Hydrogen production by electrocatalysis using the reaction of acidic oxygen evolution: a review

Environmental Chemistry Letters - Electricity-driven proton exchange membrane water electrolyzers are a promising technology to produce dihydrogen gas (H2). However, this technology is limited by...     

Conversion of biomass into hydrogen by supercritical water gasification: a review

Environmental Chemistry Letters - The rising issues of global warming due to the rapid use of fossil fuels are calling for sustainable energies such as dihydrogen, thereafter named...     

Cobalt-based catalysts for hydrogen production by thermochemical valorization of glycerol: a review

Environmental Chemistry Letters - Rising energy needs and the exhaustion of fossil fuels are calling for renewable fuels such as dihydrogen (H2), commonly named 'hydrogen.' Biomass...     

Higher hydrogen production by photocatalytic water splitting using a hollow tubular graphitic carbon nitride-zinc telluride composite

Environmental Chemistry Letters - Energy demand and pollution due to urbanization and industrialization are calling for clean energies such as dihydrogen (H2) obtained by water splitting. For that,...     

Biofuel production,hydrogen production and water remediation by photocatalysis,biocatalysis and electrocatalysis

The energy crisis and environmental pollution have recently fostered research on efficient methods such as environmental catalysis to produce biofuel and to clean water. Environmental catalysis refers to green catalysts used to breakdown pollutants or produce chemicals without generating undesirable by-products. For example, catalysts derived from waste or inexpensive materials are promising for the circular economy. Here we review environmental photocatalysis, biocatalysis, and electrocatalysis, with focus on catalyst synthesis, structure, and applications. Common catalysts include biomass-derived materials, metal–organic frameworks, non-noble metals nanoparticles, nanocomposites and enzymes. Structure characterization is done by Brunauer–Emmett–Teller isotherm, thermogravimetry, X-ray diffraction and photoelectron spectroscopy. We found that water pollutants can be degraded with an efficiency ranging from 71.7 to 100%, notably by heterogeneous Fenton catalysis. Photocatalysis produced dihydrogen (H₂) with generation rate higher than 100 μmol h⁻¹. Dihydrogen yields ranged from 27 to 88% by methane cracking. Biodiesel production reached 48.6 to 99%.

     

Influence of iron, nickel and cobalt on biogas production during the anaerobic fermentation of fresh residual biomass

We have investigated the dependence of the rate of the production of biogas upon the concentration of nickel, cobalt and iron at sub-toxic concentration and monitored its composition as amount of hydrogen, methane and carbon dioxide. The distribution of the added metals between the liquid and solid phase has also been monitored.

The results of our investigations show that the addition of any of the listed metals to the sludge may cause the production of a higher amount of biogas and influence the methane or carbon dioxide percentage. Conversely, the effect on the hydrogen production depends upon the metal added, the age of the active sludge used, and its adaptation to the susbtrate. As a general feature, during the acidogenesis phase, nickel reduces, while iron increases, the percentage of dihydrogen in the biogas, while cobalt has no influence.     

Cultivation of microalgae on liquid anaerobic digestate for depollution,biofuels and cosmetics: a review

Solid wastes from domestic, industrial and agricultural sectors cause acute economic and environmental problems. These issues can be partly solved by anaerobic digestion of wastes, yet this process is incomplete and generates abundant byproducts as digestate. Therefore, cultivating mixotrophic algae on anaerobic digestate appears as a promising solution for nutrient recovery, pollutant removal and biofuel production. Here we review mixotrophic algal cultivation on anaerobic waste digestate with focus on digestate types and characterization, issues of recycling digestate in agriculture, removal of contaminants, and production of biofuels such as biogas, bioethanol, biodiesel and dihydrogen. We also discuss applications in cosmetics and economical aspects. Mixotrophic algal cultivation completely removes ammonium, phosphorus, 17β-estradiol from diluted digestate, and removes 62% of zinc, 84% of manganese, 74% of cadmium and 99% of copper.

     

Influence of iron,nickel and cobalt on biogas production during the anaerobic fermentation of fresh residual biomass

We have investigated the dependence of the rate of the production of biogas upon the concentration of nickel, cobalt and iron at sub-toxic concentration and monitored its composition as amount of hydrogen, methane and carbon dioxide. The distribution of the added metals between the liquid and solid phase has also been monitored.

