垃圾填埋场渗滤液回流技术研究进展

垃圾填埋场渗滤液回流能有效降低渗滤液中污染物的浓度，提高填埋场稳定化程度，具有广泛的应用前景。本文综述了国内外学者对该技术的研究情况，包括技术特点及相关机理、渗滤液特性研究及回流效果的影响因素，指出了该技术现存的不足之处和尚待解决的理论和技术问题。     

Determining the socially optimal recycling rate

What municipal recycling rate is socially optimal? One credible answer would consider the recycling rate that minimizes the overall social costs of managing municipal waste. Such social costs are comprised of all budgetary costs and revenues associated with operating municipal waste and recycling programs, all costs to recycling households associated with preparing and storing recyclable materials for collection, all external disposal costs associated with waste disposed at landfills or incinerators, and all external benefits associated with the provision of recycled materials that foster environmentally efficient production processes. This paper discusses how to estimate these four components of social cost to then estimate the optimal recycling rate.     

Management of old landfills by utilizing forest and energy industry waste flows

The lack of landfill capacity, forthcoming EU waste disposal and landfill management legislation and the use of non-renewable and energy intensive natural resources for the end-treatment of old landfills increase pressures to develop new landfill management methods. This paper considers a method for the end-management of old landfills in Finland, which is based on the utilization of forest and paper industry waste flows, wastes from paper recycling (de-inking) and wastes from forest industry energy production. Fibre clay wastes from paper mills, de-inking sludges from de-inking of recovered waste paper and incineration ash from forest industry power plants serve to substitute the use of natural clay for the building of landfill structures for closed landfills. Arguably, this method is preferable to existing practices of natural clay use for landfill building, because it (1) substitutes non-renewable natural clay, (2) consumes less energy and generates less CO2 emissions than the use of natural clay, and (3) eliminates considerable amounts of wastes from paper production, paper consumption and from forest industry energy production. Some difficulties in the application of the method are considered and the waste flow utilization is incorporated into a local forest industry recycling network.     

The role of perceived effectiveness of policy measures in predicting recycling behaviour in Hong Kong

Hong Kong is a compact and ‘land-hungry’ city where recycling has become an important measure for treating waste and reducing the demand on the limited landfills. The objectives of this paper are to extend the model of recycling attitude and behaviour to explain the relationship between perceived policy effectiveness and recycling behaviour. Previous studies on recycling attitude and behaviour had widely adopted the theory of planned behaviour (TPB) and the norm activation model (NAM), and drawn policy implications from them. Nevertheless, little research has been conducted to investigate the role of perceived effectiveness of policy measures in predicting recycling behaviour. To address this, a model that integrates the TPB and NAM was proposed in this study, and a street survey was conducted to investigate the case. The results illustrate that recycling intention is influenced by subjective norms, perceived behavioural control, moral norms, and awareness of consequences, as well as a newly proposed construct, namely perceived policy effectiveness. The study proved self-reported recycling behaviour (direct behaviour) and support for policy measures (indirect behaviour) are influenced by recycling intention. All in all the Government should provide more recycling bins, guidelines on recycling activities, and should accent what it has been doing to facilitate and encourage recycling.     

Environmental and economic impact assessment of construction and demolition waste disposal using system dynamics

Construction and demolition wastes (CDW) have increasingly serious problems in environmental, social, and economic realms. There is no coherent framework for utilization of these wastes which are disposed both legally and illegally. This harms the environment, contributes to the increase of energy consumption, and depletes finite landfills resources. The aim of this paper is to evaluate the impacts of two alternatives for the management of CDW, recycling and disposing. The evaluation is carried out through developing a dynamic model with aid STELLA software by conducting the following steps: (1) quantifying the total cost incurred to mitigate the impacts of CDW landfills and uncollected waste on the environment and human health; (2) quantifying the total avoided emissions and saved energy by recycling waste; (3) estimating total external cost saved by recycling waste and; (4) providing a decision support tool that helps in re-thinking about waste disposal. The proposed evaluation methodology allows activating the stringent regulations that restrict waste disposal and developing incentives to encourage constructors to recycle their wastes. The research findings show that recycling CDW leads to significant reductions in emissions, energy use, global warming potential (GWP), and conserves landfills space when compared to disposal of wastes in landfills. Furthermore, the cost of mitigating the impact of disposal is extremely high. Therefore, it is necessary to recycle construction and demolition wastes.     

From landfill to water,land and life: The creation of the Centre for stone materials aimed at secondary processing

This paper focuses on the creation of a Centre for the recycling of stone materials. The Centre will be able to offer a range of activities amongst which is the improvement of the production chain of the Orosei Marble district in Sardinia, Italy. Several companies operate within the marble producing area, specializing in both quarrying and stone processing. They have formed a Consortium in order to rehabilitate an area of more than 17 ha. The restoration will be carried out through an environmentally sustainable procedure. The area was previously used as a landfill for waste deriving from marble quarrying and processing. At that time unshaped blocks of various sizes (which are unsuitable to block-cutter sawing), waste deriving from both block sawing and slab/strip cutting (such as broken slabs, strips, tiles) and microfine dust from filter presses of water treatment plants were representing an environmental problem. The local administration was struggling to find new areas which could be used for landfills, resulting in an additional cost for the landfill, ultimately affecting the variable production costs. The project involves the building of a venue to be used for temporary storage, treatment of wastes produced by both quarrying and primary processing, in order to make them suitable as secondary raw materials. The project also deals with the catch basin hydrology of the area involved in the project, the building of a multifunctional centre, the landscaping and other environmental features such as vehicle traffic and slopes greening.     

