Optimal Absorbent Evaluation for the CO2 Separating Process by Absorption Loading,Desorption Efficiency,Cost, and Environmental Tolerance

The CO₂ absorption capacities of potassium glycinate, potassium sarcosinate (choline, proline), mono-ethanolamine (MEA), and tri-ethanolamine were evaluated to find the optimal absorbent for separating CO₂ from gaseous products by a CO₂ purification process. The absorption loading, desorption efficiency, cost, and environmental tolerance were assessed to select the optimal absorbent. MEA was found to be the optimum absorbent for separating the CO₂ and H₂ mixture in gaseous product. The maximum absorption loading rate was 0.77 mol CO₂ per mol MEA at temperature of 20°C and absorbent concentration of 2.5 mol/L, whereas desorption efficiency was 90% by heating for 3 h at 130°C. MEA was found to be an optimal absorbent for the purification process of CO₂ during gaseous production.     

Evolution of environmental impact assessment as applied to watershed modification projects in Canada

This article reviews the application of environmental impact assessment (EIA) procedures and practices to three watershed modification projects situaled in western Canada. These ventures were justified for accelerating regional economic development, and cover the period during which public concerns for protecting the environment rapidly made their way into the national political agenda. An historical account and analysis of the situation, therefore, seems desirable in order to understand the development of EIA processes, practices, and methodologies since the start of construction of the first project in 1961. This study concludes that there has been good progress in predicting and evaluating environmental and related social impacts of watershed modification proposals. However, a number of obstacles need to be overcome before EIA can firmly establish itself as an effective planning tool. These difficulties include jurisdictional confusions and conflicts, division of authority and responsibility in designing and implementing appropriate mitigative and monitoring measures, lack of tested EIA methodologies, and limited availability of qualified human resources. A number of conclusions and suggestions are offered so that future watershed modification proposals may be planned and implemented in a more environmentally sustainable fashion. These include: (1) EIA processes must be completed before irrevocable decisions are made. (2) Any major intrusion into a watershed is likely to impact on some major components of the ecosystem(s). (3) Mitigation costs must form part of the benefit-cost analysis of any project proposal. (4) Interjurisdictional cooperation is imperative where watersheds cross political boundaries. (5) The EIA process is a public process, hence public concerns must be dealt with fairly. (6) The role of science in the EIA process must be at arms length from project proponents and regulators, and allowed to function in the interest of the protection of the environment and public health and safety. The views expressed here are the authors’ own and do not necessarily reflect those of FEARO and/or other government agencies and officials involved in the review of these projects.     

论环境产业

本文在可持续发展视角下,把环境的保护、修复、维护的生产活动及与之直接相关的服务活动称为环境产韭,包括发挥减少、避免污染环境作用的资源再利用鼗和发挥治理污染物与修复、改善环境作用的环境维护业.通过探讨环境产业的内涵、发展历程、运行机制和在产业体系中的位置与作用,指出环境产业是在法规保障下政府强行推动产生和发展起来的,是产业体系中不可缺少的重要组成部分;考虑自然环境对社会行为的影响,改进政府行为构建适台环境产业与传统产业协调发展的经济体制是加快发展环境产业的关键.     

爆炸事故过程分析中不确定性问题处理方法

针对事故过程分析中的不确定性问题,指出了不确定问题在危险分析中的重要性及处理该问题的复杂性和难点,列出了几种基于非线性数学方法处理不确定问题的基本方法,如微分法、MonteCarlo模拟、Fourier方法、响应表面法等,并对之进行了比较.建议在处理事故过程的不确定性时采用Monte Carlo模拟.     

