A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Environmental Science and Pollution Research - Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under...     

Special issue on contamination,remediation and health for pollutants in natural aquatic,soil, sediments and atmospheric environments

Environmental Geochemistry and Health -     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

2005-2019年我国重特大安全生产事故特征分析

为探究我国重特大安全生产事故特征,选取2005-2019年国内852起重特大事故作为研究对象,基于Python编程语言针对重特大事故发生的年份、季度、月份、工作日与非工作日、地域特征进行分析.结果表明:2005-2019年,国内重特大安全生产事故起数和死亡人数均在不断下降;第四季度发生重特大事故最多,而第三季度平均每起事故造成的死亡人数最多;重特大事故数量和死亡人数随月份显示出反复波动的趋势,均呈现3个"^",形;工作日期间发生的重特大事故数量最多,非工作日平均事故率最大;国庆节是重特大事故发生最多的节假日;贵州、湖南、山西、云南、河南等省份"十四五"期间需要重点加强安全和应急管理.     

内螺纹变截面铜管拉伸工艺的研究

此文提出了内螺纹变截面铜管分段拉仲一次成形新工艺,并就工艺因素对该管拉伸成形的影响进行了试验研究,从而为合理制订成形工艺提供了依据。     

Community-Based Integrated Watershed Management

1 INTRODUCTIONIn the past, natural resources management initiatives havefocused on large but specific sector projects such as dams,reservoirs for water supply schemes, irrigation systems,crop production, at forestation, etc. Often these projectswere treated as technical and administrative issues ratherthan as a socio-economic and political one. However, thehigh social and environmental cost of such schemes haveled to a change of paradigm since the 1980s towards small-scale community projec…     

灰色协调度模型在产业用水系统分析中的应用

揭示产业用水系统的时空动态发展规律，探讨其内部的协调关系，是开展节水型社会建设规划，实现水资源可持续利用的关键。然而，目前对产业用水系统的协调性分析还缺乏较为有效的理论和方法。以往在利用协调度模型进行用水系统有序度研究时，通常采用两段叙述的线性分段函数表示，较不适用于描述产业用水系统内部要素的非线性结构。因此，针对产业用水系统的特性，利用灰关联原理建立有序度函数，以建立更适于用水系统分析的灰色协调度模型。利用该模型对上海市1997~2005年产业用水系统进行实证研究，结果显示：上海市产业用水系统基本有序，发展比较协调，其用水综合效益较大，但距离最优状态尚有潜力可挖；其中，农业用水子系统的发展较为欠缺，在未来用水规划中应予以重视。     

关于长江产业带建设总体布局的初步思考

重点开发长江是90年代中国经济重大战略布署。将长江产业带建设成具有强大经济实力的国家一级经济轴线,宜采用分层次推进与中心辐射相结合的发展战略,以浦东开发和三峡建设为契机,加强基础产业,发展新兴产业和第三产业,优化产业结构,以能源和交通建设先行,改善基础设施。同时,要协调产业带建设与浦东开发、三峡工程建设的关系。     

金属加工过程中应力状态的分析方法

分析简单地拉伸、压缩和扭转的情况时,应力状态能容易地被确定.但是,实际上在金属加工过程中材料是承受复杂的应力状态,在模具——工件接触面上增加有摩擦力.而且,这些应力和摩擦力一般地沿着接触面变化.准确的计算或预测载荷、力、应力和温度,不但对设计适宜的设备是重要的,而且对研究工艺期间材料的变化过程也是重要的.本文将讨论材料变形过程中所运用的主要分析方法及其优缺点.