智能手机线路板中贵金属资源化价值评价

为了解智能手机线路板中贵金属资源化价值,采用王水消解-ICP方法、Gompertz模型和卡内基梅隆模型分析其不同元器件中贵金属(金、银和钯)含量及其资源化价值。结果表明:贵金属主要分布在芯片和焊锡(掺杂电容电阻)中,其金、银和钯含量分别为321.6、332.01、2.86 mg·kg~(-1)和27.61、1 838.07、7.16 mg·kg~(-1)。其中,芯片中金含量最高,占到贵金属总含量的69.90%。经预测,2020年智能手机报废量约为3.06亿部,且预测芯片中贵金属资源化价值最高,约占贵金属总价值的57.70%。因此,建议对智能手机贵金属资源化回收时,芯片单独进行贵金属回收,可提高其回收效率。     

废电子电器回收处理体系研究

分析了废电子电器回收处理体系的问题,提出了一种适合我国国情的废电子电器回收处理体系模式,并对国家对废电子电器回收处理体系的支持问题进行了讨论。     

废铅酸蓄电池的环境管理

简要分析了我国废铅酸蓄电池的回收和再利用的现状、技术水平以及在管理中存在的问题，提出了对废铅酸蓄电池在环境管理方面的建议和对策。     

废电子电器回收处理体系研究

分析了废电子电器回收处理体系的问题，提出了一种适合我国国情的废电子电器回收处理体系模式，并对国家对废电子电器回收处理体系的支持问题进行了讨论。     

废印刷电路板回收利用探讨

通过对废印刷电路板的结构和物质组成的分析,并对可能的各种回收利用的方法及其原理进行了分析和对比,从而得出二次污染小且成本低的回收利用的方法和原则流程,为废印刷电路板的回收利用提出了一个方向性的建议.     

废硫酸和废白泥制取二水石膏

利用废硫酸和废白泥制取二水石膏的技术于1988年12月24日在杭州通过鉴定。这项技术解决了钛白废酸和废白泥变废为宝的出路,所制取的石膏可作为水泥缓凝剂。杭州硫酸厂生产钛白粉过程中产生了4％浓度的废硫酸25000吨,与相邻的华丰造纸厂碱回收中所产     

废食用油脂作生物柴油原料的可行性分析

分析了各国废食用油脂的产生、回收和法规管理现状.重点通过分析废食用油脂物化性质,评价利用废食用油脂制造生物柴油的工艺特征和技术可行性.探讨了利用废食用油脂制造的生物柴油产品的品质和环境效益以及使用要求.同时分析了利用废食用油脂制造生物柴油的经济成本和存在的问题.     

电解液循环对废手机线路板碱性矿浆电解回收的影响

针对废手机线路板碱性矿浆电解资源化过程中电解液带来的污染问题,采用氨-氯化铵碱性矿浆电解液循环回收废手机线路板中金属,以降低能耗、减少污染.研究了氨-氯化铵碱性矿浆电解体系从废手机板制备阴极铜的过程中,电解液循环对Cu的回收率、电流效率、Cu纯度以及Cu和Ni、Zn、Pb等金属迁移转化的影响.经过7次电解液循环实验,结...     

废食用油脂作生物柴油原料的可行性分析

分析了各国废食用油脂的产生、回收和法规管理现状。重点通过分析废食用油脂物化性质，评价利用废食用油脂制造生物柴油的工艺特征和技术可行性。探讨了利用废食用油脂制造的生物柴油产品的品质和环境效益以及使用要求。同时分析了利用废食用油脂制造生物柴油的经济成本和存在的问题。     

富氧条件下流化床内Ru基双贵金属催化去除碳颗粒

采用等体积浸渍法制备了系列Ru基双贵金属催化剂.利用程序升温技术研究了富氧条件下Ru基双贵金属催化剂催化氧化碳颗粒的反应,考察了双贵金属活性组分比例、载体以及双贵金属组合对催化活性的影响.还对固定床与流化床内碳颗粒氧化进行了比较,分析了流化床内碳颗粒低温氧化的原因.结果表明,双贵金属摩尔比为1∶1时具有较高的催化活性,复合载体TiO2/SiO2更易与双贵金属组分形成协同效应,不同贵金属取代形成的双贵金属催化剂中,Ru-X/TiO2/SiO2(X=Rh、Ag和Ir)的催化活性较高.与固定床相比,流化床因其良好的传热和传质特性,使得碳颗粒催化氧化温度最多可降低50℃左右.流化床是一种类似于尾气中气流流动状态的反应装置,具有潜在的应用前景.     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

