The Spatial and Temporal Variation of Measured Urban PM10 and PM2.5 in the Helsinki Metropolitan Area

We have studied particulate matter (PM) concentrations,PM₁₀ and PM_2.5, measured in an urban air qualitymonitoring network in the Helsinki Metropolitan Area during1997–1999. The data includes PM₁₀ concentrationsmeasured at five locations (two urban traffic, one suburbantraffic, one urban background and one regional backgroundsite) and PM_2.5 concentrations measured at twolocations (urban traffic and urban background sites). Theconcentrations of PM₁₀ show a clear diurnal variation,as well as a spatial variation within the area. Bycontrast, both the spatial and temporal variation of thePM_2.5 concentrations was moderate. We have analysedthe evolution of urban PM concentrations in terms of therelevant meteorological parameters in the course of oneselected peak pollution episode during 21–31 March, 1998.The meteorological variables considered included wind speedand direction, ambient temperature, precipitation, relativehumidity, atmospheric pressure at the ground level,atmospheric stability and mixing height. The elevated PMconcentrations during the 1998 March episode were clearlyrelated to conditions of high atmospheric pressure,relatively low ambient temperatures and low wind speeds inpredominantly stable atmospheric conditions. The resultsprovide indirect evidence indicating that the PM₁₀concentrations originate mainly from local vehiculartraffic (direct emissions and resuspension), while thePM_2.5 concentrations are mostly of regionally andlong-range transported origin.     

Air Quality Management in Izmir Region of Turkey as Required by Clean Air Plans

As a first step to work out an abatement plan against air pollution, a local emission inventory with 1 hr temporal and 1 km spatial resolution in the city of Izmir and its surroundings was prepared. The study area consisted of a 200 × 170 km² rectangle having the city of Izmir at the centre. The studied pollutants were total particulate matter (PM), sulfur oxides (SO_x), nitrogen oxides (NO_x), volatile organic compounds (VOC) and carbon monoxide (CO). Emissions of these pollutants were determined by estimation methods making use of suitable emission factors. Emission sources were evaluated in three categories; point, area and line sources. For year 2000 total emissions in the study area on an average day were estimated as 173 tons PM, 299 tons SOx, 136 tons NOx, 68 tons VOC and 320 tons CO. At the second part of the study, calculated emissions were transformed into air quality predictions in the area by using the Industrial Source Complex – Short Term (ISCST3) dispersion model. Model results were tested with monitoring data from urban air quality stations obtained during the year 2000. Results of the past, present and future air quality estimates in the region were discussed. In order to do so, future scenarios including various control technology applications were formulated and tested to see their effect on the future air quality.     

Measurements of particulate matter concentrations at a landfill site (Crete,Greece)

Large amounts of solid waste are disposed in landfills and the potential of particulate matter (PM) emissions into the atmosphere is significant. Particulate matter emissions in landfills are the result of resuspension from the disposed waste and other activities such as mechanical recycling and composting, waste unloading and sorting, the process of coating residues and waste transport by trucks. Measurements of ambient levels of inhalable particulate matter (PM₁₀) were performed in a landfill site located at Chania (Crete, Greece). Elevated PM₁₀ concentrations were measured in the landfill site during several landfill operations. It was observed that the meteorological conditions (mainly wind velocity and temperature) influence considerably the PM₁₀ concentrations. Comparison between the PM₁₀ concentrations at the landfill and at a PM₁₀ background site indicates the influence of the landfill activities on local concentrations at the landfill. No correlation was observed between the measurements at the landfill and the background sites. Finally, specific preventing measures are proposed to control the PM concentrations in landfills.     

