Determination of Frequency for Remeasuring Ground and Vegetation Cover Factor Needed for Soil Erosion Modeling

Determining a remeasurement frequency of variables over time is required in monitoring environmental systems. This article demonstrates methods based on regression modeling and spatio-temporal variability to determine the time interval to remeasure the ground and vegetation cover factor on permanent plots for monitoring a soil erosion system. The spatio-temporal variability methods include use of historical data to predict semivariograms, modeling average temporal variability, and temporal interpolation by two-step kriging. The results show that for the cover factor, the relative errors of the prediction increase with an increased length of time interval between remeasurements when using the regression and semivariogram models. Given precision or accuracy requirements, appropriate time intervals can be determined. However, the remeasurement frequency also varies depending on the prediction interval time. As an alternative method, the range parameter of a semivariogram model can be used to quantify average temporal variability that approximates the maximum time interval between remeasurements. This method is simpler than regression and semivariogram modeling, but it requires a long-term dataset based on permanent plots. In addition, the temporal interpolation by two-step kriging is also used to determine the time interval. This method is applicable when remeasurements in time are not sufficient. If spatial and temporal remeasurements are sufficient, it can be expanded and applied to design spatial and temporal sampling simultaneously.     

鱼吸收富集LAS的分析研究进展

LAS对鱼等水生生物均产生有害影响,会破坏鱼鳃上皮组织、影响其相关功能(如通透性等)。LAS经由鱼鳃吸收、并通过血液输送到鱼体中各组织。LAS疏水性越大,其在鱼体中生物富集系数越大。水硬度等影响鱼吸收、富集LAS。鱼体中LAS生物转化过程减小了LAS生物富集。鱼体中LAS及其生物转化产物大多是经过固相萃取或基质固相分散萃取后,采用HPLC或HPLC/MS等方法进行分析。     

铜锌同位素方法在环境地球化学研究中的应用

近年来,随着多接收电感耦合等离子体质谱(MC-ICP-MS)逐渐应用,过渡族金属(Cu,Zn和Fe等)同位素测试方法逐渐成熟,测定精度可达0.04‰,使得铜锌铁等同位素地球化学研究成为近年来国际地学研究领域的热点。本文对铜锌同位素的测试方法、分馏机理及其在环境地球化学研究领域的应用进行了较系统综述。     

大跨结构多维多点输入抗震研究进展

对于大跨度结构来说,应该考虑地震动的多维多点效应。从国内外发展现状及取得的主要研究进展和近期的发展动向等角度,对大跨度结构多维多点输入抗震的研究现状进行了系统的综述和总结。首先论述了多维地震动及其相关性,从地震动的各个分量之间的强度比、频率、持时及相关性等方面说明地震动分量的特性;然后论述地震动时空模型,侧重于反映地震动空间变化的相关函数模型的研究现状;最后比较了大跨度结构考虑多维多点输入的抗震计算方法,包括反应谱法、时程分析法以及随机振动分析法。对今后关于这一问题所应开展的研究提出了建议。     

Perceptions of safety on a shared road: Driving,cycling, or walking near an autonomous vehicle

Introduction: While improved safety is a highly cited potential benefit of autonomous vehicles (AVs), at the same time a frequently cited concern is the new safety challenges that AVs introduce. The literature lacks a rigorous exploration of the safety perceptions of road users who will interact with AVs, including vulnerable road users. Addressing this gap is essential because the successful integration of AVs into transportation systems hinges on an understanding of how all road users will react to their presence. Methods: A stated preference survey of the Phoenix, Arizona, metropolitan statistical area (Phoenix MSA) was conducted in July 2018. A series of ordered probit models was estimated to analyze the survey responses and identify differences between various population groups with respect to the perceived safety of driving, cycling, and walking near AVs. Results: Greater exposure to and awareness of AVs are not uniformly associated with increases in perceived safety. Various attitudinal factors, level of AV automation, and other intrinsic and extrinsic factors are related to safety perceptions of driving, walking, and cycling near AVs. Socioeconomic and demographic characteristics, such as gender, age, income, employment, and automobile usage and ownership, have various relationships with perceived safety. Conclusions: Cycling near an AV was perceived as the least safe activity, followed by walking and then driving near an AV. Both similarities and differences were observed among the factors associated with the perceived safety of different travel alternatives. Practical Applications: Public perception will guide the development and adoption of AVs directly and indirectly. To help maintain control of public perception, transportation planners, decision makers, and other stakeholders should consider more deliberate and targeted messaging to address the concerns of different road users. In addition, more careful pilot testing and more direct attention to vulnerable road users may help avoid a backlash that could delay the rollout of this technology.     