The results of our investigations show that the addition of any of the listed metals to the sludge may cause the production of a higher amount of biogas and influence the methane or carbon dioxide percentage. Conversely, the effect on the hydrogen production depends upon the metal added, the age of the active sludge used, and its adaptation to the susbtrate. As a general feature, during the acidogenesis phase, nickel reduces, while iron increases, the percentage of dihydrogen in the biogas, while cobalt has no influence.     

Extraction of arsenic species in soils using microwave-assisted extraction detected by ion chromatography coupled to inductively coupled plasma mass spectrometry

We have developed a novel microwave-assisted extraction method for determining the arsenic (As) speciation in soils that is based on extraction with phosphate solutions, including orthophosphoric acid, ammonium dihydrogen orthophosphate, and ammonium hydrogen orthophosphate. The highest extracting efficiency was obtained with 1 M ortho-phosphoric acid solution as the extractant, and this efficiency is associated with the pH of the extractant. Total As content and As species in the soil extracts were determined by inductively coupled plasma mass spectrometry (ICP-MS) alone and by the combined ion chromatography (IC) with ICP-MS, respectively. The proposed extraction procedure was applied to National Institute of Standards and Technology (NIST) standard reference material (SRM) 2711 (Montana soil) as well as to environmental soil samples collected from the agricultural lands of Bangladesh. As(V) was detected in all the soil samples, and As(III) was detected in nine soils of the 20. These results of extractable As testing indicate that the extraction of As species mainly depends on the composition of the soils. The As speciation results also indicate that As adsorption is highly dependent on the iron, aluminum, and manganese concentrations in the soil. The stability of As species in the extracts was also studied.     

Thermochemical conversion of municipal solid waste into energy and hydrogen: a review

The rising global population is inducing a fast increase in the amount of municipal waste and, in turn, issues of rising cost and environmental pollution. Therefore, alternative treatments such as waste-to-energy should be developed in the context of the circular economy. Here, we review the conversion of municipal solid waste into energy using thermochemical methods such as gasification, combustion, pyrolysis and torrefaction. Energy yield depends on operating conditions and feedstock composition. For instance, torrefaction of municipal waste at 200 °C generates a heating value of 33.01 MJ/kg, while the co-pyrolysis of cereals and peanut waste yields a heating value of 31.44 MJ/kg at 540 °C. Gasification at 800 °C shows higher carbon conversion for plastics, of 94.48%, than for waste wood and grass pellets, of 70–75%. Integrating two or more thermochemical treatments is actually gaining high momentum due to higher energy yield. We also review reforming catalysts to enhance dihydrogen production, such as nickel on support materials such as CaTiO₃, SrTiO₃, BaTiO₃, Al₂O₃, TiO₃, MgO, ZrO₂. Techno-economic analysis, sensitivity analysis and life cycle assessment are discussed.

     

温度变化对磷在水稻土肥际微域中迁移和转化的影响

以湖北潜江水稻土为研究对象,研究了温度变化对所施磷肥在水稻土肥际微域迁移转化的影响。实验采用室内土柱培养法,将磷酸二氢铵单施或与草酸配施后置于5℃、20℃和35℃的温度条件下,分别培养60 d或120 d后,对水稻土肥际微域内水溶性磷、有效磷及酸溶性磷的含量和分布进行了研究。结果表明：不同形态磷在水稻土肥际微域中的迁移距离均较短,单施磷酸二氢铵在5℃和20℃下肥际微域中不同形态磷迁移距离相近,均为50 mm左右,培养时间延长对迁移距离无显著影响,但在这两种培养温度下配施草酸时随着培养时间的延长,磷的迁移距离有所增加。当温度进一步升高至35℃时,配施草酸与否磷的迁移距离均比中低温条件下迁移距离减小,仅为42.5 mm左右。肥际微域中水溶性磷、有效磷和酸溶性磷含量均随着距施肥点距离的增加而显著降低。随着培养温度的升高,肥际微域水溶性磷和有效磷含量和累积量逐渐减少,但酸溶性磷含量基本呈增加趋势。同一温度下,随培养时间延长,各形态磷含量和累积量也逐渐减少。不同温度下配施草酸均能增加肥际微域内水溶性磷和有效磷的累积量。但是随着温度升高,配施草酸与否施磷后肥际微域水溶性磷和有效磷含量和累积量均有显著下降,表明温度升高施入土壤的磷的有效性下降,配施草酸对于减缓升温对磷的固定没有明显影响,但是同一温度下配施草酸可以增加肥际微域水溶性磷和有效磷的含量和累积量。肥际微域可以作为研究磷肥施入土壤后迁移转化及有效性变化的窗口,但是肥际微域中磷的变化对土体磷植物有效性的影响程度还需要进一步通过小区或大田试验进行研究。     

