Kinetics of selective catalytic reduction of NO by NH3 on Fe-Mo/ZSM-5 catalyst

The catalyst of Fe-Mo/ZSM-5 has been found to be more active than Fe-ZSM-5 and Mo/ZSM-5 separately for selective catalytic reduction (SCR) of nitric oxide (NO) with NH3. The kinetics of the SCR reaction in the presence of O2 was studied in this work. The results show that the observed reaction orders were 0.74-0.99, 0.01-0.13, and 0 for NO, O2 and NH3, respectively, at 350-450℃. And the apparent activation energy of the SCR was 65 kJ/mol on the Fe-Mo/ZSM-5 catalyst. The SCR mechanism was also deduced. Adsorbed NO species can react directly with adsorbed ammonia species on the active sites to form N2 and H2O. Gaseous O2 might serve as a reoxidizing agent for the active sites that have undergone reduction in the SCR process. It is also important to note that a certain amount of NO was decomposed directly over the Fe-Mo/ZSM-5 catalyst in the absence of NH3.     

以MnOx/TiO2作为催化剂的低温SCR反应过程中还原剂NH3的作用

研究了在以MnOx/TiO2作为催化剂的低温SCR反应过程中,还原剂NH3所起的作用.当系统中NH3浓度较低时,增加气相中NH3的浓度可以大幅度提高NO的去除率.但当系统中NH3浓度较高时,NO去除率基本不随NH3浓度变化而变化.并且瞬态研究中,NH3对NO去除率的影响较为复杂.为了探明NH3在SCR反应中的作用,用原位傅立叶红外检测了各个反应历程中NH3在催化剂表面形成的基团变化及其活性特征.结果表明,在SCR反应过程中,在催化剂表面形成的配位态的NH3是参与反应的主要物质.并且在催化剂表面,此种NH3会与NO生成的硝酸盐形成竞争吸附,当催化剂活性点首先被硝酸盐占领时,将会影响配位态NH3的生成,从而在一定程度上降低了NO的转化率.     

NH3-SCR performance and the resistance to SO2 for Nb doped vanadium based catalyst at low temperatures

Niobium oxide as the promoter was doped in the V/WTi catalyst for the selective catalytic reduction(SCR)of NO.The results showed that the addition of Nb_2O_5could improve the SCR activity at low temperatures and the 6 wt.%additive was an appropriate dosage.The enhanced reaction activity of adsorbed ammonia species and the improved dispersion of vanadium oxide might be the reasons for the elevation of SCR activity at low temperatures.The resistances to SO_2of 3V6Nb/WTi catalyst at different temperatures were investigated.FTIR spectrum and TG-FTIR result indicated that the deposition of ammonium sulfate species was the main deactivation reason at low temperatures,which still exhibited the reactivity with NO above 200°C on the catalyst surface.There was a synergistic effect among NH_3,H_2O and SO_2that NH_3and H_2O both accelerated the catalyst deactivation in the presence of SO_2at 175°C.The thermal treatment at 400°C could regenerate the deactivated catalyst and get SCR activity recovered.The particle and monolith catalysts both kept stable NO_xconversion at 225°C with high concentration of H_2O and SO_2during the long time tests.     

Effect of TiO2 surface properties on the SCR activity of NOx emission abatement catalyst

NOx emission abatement catalysts V2O5 supported on various TiO2 including anatase, rutile and mixture of both were investigated with various physico-chemical measurements such as BET, NH3-TPD, NARP, XRD and so on, and the effect of TiO2 surface properties on the SCR (selective catalytic reduction) activity of V20s/TiO2 catalysts was studied. It was found that the TiO2 surface properties had strong affect on the SCR activity of V2Os/TiO2 catalysts. The stronger acidic property resulted in the higher exposure of active sites as well as the higher SCR activity.     

