Subsurface nutrient modelling using finite element model under Boro rice cropping system

Boro rice, an emerging low-risk crop variety of rice, cultivated using residual or stored water after Kharif season. To enhance the quality and production of rice, potassium (K) and phosphorus (P) are the common constituents of agricultural fertilizers. However, excess application of fertilizers causes leaching of nutrients and contaminates the groundwater system. Therefore, assessment and optimization of fertilizer dose are needed for better management of fertilizers. Towards this, the present study determines the path, persistence, and mobility of K and P under the Boro rice cropping system. The experimental site consisted of four plots having Boro rice with four different fertilizer doses of nitrogen (N), P, K viz. 100%, 75%, 50%, and 25% of the recommended dose. Disturbed soil samples were analysed for K and P from pre-sown land to tillering stage at 0–5, 5–10, 10–15, 15–30, 30–45, and 45–60 cm depths. Simultaneously, K and available P were also simulated in the subsurface soil layers through the HYDRUS-1D model. The statistical comparisons were made with RMSER, E, and PBIAS between the modelled values and laboratory-measured values. Although, the results showed that all the treatments considered had agreeable simulations for both K and P, the K simulations were found to be better as compared to P simulations except for 25% where P simulations outperformed K. The simulated concentration at all doses was found most appropriate when measured for the subsurface layers (up to 45 cm), while showed an underestimation in the bottom layers (45–60 cm) of soil.

     

Assessment of hydrothermally modified fly ash for the treatment of methylene blue dye in the textile industry wastewater

Dyes and pigments are one of the major water pollutants and if not discharged properly cause ecological disturbance. Considering this, the current study investigates the application of thermal power plant by-product, i.e., fly ash for the elimination of a hazardous methylene blue dye from its synthetic aqueous solution. Experiments were conducted in batch mode to study the effect of pH, temperature, adsorbent dose and contact time. Highest dye removal (94.3%) was achieved at pH 10 using adsorbent dose of 10 g/L in 90 min of contact time at 40 °C. However, for cost-effective operation at neutral pH and room temperature (30 °C), it yields 89.3% dye removal having similar dose and contact time. Equilibrium isotherms for adsorption were analyzed by Langmuir and Freundlich, Temkin and Dubinin–Radushkevich isotherm equations. The results revealed that the best fit model of adsorption closely followed Langmuir adsorption. Based on adsorption isotherm models, thermodynamics parameters ΔG, ΔH and ΔS were calculated. The negative value of ΔG and ΔH revealed that adsorption process was exothermic, spontaneous and physical. The present work suggests that through simple process hydrothermally modified fly ash has the potential to be used as cost-effective and efficient adsorbent for the treatment of wastewater from textile industries.     

Improving the feasibility of aquaculture feed by using microalgae

Environmental Science and Pollution Research - The aquaculture industry is an efficient edible protein producer and grows faster than any other food sector. Therefore, it requires enormous amounts...     

Fluoride contamination in and around selected geothermal sites in Odisha,Eastern India: assessment of ionic relations,fluoride exposure and remediation

Environmental Science and Pollution Research - Fluoride contamination in groundwater is a major problem throughout the world as well as in India. High-fluoride content was reported in the hot...     

Triphenyl methyl phosphonium tosylate as an efficient phase transfer catalyst for ultrasound-assisted oxidative desulfurization of liquid fuel

Environmental Science and Pollution Research - The novel phosphonium-based ionic liquid (IL), triphenyl methyl phosphonium tosylate ([TPMP][Tos]), has been synthesized and applied as a phase...     

The Adaptive Capacity Wheel: a method to assess the inherent characteristics of institutions to enable the adaptive capacity of society

Climate change potentially brings continuous and unpredictable changes in weather patterns. Consequently, it calls for institutions that promote the adaptive capacity of society and allow society to modify its institutions at a rate commensurate with the rate of environmental change. Institutions, traditionally conservative and reactive, will now have to support social actors to proactively respond through planned processes and deliberate steps, but also through cherishing and encouraging spontaneous and autonomous change, as well as allowing for institutional redesign. This paper addresses the question: How can the inherent characteristics of institutions to stimulate the capacity of society to adapt to climate change from local through to national level be assessed? On the basis of a literature review and several brainstorm sessions, this paper presents six dimensions: Variety, learning capacity, room for autonomous change, leadership, availability of resources and fair governance. These dimensions and their 22 criteria form the Adaptive Capacity Wheel. This wheel can help academics and social actors to assess if institutions stimulate the adaptive capacity of society to respond to climate change; and to focus on whether and how institutions need to be redesigned. This paper also briefly demonstrates the application of this Adaptive Capacity Wheel to different institutions.     