Comparison of PM2.5 and PM10 in A Suburban Area in Korea During April, 2003

Airborne particulate matter (PM) concentrations were measured in Iksan, a suburban area in South Korea during April, 2003. PM_2.5 (particles with an aerodynamic diameter less than 2.5 μm) and PM₁₀ (particles with an aerodynamic diameter less than 10 μm) samples were collected, and the chemical characteristics of particles were examined for diurnal patterns, yellow dust/rainfall influences, and scavenging effects. Average concentrations of PM_2.5 and PM₁₀ mass measured were 37.3 ± 16.2 μg m⁻³ and 60.8 ± 29.5 μg m⁻³, respectively. The sum of ionic chemical species concentrations for PM_2.5 and PM₁₀ was 16.9 ± 7.3 and 23.1 ± 10.1 μg/m³, respectively. A significant reduction in PM mass concentrations during rainfall days was observed for coarse mode (PM_{2.5 − 10}) particles, but less reduction was found for fine (PM_2.5) mass concentration. SO₄ ²⁻, NH₄ ⁺, and K⁺ predominated in fine particulate mode, NO₃ ⁻ and Cl⁻ predominated in fine particle mode and coarse particle mode, but Na⁺, Mg²⁺, and Ca²⁺ mostly existed in coarse mode. The high concentration of ammonium due to local emissions and long-range transport neutralized sulfate and nitrate to ammonium sulfate and ammonium nitrate, which were major forms of airborne PM in Iksan. Average mass concentrations of PM₁₀ in daytime and at night were 57.6 and 70.0 μg m⁻³, and those of PM_2.5 were 35.4 and 42.5 μg m⁻³, respectively. NO₃ ⁻ and Cl⁻ in both PM_2.5 and PM₁₀ were about double at night than in the daytime, while the rest of the chemical species were equal or a little higher at night than in the daytime. The results suggest the formation of ammonium nitrate and chloride when high ammonia concentration and low air temperature are allowed. Backward air trajectory analyses showed that air masses arriving at the site during yellow dust period were transported from arid Chinese regions, which resulted in high concentrations of airborne PM mass concentrations. In the meantime, air mass trajectories during a rainfall period were mostly from the Pacific Ocean or the East China Sea, along with a relatively low PM concentration.     

Effects of Duststorms on the Air Pollution in Beijing

The objective of this study was to investigate the air pollutionin Beijing before, during, and after duststorms occur. There aretwo different phenomena of air pollution in Beijing during a duststorm; one being related to the concentration of particulatematter and the second related to gaseous chemical pollutant concentrations. In this study, the concentrations of the chemicalpollutants, such as SO₂, NO_x and CO, were high prior to the occurrence of the duststorms. At the beginning of the two duststorms studied, the air quality related to these chemicalconstituents was improved due to a strong wind blowing away the chemical pollutants, which caused a decrease in the concentrations of SO₂, CO and NO_x. During the duststorm, the concentration of particulate matter, quantified by PM₁₀, wasobserved to increase and the atmospheric visibility decreased.     

Modelling of Air Quality with CAMx: A Case Study in Switzerland

The three-dimensional Eulerian model CAMx (Comprehensive Air QualityModel with Extensions) was applied for the first time to simulate bothgaseous and particulate photochemical air pollution in Switzerland during July 28–30, 1993. The meteorological input data were prepared using the Systems Applications International Mesoscale Model (SAIMM). The CAMx model results were compared with the measurements carried out at ground level andfrom airborne measuring platforms within the frame of the Swiss POLLUMET research programme. In general, the CAMx performance for gaseous species wasfound to be better than that of the previously used Urban Airshed Model (UAM)and the Variable Grid Urban Airshed Model (UAM-V). The most significant improvement for the gaseous species is in the prediction of HNO₃ concentrations, due to the inclusion of aerosol chemistry. Aerosol species such as NO₃ ^-, NH₄ ⁺, SO₄ ^2-, and secondary organic aerosols were calculated in one particle size range (0.04–2.5 m) and compared with a few measurements available. Although July 29 was reasonably well simulated, overestimated wind speeds by SAIMM for July 30 caused a too fast transport of pollutants. Similarly to measurements, significant spatial correlation of the secondarily formed aerosols with ozone and formaldehyde is found in the afternoon.     