锰铈脱硝催化剂的制备及其再生性能研究

采用等体积浸渍法制备了一系列Mn-Ce-Ox复合氧化物脱硝催化剂用于NH3选择性催化还原(NH3-SCR)NO。考察了Mn/Ce摩尔比、焙烧温度、H2O和SO2对Mn-Ce-Ox复合氧化物脱硝催化剂活性的影响及催化剂中毒再生性能。结果表明:当NH3:NO=1:1,空速为5 000 h-1,550℃焙烧制得的Mn/Ce摩尔比为5∶1的Mn-Ce-Ox复合脱硝催化剂活性最佳,活性温度窗口为100~260℃,在此温度区间内催化剂活性大于90%。200℃时,Mn-Ce-Ox复合催化剂活性最高为97.84%;在10%(V/V)H2O蒸汽和300×10-6SO2共存条件下,200℃时,催化剂活性在开始反应2.5 h内迅速下降至53%左右,并在之后的6 h内没有明显变化;中毒催化剂经常温水洗再生处理、质量分数为3%的硝酸溶液再生处理和550℃焙烧2 h再生处理后200℃活性均能恢复到90%以上,其中中毒催化剂经质量分数为3%硝酸处理后活性恢复率最高。     

V2O5/TiO2催化剂脱除NO的研究

采用了等体积浸渍法制备二氧化钛负载钒氧化物催化剂（V2O5/TiO2）,研究了V2O5负载量、反应温度、烟气流量、氨氮比以及运行时间各因素对NH3选择性催化还原NO反应（SCR）效率的影响.研究结果表明：经过500℃温度下煅烧,烟气流量为200ml/min,负载量为7wt％的V2O5/TiO2催化剂,在400℃温度下反应,NO脱除率可达70.5％.     

V_2O_5/ACF低温选择性催化还原烟气中NO的研究

文章对V2O5/ACF(活性炭纤维)进行低温选择性催化还原(SCR)NO的影响研究。实验表明:ACF用硝酸处理形成ACFN,然后采用等体积浸渍法制备V2O5/ACFN催化剂,NO脱除率明显增加。同时研究了V2O5负载量、反应温度、NH3初始浓度、NO初始浓度、O2含量等因素对NO脱除效率的影响,发现V2O5/ACFN在180℃低温时,在NH3/NO为1.1、NO初始体积分数1000×10-6和O2体积分数5%时NO脱除效率较高。     

Performance and mechanism study for low-temperature SCR of NO with propylene in excess oxygen over Pt/TiO2 catalyst

A 0.5 wt.% Pt/TiO2 catalyst was prepared and used for the low-temperature selective catalytic reduction(SCR) of NO with C3 H6 in the presence of excess oxygen.The effects of Pt loading and O2 concentration on Pt/TiO2 catalytic performance for low-temperature SCR were investigated.It was found that optimal Pt loading was 0.5 wt.% and excess O2 favored low-temperature SCR of NOx.The mechanism of low-temperature SCR of NO with C3 H6 was investigated with respect to the behavior of adsorbed species over Pt/TiO2 at 150°C using in situ DRIFTS.The results indicated that surface nitrosyl species(Pt δ+-NO and Ti 3+-NO) and Pt 2+-CO are main reaction intermediates during the interactions of NO,C3 H6 and O2.A simplified NO decomposition mechanism for the low-temperature SCR of NO with C3 H6 was proposed.     

载体平衡离子对MnOx/ZSM-5催化NH3-SCR性能影响

采用不同平衡离子（H⁺、Na⁺和NH₄⁺）的ZSM-5改性分子筛制备MnO_x/ZSM-5催化剂,研究平衡离子对氨选择催化还原（NH₃-SCR）反应活性的影响.NH₃-SCR反应结果表明,NH₄-ZSM-5为载体时,催化剂表现出优异的低温SCR活性,而H-ZSM-5为载体的催化剂则在高温范围对NO_x具有较高的转化率.XRD、TEM、BET、Raman、H₂-TPR、XPS等表征结果显示,平衡离子可明显影响MnO_x在催化剂中的分散位置以及氧化还原性质.MZ-NH₄催化剂中活性组分MnO_x分散在载体外表面,颗粒尺寸较大,主要以Mn³⁺形式存在,对NO具有较强的氧化能力,进而促进“快速SCR”反应的进行.而H-ZSM-5为载体时,MnO_x主要被限域在载体孔道内形成限域催化剂,主要以Mn⁴⁺形式存在.活性研究和表征结果证明,活性组分分散在催化剂外表面,更有利于低温SCR反应的进行.     

