一种新型铋基光催化剂的合成及其可见光催化性能

采用水热法合成铋基光催化剂Bi4VO8Br,通过X-射线粉末衍射、扫描电镜等手段对其进行表征.选择甲基橙为目标降解物来评价不同条件下合成的Bi4VO8Br在可见光下的光催化活性,发现pH 3、反应时间15 h、反应温度160℃为材料水热合成的最佳条件.考察了Bi4VO8Br在可见光及紫外光下对几种农药和增塑剂的光催化降解性能,显示了Bi4VO8Br对不易光解的含苯环有机物的可见光高活性.五氯酚的光催化过程影响因素优化结果表明,可见光和紫外光分别照射120 min和20 min,其降解率分别达到97％和99％,Bi4VO8Br表面上活性基团的捕获即空穴的氧化作用是主要反应原理.     

氟化铵制备氟化钙最优条件研究

试验采用氟化铵与石灰石粉、石灰乳反应制取氟化钙,研究了反应温度、物料浓度、物料过量系数等各主要参数变化对氟化钙结晶、过滤速度、氟收率及其含量的影响,摸索出最优反应条件。     

Review of the progress in preparing nano Ti02： An important environmental engineering material

TiO2 nanomaterial is promising with its high potential and outstanding performance in photocatalytic environmental applications, such as CO2 conversion, water treatment, and air quality control. For many of these applications, the particle size, crystal structure and phase, porosity, and surface area influence the activity of TiO2 dramatically. TiO2 nanomaterials with special structures and morphologies, such as nanospheres, nanowires, nanotubes, nanorods, and nanoflowers are thus synthesized due to their desired characteristics. With an emphasis on the different morphologies of TiO2 and the influence factors in the synthesis, this review summarizes fourteen TiO2 preparation methods, such as the sol-gel method, solvothermal method, and reverse micelle method. The TiO2 formation mechanisms, the advantages and disadvantages of the preparation methods, and the photocatalytic environmental application examples are proposed as well.     

QuEChERS: a sample preparation for extraction of carbaryl from rat feces

Carbamate compounds are an important group of cholinesterase inhibitors. There is a need for creating awareness regarding the risks of the inadequate carbamate use in the residential areas due to potential adverse human effects. Carbaryl is a commonly used pesticide worldwide. A simple, fast, and high-throughput method was developed employing liquid chromatography with fluorescence detector to determine carbaryl residues in rat feces. The extraction was performed by using a rapid, easy, cheap, effective, reliable, and safe (QuEChERS) method, using acetonitrile as the extracting solvent. The parameters for the performance of the extraction method were optimized, such as ratio of mass of sample per volume of extraction solvent, QuEChERS content, and cleanup columns. Linear response was obtained for all calibration curves (solvent and matrix-matched) over the established concentration range (5–500 μg/L) with a correlation coefficients higher than 0.999. The achieved recovery was 97.9% with relative standard deviation values of 1.1% (n = 4) at 167 μg/kg fortified concentration level and the limits of detection and quantification were 27.7 and 92.3 µg/kg, respectively.     

地方政府地震风险预防与应急准备:实践、挑战及对策——基于广东河源市的分析

地震是广东河源市常见的自然灾害,频发的地震和作为城市重大风险源的新丰江水库可能诱发地震的双重影响对河源市地震应急预防准备工作提出严峻挑战,提升河源市政府和相关部门的地震应急能力尤为重要。根据对河源市地震应急预防准备工作现状的实地调研访谈、问卷调查和分析,阐述了河源市在地震应急预防准备工作进行的实践探索、待改善的方面,在借鉴国内外经验基础上,提出了加强和改进河源市地震预防与应急准备工作的对策建议。     

微波诱导热解法制备落叶吸附剂及其工艺优化

采用微波诱导热解法制备低成本落叶吸附剂,以实现落叶的资源化利用.以碘吸附值为响应值,采用响应面分析法研究了微波诱导热解法制备落叶吸附剂的工艺条件.结果表明,热解时间与微波功率之间存在交互作用,当热解功率增加时,可适当缩短热解时间.落叶吸附剂的最佳制备工艺条件为:热解时间4.04 min,微波功率488.72W,氯化锌质量分数27％.落叶吸附剂以微孔吸附为主,BJH孔径分布较窄,孔容最高峰对应的孔径在1.9 nm左右,Langmuir比表面积为769.61 m2/g.     