Health risk assessment of air emissions from a municipal solid waste incineration plant--a case study

A health risk assessment of long-term emissions of carcinogenic and non-carcinogenic air pollutants has been carried out for the municipal solid waste incinerator (MSWI) of the city of Taranto, Italy. Ground level air concentrations and soil deposition of carcinogenic (Polychlorinated Dibenzo-p-Dioxins/Furans and Cd) and non-carcinogenic (Pb and Hg) pollutants have been estimated using a well documented atmospheric dispersion model. Health risk values for air inhalation, dermal contact, soil and food ingestion have been calculated based on a combination of these concentrations and a matrix of environmental exposure factors. Exposure of the surrounding population has been addressed for different release scenarios based on four pollutants, four exposure pathways and two receptor groups (children and adults). Spatial risk distribution and cancer excess cases projected from plant emissions have been compared with background mortality records. Estimated results based on the MSWI emissions show: (1) individual risks well below maximum acceptable levels, (2) very small incremental cancer risk compared with background level.     

The effect of dust emissions from open storage piles to particle ambient concentration and human exposure

The current study focus on the determination of dust emissions from piles in open storage yards of a municipal solid waste (MSW) composting site and the subsequent atmospheric dust dispersion. The ISC3-ST (Industrial Source Complex Version 3 – Short Term) model was used for the evaluation of the PM₁₀ ambient concentrations associated with the dispersion of MSW compost dust emissions in air. Dust emission rates were calculated using the United States Environmental Protection Agency proposed dust resuspension formulation from open storage piles using local meteorological data. The dispersion modelling results on the spatial distribution of PM₁₀ source depletion showed that the maximum concentrations were observed at a distance 25–75 m downwind of the piles in the prevailing wind direction. Sensitivity calculations were performed also to reveal the effect of the compost pile height, the friction velocity and the receptor height on the ambient PM₁₀ concentration. It was observed that PM₁₀ concentrations (downwind in the prevailing wind direction) increased with increasing the friction velocity, increasing the pile height (for distances greater than 125 m from the source) and decreasing the receptor height (for distances greater than 125 m from the source). Furthermore, the results of ISC3-ST were analysed with the ExDoM (Exposure Dose Model) human exposure model. The ExDoM is a model for calculating the human exposure and the deposition dose, clearance, and finally retention of aerosol particles in the human respiratory tract (RT). PM₁₀ concentration at the composting site was calculated as the sum of the concentration from compost pile dust resuspension and the background concentration. It was found that the exposure to PM₁₀ and deposited lung dose for an adult Caucasian male who is not working at the composting site is less by 20–74% and 29–84%, respectively, compared to those for a worker exposed to PM concentrations at the composting site.     

Environmental assessment of solid waste systems and technologies: EASEWASTE.

A new model has been developed for evaluating the overall resource consumption and environmental impacts of municipal solid waste management systems by the use of life cycle assessment. The model is named EASEWASTE (Environmental Assessment of Solid Waste Systems and Technologies) and is able to compare different waste management strategies, waste treatment methods and waste process technologies. The potential environmental impacts can be traced back to the most important processes and waste fractions that contribute to the relevant impacts. A model like EASEWASTE can be used by waste planners to optimize current waste management systems with respect to environmental achievements and by authorities to set guidelines and regulations and to evaluate different strategies for handling of waste. The waste hierarchy has for decades been governing waste management but the ranking of handling approaches may not always be the most environmentally friendly. The EASEWASTE model can identify the most environmentally sustainable solution, which may differ among waste materials and regions and can add valuable information about environmental achievements from each process in a solid waste management system.     

Solubilization and methanogenesis of a particulate industrial waste: Impact of solids loading and temperature

Effective anaerobic treatment of particulate wastes requires solubilization and acid formation prior to methanogenesis. In this case study of a particulate waste from a corn-processing industry, the influence of solids loading in solubilization, acid formation and methanogenesis was studied under mesophilic (35°C) and thermophilic (60°C) conditions. The waste was concentrated by centrifugation to initial suspended solids concentrations (TSS_i) of 150 to 350 g/L (15% to 35%). Anaerobic batch tests were conducted for 20 days, and significant solubilization of the particulate organic matter occurred in all cases. The thermophilic systems were more effective than the mesophilic systems with respect to solubilization of particulates, volatile solids destruction, acetic acid uptake, and methane generation. Methanogenesis appreared to be a rate-limiting step at higher TSS_i values, indicated by accumulation of volatile organic acids in the batch systems. Slower rates of methane production led to identification of the limiting solids loading for both temperature regimes. The results of this study can be used to evaluate the limitations of a single stage system for anaerobic treatment of organic particulate industrial wastes.     