低温磁性铁基SCR烟气脱硝的实验研究

在流化床反应器中,以磁性铁氧化物(Fe3O4、γ-Fe2O3)颗粒为床料,氨为还原剂,进行了中低温SCR烟气脱硝实验研究,然后对反应辅加磁场,初步研究磁场对磁性γ-Fe2O3催化剂SCR脱硝的影响,并对床料进行了XRD分析.结果表明,Fe3O4的SCR活性较差,γ-Fe2O3的SCR活性较佳,在250℃其催化脱硝效率能达到90%,但在250℃以上Fe2O3会对氨的氧化起作用,因而在250℃及以下的邻近温度区间是最佳催化温度区间.此外,在150~290℃,外加磁场能促进γ-Fe2O3对NO的吸附,提高脱硝效率,使250℃时的脱硝效率达到95%左右,但在290℃以上,则会降低脱硝效率.为了抑制氨的氧化,发挥磁场对γ-Fe2O3脱硝的作用,适合在200~250℃低温区间内采用γ-Fe2O3催化剂进行SCR脱硝.     

Mn/Fe-Mn改性HZSM-5在NH3-SCR中的催化性能

采用离子交换法制备了不同Mn含量及不同Fe/Mn物质的量比的HZSM-5改性分子筛,并以NH3为还原剂,在体积空速为12000 h-1条件下,考察了上述催化剂选择性催化还原NO性能.同时,运用环境扫描电镜(ESEM)、比表面积(BET)和X-射线衍射(XRD)等方法对催化剂进行了表征.结果表明,改性催化剂中活性组分在载体表面呈高度分散形式,催化活性较高,复合改性较单独改性性能更为优越,适量Fe的加入提高了催化剂催化活性和稳定性;(0.25)Fe-Mn/HZSM-5(Fe/Mn物质的量比为0.25)的NO转化率于300℃时最高达到98%,在300～500℃范围内NO转化率均保持在90%以上.实验还研究了不同焙烧温度下制备的(0.25)Fe-Mn/HZSM-5对NO转化率的影响.结果表明,焙烧温度对催化剂的活性影响较大,550℃为最佳焙烧温度.     

Effect of Mo contents on properties of Mo/ZSM-5 zeolite catalyst for NOx reduction

Mo/ZSM-5 catalysts with different Mo content were prepared by impregnation method. The effect of Mo content on the property of Mo/ZSM-5 catalysts and their performance for selective catalytic reduction(SCR) of NO with ammonia was investigated by XRD, ICP,XPS and NO-TPD respectively. The results showed that the catalytic activity of Mo/ZSM-5 for SCR of NO is strongly influenced by the Mo loading in HZSM-5 zeolites. The NOx conversion reached the highest value of 64.2% at 375℃ when Mo content is about 10.9%, and the temperatures at which the maximum of NOx conversion obtained were declined with the increase of Mo content. From XRD results, it can be seen that it exhibits the distinct interaction between Mo and HZSM-5 when Mo content is about 10.9%. This may result in a suitable phase structure in Mo/ZSM-5 catalyst, which is advantageous for NO reduction. XPS and NO-TPD results also showed that the catalytic activity of Mo/ZSM-5 may be related to the Mo percent on the surface.     