焦化废水处理过程中固相物质的形成及处置方法评价

焦化废水处理过程中产生的焦油、污泥和结晶杂盐等固相物质,既有资源属性,又有污染特性,但目前缺乏基于能源、经济及环境影响方面的评估.本研究阐述了3类固相物质的形成机制,建立了质量当量计算及处置方法评价模型.以宝武集团韶关钢铁股份有限公司焦化厂（二期）焦化废水处理工程的A/O/H/O（厌氧/好氧/水解/好氧）流化床工艺作为考察对象,利用工程运行参数和水质统计数据进行固相物质的产量推算,结果发现,焦油、物化污泥、生物污泥（含水率为80%）和工业杂盐的产率分别为0.186、5.80、4.24和1.97 kg·m^-3.通过处置方法评价模型明确了焦油焚烧、污泥热解、结晶杂盐分盐提纯后工业应用是最佳处置方案,在60 m³·h^-1废水处理规模的固相物质处置过程中,每年约产生1177 MWh的能源,获得135.0万元的经济效益,排放627.0 t CO₂,表明能源回收、经济效益和环境影响的协同存在.     

O3-BAC深度处理工艺中细菌群落时空分布及动态变化规律

为弄清饮用水O₃-BAC深度处理工艺过程中细菌群落的时空分布和动态变化规律,本研究以我国南方某O₃-BAC深度处理工艺水厂为研究对象,采用NovaSeq6000高通量测序技术对夏季和冬季各工艺单元出水及滤砂和活性炭生物膜等细菌群落进行解析.结果表明,出厂水pH、浊度、COD_Mn、菌落总数等指标均满足《生活饮用水卫生标准》（GB5749-2006）的要求.夏季细菌群落多样性明显高于冬季,活性炭生物膜的细菌群落多样性高于滤砂生物膜;混凝沉淀、臭氧化和消毒是影响细菌群落多样性的主要工艺单元.水样和生物膜样品绝对优势菌门均为变形菌门（Proteobacteria）,且主要菌门组成大体相同,但细菌群落门水平相对丰度存在一定的时空差异,属水平上差异则更为明显.此外,检测到的条件致病菌属主要包括芽孢杆菌属（Bacillus）、不动杆菌属（Acinetobacter）、假单胞菌属（Pseudomonas）和分支杆菌属（Mycobacterium）,且其所占核心微生物OTUs数目不受季节性影响.水温和生物可降解溶解性有机碳（BDOC）是显著影响细菌群落分布的主要水质参数.以上研究结果表明,O₃-BAC深度处理工艺过程中细菌群落具有时空变化特性,并可为饮用水微生物安全保障提供支撑.     

成都市及周边地区严重臭氧污染过程成因分析

结合天气形势,地面观测资料和WRF-CMAQ模式,分析了2017年7月8~15日成都市一次罕见持续O₃污染过程的特征及成因,量化了各个物理化学过程对此次污染过程的相对贡献,并通过敏感性实验分析了四川盆地内O₃及其前体物的区域传输和本地光化学反应对此次污染过程的影响.结果表明,此次O₃持续污染过程主要是因为四川盆地内盛行偏东风,导致盆地东部城市群的O₃及其前体物经区域输送到成都及周边地区,加之成都市出现小风、气温升高等气象条件进而形成,属于典型的传输性爆发污染.持续污染形成的主要物理化学机制体现为日间气相化学过程贡献为稳定的正值,加之输送过程贡献出现爆发式升高,进而导致近地面O₃小时净增量迅速上升且高达50μg/（m³·h）,随之O₃浓度迅速响应,产生爆发式增长.此外,敏感性实验结果显示此次成都市O₃持续污染的形成受区域输送影响较受本地光化学反应影响更为明显.O₃污染爆发前上游地区高浓度O₃及其前体物沿流场输送并在成都及周边地区不断积累,导致日间O₃浓度不断升高.     