铁路沿线可燃重气储罐最小隔离区域划分探讨*

为保护铁路线,以某化工厂距离高铁路线最近的丙烯球罐为例,提出丙烯球罐泄漏最小隔离区域划分方法以及2种保护高铁线路方案,利用重气扩散模型和定量风险评价（QRA）软件分别进行丙烯扩散模拟、爆炸模拟,并进行危险与可操作性分析（HAZOP）和保护层分析（LOPA）。结果表明:球罐发生泄漏及火灾爆炸等事故,会给附近铁路线带来严重破坏;丙烯泄漏或球罐因周围其他设备设施或可燃物质着火而温度升高时,保护措施不足;隧道的安全可靠性要高于仅设1道防爆墙,隧道长度需覆盖最小隔离区域的可及范围,在扩散区域内也需设立普通挡墙,在极度危险情况下,需要实施高铁停开等保护措施。     

中国生态环境科技创新体系建设研究

分析国内外生态环境科技创新的发展现状,相比较国外以市场机制为导向、以企业为创新主体、政府通过政策和管辖支撑创新的体系特征,我国已形成四大类环境类科创载体,但尚未形成成熟有效的技术成果产业化机制以及市场与政策协同促进科技创新的发展模式。本文根据生态环境科技创新的强政策驱动性、技术验证放大周期长以及集成性强的特点,重点通过环境技术研发、技术成果转化、技术放大与赋能、产业拓展与推广四个方面阐述了生态环境科技创新体系建设的主要环节：环境技术的研发由以科研机构为主的传统自发性研发、企业迭代性研发和联合应用型研发组成;技术成果的转化经历挖掘发现、技术识别与判断、知识产权评估评价后进入已成立的企业或新设公司,在这一过程中,成果转化专业队伍起着至关重要的作用;技术放大与赋能旨在为有创新技术的企业提供科技创新政策、二次研发中试验证、首台套工程案例、投融资等资源的对接,以协助初创企业成长;产业的拓展与推广则通过为解决环境问题形成集成方案、孵化平台为企业背书和产业政策匹配等方式助力企业长期发展。最后从加强专业化创新平台、技术评估体系、成果转化人才培养体系建设以及疏通投融资渠道等方面对中国未来生态环境科技创新发展提出相关建议。     

基于模糊推理的FRAM事故定量分析方法研究

为有效克服FRAM事故分析中无法进行定量分析的缺陷,提出结合模糊推理技术的Fuzzy FRAM模型。此改进模型基于FRAM识别系统运行状态;依据功能输出要素的时间/精度属性利用Matlab构建2阶模糊推理系统量化功能输出质量;根据通用性能条件(CPC)及功能输入耦合端口构建功能评价体系,针对评价体系中存在的不确定性信息融合及建模问题,采用模糊证据推理技术,通过模糊信度结构建立、数据处理、信息融合测度后获得功能的风险指数;以既有铁路危险品运输事故为例,验证方法的可行性。结果表明:Fuzzy FRAM模型的评估结果较为精确,是FRAM分析方法的有效补充。     

Spatial and Seasonal Response of Municipal Water Use to Weather across the Contiguous U.S.

Weather variability has the potential to influence municipal water use, particularly in dry regions such as the western United States (U.S.). Outdoor water use can account for more than half of annual household water use and may be particularly responsive to weather, but little is known about how the expected magnitude of these responses varies across the U.S. This nationwide study identified the response of municipal water use to monthly weather (i.e., temperature, precipitation, evapotranspiration [ET]) using monthly water deliveries for 229 cities in the contiguous U.S. Using city‐specific multiple regression and region‐specific models with city fixed effects, we investigated what portion of the variability in municipal water use was explained by weather across cities, and also estimated responses to weather across seasons and climate regions. Our findings indicated municipal water use was generally well‐explained by weather, with median adjusted R² ranging from 63% to 95% across climate regions. Weather was more predictive of water use in dry climates compared to wet, and temperature had more explanatory power than precipitation or ET. In response to a 1°C increase in monthly maximum temperature, municipal water use was shown to increase by 3.2% and 3.9% in dry cities in winter and summer, respectively, with smaller changes in wet cities. Quantifying these responses allows urban water managers to plan for weather‐driven variability in water use.