A comprehensive review on green buildings research: bibliometric analysis during 1998–2018

Environmental Science and Pollution Research - Buildings account for nearly 2/5ths of global energy expenditure. Due to this figure, the 90s witnessed the rise of green buildings (GBs) that were...     

A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Environmental Science and Pollution Research - Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under...     

Will polycentric cities cause more CO2 emissions? A case study of 232 Chinese cities

From 2000 to 2010 China experienced rapid economic development and urbanization. Many cities in economically developed areas have developed from a single-center status to polycentricity. In this study, we used exploratory spatial data analysis (ESDA) to identify the population centers, which identified 232 cities in China as having urban centers. COMP was used to represent urban agglomeration, and POLYD (representing how far is the city's sub-centers to the main center), POLYC (representing the number of a city's centers), and POLYP (representing the population distributed between the main center and the sub-centers) were used to indicate urban polycentricity. Night light data were used to determine the CO₂ emissions from various cities in China. A mixed model was used to study the impact of urban aggregation and polycentric data on the CO₂ emission efficiency in 2000 and 2010. The study found that cities with higher compactness were distributed in coastal areas, and the cities with higher multicentricity were distributed in the Yangtze River Delta and Shandong Province. The more compact the city was, the less conducive it was to improving CO₂ emission efficiency. Polycentric development of the city was conducive to improving the CO₂ emission efficiency, but the number of urban centers had no significant relationship with the CO₂ emission efficiency. Our research showed that the compactness and multicentricity of the city had an impact on the CO₂ emission efficiency and provided some planning suggestions for the low carbon development of the city.     

弹射起飞和拦阻着陆冲击试验方法探讨

目的研究舰载机机载装备弹射起飞和拦阻着陆冲击试验的工程实现方法。方法从GJB 150.18A—2009、MIL-STD-810F/G及其提供的实测数据出发,分析弹射起飞和拦阻着陆冲击载荷特征,对几种常用试验方法的工程实现进行探讨和比较。结果弹射起飞和拦阻着陆冲击具有瞬态、交变、低频、大位移、高速度等特征。阻尼正弦波方法的实施路径比较明确,复杂波形再现方法实施路径比较模糊且复杂,超长脉冲半正弦波方法具有多种局限性,前两种方法的速度、位移都较大。结论阻尼正弦波方法较复杂波形再现方法更容易实现,但两者都需要大位移、高速度的专用冲击试验设备和适当的波形处理技术,超长脉冲半正弦波方法在前面两种标准推荐方法能够实现时,不建议使用。     

GA-g-PAMPS/AA/ST凝胶的制备及对亚甲基蓝吸附性能

采用微波辐射技术,通过接枝共聚反应制备了阿拉伯胶（GA）-g-2-丙烯酰胺-2-甲基丙磺酸（AMPS）/丙烯酸（AA）/海泡石黏土（ST）（GA-g-PAMPS/AA/ST）复合水凝胶,利用FTIR、XRD、SEM对复合水凝胶进行了表征,研究了水凝胶对水溶液中亚甲基蓝（MB）染料的吸附性能.结果显示：GA、ST和AA与AMPS发生了接枝共聚反应,形成具有均匀三维网络结构的复合水凝胶.0.025g水凝胶可以使体积为50mL、pH值为6.4、浓度为600mg/L的MB溶液的吸附量和吸附率分别达1146mg/g和95.5%,水凝胶具有较好的重复利用性能.Freundlich等温模型和准二级动力学模型能更好地描述吸附过程.热力学研究表明水凝胶对亚甲基蓝吸附是自发、吸热和不可逆的过程.该水凝胶可用作阳离子染料和阳离子型污染物的潜在候选生物质吸附剂.     

昆明市地下水污染防治现状与对策

文章以昆明市为例,分析了昆明市地下水水质现状及变化趋势,总结了地下水污染防治工作成效和存在问题。分析表明,由于长期未受到充分重视,昆明市地下水已呈现出污染加重的趋势。近年来,昆明市地下水污染防治取得了一定的成绩,但仍然存在监管能力不足、监测网络覆盖不全的问题。在此基础上提出了开展地下水环境状况调查评估、磷石膏堆场地下水污染防控与修复试点和进一步完善地下水环境监测网络的对策建议,为昆明市和其他南方城市做好地下水污染防治工作提供借鉴。     

重庆九龙坡城区和城郊大气污染物浓度特征研究

为了解重庆市九龙坡区城区和城郊大气污染物浓度特征,分析了城区和城郊国控空气站点2014年3月~2015年2月典型污染物的浓度变化。结果表明,除O_3表现出夏高冬低的季节变化趋势外,其它污染物均表现出冬高夏低的季节变化趋势。PM_(2.5)污染最严重,城区和郊区日均值超标率分别为31.4%和33.4%。城区和城郊的PM_(2.5)浓度之间没有显著性差异(p0.05),城郊O_3浓度显著高于城区(p0.01),NO_2、SO_2、CO和PM_(10)则是城区显著高于城郊(p0.01)。     

COD快速分析高氯废水的实验研究

对水中氯离子含量超过10000mg／L时进行除氯的预处理，保证了分析数据的真实、准确、可靠。     

地下水环境质量变化动态研究

以邢台市环境保护监测站１０年来的监测资料为依据，运用单因子比值法，环比发展速率外推法和直线回归法，对地下水环境质量现状及１０年的动态变化进行了分析，研究和评述，并对发展趋势做了预测性评价。     

上海汽车制造业涂装废气VOCs排放特征

于2015年10月对上海市嘉定区4家(A、B、C、D)汽车制造企业涂装废气ρ(VOCs)和组成特征进行了调查分析。结果表明,A、B、C、D厂涂装废气排放口ρ(VOCs)总为0. 743～6. 11 mg/m~3,主要检出物和最高检出值分别为:A厂二甲苯2. 06 mg/m~3、B厂二甲苯0. 578 mg/m~3、C厂甲苯2. 59 mg/m~3、D厂庚烷0. 274 mg/m~3;芳香烃类是A、B、C厂排放比例最高的VOCs组分,烷烃类是D厂排放比例最高的VOCs组分。指出,原、辅料种类影响排放物的主要成分,废气处理工艺类型影响排放物主要成分和浓度。