提高电捕焦油器安全生产运行的措施

简要叙述了电捕焦油器开工以来存在的问题,对电捕捕焦油器不能安全稳定运行的原因进行了分析,并采取改进措施。实践证明,改进工艺技术合理,方法可行,电捕焦油器运行效果达到指标要求。     

Monitoring Biofilm Thickness Using A Non-Destructive, On-Line, Electrical Capacitance Technique

Abstact The present study was designed to evaluate indirect, non-invasive, on-line measurement of biofilm thickness using an electrical capacitance technique. Several assays were carried out and the results showed that, at a frequency of 1 kHz, electrical capacitance could be used to measure biofilm thickness indirectly (with a correlation coefficient of 0.9495). The reproducibility revealed by the assays was also highly satisfactory.However, in contrast to what was expected, there was an inverse relationship between electrical capacitance and biofilm thickness, i.e. electrical capacitance diminished with the increase in the biofilm thickness.The tests were also carried out at different frequencies (1 kHz, 10 kHz and 100 kHz)     

Near Real-Time Monitoring and Mapping of Specific Conductivity Levels Across Lake Texoma, USA

A submersible sonde equipped with a specific conductivity probe, linked with a global positioning satellite receiver was developed, deployed on a small boat, and used to map spatial and temporal variations in specific conductivity in a large reservoir. 7,695 sample points were recorded during 8 sampling trips. Specific conductivity ranged from 442,uS/cm to 3,378,uS/cm over the nine-month study. The data showed five statistically different zones in the reservoir: 2 different riverine zones, 2 different riverine transition zones, and a lacustrine zone (the main lake zone). These data were imported to a geographic information system where they were spatially interpolated to generate 8 maps showing specific conductivity levels across the entire surface of the lake. The highly dynamic nature of water quality, due to the widely differing nature of the rivers that flow into the reservoir and the effect of large inflows of fresh water during winter storms is easily captured and visualized using this approach.     

Development of monitoring technology for airborne particulate matter

Particulate matter suspended in the air has adverse effects onhuman health. Its level of concentration is an important parameter in evaluating the degree of hazard it poses to the atmosphere. Conventional methods used in measuring particulatematter are often filter-based, which indicates some disadvantagesbecause such a base requires labor and time. In this study, to achieve real-time measurements, a new electrical method was developed for measuring PM10 and PM2.5 concentrations. The basicprinciple is to electrically charge particles passing through thePM inlet using a corona charger and measure the currents createdby charged particles to obtain the number concentration of particulate matter. A new type inlet based on the particle cupimpactor configuration was designed and its performance was evaluated. A unipolar diffusion charger was developed and thecharger's efficiency was determined experimentally in terms ofPn, which represents the penetration through the charger,P, times the average charge number acquired by a particle,n, for different particle sizes. The correlation was constructed between the PM10 (or the PM2.5) mass concentrationsand the electrical currents due to particles, which were chargedby the diffusion charger.     

泰州市环境空气中挥发性有机物分布特征

于2018年4—9月对泰州市环境空气中挥发性有机物(VOCs)组分开展现场观测,结合观测数据分析该市大气中VOCs的时空分布特征。结果表明:观测期间泰州市环境空气中VOCs平均摩尔比为45.1 nmol/mol,其中含氧挥发性有机物占比为57.8%;受周边排放源和地理位置影响,下风向点位的VOCs测定值高于其他点位;VOCs月均最高值出现在6月,与臭氧月均最高值出现时间一致,7—9月气团出现老化,导致臭氧生成能力减弱;观测期间VOCs中甲苯/苯(T/B)比值范围为0.201 9～5.130 3,且大部分T/B比值2,说明溶剂、油气和液化石油气挥发等排放源对泰州市环境空气中VOCs的影响较为显著。     

Morphology and electrical conductivity of PACS

ＩｎｔｒｏｄｕｃｔｉｏｎＰｏｌｙａｌｕｍｉｎｉｕｍｃｈｌｏｒｉｄｅ(ＰＡＣ) ,ａｋｉｎｄｏｆｉｎｏｒｇａｎｉｃｐｏｌｙｍｅｒｆｌｏｃｃｕｌａｎｔ,ｉｓｗｉｄｅｌｙｕｓｅｄｉｎｗａｔｅｒａｎｄｗａｓｔｅｗａｔｅｒｔｒｅａｔｍｅｎｔ.ＩｎｏｒｄｅｒｔｏｉｎｃｒｅａｓｅｔｈｅｃｏａｇｕｌａｔｉｏｎｅｆｆｅｃｔｏｆＰＡＣａｎｄｉｍｐｒｏｖｅｔｈｅｑｕａｌｉｔｙｏｆＰＡＣｐｒｏｄｕｃｔ,ｉｔｉｓｎｅｃｅｓｓａｒｙｔｏｒａｉｓｅｔｈｅｄｅｇｒｅｅｏｆｐｏｌｙｍｅｒｉｚａｔｉｏｎｏｆＰＡＣ .Ｇｅｎｅｒａｌｌｙ ,ｔ…     

电凝聚过程中消除电极钝化方法的研究进展

电凝聚法是一种对环境二次污染很小的废水处理技术，具有广阔的应用前景。但是,因其电化学过程中可溶性铝或铁阳极的钝化现象而限制了其高效低能耗应用。从电凝聚电极过程的分析入手，讨论了电极钝化的本质原因及消除电极钝化的措施,并介绍了笔者采用自行研制的交变脉冲电凝聚专用电源,彻底消除电极钝化方面的研究进展。     

电热管焊接接头挤压裂纹的分析

针对电热管焊接接头挤压产生的裂纹 ,通过采用金相显微镜观察其金相组织并用直读光谱对原材料成分进行化学成分分析 ,排除了成分、焊接工艺规范等的影响。经过对挤压过程分析 ,发现应力集中点是产生裂纹的主要原因 ,并提出了改进的方法     

略论与电除尘器设计有关的几个问题

作者根据多年从事电除尘器工作的经验，提出了在设计、制造和调试中应充分考虑的诸如原始条件、设备参数选择、结构设计等影响电除尘器性能的各种因素，并从理论上进行分析和论证，以期通过讨论寻求最佳的设计方案和实践效果。     

森林植被影响径流形成机制研究进展

径流形成机制研究在水文学领域中具有十分重要的意义,且受到越来越广泛的重视。水文环境以及水文通量的空间异质性和时间变化性导致了水文过程的尺度依赖性和非线性特征,没有对水文过程较为清晰的认识,就不能将某一地区某一流域森林植被变化水文生态效应的研究结果简单地外推到其他地区和其他流域。开发基于物理过程分布式参数水文模型可以为认识森林植被变化的生态学后效和客观评价森林植被水文生态效益提供可行的工具。但是要实现这一目标,研究森林植被影响径流形成机制是问题的核心所在。另一方面,认识森林影响径流形成机制有助于研究水文学中的尺度问题。研究森林植被影响径流形成机制的主要方法包括水文测验、同位素示踪和动力水文学计算等,研究的空间尺度则为坡面与流域相接合。从已有的研究成果来看,森林植被影响径流形成机制可以概括为:①森林流域径流形成为变动源区产流机制;②森林流域径流形成主要受饱和地表径流、亚表层径流和地下径流的控制;③森林流域径流形成机制是相互作用和相互转化的;④优先流在森林流域径流形成中起到了至关重要的作用。