Survey-based analysis of evacuation preparation behaviors in a chemical leakage accident: A case study

Public evacuation preparation exerts an important impact on overall evacuation efficiency during regional evacuations. Early warnings often delay the occurrence of chemical accidents. Studying the characteristics of public evacuation preparation in such accidents will help develop better evacuation strategies considering the actual public response. In this work, the characteristics and factors influencing public evacuation preparation behaviors were analyzed by examining an evacuation case in China. The results indicated that the probability distribution of public's evacuation preparation time during a regional evacuation conforms to a Weibull distribution regardless of whether or not evacuation warnings were received. An estimation model of the traffic flow loading rate in a regional evacuation was then proposed on the basis of this finding. The results of this research can provide a reliable reference for evacuation modeling or logistics optimization for future incidents.     

A method to estimate the impact of clear-cutting on nutrient concentrations in boreal headwater streams

Large-scale forestry operations, like clear-cutting, may impair surface water quality if not done with environmental considerations in mind. Catchment and country level estimates of nutrient loads from forestry are generally based on specific export values, i.e., changes in annual exports due to the implemented forestry operations expressed in kg ha⁻¹. We introduce here a specific concentration approach as a method to estimate the impact of clear-cutting on nutrient concentrations and export in headwater streams. This new method is potentially a more dynamic and flexible tool to estimate nutrient loads caused by forestry, because variation in annual runoff can be taken into account in load assessments. We combined water quality data from eight boreal headwater catchment pairs located in Finland and Sweden, where the effect of clear-cutting on stream water quality has been studied experimentally. Statistically significant specific concentration values could be produced for total nitrogen, nitrate, ammonium, and phosphate. The significant increases in the concentrations of these nutrients occurred between 2 and 6 years after clear-cutting. Significant specific concentration values could not be produced for total phosphorus and total organic carbon with the whole dataset, although in some single studies significant increases in their concentrations after clear-cutting were observed. The presented method enables taking into account variation in runoff, temporal dynamics of effects, and the proportional size of the treated area in load calculations. The number of existing studies considering large site-specific variation in responses to clear-cutting is small, and therefore further empirical studies are needed to improve predictive capabilities of the specific concentration values.     

GO-TiO2改性中空纤维膜的制备条件及抗污染性能研究

以氧化石墨烯(GO)与纳米二氧化钛(TiO_2)为改性剂,采用界面聚合法与抽滤吸附结合,对聚偏氟乙烯中空纤维超滤膜(简称原膜)进行表面改性,得到新型纳米改性膜(简称GO-TiO_2改性膜).研究改性膜的制备工艺条件及其对腐殖酸(HA)的吸附截留性能与抗污染特性.结果表明:(1)最佳制备工艺条件为:钛酸丁酯2 m L、GO 1 mg、间苯二胺1%(质量分数)、间苯二胺浸泡时间8 min、均苯三甲酰氯0.2%(质量分数)、均苯三甲酰氯浸泡时间10 min;(2)亲水性提高显著,亲水性表面为GO-聚酰胺-TiO_2复合结构,改性膜接触角由80.6°±1.8°下降到38.6°±1.2°;(3)抗污染性能提高明显.改性膜通量总衰减率由改性前的51.2%下降到35.6%,过滤周期约为原膜的2.5倍;反冲洗后膜通量恢复率由69%提高到96%.     

离子交换膜的制备及发展趋势研究

总结当前离子交换膜制备技术的发展状况.从膜的分类及膜性能出发,讨论均相膜及异相膜的差异和今后各自的发展前景,并就提升膜单方面性能(如:选择透过性、离子交换容量、膜电阻、抗氧化性等)的方式进行归纳总结.离子交换膜的改进制备大多从结构上入手,提出今后膜制备的主要研究方向为:深化均相膜制备技术、结合国内成熟的离子交换树脂制备工艺改进异相膜的制备技术.