The role of lipids in fermentative propionate production from the co-fermentation of lipid and food waste

● Lipid can promote PA production on a target from food waste. ● PA productivity reached 6.23 g/(L∙d) from co-fermentation of lipid and food waste. ● Lipid promoted the hydrolysis and utilization of protein in food waste. ● Prevotella , Veillonella and norank _f _Propioni bacteriaceae were enriched. ● Main pathway of PA production was the succinate pathway. Food waste (FW) is a promising renewable low-cost biomass substrate for enhancing the economic feasibility of fermentative propionate production. Although lipids, a common component of food waste, can be used as a carbon source to enhance the production of volatile fatty acids (VFAs) during co-fermentation, few studies have evaluated the potential for directional propionate production from the co-fermentation of lipids and FW. In this study, co-fermentation experiments were conducted using different combinations of lipids and FW for VFA production. The contributions of lipids and FW to propionate production, hydrolysis of substrates, and microbial composition during co-fermentation were evaluated. The results revealed that lipids shifted the fermentation type of FW from butyric to propionic acid fermentation. Based on the estimated propionate production kinetic parameters, the maximum propionate productivity increased significantly with an increase in lipid content, reaching 6.23 g propionate/(L∙d) at a lipid content of 50%. Propionate-producing bacteria Prevotella, Veillonella, and norank_f_Propionibacteriaceae were enriched in the presence of lipids, and the succinate pathway was identified as a prominent fermentation route for propionate production. Moreover, the Kyoto Encyclopedia of Genes and Genomes functional annotation revealed that the expression of functional genes associated with amino acid metabolism was enhanced by the presence of lipids. Collectively, these findings will contribute to gaining a better understanding of targeted propionate production from FW.     

Lithium extraction from salt lake brines with high magnesium/lithium ratio: a review

Environmental Chemistry Letters - The demand for lithium is growing rapidly with the increase in electric vehicles, batteries and electronic equipments. Lithium can be extracted from brines, yet...     

采用支持向量机算法优化电化学处理油田污水的工艺参数

采用支持向量机(SVM)算法,将Box-Behnken设计法与支持向量回归算法(SVR)实验参数优化软件相结合,优化电化学去除油田污水COD的工艺参数。通过量子粒子群算法对SVM算法参数进行优化,从建立的回归模型中找到工艺参数的全局最佳点:电解时间60 min,电解电流3 A,三维电极填充料中石英砂质量695 g。模型得到的COD理论最优去除率为92.48%,验证实验得到的COD去除率为91.43%。     

工业烟气氨法-络合法同时脱硫脱硝

在脱硫脱硝喷淋装置上采用氨法-络合法处理工业烟气。考察了吸收液pH、Fe(Ⅱ)EDTA浓度、初始烟气浓度、液气比对烟气同时脱硫脱硝效果的影响。实验结果表明:吸收液的酸碱度通过影响Fe(Ⅱ)与EDTA的络合形式进而影响NO去除率;SO_2去除率主要受吸收液pH和初始SO_2质量浓度的影响;当吸收液pH大于8、吸收液Fe(Ⅱ)EDTA浓度大于0.100 mol/L、初始SO_2质量浓度小于1 500 mg/m3、初始NO质量浓度为1 200 mg/m3时,SO_2去除率均在95%以上,NO去除率为54%;当液气比由1 L/m3增大至4 L/m3时,有效脱硫时间和有效脱硝时间分别增长了7 min和4 min。     

表面活性剂异位淋洗法修复石油污染土壤

综述了表面活性剂在石油污染土壤修复中的应用情况,介绍了表面活性剂的卷缩和增溶作用机理,分析了在异位淋洗修复中的表面活性剂浓度、复配等影响因素,并对表面活性剂在石油污染土壤修复领域的研究和应用前景进行了展望。     

Pyrolysis technologies for municipal solid waste: A review

Pyrolysis has been examined as an attractive alternative to incineration for municipal solid waste (MSW) disposal that allows energy and resource recovery; however, it has seldom been applied independently with the output of pyrolysis products as end products. This review addresses the state-of-the-art of MSW pyrolysis in regards to its technologies and reactors, products and environmental impacts. In this review, first, the influence of important operating parameters such as final temperature, heating rate (HR) and residence time in the reaction zone on the pyrolysis behaviours and products is reviewed; then the pyrolysis technologies and reactors adopted in literatures and scale-up plants are evaluated. Third, the yields and main properties of the pyrolytic products from individual MSW components, refuse-derived fuel (RDF) made from MSW, and MSW are summarised. In the fourth section, in addition to emissions from pyrolysis processes, such as HCl, SO₂ and NH₃, contaminants in the products, including PCDD/F and heavy metals, are also reviewed, and available measures for improving the environmental impacts of pyrolysis are surveyed. It can be concluded that the single pyrolysis process is an effective waste-to-energy convertor but is not a guaranteed clean solution for MSW disposal. Based on this information, the prospects of applying pyrolysis technologies to dealing with MSW are evaluated and suggested.     

