Vertical migration of radionuclides in undisturbed grassland soils

Literature data on numerical values obtained for the parameters of the two most popular models for simulating the migration of radionuclides in undisturbed soils have been compiled and evaluated statistically. Due to restrictions on the applicability of compartmental models, the convection–dispersion equation and its parameter values should be preferred. For radiocaesium, recommended values are derived for its effective convection velocity and dispersion coefficient. Data deficiencies still exist for radionuclides other than caesium and for soils of non-temperate environments.     

Ventomod: a dynamic model for leaf to fruit transfer of radionuclides in processing tomato plants (Lycopersicon esculentum Mill.) following a direct contamination event

This paper presents results on the calibration and validation of a model (Ventomod) for leaf to fruit transfer of (134)Cs, (85)Sr and (65)Zn in processing tomato plants after leaf contamination. Several models (e.g. FARMLAND) that deal specifically with the transfer of radionuclides to fruits are adaptations of models that were developed for agricultural crops such as leafy green vegetables. "Ventomod" represents a dynamic evaluation model exclusively built for the short-term behaviour of radionuclide depositions. It forecasts the level of radionuclide contamination in ripe processing tomato fruits following an accidental radionuclide release into the atmosphere. A validation of the developed model by data sets from an independent experiment showed that the model successfully reproduced the observed radionuclide distribution and dynamics in tomato fruits. The level of uncertainty was within the normal range of similar assessment models. For a more general use of this model further testing with independent data sets from experiments obtained under different environmental conditions and data from other horticulturally important plant species would be desirable.     

Eco-labelling of wild-caught seafood products

Several eco-labels for wild-caught seafood have been developed during the last decade. This article describes and analyses the criteria applied by four different eco-labelling schemes for seafood products from capture fisheries, and discusses the criteria in terms of environmental impacts, based on the ISO 14040 standard for life cycle assessment.It is concluded that the most widespread eco-label, the Marine Stewardship Council (MSC), mainly addresses the fishing stage, in particular the overexploitation of marine resources. LCA studies confirm that the fishing stage represents the most significant environmental burden, but energy consumption and emissions of anti-fouling agents at the fishing or harvesting stage contribute with significant impacts that are not being addressed by international labelling initiatives for wild-caught seafood.LCA studies show that significant environmental impacts are related to the life cycle stages after landing. This includes fish processing, transport, cooling and packaging (especially for highly processed seafood products). Hence, another challenge would be to include criteria related to the post-landing consumption of energy, certain materials and chemicals, waste handling and wastewater emissions. Minimizing product losses throughout the product chain would also be an important area for future criteria in order to avoid fishing at high environmental costs only to produce something that is later wasted.The analysis shows that the Swedish KRAV is the only one that currently addresses a range of issues that include energy and chemicals in the whole life cycle of the products. International initiatives such as MSC cover fish products from many parts of the world emphasizing ‘overexploitation of fish resources’. It is recommended, however, that international initiatives such as MSC develop criteria related to energy use and chemicals – at least at the fishing stage. Over time, other life cycle stages could be addressed as well to the extent that this is manageable.     

Plant uptake of radionuclides in lysimeter experiments

The results of seven years lysimeter experiments to determine the uptake of 60Co, 137Cs and 226Ra into agricultural crops (endive, maize, wheat, mustard, sugarbeet, potato, Faba bean, rye grass) are described. The lysimeter consists of twelve monolithic soil profiles (four soil types and three replicates) and is located in Seibersdorf/Austria, a region with a pannonian climate (pronounced differences between hot and semi-arid summers and humid winter conditions, annual mean of precipitation: 517 mm, mean annual temperature: 9.8 degrees C). Besides soil-to-plant transfer factors (TF), fluxes were calculated taking into account biomass production and growth time. Total median values of TF's (dry matter basis) for the three radionuclides decreased from 226Ra (0.068 kg kg(-1)) to 137Cs (0.043 kg kg(-1)) and 60Co (0.018 kg kg(-1)); flux values exhibited the same ranking. The varying physical and chemical properties of the four experimental soils resulted in statistically significant differences in transfer factors or fluxes between the investigated soils for 137Cs and 226Ra, but not for 60Co. Differences in transfer between plant species and plant parts are distinct, with graminaceous species showing, on average, TF values 5.8 and 15 times lower than dicotyledonous species for 137Cs and 60Co, respectively. This pattern was not found for 226Ra. It can be concluded that 137Cs transfer is heavily influenced by soil characteristics, whilst the plant-specific factors are the main source of TF variability for 60Co. The variability of 226Ra transfer originates both from soil properties and plant species behaviour.     