Effects of support acidity on the reaction mechanisms of selective catalytic reduction of NO by CH4 in excess oxygen

The reaction mechanisms of selective catalytic reduction (SCR) of nitric oxide (NO) by methane (CH₄) over solid superacid-based catalysts were proposed and testified by DRIFTS studies on transient reaction as well as by kinetic models. Catalysts derived from different supports would lead to different reaction pathways, and the acidity of solid superacid played an important role in determining the reaction mechanisms and the catalytic activities. Higher ratios of Br?nsted acid sites to Lewis acid sites would lead to stronger oxidation of methane and then could facilitate the step of methane activation. Strong Br?nsted acid sites would not necessarily lead to better catalytic performance, however, since the active surface NO_y species and the corresponding reaction routes were determined by the overall acidity strength of the support. The reaction routes where NO₂ moiety was engaged as an important intermediate involved moderate oxidation of methane, the rate of which could determine the overall activity. The reaction involving NO moiety was likely to be determined by the step of reduction of NO. Therefore, to enhance the SCR activity of solid superacid catalysts, reactions between appropriate couples of active NO_y species and activated hydrocarbon intermediates should be realized by modification of the support acidity.     

尖晶石型MnCo_2O_4催化剂的制备及SCR性能研究

用柠檬酸配位燃烧法制备了尖晶石复合金属氧化物MnCo2O4,使用X射线衍射仪、傅立叶红外分析仪对其进行了表征,并进一步在固定床反应器中考查了该催化剂的催化氧化、还原NO的性能以及SO2的影响。结果表明,所制备的MnCo2O4催化剂呈现典型的尖晶石结构,在300℃,空速20000h-1时,NO氧化率可以达到30%,而NH3催化还原NO的效率可达99.5%,但SO2对其还原性能有明显影响。     

Simultaneous removal of NO and dichloromethane（CH2Cl2） over Nb-loaded cerium nanotubes catalyst

Herein, a series of niobium oxide supported cerium nanotubes（Ce NTs） catalysts with different loading amount of Nb₂O₅（0–10 wt.%） were prepared and used for selective catalytic reduction of NOxwith NH₃（NH₃-SCR） in the presence of CH₂Cl₂. Commercial V₂O₅-WO₃-TiO₂ catalyst was also prepared for comparison. The physcial properties and chemical properties of the Nb₂O₅ lo...     

Mn-CeOx/Ti-PILCs for selective catalytic reduction of NO with NH3 at low temperature

Titanium-pillared clays (Ti-PILCs) were obtained by different ways from TiCl₄, Ti(OC₃H₇)₄ and TiOSO₄, respectively. Mn-CeO_x/Ti-PILCs were then prepared and their activities of selective catalytic reduction (SCR) of NO with NH₃ at low-temperature were evaluated. Mn-CeO_x/Ti-PILCs were characterized by X-ray diffraction, N₂ adsorption, Fourier transform infrared spectroscopy, thermal analysis, temperature-programmed desorption of ammonia and H₂-temperature-programmed reduction. It was found that Ti-pillar tend to be helpful for the enlargement of surface area, pore volume, acidity and the enhancement of thermal stability for Mn-CeO_x/Ti-PILCs. Mn-CeO_x/Ti-PILCs catalysts were active for the SCR of NO. Among three resultant Mn-CeO_x/Ti-PILCs, the catalyst from TiOSO₄ showed the highest activity with 98% NO conversion at 220℃, it also exhibited good resistance to H₂O and SO₂ in flue gas. The catalyst from TiCl₄ exhibited the lowest activity due to the unsuccessful pillaring process.     

Iron-doped Mn-Ce/TiO2 catalyst for low temperature selective catalytic reduction of NO with NH3

