Optimization of the recovery of plastics for recycling by density media separation cyclones

Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material.     

链状高分子金属配合物催化氧化苯乙烯

利用链状Salen型高分子希夫碱金属配合物PLSBM(M:CoⅡ,MnⅡ,ZnⅡ,CuⅡ)作为催化剂,催化分子氧氧化苯乙烯.结果表明,在不添加任何助剂和共还原剂的条件下,氧化产物以苯甲醛(Ⅰ)和环氧苯乙烷(Ⅱ)为主,PLSBCuⅡ具有最佳的催化活性和产物选择性.考察了影响氧化反应的因素,发现在反应温度为90℃、反应时间为9h和催化剂与苯乙烯用量比为1mg∶2mL时,苯乙烯具有最优的转化率(61％)和产物选择性(Ⅰ:57％,Ⅱ:36％).     

苯乙烯装置的清洁生产方案及实施效果

分析了苯乙烯装置的主要污染源及装置能耗高、物耗高和污染重的重点部位,介绍了主要的清洁生产方案,并对方案实施后产生的效果进行了分析。     

液体吸收-活性炭吸附净化苯乙烯废气

介绍了液体吸收-活性炭吸附净化苯乙烯废气的原理.当吸收液中石油类物质占总体积的40％时吸收率最佳,小试液体吸收段对苯乙烯废气的吸收率在74％-97.6％之间,在工业净化装置中使用该吸收液,对苯乙烯废气的吸收率在60％-97.4％之间.活性炭对苯乙烯的吸附率为自重的30％.工业净化装置中,两种方法并用苯乙烯废气的净化效率在94.8％以上.该方法关键是寻找高效的吸收液和设计实用的净化装置.     

苯乙烯废水活性炭吸附装置的评价及改进研究

对抚顺石化公司化工塑料厂苯乙烯废水活性炭吸附装置的预处理设施、活性炭吸附及再生性能进行了评价，分析了出水水质超标的主要原因，用混凝沉淀－砂滤流程改进了原处理工艺，使出水水质得到了显著改善。     

大气中苯乙烯的气相色谱法测定

采用活性炭管吸附大气中基苯乙烯，以二硫化碳洗脱，以溴水加成后，用气相色谱电子捕获器测定苯乙烯的二溴加成物。本方法适合于检测多种污染物共存的大气中痕量苯乙烯。其线性范围为０．０１５－０．７４ｎｇ，最低检出浓度为０．００１ｍｇ／ｍ＾３；重现性实验的变异系数为２．３％：当活性炭管吸附苯乙烯在２．９μｇ时，回收率为９０％，吸附苯乙烯０．２９μｇ时，回收率为７２％。     

Leaching of styrene and other aromatic compounds in drinking water from PS bottles

Bottled water may not be safer, or healthier, than tap water. The present studies have proved that styrene and some other aromatic compounds leach continuously from polystyrene （PS） bottles used locally for packaging. Water sapmles in contact with PS were extracted by a preconcentration technique called as ＂purge and trap＂ and analysed by gas chromatograph-mass spectrometer （GC/MS）. Eleven aromatic compounds were identified in these studies. Maximum concentration of styrene in PS bottles was 29.5 μg/L. Apart from styrene, ethyl benzene, toluene and benzene were also quantified but their concentrations were much less than WHO guide line values. All other compounds were in traces. Quality of plastic and storage time were the major factor in leaching of styrene. Concentration of styrene was increased to 69.53 μg/L after one-year storage. In Styrofoam and PS cups studies, hot water was found to be contaminated with styrene and other aromatic compounds. It was observed that temperature played a major role in the leaching of styrene monomer from Styrofoam cups. Paper cups were found to be safe for hot drinks.     

职业接触苯乙烯工人静脉血中蛋白质环氧苯乙烯加合物的分析测定

静脉血中蛋白质－环氧苯乙烯（ＳＯ）加合物的分析测定是将蛋白质中半胱氨酸残留经分解后，用Ｒａｎｅｙ Ｎｉ催化反应生成两种加合物：α－苯己醇，β－苯已醇，再用五氟苯氯衍生，ＧＣ／ＭＳ测定，用同样的方法测ＳＤ大鼠血的蛋白质加合物，结果表明动物血中蛋白质加的与实验的苯乙烯或ＳＯ剂量有较好的相关性；而且ＳＯ与半胱氨酸的反应α位强于β位，在人群实验中，对一个石棉厂职业接触苯乙烯工人静脉血中的蛋白质加合物进行测     

生物膜填料塔净化低浓度苯乙烯废气的实验研究

研究了进口气体中苯乙烯浓度、气体流量和液体流量等3个因素对生物膜填料塔净化苯乙烯废气的影响。研究结果表明，当进口气体中苯乙烯浓度为1000mg／m^3以下、气体流量为200L／h、循环液流量为10L／h的操作条件下，废气中苯乙烯的去除率可达90％以上。     

一起苯乙烯槽罐车泄漏的应急监测案例

2007年10月28日凌晨，镇江市环境监测中心站于3：40接到市环保局应急指挥中心关于338省道200km处，发生一起苯乙烯槽罐车泄露的紧急交通事故通知，于是立即启动应急监测响应程序，监测站应急监测小组于4：20到达事故现场，并立即用快速检测装备进行现场定性、定量跟踪监测，及时向现场应急指挥部提供了第一线的监测数据，为污染事故的及时控制与安全处置提供了决策依据。经13个多小时的共同处置，罐内苯乙烯得到安全驳载，肇事车辆被拖离现场，交通也顺利恢复。