PM<Subscript>10</Subscript> and Ultrafine Particles Counts In-Vehicle and On-Road in the Athens Area

This work presents the first results of a study concerning on-road and in-vehicle exposure to particulate matter in the area of Athens. PM₁₀ concentration measurements were conducted by TSI DustTrak, while driving along routes with different characteristics of traffic density, during September 2003–March 2004. Concurrent measurements of the ultrafine particles (UFPs) number concentration were also conducted, by condensation particle counter during part of the days. Pedestrian exposure to PM₁₀ and UFPs was also studied through stationary measurements on the kerbside of selected roads on November 2003 and February 2004. A major avenue, a heavy-trafficked road across a children hospital and two central roads, one in a residential and one in a commercial area were selected for measurement. The results indicate that every day commuters are exposed to significant concentration levels. Higher exposures were observed in heavy-trafficked areas and during rush hours. Mean PM₁₀ in-vehicle and on-road concentrations ranged from 30–320 μg/m³ and 70–285 μg/m³, respectively. The ultrafine particles number concentrations were in the range of 5.0 × 10⁴–17.3 × 10⁴ particles/cm³ in-vehicle and 3.1 × 10⁴–7.3 × 10⁴ particles/cm³ on the kerbside of a central residential road. Both PM₁₀ and UFPs concentrations presented repeated short-term peak exposures. The results clearly point out the importance of the road microenvironment (in-vehicle and on kerbside) for population exposure in urban areas.     

Atmospheric Levels of Nitrogen Oxides at a Greek Oil Refinery Compared with the Urban Measurements in Athens

Oil refining is among the industrial activities that emit considerable amounts of air pollutants into the atmosphere. Nitrogen oxides are important air pollutants that are emitted by oil refineries as products of combustion processes. The ambient air concentrations of nitrogen oxide (NO) and nitrogen dioxide (NO₂) were monitored continuously at a site close to an oil refinery, near the city of Corinth in Greece, during autumn 1997 together with the main meteorological parameters. The contribution of the oil refinery to the measured atmospheric levels of nitrogen oxides was estimated. The ambient air concentration of nitrogen oxides in the area surrounding the oil refinery were generally lower than the ambient air concentrations in the urban area of Athens in Greece, and the NO₂ levels were always below the existing air quality standards. The influence of the refinery emitted NO_x in the photochemical production of ozone seems to be more important in terms of human and vegetation exposure given the high ozone backgrounds measured in the area.     

Urban Metal Management The Example of Lead

The metal metabolism of an urban region, the City ofVienna, was investigated to discuss urban metal management strategies in view of environmental protection and resource conservation. About 90% of the metal stock is located in Vienna's buildings and infrastructure, whilst only 10% is in the landfills. The city stock represents a potential source for diffusive emissions. However, the control of the current environmental policy concentrates mainly on landfill emissions. Diffusive emissions resulting from the losses over the use of metal containing goods in the city are widely dispersed and cannot be easily controlled due to numerous non-point sources. First investigations indicate that for certain applications, the diffusive stock emissions are as significant as other sources. At present, Vienna's known diffusive and point source lead emissions into air and water are about 40 to 50 times higher than comparable past loadings from geogenic Vienna. Furthermore, a life cycle approach from acid car batteries indicates that sustainable lead management should consider flows and stocks in the hinterland of the city too. The city metal stock also represents a potential resource. Leaded water pipes built-in in Vienna's city stock have the potential to produce 1.6 million traditional car batteries. In future such city mining strategies can partly replace ore mining.     