Fossil bog soils (‘<Emphasis Type="Italic">dwog</Emphasis> horizons’) and their relation to Holocene coastal changes in the Jade Weser region,southern North Sea,Germany

After the deceleration of the postglacial marine transgression, the German North Sea coast was subject to deposition of a complex pattern of subtidal to terrestrial facies. This study aims at reconstructing these facies changes in the ‘Land Wursten’ region (Lower Saxony) by focussing on so-called dwog horizons (incipient soil horizons of the pre-engineered salt marshes). We explore their implications for relative sea-level reconstructions and their indication for early settlement activities. Archive drilling data (1960, provided by the ‘Landesamt für Bergbau, Energie und Geologie’) were analysed to create five high-resolution stratigraphic cross sections. Three new drilling records were subjected to sedimentological and microfaunal investigations and interpreted to verify and calibrate the archive data. Two dwog horizons were found and ¹⁴C-AMS dated. We found basal salt marsh deposits inundated by a high-energy event and covered by tidal flat sediments. The thick tidal flat unit is again overlain by salt marsh deposits indicating the transition from a shallow marine to a terrestrial environment where dwogs were developed and covered by episodic marine incursions. The ages of the dwogs (1128–969 cal BC; cal AD 1426–1467) do not correlate with known layers of adjacent settlement sites and are critically discussed. However, we show that they correlate with phases of stagnant regional relative sea level (RSL) and can be used as RSL indicators. The combined archive and modern data provide valuable information for the RSL reconstruction and palaeoenvironmental changes. However, further research is recommended to accomplish more detailed information about coastal response during the Holocene sea-level changes and implications for settlement dynamics.     

Worldwide cases of water pollution by emerging contaminants: a review

Environmental Chemistry Letters - Water contamination by emerging contaminants is increasing in the context of rising urbanization, industrialization, and agriculture production. Emerging...     

Radioactive contamination of tropical rainforest soils in Southern Costa Rica

Radionuclide content in soils from four locations in a tropical rainforest near Golfito in Southern Costa Rica was investigated. For comparison, two nearby locations in open grassland were also studied. From each site 5 soil cores down to a depth of 15 cm were taken. The median contamination with 137Cs was 584 Bq m-2 (reference date 1 January 1996) and the coefficient of variation (CV) was 50%. This contamination can be attributed to global fallout from atmospheric nuclear weapon tests between 1945 and 1980. The mean contamination is slightly lower than the value expected for the latitude (8 degrees 42': 700 Bq m-2), which may be explained by migration of radiocaesium to subsoil below 15 cm or by uptake into the living biomass. Out of the total variability of 50%, around 20% can be attributed to the sampling and measuring process uncertainties, thus leaving a 45% contribution of spatial variability. A significant difference between forest and meadow sites could be detected: the meadow sites showed lower radiocaesium soil inventories (median: 291 Bq m-2) than the forest sites (643 Bq m-2). This may be explained by the agricultural activities carried out on meadow sites which lead to an increased redistribution of caesium in the soil profile and therefore a larger fraction of the total 137Cs lying below 15 cm. Another reason for higher contamination levels under forest can be attributed to the high interception potential of dense tree canopies for dry deposition. Extrapolating the 137Cs concentration below the sampling horizon, i.e. accounting for the cut-off of the profiles by the sampling technique, results in an estimated mean of 710 Bq m-2 for the forest sites, which is very close to the expected figure. The mainly mineral part of the forest soil profiles was analysed for the 137Cs transport parameters, apparent convection velocity (v = 0.14 +/- 0.09 cm a-1) and apparent diffusion constant (D = 0.79 +/- 0.49 cm2 a-1). The maximum concentration can be found at 5.3 +/- 2.9 cm depth, the half-value depth being 7.4 +/- 1.3 cm. The mean 40K activity concentration was 175 Bq kg-1 dry matter (CV = 69%) and 226Ra and 228Ra concentrations of 9.90 Bq kg-1 (CV = 23%) and 7.93 Bq kg-1 (CV = 20%) have been found, respectively.     

