly nonlinear non-autonomous differential equations. Various conclusions about the growth modes of the two populations and their asymptotic behaviour are drawn, both when specific and when arbitrary forms are assumed for the coefficient functions. Cases are examined in which the Competitive Exclusion Principle holds and others in which it does not.     

Managing Mediterranean soil resources under global change: expected trends and mitigation strategies

Regional Environmental Change - The soils of the Mediterranean Basin are the products of soil processes that have been governed by a unique convergence of highly differentiated natural and...     

Sequential extraction of Cs and Sr from Ain Oussera soils around Es-Salam research reactor facility

Four types of undisturbed soil in Ain Oussera region around the Es-Salam reactor facility, located in the south of Algiers, Algeria, at about 200 km, were artificially contaminated for one year with stable CsCl and SrCl₂ in order to simulate an accidental release of these elements. This study was performed using sequential extraction procedure based on Shultz method and containing six fractions. The selectivity of the extraction protocol was confirmed by analyzing some elements (Ca, C, Fe, Mn, Si and Al) designed as indicators of the targeted phases. The obtained results showed an acceptable reproducibility, in view of the coefficients of variation that were in most cases less than 15%. The results revealed a clear proportional correlation between the extracted Cs and Sr in fractions for each soil and some of soils physicochemical properties. Organic matter appears to play an important role in the soil retention, particularly for Cs where the extracted percentage exceeds to 30% in whole soils. In contrast, strontium expresses a remarkable affinity for the fraction bound to carbonates. The obtained data also indicate that the availability of Cs in the four soils is less important compared to Sr availability. This is illustrated by the higher value of extracted Sr in the easily extractible phase, including the water-soluble and the exchangeable fraction.     

Preparation and characterization of mesoporous γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> recovered from aluminum cans waste and its use in the dehydration of methanol to dimethyl ether

The present study includes synthesis of two γ-Al₂O₃ samples from waste aluminum cans using a simple precipitation method. Precipitation was carried out using two different precipitating agents (i.e. NaOH and NH₄OH). The two prepared alumina samples were characterized by means of X-ray diffraction (XRD) and N₂ adsorption–desorption techniques. Surface acidity of γ-Al₂O₃ samples was measured by adsorption of two different probe molecules (i.e. pyridine and dimethyl pyridine) followed by desorption measurements using thermogravimetry (TG) and differential scanning calorimetry (DSC) techniques. Catalytic activity of the two prepared alumina samples towards the dehydration of methanol (to dimethyl ether) was studied in a fixed bed reactor at 300 °C. For comparison reasons, commercial γ-Al₂O₃ sample was, also, tested for the same catalytic reaction under the same conditions. Results showed that the alumina sample prepared using NaOH as a precipitating agent exhibited a better catalytic activity and stability compared with that prepared using NH₄OH and showed a similar activity as the commercial γ-Al₂O₃ sample.     

Applicability of micellar electrokinetic chromatography to kinetic studies of photocatalytic oxidation of dibenzo-p-dioxin

Micellar electrokinetic chromatography (MEKC) using sodium dodecyl sulfate was tested for its ability to analyze mixtures containing three dioxin derivatives. Dioxin-containing samples, subjected to photocatalytic oxidation using TiO₂ and/or SnO₂ as the semiconductor catalyst were analyzed by MEKC to obtain the rate constant for each dioxin when it was degraded individually or in the presence of the other two dioxins. A significant degree of analyze competition was observed and the mixed catalyst offered important synergism.     

Capillary electrophoresis applied to kinetic studies of photocatalytic oxidation of substituted anilines

Cyclodextrin modified capillary electrophoresis (CMCE) and micellar electrokinetic chromatography (MEKC) were tested for their ability to analyze mixtures containing substituted anilines. CMCE separated analytes by their partitioning preference between the two substituted cyclodextrins while MEKC exploited the analyte partitioning between the micelles and the bulk aqueous phase. MEKC was selected to analyze samples that were subjected to photocatalytic oxidation using TiO₂ and/or SnO₂ as the semiconductor catalyst. The rate constant for each compound was determined when it was degraded individually or in the presence of other derivatives in the same family, indicating a significant degree of analyte competition and synergism offered by the mixed catalyst. The results demonstrated that CE, with its minimal sample preparation and requirement, is a valuable tool, particularly suitable for studying highly toxic pollutants, without generating a high volume of waste.     

Index methods for the assessment of surface water quality: the case study of Oued Fodda dam,in the Northwest of Algeria

Environment, Development and Sustainability - In this study, the assessment of surface water quality of Oued Fodda dam was carried out by using the physicochemical and organic data recorded during...     

Effectiveness of novel and traditional treatments on the performance of incinerator bottom ash waste

Management of natural aggregate resources has become one of the most important challenges in construction, especially for high demand applications such as roads. Incinerator bottom ash (IBA), which is produced from burning domestic waste, has been considered a useful solution to the shortage of natural resources. In this research, IBA was mixed with limestone to produce an acceptable blend for use as a road foundation layer. Novel and traditional additives were adopted to improve the mechanical properties of IBA blends. The study focused on the treatment effect of additives on the mechanical characteristics of IBA blends under monotonic and cyclic triaxial stresses. The investigation evaluated fundamental material properties, including resilient modulus, initial Young's modulus and Poisson's ratio. Two nonlinear empirical models were adopted to depict the experimental resilient modulus results of the IBA blends. An approach has been proposed to predict realistic and representative values of resilient modulus for the material. In addition, a new relationship has been established between Young's modulus, resilient modulus and Poisson's ratio. Triaxial test results revealed that additives are more efficient with the control limestone blend than with the IBA blends. Novel additives, such as enzyme I and silica fume, produced a noticeable improvement in IBA properties in comparison to traditional additives.