Increase of Ozone Concentration in an Inland Basin During the Period of Nocturnal Thermal High

Since ground level ozone concentrations in the basin on one day before the occurrence of unusually high air temperature with nocturnal thermal high showed a typical urban type of a maximum ozone concentration at 1300 LST and a minimum at night. However, a maximum ozone concentration under extremely high air temperature of 39.2 °C was detected at 1700 LST or 1800 LST at two environmental monitoring sites, which was 4 or 5 hr delayed from the typical occurrence time, 1300 LST. Its maximum value showed about 50 or 70% increase of the concentration more than the typical maximum value and its concentration gradually decreased until 2100 LST. After 1200 LST until 1800 LST, air temperature was maintained over 35 °C and the high temperature made a great contribution to the increase of O₃ for several hours. The deviated occurrence time of a maximum ozone concentration is mainly attributed to meteorological and topographic effects – shifted occurrence time of maximum air temperature, shrunken atmospheric boundary layer depth and wind. While daytime O₃ concentration due to photochemical production of O₃ from NO₂ increased, NO₂ concentration decreased, with their reverse respondent patterns each night. A secondary maximum concentration of O₃ at 2300 LST or 2400 LST is due to a much shallower depth of nocturnal surface inversion layer with daytime producing more O₃ than that of the daytime convective boundary layer, resulting in the increase of ozone concentration, though the reduction of ozone occurred under the reversal process of O₃ into NO₂.     

Indoor Air Quality at Rural and Urban Sites in Pakistan

In the developing world, the vast majority of people rely on solid biomass fuels for cooking and heating which results in poor indoor air quality. The present study determined indoor air quality in some rural and urban areas of Pakistan. Measurements were made of particulate mass (PM10, PM2.5 and PM1), number concentration and bioaerosols in different micro environments. PM10 concentrations of up to 8,555 μg/m³ were observed inside the kitchens where biofuels were used as energy source. Cleaning and smoking was identified as a major source of indoor particulate pollution and concentrations of more than more than 2,000 μg/m³ were recorded in the living room during these activities. Indoor number concentrations in Lahore were typically greater than those observed outdoors in European cites. At a rural site the highest Colony Forming Units (CFUs) were in the 0.5 μm–2 μm size fraction, while at the urban location CFUs were dominant for 2 μm–16 μm. It was observed that CFUs(Colony Forming Units) counts were higher inside living rooms than kitchens. It is important to note that women and children were exposed to extremely high levels of particulates during cooking. Overall, indoor air quality in Pakistan was poor and there is a dire need to take a serious step to combat with it.     

Effect of mixing on NO removal in the selective noncatalytic reduction reaction process

The effect of mixing of NH₃ and NO on the selective noncatalytic reduction (SNCR) reaction was investigated using a bench-scale reactor. Three different experimental conditions were compared for the removal of NO in the bulk gas with NH₃, a reducing agent, by means of mixing and contacting. The temperature that gave the highest NO removal efficiency was about 800°C when NH₃ was injected with air or NH₃ was premixed and air was injected. It is suggested that control of mixing of the reducing agent and the injection conditions could be a good way to increase NO removal efficiency as well as to lower the reaction temperature. When NH₃ was injected with air, the NO removal efficiency increased with increasing injected air flow if the initial NO concentration was low, whereas for high NO concentrations, the NO removal efficiency slightly increased up to an injected air flow rate of 100 ml/min. A proposed mixed-flow model can be used as a prediction tool for the NO removal efficiency covering various conditions of the real SNCR process.     

Nitrous Oxide Concentrations in the Soil of a Mown Grassland: Comparison of Model Results with Soil Profile Measurements

Nitrous oxide (N₂O) concentrations in the soilprofile of a fertilized grassland on the Swiss plateauwere measured at irregular intervals during one year.Air samples were taken from air-permeable tubesinstalled at depths between 2 and 100 cm belowthe surface. Highest concentrations in thetopsoil were observed following precipitationafter fertilization. In the subsoil,concentrations were highest when the soil watercontent fell below about 92% after a wet periodand mineral nitrogen was available from priorfertilization. N₂O concentrations in thetopsoil were simulated with the process-basedgrassland ecosystem model PaSim 2.5 (PastureSimulation Model) and compared with measured soilN₂O concentrations. The model simulated wellthe concentration peaks after fertilizeradditions and the concentrations in winter. Butthe simulated baseline concentrations during thegrowing season were overestimated. Possiblecauses for this discrepancy are discussed andsuggestions are made to improve the model.     

