过氧化聚吡咯/聚乙烯吡咯烷酮修饰碳糊电极测定废水中苯酚

建立了过氧化聚吡咯(OPPy)和聚乙烯吡咯烷酮(PVP)修饰碳糊电极测定废水中苯酚的方法.优化了试验条件,苯酚的氧化峰电流在1.0×10-5 mol/L～1.0×10-3 mol/L之间线性关系良好,检出限为1.0×10-6 mol/L.该电极制作简单,选择性好,测定灵敏度高,精密度与准确度均符合要求.     

离聚物（MPET）对水中铬离子的吸附性能研究

研究了离聚物（MPET）粉末对Cr^3 的吸附性能，探讨了不同的吸附温度、时间、pH值和不同的初始浓度对吸附性能的影响，实验发现Cr^3 在较低温度下和pH为4时能被MPETO分末很好地吸附，最大饱和吸附量为11.80mg/g，实验表明MPET废纤维很可能发展成为一种经济的吸附重金属离子的材料。     

胡敏酸改性膨润土钝化污染土壤Pb&Cd及机理

通过盆栽试验,探讨了胡敏酸改性膨润土对重金属铅、镉污染土壤的钝化效果及机理。结果表明,铅、镉污染土壤中施加胡敏酸改性膨润土能显著降低小白菜中Pb、Cd的含量,在添加Cd(3 mg/kg)/Pb(250 mg/kg)污染土壤和Cd(1 0 mg/kg)/Pb(5 00 mg/kg)污染土壤上小白菜地上部分Pb含量分别比对照降低19.08%和47.91%,Cd含量分别比对照降低9.79%和14.89%。土壤本身对添加的重金属Pb/Cd有一定的耐受力和自我净化能力,在添加重金属后,添加的Pb/Cd元素大部分直接转化为较为稳定的碳酸盐结合态和铁锰氧化结合态。相关性分析显示小白菜的鲜重与小白菜Pb/Cd含量极显著负相关,进一步说明胡敏酸改性膨润土是通过提高小白菜的生物量,从而降低Pb/Cd在小白菜中的含量。     

改性粉煤灰处理黑化集团焦化含酚废水的研究

焦化废水是一种典型的含有难降解有机污染物的工业废水,除含有酚类化合物外,还含有多种芳香烃和杂环类有机污染物,成分复杂,水量大,对环境污染严重。因此,焦化废水处理技术越来越受到环保部门的重视。本文摸索了改性粉煤灰处理焦化含酚废水的试验工艺条件,确定了反应条件,反应时间和反应温度。     

改性沸石分离富集-火焰原子吸收光谱法测定长江水中镉

采用改性沸石分离富集-火焰原子吸收光谱法测定长江水中微量镉,优化了富集和洗脱条件,讨论了干扰离子的影响。方法在0μg~4.00μg范围内线性良好,检出限为0.214μg/L,长江水平行测定的RSD为1.8%,加标回收率为99.0%~104%。     

Measuring Plant Diversity in the Tall Threetip Sagebrush Steppe: Influence of Previous Grazing Management Practices

In July 2000, a 490-ha wildfire burned a portion of a long-term grazing study that had been established in 1924 at the US Sheep Experiment Station north of Dubois, Idaho, USA. Earlier vegetation measurements in this tall threetip sagebrush (Artemisia tripartita spp. tripartita) bunchgrass plant community documented significant changes in vegetation due to grazing and the timing of grazing by sheep. A study was initiated in May 2001 using 12 multiscale modified Whittaker plots to determine the consequences of previous grazing practices on postfire vegetation composition. Because there was only one wildfire and it did not burn all of the original plots, the treatments are not replicated in time or space. We reduce the potential effects of psuedoreplication by confining our discussion to the sample area only. There were a total of 84 species in the sampled areas with 69 in the spring-grazed area and 70 each in the fall- and ungrazed areas. Vegetation within plots was equally rich and even with similar numbers of abundant species. The spring-grazed plots, however, had half as much plant cover as the fall- and ungrazed plots and the spring-grazed plots had the largest proportion of plant cover composed of introduced (27%) and annual (34%) plants. The fall-grazed plots had the highest proportion of native perennial grasses (43%) and the lowest proportion of native annual forbs (1%). The ungrazed plots had the lowest proportion of introduced plants (4%) and the highest proportion of native perennial forbs (66%). The vegetation of spring-grazed plots is in a degraded condition for the environment and further degradation may continue, with or without continued grazing or some other disturbance. If ecosystem condition was based solely on plant diversity and only a count of species numbers was used to determine plant diversity, this research would have falsely concluded that grazing and timing of grazing did not impact the condition of the ecosystem.     

