Simultaneous removal of cyanobacterial blooms and production of clean water by coupling flocculation with a rotary drum filter

Environmental Science and Pollution Research - A mechanical harvesting technology based on coupling flocculation with a rotary drum filter (RDF, 35-μm) was applied to remove cyanobacterial...     

The land carrying capacity and environmental risk assessment of livestock and poultry breeding considering crop planting

Environmental Science and Pollution Research - At present, the contradiction between survival and ecology necessitates the integration of crop planting, chemical fertilizer application, and...     

Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

Characteristic and mechanism of sorption and desorption of benzene on humic acid

Environmental Science and Pollution Research - The sorption/desorption behaviors of benzene, toluene, ethylbenzene, and xylene (BTEX) on soil organic matter (SOM) have a significant influence on...     

2005-2019年我国重特大安全生产事故特征分析

为探究我国重特大安全生产事故特征,选取2005-2019年国内852起重特大事故作为研究对象,基于Python编程语言针对重特大事故发生的年份、季度、月份、工作日与非工作日、地域特征进行分析.结果表明:2005-2019年,国内重特大安全生产事故起数和死亡人数均在不断下降;第四季度发生重特大事故最多,而第三季度平均每起事故造成的死亡人数最多;重特大事故数量和死亡人数随月份显示出反复波动的趋势,均呈现3个"^",形;工作日期间发生的重特大事故数量最多,非工作日平均事故率最大;国庆节是重特大事故发生最多的节假日;贵州、湖南、山西、云南、河南等省份"十四五"期间需要重点加强安全和应急管理.     

河口切变锋引起的滩槽泥沙交换效应

切变锋是河口湾锋系中最为常见和最易观察到的锋面类型。本文对长江口的切变锋进行现场观察和滩，槽同步水文资料分析，简述了长江口切变锋发生的部分和基本特性，提出了切变锋引起的滩，槽泥沙呈现螺旋形交换形式等论点。     

内螺纹变截面铜管拉伸工艺的研究

此文提出了内螺纹变截面铜管分段拉仲一次成形新工艺,并就工艺因素对该管拉伸成形的影响进行了试验研究,从而为合理制订成形工艺提供了依据。     

长江三峡柑桔的冻害和热害（二）

本文从柑桔冻害和热害的危害因子和指标等级划分的研究和选取入手,着重探讨了长江三峡地区(湖北境内)两害显著的时空变化特征、差异与关联性及对柑桔生产的影响;揭示了80年代以来冬暖春热的重大气候变化是使两害向“两极分化”的根本原因;讨论了三峡水利工程对两害时空格局的可能调整及减灾原理;最后提出了可能的对策。     

Processes involved in uptake and release of nitrogen dioxide from soil and building stones into the atmosphere

Atmospheric NO₂ was taken up by samples of various soils and building stones. The NO₂ uptake rate constants were highest in soil samples taken during the summer months. However, the NO₂ uptake rate constants of the soils and building stones were not significantly correlated with any of the following variables: moisture, pH, ammonium, nitrite, or nitrate. NO₂ uptake by soil and stone was not abolished by autoclaving indicating a chemical uptake process. NO₂ uptake by acidic and air-dry soils and stones resulted in nearly stoichiometric reduction of NO₂ to NO. This reduction was enhanced by the addition of ferrous iron and was further enhanced by incubation under 1 ppmv SO₂. The results suggest that NO₂ reduction may be coupled to oxidation of ferrous to ferric iron which may be reduced again by atmospheric SO₂ thus regenerating the ferrous iron content of the soil or stone. Conversion of NO₂ to NO was not observed in neutral or/and moist soils and stones. NO₂ was also taken up by purified and sterilized quartz sand moistend with water. This uptake was enhanced by addition of humic material but not by addition of bacteria which both had been extracted from genuine soil. Under most conditions, only uptake but no release of NO₂ was observed. However, NO₂ was released in air-dry soils that were heated to 45–65°C, or in ammonium-fertilized soil or stone that was drying up at room temperature. Under the latter conditions mimicking field practice, the NO₂ release reached rates that were similar to the NO release rates.     

金属加工过程中应力状态的分析方法

分析简单地拉伸、压缩和扭转的情况时,应力状态能容易地被确定.但是,实际上在金属加工过程中材料是承受复杂的应力状态,在模具——工件接触面上增加有摩擦力.而且,这些应力和摩擦力一般地沿着接触面变化.准确的计算或预测载荷、力、应力和温度,不但对设计适宜的设备是重要的,而且对研究工艺期间材料的变化过程也是重要的.本文将讨论材料变形过程中所运用的主要分析方法及其优缺点.