北京市典型废弃物焚烧源2010—2017年二NFDA1英排放特征和减排效果分析

分析2010—2017年北京市三类典型废弃物焚烧源的废气二NFDA1英排放监测数据,计算排放因子和排放量,评估减排政策成效,并分析不同排放源达标排放时同类物分布特征异同和变化规律,探讨影响排放的重要因素。结果表明: 5家焚烧源平均排放浓度为 0.008～0.069 ng/m³(以TEQ计,下同),废气二NFDA1英排放因子为 0.027～1.7 μg/t,2016年向空气中排放的二NFDA1英量为 0.002 5～0.058 g；生活垃圾、危险废物和医疗废物焚烧源的低、高氯代同类物质量分数比的平均值分别为接近于 0.5、大于0.5和小于0.5,危险废物焚烧源的 ∑PCDFs、∑PCDDs质量分数比的平均值大于2； 123478-HxCDF和123678-HxCDF质量浓度接近且线性相关,具有相近的生成机理和去除效率； I-TEQ变化趋势与∑PCDFs质量分数的变化趋势基本一致,活性炭喷射和布袋除尘的去除效率是影响二NFDA1英排放的重要因素之一；危险废物焚烧源HWI1随运行时间增加排放浓度增加,而及时更换烟道管壁有助于消除“记忆效应”的不良影响。     

中欧乘用车碳排放水平对比研究

通过计算评估中国目前主要类型乘用车的碳排放水平,并与欧盟比较,结果表明,2015年中国乘用车平均碳排放水平(151. 65 g/km)比欧盟(119. 5 g/km)高27%,二者之间约存在5年的发展差距。分析了中国和欧盟的油品质量,以及在CO2减排方面采取的主要措施,提出了发展中国低碳汽车的相关建议。     

浅谈黑龙江及乌苏里江流域废水中污染物排放特征

以跨界流域黑龙江和乌苏里江为研究对象,通过合理的流域断面设置,对流域废水中的污染物及农药残留进行分析测定,通过监测结果为以后的污染防治提供依据。     

南京市氮氧化物排放行业分布特征及减排对策

采用污染源普查资料与实地调查相结合的方法,对南京市各行业氮氧化物(NOx)排放源及排放量进行调查和梳理。结果表明:各行业NO x排放分担率依次为电力41%、机动车25%、钢铁10%、水泥9%、石化7%、其它工业5%、居民生活3%。针对南京市现状,对重点排放源提出了NO x减排措施与对策。     

复合燃料温室气体排放量计算方法探讨

当前复合燃料温室气体(GHG)排放量的计算普遍采用IPCC排放因子法,此法的运用需要依赖准确的燃料消耗计量、燃料氧化率和燃料低位热值等数据,其缺省因子是否适合有待商榷。本文通过采用实地监测手段,在获得了企业固定排放源设备的相关参数后,采用IPCC排放因子法、质量平衡法、时间比法、负荷法和热值分配法等几种方法对企业GHG排放量进行了计算。结果显示:IPCC排放因子法的计算结果并不能准确地反映企业温室气体的排放情况,而热值分配法可以较好地对燃烧复合燃料的固定燃烧源GHG排放量进行计算。建议有条件的地区采用监测法对固定燃烧源GHG排放量进行计算,而采用热值分配法对燃烧复合燃料的固定燃烧源拓展时间段的GHG排放量进行计算。     

Two-step accelerated mineral carbonation and decomposition analysis for the reduction of CO2 emission in the eco-industrial parks

Carbon dioxide（CO2） emissions are a leading contributor to the negative effects of global warming. Globally, research has focused on effective means of reducing and mitigating CO2 emissions. In this study, we examined the efficacy of eco-industrial parks（EIPs） and accelerated mineral carbonation techniques in reducing CO2 emissions in South Korea.First, we used Logarithmic Mean Divisia Index（LMDI） analysis to determine the trends in carbon production and mitigation at the existing EIPs. We found that, although CO2 was generated as byproducts and wastes of production at these EIPs, improved energy intensity effects occurred at all EIPs, and we strongly believe that EIPs are a strong alternative to traditional industrial complexes for reducing net carbon emissions. We also examined the optimal conditions for using accelerated mineral carbonation to dispose of hazardous fly ash produced through the incineration of municipal solid wastes at these EIPs. We determined that this technique most efficiently sequestered CO2 when micro-bubbling, low flow rate inlet gas, and ammonia additives were employed.     