Applications of chitosan in food,pharmaceuticals, medicine,cosmetics, agriculture,textiles, pulp and paper,biotechnology, and environmental chemistry

Environmental Chemistry Letters - Chitosan is a biopolymer obtained from chitin, one of the most abundant and renewable materials on Earth. Chitin is a primary component of cell walls in fungi, the...     

Seaweed for climate mitigation,wastewater treatment,bioenergy, bioplastic,biochar, food,pharmaceuticals, and cosmetics: a review

The development and recycling of biomass production can partly solve issues of energy, climate change, population growth, food and feed shortages, and environmental pollution. For instance, the use of seaweeds as feedstocks can reduce our reliance on fossil fuel resources, ensure the synthesis of cost-effective and eco-friendly products and biofuels, and develop sustainable biorefinery processes. Nonetheless, seaweeds use in several biorefineries is still in the infancy stage compared to terrestrial plants-based lignocellulosic biomass. Therefore, here we review seaweed biorefineries with focus on seaweed production, economical benefits, and seaweed use as feedstock for anaerobic digestion, biochar, bioplastics, crop health, food, livestock feed, pharmaceuticals and cosmetics. Globally, seaweeds could sequester between 61 and 268 megatonnes of carbon per year, with an average of 173 megatonnes. Nearly 90% of carbon is sequestered by exporting biomass to deep water, while the remaining 10% is buried in coastal sediments. 500 gigatonnes of seaweeds could replace nearly 40% of the current soy protein production. Seaweeds contain valuable bioactive molecules that could be applied as antimicrobial, antioxidant, antiviral, antifungal, anticancer, contraceptive, anti-inflammatory, anti-coagulants, and in other cosmetics and skincare products.

     

Lead,cadmium, copper,zinc, iron,and calcium in human hair as a function of gender,age, smoking,and hair dyeing

Hair samples were collected randomly from 110 subjects (55 male and 55 female) ranging in age from (<15–60) years. Each subject was asked to complete a personal questionnaire describing his/her sex, age, general health, smoking, use of hair dyes, occupational area, and living habits. Concentrations of Pb, Cd, Cu, Zn, Fe, and Ca in human hair samples were evaluated using atomic absorption spectrometry. Results indicated that concentrations of Pb, Cd, Cu, and Zn in the hair of smokers were higher than those in the hair of non-smokers, whereas, Fe and Ca concentrations in hair of smokers were lower than those in hair of non-smokers. Moreover, the concentrations of these elements are higher in dyed hair compared with undyed hair.     

Concentrations of V,Cr, Mn,Fe, Ni,Co, Cu,Zn, As and Cd in mesopelagic crustaceans from the North East Atlantic Ocean

Specimens of oceanic decapods, mysids and euphausiids, collected from the North East Atlantic Ocean during July 1985, were analysed for V, Cr, Mn, Fe, Ni, Co, Cu, Zn, As and Cd. Measurement of the metals was carried out using two techniques: inductively-coupled plasma-source mass spectrometry (ICP-MS) and atomic absorption (AAS). With the exception of the iron data, good agreement was observed between the data from the two techniques. Baseline-metal data are presented for the species measured, along with any effects of animal size on metal concentration. The data presented for oceanic animals from different trophic levels are important in studies of metal fluxes and for the assessment of markers within the food web in the oceans.     

