天津港运输船舶大气污染物排放清单

运输船舶产生的大气污染物对港口大气环境有重要影响,但我国对这部分内容的研究却相当薄弱.本文首先对天津港运输船舶的总体情况进行调研,根据其排放控制技术水平合理选择了排放因子;而后采用基于燃料消耗的方法,对2006年天津港运输船舶排放的NOx、HC、CO和PM_(10)进行了计算,建立了天津港运输船舶大气污染物的排放清单;最后对2010年和2020年天津港的运输船舶大气污染排放情况进行了预测.该清单的估算和预测可以为加强排放控制和制定相关法规提供重要依据.     

Exergetic Sustainability Indicators as a Tool in Commercial Aircraft: A Case Study for a Turbofan Engine

This paper focuses on the exergetic sustainability indicators of a medium-range commercial aircraft engine for constant reference environment and ground running conditions. First, a detailed exergy analysis of turbofan engine have been performed based on engine test cell parameters. Starting from the sustainability considerations and the second law of the thermodynamics, the paper presents six exergy-based sustainability indicators. The indicators of the turbofan engine developed here in conjunction with exergetic analysis and sustainable development are exergy efficiency, waste exergy ratio, exergy destruction factor, recoverable exergy rate, environmental effect factor, and exergetic sustainability index. The investigated sustainable indicators have been calculated by using exergy analysis outputs for aircraft ground running condition. Results from this study show that values of exergy efficiency, waste exergy ratio, exergy destruction factor, recoverable exergy rate, environmental effect factor, and exergetic sustainability index of investigated turbofan engine are found to be 0.315, 0.685, 0.408, 0, 2.174, and 0.460, respectively. These parameters are expected to quantify how the turbofan engine and aircraft become more environmentally benign and sustainable.     

Comparison of CNT-PVA membrane and commercial polymeric membranes in treatment of emulsified oily wastewater

CNT-PVA membrane was fabricated and compared with polymeric membranes. The separation performance was evaluated by homemade and cutting fluid emulsions. The three membranes show similar oil retention rates. CNT-PVA membranes have higher permeation fluxes compared with polymeric membranes. CNT-PVA membrane shows higher fouling resistance. Membrane separation is an attractive technique for removal of emulsified oily wastewater. However, polymeric membranes which dominate the current market usually suffer from severe membrane fouling. Therefore, membranes with high fouling resistance are imperative to treat emulsified oily wastewater. In this study, carbon nanotube-polyvinyl alcohol (CNT-PVA) membrane was fabricated. And its separation performance for emulsified oily wastewater was compared with two commercial polymeric membranes (PVDF membrane and PES membrane) by filtration of two homemade emulsions and one cutting fluid emulsion. The results show that these membranes have similar oil retention efficiencies for the three emulsions. Whereas, the permeation flux of CNT-PVA membrane is 1.60 to 3.09 times of PVDF membrane and 1.41 to 11.4 times of PES membrane, respectively. Moreover, after five consecutive operation circles of filtration process and back flush, CNT-PVA membrane can recover 62.3% to 72.9% of its initial pure water flux. However, the pure water flux recovery rates are only 24.1% to 35.3% for PVDF membrane and 6.0% to 26.3% for PES membrane, respectively. Therefore, CNT-PVA membrane are more resistant to oil fouling compared with the two polymeric membranes, showing superior potential in treatment of emulsified oily wastewater.     

大型商业广场亚安全区设置方式研究

针对大型商业广场类建筑普遍存在的疏散楼梯在首层不能直通室外、疏散距离过长等问题,结合某大型商业广场工程实例,通过性能化分析方法对比了两种不同亚安全区设置方式对烟气蔓延及人员疏散的影响,并给出了针对该工程实例的亚安全区设置建议,指导了该工程项目的消防设计。     

Assisting Australian indigenous resource management and sustainable utilization of species through the use of GIS and environmental modeling techniques

Information on distribution and relative abundance of species is integral to sustainable management, especially if they are to be harvested for subsistence or commerce. In northern Australia, natural landscapes are vast, centers of population few, access is difficult, and Aboriginal resource centers and communities have limited funds and infrastructure. Consequently defining distribution and relative abundance by comprehensive ground survey is difficult and expensive. This highlights the need for simple, cheap, automated methodologies to predict the distribution of species in use, or having potential for use, in commercial enterprise. The technique applied here uses a Geographic Information System (GIS) to make predictions of probability of occurrence using an inductive modeling technique based on Bayes' theorem. The study area is in the Maningrida region, central Arnhem Land, in the Northern Territory, Australia. The species examined, Cycas arnhemica and Brachychiton diversifolius, are currently being 'wild harvested' in commercial trials, involving sale of decorative plants and use as carving wood, respectively. This study involved limited and relatively simple ground surveys requiring approximately 7 days of effort for each species. The overall model performance was evaluated using Cohen's kappa statistics. The predictive ability of the model for C. arnhemica was classified as moderate and for B. diversifolius as fair. The difference in model performance can be attributed to the pattern of distribution of these species. C. arnhemica tends to occur in a clumped distribution due to relatively short distance dispersal of its large seeds and vegetative growth from long-lived rhizomes, while B. diversifolius seeds are smaller and more widely dispersed across the landscape. The output from analysis predicts trends in species distribution that are consistent with independent on-site sampling for each species and therefore should prove useful in gauging the extent of resource availability. However, some caution needs to be applied as the models tend to over predict presence which is a function of distribution patterns and of other variables operating in the landscape such as fire histories which were not included in the model due to limited availability of data.     