Unregulated emissions from diesel engine with particulate filter using Fe-based fuel borne catalyst

The alteration and formation of toxic compounds and potential changes in the toxicity of emissions when using after-treatment technologies have gained wide attention. Volatile organic compound（VOC）, carbonyl compound and particle-phase polycyclic aromatic hydrocarbon（PAH） emissions were tested at European Steady State Cycle（ESC） to study unregulated emissions from a diesel engine with a fuel-borne catalyst and diesel particulate filter（FBC–DPF）. An Fe-based fuel-borne catalyst was used for this study. According to the results, brake specific emissions of total VOCs without and with DPF were 4.7 and4.9 mg/kWh, respectively, showing a 4.3% increase. Benzene and n-undecane emissions increased and toluene emission decreased, while other individual VOC emissions basically had no change. When retrofitted with the FBC–DPF, total carbonyl compound emission decreased 15.7%, from 25.8 to 21.8 mg/kWh. The two highest carbonyls, formaldehyde and acetaldehyde, were reduced from 20.0 and 3.7 to 16.5 and 3.3 mg/kWh respectively. The specific reactivity（SR） with DPF was reduced from 6.68 to 6.64 mg/kWh. Total particle-phase PAH emissions decreased 66.4% with DPF compared to that without DPF. However, the Benzo[a]pyrene equivalent（BaPeq） with DPF had increased from 0.016 to 0.030 mg/kWh.Fluoranthene and Pyrene had the greatest decrease, 91.1% and 88.4% respectively. The increase of two- and three-ring PAHs with DPF indicates that the fuel-borne catalyst caused some gas-phase PAHs to adsorb on particles. The results of this study expand the knowledge of the effects of using a particulate filter and a Fe-based fuel-borne catalyst on diesel engine unregulated emissions.     

推动能源革命,应对气候变化

<正>近年来,我国的温室气体排放量持续增长,从2007年超过美国成为全球第一排放大国,到2013年排放超过了第二、三位的美欧排放之和,占全球总量的29%。我国的能源消费总量比美国高约1/5,但二氧化碳排放接近美国的2倍。从能源结构看,我国2012年的煤炭消费是美国的4.3倍,石油不到美国的3/5,天然气消费不到美国的1/5,造成我国的能源碳强度比美国高1/4。与欧洲发达国家相比,我国的能源碳强度比英国、德国高1/4,是法国的2倍。     

嘉兴市水污染源解析及等标污染负荷评价

研究水环境污染的主要来源及主要污染物,对于区域水污染治理具有重要意义。本文通过分析嘉兴市各类污染物入河量,以及污染物等标排放量的计算,得出了嘉兴市水环境污染的主要污染物和主要污染源。结果表明,嘉兴市面源污染物的入河量大于点源,畜禽养殖是面源污染的主要来源,也是总磷的主要来源。点污染的主要来源是城镇生活,其中,桐乡市污染物入河量最大,各区县的污染物入河量总体服从桐乡市﹥南湖区﹥嘉善县﹥平湖市﹥海宁市﹥秀洲区﹥海盐县的分布。等标污染负荷的方法显示：嘉兴市的主要污染源是畜禽养殖、城镇生活和农田;总氮、氨氮和总磷为主要污染物。     

消费电子产品生产过程中挥发性有机物(VOCs)排放特征的研究

选取塑胶零件、印刷线路板及主板3类消费电子产品部件为研究对象,利用活性炭管采样,样品溶剂解吸后采用GC/MS分析,获得了各排气筒及车间内VOCs含量水平与组分特征.通过计算排放量,得出了分物种VOCs排放系数.结果表明,塑胶零件生产线排气筒总挥发性有机物(TVOCs)浓度为48.01~115.05 mg·m-3,印刷线路板为6.08~11.36 mg·m-3,主板为29.81~30.21 mg·m-3.塑胶零件生产车间内TVOCs浓度为4.23~120.58 mg·m-3,印刷线路板为1.50~2.02 mg·m-3,主板为7.01~9.93 mg·m-3.环烷烃类、酯类、苯类为主要排放物质.对于不同产品生产线的排气筒及车间废气,浓度和物种均有很大差异;对于相同产品,浓度有差异但物种基本相同.按产品分类,共计算得出了36个分物种VOCs排放系数,其中,塑胶零件、印刷线路板及主板TVOCs排放系数分别为0.626 kg·kg-1涂料用量、0.123 kg·kg-1油墨用量、0.028 kg·kg-1印刷线路板用量.通过排放量计算结果分析,3种产品中,塑胶零件生产为VOCs主要排放源,车间内无组织排放为主要排放方式.