Adsorption of chlorpyrifos,penconazole and metalaxyl from aqueous solution by modified clays

Sorption of three pesticides (chlorpyrifos, metalaxyl and penconazole) has been measured on a commercial clay montmorillonite and on the same mineral modified with either of two cationic-surfactant micelles. Both micelle–clay complexes, commercial names Cloisite 20A and Cloisite 30B, showed a good capacity to sorb all three pesticides from water, whereas their sorption on the natural montmorillonite was not described by an isotherm. Modelling sorption on both micelle–clay complexes showed that the Freundlich sorption constant (K _F) was higher for chlorpyrifos on Cloisite 20A (K _F = 7.76) than on Cloisite 30B (K _F = 5.91), whereas the sorption of metalaxyl was stronger on Cloisite 30B (K _F = 1.07) than on Cloisite 20A (K _F = 0.57). Moreover the micelle–clay complex Cloisite 20A also showed a good affinity for penconazole, the maximum quantity adsorbed (q _m) of 6.33 mg g^?1 being 45% more than that on Cloisite 30B. Single-batch adsorption of each pesticide onto both micelle–clay complexes was studied using the Freundlich isotherm for chlorpyrifos and metalaxyl and the Langmuir isotherm for penconazole. The Cloisite 20A micelle–clay complex was predicted to require 23% less adsorbent to treat certain volumes of wastewater containing 30 mg L^?1 chlorpyrifos, 43% more to treat metalaxyl similarly and 57% less to treat penconazole compared with Cloisite 30B.     

Application of CFD on the sensitivity analyses of some parameters of the modified Hartmann tube

The aim of this work is to determine the influence of operating parameters such as the dispersion pressure, the ignition delay and height on the dust flammability. A Computational Fluid Dynamics (CFD) simulation, based on an Euler–Lagrange approach, was developed with Ansys Fluent™ and validated experimentally. Such analysis will facilitate the choice of the most conservative conditions for a flammability test. This paper is focused on a case study performed on wheat starch with the modified Hartmann tube. The dispersion process of the powder was studied with granulometric analyses performed in situ and high speed videos. Tests were performed with injections at gas pressure ranging from 3 to 6 bars and the evolution of the particle size distribution (PSD) was recorded at different ignition heights (5, 10 and 15 cm over the dispersion nozzle). The observations highlighted the presence of agglomeration/deagglomeration processes and dust segregation. Besides, a CFD simulation analysis was aimed at evaluating the impact of a set of parameters on the PSD and the local turbulence, which are closely linked to some flammability parameters. For this computational analysis, the CFD simulation was coupled with a collision treatment based on a Discrete Element Method (DEM) in order to consider the cohesive behavior of the combustible dust. Thus the results suggest performing the injection of the gases at approximately 5 bars for the flammability tests of wheat starch in order to obtain the finest PSD at a given ignition height. It is also shown that the finest PSD are obtained at 5 cm over the dispersion nozzle. However, the local instabilities and turbulence levels are so high during the first stages of the dispersion that the flame growth can be disturbed for short ignition delays. Moreover, the stabilization of the bulk of the dust cloud requires longer periods of time when the ignition sources are located at 15 cm. As a result, the recommended height to perform a flammability test is 10 cm in this case. Finally, this study proposes some tools that might improve the procedure of dust flammability testing.     

Mercury adsorption characteristics of HBr-modified fly ash in an entrained-flow reactor

In this study, the mercury adsorption characteristics of HBr-modified fly ash in an entrained-flow reactor were investigated through thermal decomposition methods. The results show that the mercury adsorption performance of the HBr-modified fly ash was enhanced significantly. The mercury species adsorbed by unmodified fly ash were HgCl₂, HgS and HgO. The mercury adsorbed by HBr-modified fly ash, in the entrained-flow reactor, existed in two forms, HgBr₂ and HgO, and the HBr was the dominant factor promoting oxidation of elemental mercury in the entrained-flow reactor. In the current study, the concentration of HgBr₂ and HgO in ash from the fine ash vessel was 4.6 times greater than for ash from the coarse ash vessel. The fine ash had better mercury adsorption performance than coarse ash, which is most likely due to the higher specific surface area and longer residence time.     

用改良彗星试验检测工业废水的DNA损伤作用

采用改良彗星试验直接检测了多种工业废水不所引起的Ｖ７９细胞ＤＮＡ损伤。结果表明,所测的种各工业废话水均含有ＤＮＡ损伤剂,能够诱发培养的Ｖ７９细胞ＤＮＡ链断裂,其中以制革厂不的ＤＮＡ损伤作用最强。本研究显示出改良彗星试验在综合评价各种废水遗传毒性方面具有广阔的应用前景。