The catalysts of iron-doped Mn-Ce/TiO 2(Fe-Mn-Ce/TiO 2) prepared by sol-gel method were investigated for low temperature selective catalytic reduction(SCR) of NO with NH 3.It was found that the NO conversion over Fe-Mn-Ce/TiO 2 was obviously improved after iron doping compared with that over Mn-Ce/TiO 2.Fe-Mn-Ce/TiO 2 with the molar ratio of Fe/Ti = 0.1 exhibited the highest activity.The results showed that 96.8% NO conversion was obtained over Fe(0.1)-Mn-Ce/TiO 2 at 180°C at a space velocity of 50,000 hr 1.Fe-Mn-Ce/TiO 2 exhibited much higher resistance to H 2 O and SO 2 than that of Mn-Ce/TiO 2.The properties of the catalysts were characterized using X-ray diffraction(XRD),N 2 adsorption,temperature programmed desorption(NH 3-TPD and NOx-TPD),and Xray photoelectron spectroscopy(XPS) techniques.BET,NH3-TPD and NOx-TPD results showed that the specific surface area and NH3 and NOx adsorption capacity of the catalysts increased with iron doping.It was known from XPS analysis that iron valence state on the surface of the catalysts were in Fe3+ state.The doping of iron enhanced the dispersion and oxidation state of Mn and Ce on the surface of the catalysts.The oxygen concentrations on the surface of the catalysts were found to increase after iron doping.Fe-Mn-Ce/TiO2 represented a promising catalyst for low temperature SCR of NO with NH3 in the presence of H2 O and SO2.     

Mn/TiO2和Mn-Ce/TiO2低温脱硝催化剂的抗硫性研究

在低温选择性催化还原(SCR)反应条件下考察了烟气残余SO2对Mn/TiO2和Mn-Ce/TiO2催化剂选择性催化还原活性的影响,同时对SO2的影响机理进行了探讨.结果发现,Mn/TiO2催化剂在SO2反应气氛中失活很快,硫铵盐的沉积和活性组分的硫酸化是催化剂失活的重要原因;Ce的加入可以有效地抑制催化剂活性组分的硫酸化,同时还能降低硫酸盐在催化剂表面的稳定性,从而可以提高催化剂的抗硫性.     

以飞灰为载体的金属氧化物催化剂脱硝研究

以飞灰作为催化剂的载体 ,担载Fe、Cu、V、Ni等过渡金属作为活性成分制成脱硝催化剂 .对飞灰作为载体的催化剂进行了各种表征分析 ,考察了催化剂的制备条件对脱硝效率的影响 .利用固定床反应装置进行了催化脱硝实验研究 ,结果发现 ,飞灰作为脱硝催化剂的载体是可行的 ,其中担载Cu作为活性成分时脱硝效率最好 ,在温度为 2 70℃时NO的转化率达90 %以上 .最后 ,对活性炭和页岩灰作载体时的催化脱硝特性进行了对比研究 ,发现飞灰的催化活性仅次于活性炭 ,而页岩灰的活性最差 .     

V-W/TiO_2/γ-Al_2O_3催化剂催化还原NO的研究

掺杂15%TiO2对γ-Al2O3改性制备了TiO2/γ-Al2O3复合氧化物载体,以此复合氧化物及TiO2、γ-Al2O3为载体用浸渍法负载钒钨制备了一系列催化剂,采用比表面积和孔结构分析、X射线衍射(XRD)、高分辨电镜(HRTEM)、原位红外(in situ FT-IR)等技术对载体和催化剂进行宏观-微观表征,同时在模拟氨气选择性催化还原NO(NH3-SCR)的反应条件下对催化剂的脱硝反应活性进行考察,比较研究TiO2掺杂对V2O5-WO3/TiO2和V2O5-WO3/γ-Al2O3催化剂的改性作用。结果发现,少量TiO2掺杂制得的TiO2/γ-Al2O3复合载体中,TiO2和γ-Al2O3之间的协同作用使得V2O5-WO3/TiO2/γ-Al2O3催化剂的选择性催化还原脱硝效率及活性窗口明显优于单一载体制备的催化剂,并表现出了良好的热稳定性;各种表征结果表明,TiO2/γ-Al2O3复合载体中TiO2高度分散在γ-Al2O3上,复合载体具有较大的比表面积,载体表面存在大量的Br?nsted酸位和较多的活性中间产物,这些可能是TiO2/γ-Al2O3复合载体催化剂具有较好SCR活性的原因。