漓江流域δD和δ18O对蒸发的指示作用

以漓江流域为例查明不同水体之间氢氧稳定同位素组成特征,并探讨氢氧稳定同位素对漓江流域的蒸发过程指示作用.结果表明：流域内不同水体之间,氢氧稳定同位素表现出不同的组成特征,地表水和地下水,在丰水期δD值和δ¹⁸O值要比枯水期更容易富集,地下水的δD值和δ¹⁸O值分布范围较地表水小;随着水温的升高,δ¹⁸O的变化趋势比d-excess明显.从漓江上游到下游高程逐渐下降,河水线的斜率和截距也在逐渐减小,其中漓江下游河水线的斜率和截距要低于当地大气降水线,表明下游受到蒸发作用较强烈;地下河水线、地表河水线在一定程度上偏离当地大气降水线,但偏离程度较小,表明三者之间有很好的水力联系.受温度和湿度的共同影响,漓江干流丰水期河水的蒸发量占最初水体总量的0.7%~9.1%,枯水期河水的蒸发量占最初水体总量的2.6%~9.7%,丰水期的蒸发比例低于枯水期,从上游到下游蒸发比例在逐渐上升.研究区蒸发量估算值为959.40mm,与多年实测值少43.11mm,相对误差4.70%.氢氧稳定同位素对研究区降水、地表水、地下水之间的转换规律具有重要的实际意义,在今后的漓江流域水文研究中有着更加广阔的空间.     

近三十年中国非点源污染研究现状与未来发展方向探讨

非点源污染是我国面临的重要环境问题之一,其影响范围广,污染不易控制,因此受到研究者和管理者越来越多的关注.中国非点源污染研究呈起步晚、速度快、范围广的发展特点,近十年来相关论文发表已达到一定数量,但是现有研究多是针对非点源污染体系中某些方面进行探究,缺少从全国尺度和长时间序列角度对我国非点源污染研究现状的梳理和总结.本文从全球主要文献库中检索了1988—2018年我国非点源污染的相关文章,挑选出1354篇文章进行统计分析,对于年发文数量、研究区所属省份、研究区所属流域、研究对象和研究方法分别进行统计展示.对我国近三十年非点源污染研究现状与存在问题进行总结,其中农业非点源污染需要继续深入探究其机理,城市非点源污染研究深度不足,研究地区有较大差异,研究方法存在复杂性与实用性的矛盾.未来中国非点源污染研究仍会以农业和农村非点源为主要研究对象;城市非点源将得到进一步发展;非点源污染物的防治与利用将成为重要的研究目标和研究方向;在国家实施的长江大保护战略及黄河生态保护高质量发展战略中,非点源污染也是关键研究问题;全球变化对非点源污染的影响也将是未来研究不可忽视的问题.本文对近三十年中国非点源污染研究规律进行了总结,探究发展变化原因,并提出未来发展方向,为污染源控制以及污染管理提供科学建议和决策支持.     

Revealing the changes of bacterial community from water source to consumers tap: A full-scale investigation in eastern city of China

This study profiled the bacterial community variations of water from four water treatment systems, including coagulation, sedimentation, sand filtration, ozonation-biological activated carbon filtration (O₃-BAC), disinfection, and the tap water after the distribution process in eastern China. The results showed that different water treatment processes affected the bacterial community structure in different ways. The traditional treatment processes, including coagulation, sedimentation and sand filtration, reduced the total bacterial count, while they had little effect on the bacterial community structure in the treated water (before disinfection). Compared to the traditional treatment process, O₃-BAC reduced the relative abundance of Sphingomonas in the finished water. In addition, ozonation may play a role in reducing the relative abundance of Mycobacterium. NaClO and ClO₂ had different effects on the bacterial community in the finished water. The relative abundance of some bacteria (e.g. Flavobacterium, Phreatobacter and Porphyrobacter) increased in the finished water after ClO₂ disinfection. The relative abundance of Mycobacterium and Legionella, which have been widely reported as waterborne opportunistic pathogens, increased after NaClO disinfection. In addition, some microorganisms proliferated and grew in the distribution system, which could lead to turbidity increases in the tap water. Compared to those in the finished water, the relative abundance of Sphingomonas, Hyphomicrobium, Phreatobacter, Rheinheimera, Pseudomonas and Acinetobacter increased in the tap water disinfected with NaClO, while the relative abundance of Mycobacterium increased in the tap water disinfected with ClO₂. Overall, this study provided the detailed variation in the bacterial community in the drinking water system.