Comparison of four measuring techniques to assess growth inhibition in standardized tests with seven freshwater algae and cyanobacteria

As representatives of primary producers, algae and cyanobacteria play an important role in assessing the risk of chemicals. However, the list of standard algal species commonly used for toxicity testing comprises very few species so that there is an urgent demand to identify further non-standard species which can be used for higher-tier risk assessment in general and the analysis of species sensitivity distributions in particular. In this study, four measuring techniques to assess growth inhibition were compared using five non-standard and two standard algal species and 3,5-dichlorophenol as reference substance. Regarding sensitivity and suitability, the measuring techniques were ranked in the following descending order: delayed fluorescence, prompt fluorescence, photometric absorbance, and microscopic cell count. All five non-standard species fulfilled the validity criteria if tested with delayed fluorescence.     

Evidence of nitrification and denitrification in high and low microbial abundance sponges

Aerobic and anaerobic microbial key processes were quantified and compared to microbial numbers and morphological structure in Mediterranean sponges. Direct counts on histological sections stained with DAPI showed that sponges with high microbial abundances (HMA sponges) have a denser morphological structure with a reduced aquiferous system compared to low microbial abundance (LMA) sponges. In Dysidea avara, the LMA sponge, rates of nitrification and denitrification were higher than in the HMA sponge Chondrosia reniformis, while anaerobic ammonium oxidation and sulfate reduction were below detection in both species. This study shows that LMA sponges may host physiologically similar microbes with comparable or even higher metabolic rates than HMA sponges, and that anaerobic processes such as denitrification can be found both in HMA and LMA sponges. A higher concentration of microorganisms in the mesohyl of HMA compared to LMA sponges may indicate a stronger retention of and, hence, a possible benefit from associated microbes.     

<Emphasis Type="Italic">Sympagohydra tuuli</Emphasis> (Cnidaria,Hydrozoa): first report from sea ice of the central Arctic Ocean and insights into histology,reproduction and locomotion

Various cnidarians have adapted their life style to interstitial habitats of marine sediments. Recently, for the first time a hydroid was reported from the interstitial brine channel system of Arctic fast ice. Due to its derived features, the new genus and species Sympagohydra tuuli was introduced. Here we describe findings of S. tuuli in sea ice at several sites within the central Arctic Ocean. In our view the results of this study do not allow assignment of Sympagohydra to any known family and we, therefore, suggest the introduction of a new family Sympagohydridae which is placed within the hydrozoan subclass Hydroidolina, order Anthomedusae, suborder Capitata. A first detailed histological analysis of S. tuuli is presented. In vivo analysis of locomotion and reproduction revealed a remarkable convergent evolution in S. tuuli and distant meiobenthic relatives. Shared traits are a flagellated epidermis enabling the animals to glide within small interstices by means of flagellar beating as well as an internalised embryogenesis. In S. tuuli gametogenesis occurs in the absence of gonophores inbetween gastro- and epidermis clearly separated from the epidermis. Budding was observed as the vegetative mode of reproduction. Documentation of feeding behaviour identified copepod nauplii and rotifers as prey items and demonstrates a high trophical position of the hydroids within the sympagic food web. Occurrence of reproducing individuals and pronounced tolerances towards changing temperatures and salinities indicate S. tuuli as a truly sympagic species. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.