不同泥源对厌氧氨氧化反应器启动的影响

采用2套上流式生物膜反应器,分别接种少量厌氧氨氧化污泥和大量硝化污泥,考察其对厌氧氨氧化反应器启动的影响。污泥接种入反应器后,测得接种厌氧氨氧化污泥的反应器(R1)内MLSS为0.22 g/L,另一个反应器(R2)MLSS为2.7 g/L。与直接接种厌氧氨氧化污泥相比,R1经过72 d的运行才显现出厌氧氨氧化特性。经过114 d的培养,前者氮去除速率由0.23 kg/(m3.d)提升到5.29 kg/(m3.d),总氮去除率大于89%;R2的氮去除速率由0.01 kg/(m3.d)提升到1.1 kg/(m3.d),总氮去除率大于84.6%。说明普通污泥启动需要一个较长的筛选过程,直接接种少量的厌氧氨氧化污泥比接种普通的污泥能够更快启动厌氧氨氧化反应器。     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

造纸废水混凝处理中SFT助凝替代性研究

中小造纸厂废水处理常用PAC作混凝剂 ,PAM作助凝剂。由于PAM成本很高 ,影响了处理设备的投运率。用超细滑石粉 (SFT)替代PAM助凝 ,与混凝剂PAC配合 ,其混凝处理效果基本相当 ,但是处理成本降低 0 .10元 /m3 。由于SFT属环境无害材料 ,不会给排泥带来二次污染     

产油微藻培养与回收的关键技术研究进展

寻找廉价而高效的替代原料是实现生物柴油产业化的关键所在.微藻以含油量高、生长周期短、环境适应能力强、生物产量高等优点,有望成为一种极具潜力的生物柴油生产原料.然而,目前尚存在微藻培养低效成本高和微藻回收效率低两大难题.综述了微藻培养与回收过程中的关键技术,并对存在的两大难题及其改进技术进行了详细的探讨.最后,总结并展望了微藻培养、回收技术未来的发展趋势.     

活性炭三维电极法对印染废水的处理研究

对三维电极方法处理印染废水进行了实验研究,初步探讨了活性炭三维电极法处理印染废水的机理,对影响处理效果的各种要素,如反应时间、槽电压和pH值等进行了条件实验,得出了活性炭三维电极法处理印染废水的最佳运行条件为:停留时间120-180 min,槽电压25～30 V,进水pH值6.5～7.5。结果表明,该反应器能有效地降低废水色度,有较高的COD去除效率,并能提高印染废水的可生化性。     

红土吸附砷对其动电电位的影响

研究了遵义红土吸附砷对其动电电位的影响 ,从砷酸根浓度和体系pH对红土动电电位影响的角度作了探讨 ,结果表明 ,砷酸根离子浓度越大 ,Zata电位下降幅度越大 ,Zata电位也越低 ;随着体系pH的升高 ,氧化铁胶体动电电位逐渐下降 ,甚至改变了表面电位的符号。由此得出了红土吸附砷属于专性吸附的结论。     

生物质快速热裂解主要参数对生物油产率的影响

以松木木屑为原料,在自制的小型流化床上,开展了生物质热裂解温度、生物质粒径和进料速率对生物油产率的影响实验研究.结果表明,在热裂解温度分别为450、475、500、525和550℃条件下,当热裂解温度为500℃时,生物油产率最高,平均产率达到53.33%(质量百分比).反应温度越高,炭产量越低,不可冷凝气体产量越高,气体发热值越高;粒径＜1 mm的生物质其粒径对生物油产率影响不大;生物质进料速率增加时,生物油产率增加.本研究为生物能的利用提供了新的途径.     

Evaluation of the presence of drugs of abuse in tap waters

A total of seventy samples of drinking water were tested for non-controlled and illicit drugs. Of these, 43 were from Spanish cities, 15 from seven other European countries, three from Japan and nine from seven different Latin American countries. The most frequently detected compounds were caffeine, nicotine, cotinine, cocaine and its metabolite benzoylecgonine, methadone and its metabolite EDDP. The mean concentrations of non-controlled drugs were: for caffeine 50 and 19 ng L⁻¹, in Spanish and worldwide drinking water respectively and for nicotine 13 and 19 ng L⁻¹. Illicit drugs were sparsely present and usually at ultratrace level (<1 ng L⁻¹). For example, cocaine has mean values of 0.4 (Spain) and 0.3 ng L⁻¹ (worldwide), whereas for benzoylecgonine, these mean values were 0.4 and 1.8 ng L⁻¹, respectively. Higher concentrations of benzoylecgonine were found in Latin American samples (up to 15 ng L⁻¹). No opiates were identified in any sample but the presence of methadone and EDDP was frequently detected. Total mean values for EDDP were 0.4 ng L⁻¹ (Spain) and 0.3 ng L⁻¹ (worldwide). Very few samples tested positive for amphetamines, in line with the reactivity of chlorine with these compounds. No cannabinoids, LSD, ketamine, fentanyl and PCP were detected.