RAPD扩增中商品酶体系对扩增产物的影响

随机选用了10条RAPD引物，采用3种商品TapDNA聚合酶体系，以5个不同物种的动植物总DNA为模板，进行RAPD扩增，实验发现，在对同一模板、采用同一引物进行的RAPD扩增中，仅仅因为使用了不同的商品TaqDNA聚合酶，获得的扩增产物差别极大；不同商品来源的PCR反应缓冲体系，对扩增产物也有一定影响，但相对较小，这说明，不同的商品酶体系对RAPD扩增产物影响很大，因此，影响RAPD扩增产物稳定性的一个关键因素是商品TaqDNA聚合酶本身；研究中前后一致地使用同一商品TaqDNA聚合酶体系，是成功进行RAPD分析的基础。     

Interactions between lead(II) ions and dissolved organic matter derived from organic fertilizers incubated in the field

This work was to study composition characteristics and the subsequent effect on the lead (Pb) binding properties of dissolved organic matter (DOM) derived from seaweed-based (SWOF) and chicken manure organic fertilizers (CMOF) during a one-year field incubation experiment using the excitation-emission matrix-parallel factor (EEM-PARAFAC) and two-dimensional correlation spectroscopy (2DCOS) analysis. Results showed that high aromatic and hydrophobic fluorescent substances were enriched in CMOF-derived DOM and SWOF-derived DOM and enhanced over time. And phenolic groups in the fulvic-like substances for SWOF-derived DOM and carboxyl groups in the humic-like substances for CMOF-derived DOM had the fastest responses over time, respectively. Moreover, both non-fluorescent polysaccharides and fluorescent humic-like substances or fulvic-like substances with aromatic (C=C) groups first participated in the binding process of Pb to SWOF-derived DOM on day 0 and 180 during the lead binding process. In contrast, humic-like substances associated with aromatic (C=C) and phenolic groups gave a faster response to Pb binding on day 360. Regarding CMOF-derived DOM, the fulvic-like substances associated with aromatic (C=C) and carboxylic groups displayed a faster response to Pb ions on day 0. Nonetheless, polysaccharides and humic-like associated with phenolic groups had a faster response on days 180 and 360. It is noteworthy that the polysaccharides, which participated in Pb binding to CMOF-derived DOM, posed a higher risk of Pb in the environment after 360 days. Therefore, these findings gave new insights into the long-term applications of commercial organic fertilizers for the amendment of soil.     

Mass,energy and material balances of SRF production process. Part 1: SRF produced from commercial and industrial waste

This paper presents the mass, energy and material balances of a solid recovered fuel (SRF) production process. The SRF is produced from commercial and industrial waste (C&IW) through mechanical treatment (MT). In this work various streams of material produced in SRF production process are analyzed for their proximate and ultimate analysis. Based on this analysis and composition of process streams their mass, energy and material balances are established for SRF production process. Here mass balance describes the overall mass flow of input waste material in the various output streams, whereas material balance describes the mass flow of components of input waste stream (such as paper and cardboard, wood, plastic (soft), plastic (hard), textile and rubber) in the various output streams of SRF production process. A commercial scale experimental campaign was conducted on an MT waste sorting plant to produce SRF from C&IW. All the process streams (input and output) produced in this MT plant were sampled and treated according to the CEN standard methods for SRF: EN 15442, EN 15443. The results from the mass balance of SRF production process showed that of the total input C&IW material to MT waste sorting plant, 62% was recovered in the form of SRF, 4% as ferrous metal, 1% as non-ferrous metal and 21% was sorted out as reject material, 11.6% as fine fraction, and 0.4% as heavy fraction. The energy flow balance in various process streams of this SRF production process showed that of the total input energy content of C&IW to MT plant, 75% energy was recovered in the form of SRF, 20% belonged to the reject material stream and rest 5% belonged with the streams of fine fraction and heavy fraction. In the material balances, mass fractions of plastic (soft), plastic (hard), paper and cardboard and wood recovered in the SRF stream were 88%, 70%, 72% and 60% respectively of their input masses to MT plant. A high mass fraction of plastic (PVC), rubber material and non-combustibles (such as stone/rock and glass particles), was found in the reject material stream.     

The lay system in commercial fisheries: Origin and implications

In most commercial fisheries, the crew is remunerated via some form of the lay system. Under the lay system, the crew is paid with a share of revenues or a share of revenues less costs. Naturally, the presence and the functioning of the lay system are well known and accepted as one of fishery's important institutions. Compared with share contracts in agriculture, however, the lay in fisheries has garnered relatively little research. This article has two goals. First, we provide an explanation for the existence of the lay system as an incentive mechanism to alleviate a potential team agency problem. This explanation of the lay system explains anomalies, such as the presence of wages in some fisheries, that are odds with the theory of pure risk sharing. Second we show the implications of the lay system for econometric modeling of fisheries and for understanding firm behavior. In general we conclude that models that fail to account explicitly for the incentive properties of shares are likely to provide poor representations of fishing firm behavior. The thrust of the paper is that the formation and working of the lay system are a fundamental force in fisheries influencing firm behavior and research results in a way that has been largely ignored.