Field performance evaluation during fog-dominated wintertime of a newly developed denuder-equipped PM1 sampler

This study presents the performance evaluation of a novel denuder-equipped PM₁ (particles having aerodynamic diameter less than 1 μm) sampler, tested during fog-dominated wintertime, in the city of Kanpur, India. One PM₁ sampler and one denuder-equipped PM₁ sampler were co-located to collect ambient PM₁ for 25 days. The mean PM₁ mass concentration measured on foggy days with the PM₁ sampler and the denuder-equipped PM₁ sampler was found to be 165.95 and 135.48 μg/m³, respectively. The mean PM₁ mass concentration measured on clear days with the PM₁ sampler and the denuder-equipped PM₁ sampler was observed to be 159.66 and 125.14 μg/m³, respectively. The mass concentration with denuder-fitted PM₁ sampler for both foggy and clear days was always found less than the PM₁ sampler. The same drift was observed in the concentrations of water-soluble ions and water-soluble organic carbon (WSOC). Moreover, it was observed that the use of denuder leads to a significant reduction in the PM positive artifact. The difference in the concentration of chemical species obtained by two samplers indicates that the PM₁ sampler without denuder had overestimated the concentrations of chemical species in a worst-case scenario by almost 40 %. Denuder-fitted PM₁ sampler can serve as a useful sampling tool in estimating the true values for nitrate, ammonium, potassium, sodium and WSOC present in the ambient PM.     

Growing stock and woody biomass assessment in Asola-Bhatti Wildlife Sanctuary,Delhi, India

Biomass is an important entity to understand the capacity of an ecosystem to sequester and accumulate carbon over time. The present study, done in collaboration with the Delhi Forest Department, focused on the estimation of growing stock and the woody biomass in the so-called lungs of Delhi—the Asola-Bhatti Wildlife Sanctuary in northern Aravalli hills. The satellite-derived vegetation strata were field-inventoried using stratified random sampling procedure. Growing stock was calculated for the individual sample plots using field data and species-specific volume equations. Biomass was estimated from the growing stock and the specific gravity of the wood. Among the four vegetation types, viz. Prosopis juliflora, Anogeissus pendula, forest plantation and the scrub, the P. juliflora was found to be the dominant vegetation in the area, covering 23.43 km² of the total area. The study revealed that P. juliflora forest with moderate density had the highest (10.7 m³/ha) while A. pendula forest with moderate density had the lowest (3.6 m³/ha) mean volume. The mean woody biomass was also found to be maximum in P. juliflora forest with moderate density (10.3 t/ha) and lowest in A. pendula forest with moderate density (3.48 t/ha). The total growing stock was estimated to be 20,772.95 m³ while total biomass worked out to be 19,366.83 t. A strong correlation was noticed between the normalized difference vegetation index (NDVI) and the growing stock (R ²?=?0.84)/biomass (R ²?=?0.88). The study demonstrated that growing stock and the biomass of the woody vegetation in Asola-Bhatti Wildlife Sanctuary could be estimated with high accuracy using optical remote sensing data.     

Reproductive toxicity of lead,cadmium, and phthalate exposure in men

Environmental toxicants viz lead or cadmium and phthalate esters (di(2-ethylhexyl) phthalate [DEHP], dibutyl phthalate [DBP], and diethyl phthalate [DEP]) widely found in different environmental strata are linked to deteriorating male reproductive health. The objective was to assess the relationships between the seminal lead, cadmium, and phthalate (DEHP, DBP, DEP) concentrations at environmental level and serum hormone levels and semen quality in non-occupationally exposed men and specify the effect of individual and combined exposure of toxicants on semen quality. A study of 60 male partners of couples attending the Andrology Laboratory of the Reproductive Biology Department, All India Institute of Medical Sciences (AIIMS), New Delhi, India for semen analysis to assess their inability to achieve a pregnancy was selected for the study. The results of univariate and stepwise multiple regression analysis in the unadjusted model showed a significant correlation between lead or cadmium and phthalates DEHP/DBP/DEP and sperm motility, sperm concentration, and DNA damage. After adjusting for potential confounders, an association with lead or DEHP was only observed. The present data shows that lead (Pb) or cadmium (Cd) or phthalates might independently contribute to decline in semen quality and induce DNA damage. Phthalates might influence reproductive hormone testosterone. These findings are significant in light of the fact that men are exposed to a volley of chemicals; however, due to the small sample size, our finding needs to be confirmed in a larger population.