非饱和土石坝渗流分析

传统的渗流分析主要考虑饱和区而忽略非饱和区内的渗流,本文基于饱和-非饱和渗流计算原理,采用有限元法考虑了非饱和区渗流的影响,并以各向同性均质坝和心墙土石坝为算例进行计算分析。算例表明,由于基质吸力产生的虹吸作用,使得浸润线上部的非饱和区内也存在着连续的水流,通过分析这种水流的特点,定性地得出其对土石坝渗流稳定性的影响。     

纳米零价铁对溶液中PCB77的降解及其影响因素

设计了以溶液初始pH值、3,3’,4,4’-四氯联苯(PCB77)初始浓度、纳米零价铁(Fe0)投加量、纳米零价硅(Si0)投加量、腐殖酸和环糊精浓度为影响因素的正交试验,研究纳米Fe0降解PCB77时各因素对反应体系中PCB77残留率、氢离子浓度及氧化还原电位变化的影响及其相互关系。结果表明,在溶液初始pH值为4.5,初始ρ(PCB77)为1 mg.L-1,纳米Fe0投加量为10 g.L-1,纳米Si0投加量为0,ρ(腐殖酸)为0.25 g.L-1,ρ(环糊精)为1 g.L-1时,反应2 h后,PCB77残留率最低,为35.2%。溶液初始pH值对反应体系中PCB77的残留率影响最大,纳米Fe0投加量次之;溶液初始pH值对反应体系中氢离子浓度变化影响最大,环糊精投加量次之;PCB77初始浓度对反应体系中氧化还原电位变化影响最大,纳米Fe0投加量次之。     

BP-4的模拟生物降解特性研究

为研究紫外吸收剂2-羟基-4-甲氧基二苯甲酮-5-磺酸(BP-4)的最大生物降解能力,采用欧洲经济合作与发展组织(OECD)生物降解测试标准方法——303A模拟试验-污水好氧处理:活性污泥单元法,建立并进行了城市污水处理厂曝气池环境模拟试验。研究结果表明:在单一新鲜活性污泥作为接种物条件下,BP-4在第47天达到降解稳定期,溶解性有机碳(DOC)去除率平均值为36.90%±5.68%(n=18)。在以10种不同来源混合接种物条件下,BP-4在第41天达到降解稳定期,去除率平均值为33.11%±4.87%(n=17)。研究结果表明BP-4在环境中的降解能力有限,在本模拟方法试验条件下只能部分降解。     

赤霉酸暴露对SD大鼠青春期发育的影响

赤霉酸是目前国内外使用极其广泛的一种植物生长调节剂,但是针对其发育毒性的数据依然较少。本文探讨了赤霉酸暴露对SD大鼠青春期发育的影响。参考国内外环境内分泌干扰物危害的评价方法,将144只初断乳SD大鼠按体重随机分为4组,分别为对照组和1、10、100 mg·kg-1bw剂量组,采用经口灌胃方式对雄鼠连续染毒28 d,雌鼠连续染毒21 d。暴露结束后检测大鼠的体重、食物利用率、雄鼠包皮分离时间/雌鼠阴道开口时间、血清生化指标、脏器系数及组织病理学的变化。研究结果表明,与对照组相比,仅10和100 mg·kg-1bw剂量组雄鼠的肌酐水平显著升高(P<0.01),100 mg·kg-1bw剂量组雌鼠谷丙转氨酶水平有显著升高(P<0.01)。而与对照组相比,所有剂量组均未观察到大鼠的体重、食物利用率、雄鼠包皮分离时间/雌鼠阴道开口时间、脏器系数等指标有显著性差异的改变(P>0.05),组织病理学结果亦显示大鼠重要器官无损害性改变。因此,在本试验给予的剂量范围内赤霉酸染毒不会对SD大鼠青春期发育产生显著影响。