Concentrations and Pools of Heavy Metals in Urban Soils in Stockholm,Sweden

The concentrations of heavy metals (Cd, Cr, Cu, Hg, Ni, Pb andZn) and arsenic (As) were surveyed and the metal pools estimatedin soils in Stockholm Municipality. The sampling sites were distributed all over the entire municipality with a higher sampling density in the city centre. Soils were sampled to a maximum depth of 25 to 60 cm. Soil texture, total-C content, electrical conductivity and pH were analysed. Heavy metal concentrations were determined after wet digestion with boiling7 M HNO₃.The results showed a wide range in heavy metal concentrations, as well as in other soil properties. The city centre soils constituted a rather homogeneous group whereas outside this areano geographical zones could be distinguished. These soils were grouped based on present land use, i.e. undisturbed soils, public parks, wasteland (mainly former industrial areas), and roadside soils. The city centre and wasteland soils generally hadenhanced heavy metal concentrations to at least 30 cm depth compared to park soils outside the city centre and rural (arable)soils in the region, which were used to estimate background levels. For example, the mean Hg concentration was 0.9 (max 3.3)mg kg^-1 soil at 0–5 cm and 1.0 (max 2.9) at 30 cm depth in the city centre soils, while the background level was 0,04 mg kg^-1. Corresponding values for Pb were 104 (max 444) and135 (max 339) mg kg^-1, at 0–5 and 30 cm, respectively, while the background level was 17 mg kg^-1.The average soil pools (0–30 cm depth) of Cu, Pb and Zn were 21,38 and 58 g m^-2 respectively, which for Pb was 3–4 timeshigher and for Cu and Zn 1.5–2 times higher than the backgroundlevel. The total amount of accumulated metals (down to 30 cm)in the city centre soils (4.5^*10 ⁶ m² public gardens and green areas) was estimated at 80, 1.1, 120 and 40 t for Cu, Hg, Pb and Zn, respectively. The study showed (1) thatfrom a metal contamination point of view, more homogeneous soilgroups were obtained based on present land use than on geographicdistance to the city centre, (2) the importance of establishing a background level in order to quantify the degree of contamination, and (3) soil samples has to be taken below the surface layer (and deeper than 30 cm) in order to quantify theaccumulated metal pools in urban soils.     

Characteristics of air pollution in Beijing during sand-dust storm periods

In the Beijing area, March and April have the highest frequency of sand-dust weather. Floating dust, blowing sand, and dust storms, primarily from Mongolia, account for 71%, 20%, and 9% of sand-dust weather, respectively. Ambient air monitoring and analysis of recent meteorological data from Beijing sand-dust storm periods revealed that PM₁₀ mass concentrations during dust storm events remained at 1500 μg m⁻³, which is five to ten times higher than during non-dust storm periods, for fourteen hours on both April 6 and 25, 2000. During the same period, the concentrations in urban areas were comparable to those in suburban areas, while the concentrations of gaseous pollutants, such as SO₂, NO _x , NO₂, and O₃, remained at low levels, owing to strong winds. Furthermore, during sand-dust storm periods, aerosols were created that consisted not only of many coarse particles, but also of a large quantity of fine particles. The PM_2.5 concentration was approximately 230 μg m⁻³, accounting for 28% of the total PM₁₀ mass concentration. Crustal elements accounted for 60–70% of the chemical composition of PM_2.5, and sulfate and nitrate for much less, unlike the chemical composition of PM_2.5 on pollution days, which was primarily composed of sulfates, nitrates, and organic material. Although the very large particle specific surface area provided by dust storms would normally be conducive to heterogeneous reactions, the conversion rate from SO₂ to SO₄ ²⁻ was very low, because the relative humidity, less than 30%, was not high enough.