Metal passivity as mechanism of metal carcinogenesis: Chromium,nickel, iron,copper, cobalt,platinum, molybdenum

For the transition metals chromium, nickel, iron, copper, cobalt, platinum, and molybdenum, mechanisms of stable bonding in biochemistry (emphasis on carcinogenic mechanisms), chemistry, industrial chemistry, as well as epidemiological, occupational, orthopedic (implant devices) effects related to carcinogenesis, were reviewed. Hypothetically, the propensity to stable bonding (inertness), which ensures the metals’ performance capacity for consumers and industrial application, relates to their carcinogenicity. For chromium, a relationship between industrial/chemical and biological reactivity was noted for the tendency of Cr(III) ions to cause hydrolysis previous to stable bonding, as occurs during anodic passivation, leather tanning, and as indicated in biochemical studies pertaining to a mechanism of DNA condensation, which was suggested as a carcinogenic mechanism. The involvement of metal hydrolysis in both anodic passivation and biochemistry was noted also for nickel, iron, and platinum; the DNA interaction of platinum (cis-platin) is known to depend on hydrolysis. For nickel, issues of potential (V) were found important in both passivation and carcinogenicity. Comparably, the passivity behavior of cobalt and copper was found atypical, and their carcinogenicity yet unclear. Molybdenum, contained in passivated metallic implants, may relate to implant-associated carcinogenesis. Occupational carcinogenic effects were indicated for chromium, nickel, iron, and cobalt as caused by both reactive and passivated metal species. Exposure to acids and chronic respiratory irritation/infection/inflammation in workers were important cofactors in metal carcinogenesis. For wood and leather workers exposed to dust, the assumed presence in dust of metal particles abraded from alloys (sawing or cutting blades) may be a carcinogenic exposure hazard.     

Fragmentation of Phragmites Habitats, Minimum Viable Population Size, Habitat Suitability, and Local Extinction of Moths, Midges, Flies, Aphids, and Birds

Results from populations of insects and birds inhabiting Phragmites habitats were used to analyze effects of fragmentation. Flush-crash cycles of the stem-boring moth Archanara geminipuncta (Lepidoptera, Noctuidae) showed regionally concurrent, local extinctions despite an originally enormous population size (more than 180,000 adults), emphasizing the importance of metapopulation dynamics. Further, A. geminipuncta could be considered a keystone species, since shoot damage facilitated more than twenty species of herbivores, saprovores (of the caterpillars' feces), and their parasitoids. The gall midge Lasioptera arundinis could survive only in side shoots induced by shoot damage of A. geminipuncta .
Small Phragmites stands had thinner shoots (due to a water or nutrient deficiency) and shoots with more leaves (due to a better light supply) than large stands, thereby influencing species-specific demands for habitat suitability and nutritiousness of reed tissue. In other words significance of habitat fragmentation could not be assessed by area alone. For example, two chloropid flies depending on thin, yellowish shoots survived only in small habitats or in the unmown edges of large habitats.
Local persistence of Phragmites herbivores depended on much larger population sizes than could be expected from a population size sufficient to maintain genetic variation. At least 11,000 adults of the gall midge Giraudiella inclusa (or more than 84,000 galls) were necessary to avoid local extinction.
With regard to conservation management of reed habitats, nature reserves should consist of old and unmown reeds, have fewer disturbed (particularly, fewer mown) habitat edges, measure more than two hectares (priority should go to the largest remaining fragments), and be surrounded by nearby reed habitats providing reservoir populations and diverse shoot types.     

Research progress on distribution,sources, identification,toxicity, and biodegradation of microplastics in the ocean,freshwater, and soil environment

• Microplastics are widely found in both aquatic and terrestrial environments. • Cleaning products and discarded plastic waste are primary sources of microplastics. • Microplastics have apparent toxic effects on the growth of fish and soil plants. • Multiple strains of biodegradable microplastics have been isolated. Microplastics (MPs) are distributed in the oceans, freshwater, and soil environment and have become major pollutants. MPs are generally referred to as plastic particles less than 5 mm in diameter. They consist of primary microplastics synthesized in microscopic size manufactured production and secondary microplastics generated by physical and environmental degradation. Plastic particles are long-lived pollutants that are highly resistant to environmental degradation. In this review, the distribution and possible sources of MPs in aquatic and terrestrial environments are described. Moreover, the adverse effects of MPs on natural creatures due to ingestion have been discussed. We also have summarized identification methods based on MPs particle size and chemical bond. To control the pollution of MPs, the biodegradation of MPs under the action of different microbes has also been reviewed in this work. This review will contribute to a better understanding of MPs pollution in the environment, as well as their identification, toxicity, and biodegradation in the ocean, freshwater, and soil, and the assessment and control of microplastics exposure.