Identifying Opportunities for Decision Support Systems in Support of Regional Resource Use Planning: An Approach Through Soft Systems Methodology

/ Regional resource use planning relies on key regional stakeholder groups using and having equitable access to appropriate social, economic, and environmental information and assessment tools. Decision support systems (DSS) can improve stakeholder access to such information and analysis tools. Regional resource use planning, however, is a complex process involving multiple issues, multiple assessment criteria, multiple stakeholders, and multiple values. There is a need for an approach to DSS development that can assist in understanding and modeling complex problem situations in regional resource use so that areas where DSSs could provide effective support can be identified, and the user requirements can be well established. This paper presents an approach based on the soft systems methodology for identifying DSS opportunities for regional resource use planning, taking the Central Highlands Region of Queensland, Australia, as a case study.     

Integrated treatment and recycling of stormwater: a review of Australian practice

With the use of water approaching, and in some cases exceeding, the limits of sustainability in many locations, there is an increasing recognition of the need to utilise stormwater for non-potable requirements, thus reducing the demand on potable sources. This paper presents a review of Australian stormwater treatment and recycling practices as well as a discussion of key lessons and identified knowledge gaps. Where possible, recommendations for overcoming these knowledge gaps are given. The review of existing stormwater recycling systems focussed primarily on the recycling of general urban runoff (runoff generated from all urban surfaces) for non-potable purposes. Regulations and guidelines specific to stormwater recycling need to be developed to facilitate effective design of such systems, and to minimise risks of failure. There is a clear need for the development of innovative techniques for the collection, treatment and storage of stormwater. Existing stormwater recycling practice is far ahead of research, in that there are no technologies designed specifically for stormwater recycling. Instead, technologies designed for general stormwater pollution control are frequently utilised, which do not guarantee the necessary reliability of treatment. Performance modelling for evaluation purposes also needs further research, so that industry can objectively assess alternative approaches. Just as many aspects of these issues may have impeded adoption of stormwater, another impediment to adoption has been the lack of a practical and widely accepted method for assessing the many financial, social and ecological costs and benefits of stormwater recycling projects against traditional alternatives. Such triple-bottom-line assessment methodologies need to be trialled on stormwater recycling projects. If the costs and benefits of recycling systems can be shown to compare favourably with the costs and benefits of conventional practices this will provide an incentive to overcome other obstacles to widespread adoption of stormwater recycling.     

Global disposal strategies for waste cathode ray tubes

The collection and management of waste electrical and electronic appliances around the world, and the possible negative environmental consequences have been an issue of current debate. Cathode ray tubes (CRTs) used as display screen for computer monitors and televisions contains large quantities of lead, estimated at between 0.5 and 4 kg, depending on the size of the CRT and has been identified as the most polluting of all electronic waste components. Having failed the tests used in the toxicity characterization of solid wastes, CRTs have been declared ‘hazardous’ and subsequently banned from landfills and incinerators in most developed countries. Presently, large quantities of CRTs are generated globally with only few developed countries having effective take back and sound management program. Meanwhile, large quantities of CRT-containing devices are being moved across frontiers into developing countries in the name of ‘reuse’ and ‘bridging the digital divide’. With near absence of recycling infrastructure for electronic wastes in most developing countries, waste CRTs are disposed of with MSW at open dumps and unsanitary landfills. This paper reviews the current practices in the management of CRTs around the world, with emphasis on the role of regulations, availability of recycling infrastructure, recycling/reuse routes, and export into developing countries. Inappropriate disposal of waste CRTs creates the opportunity for large-scale environmental contamination with heavy metals, especially lead. Appropriate disposal routes are required globally in the management of CRTs in order to mitigate environmental contamination and human exposure to toxins.     

Overview of household solid waste recycling policy status and challenges in Malaysia

With the annual increase in waste generation and heavy reliance on landfilling as disposal, method in Malaysia, it is just a matter of time before significant problems of space limitations, health, and environmental issues hit the nation severely. This paper attempts to develop an overview on solid, waste recycling in Malaysia at the most basic level of a community or nation which is the household, unit. Households are the main primary source of municipal solid waste in Malaysia, consisting of, recyclable materials at most 70% to 80% of the total waste composition as found placed in the, landfills. Overview on the existing household solid waste recycling policy and program status in, Malaysia is relevant in enhancing solid waste management measure from recycling perspective. Despite the high potential and opportunities for solid waste recycling, wastes are still simply being, dumped in an open area of ground without any attempt for recovery and recycling. Comparing to, recycling rates of neighboring countries, Malaysia is falling back at merely 5% which proves how, uncommon recycling practice is. The government is committed to significantly improve the national's, solid waste management services especially in waste minimization. Fortunately the emphasis on, recycling as a sustainable waste management strategy has taken a shift in paradigm as wastes, separation and recycling are part of the major changes in the current policy implementation. With, issues and challenges in recycling practice that were highlighted in this context especially from the, aspects of information availability and other loopholes within solid waste management policies and, related recycling program within the community, the question on whether the goals in 2020 can be, met remains unsure of but there is a possibility for a successful implementation of sustainable solid, waste management particularly in recycling.     

应用反渗透技术处理垃圾填埋场渗滤液

垃圾填埋场渗滤液属于高浓度氨氮废水,其水量、水质特性变化大,成分复杂,因此较难处理。反渗透分离技术能有效截留垃圾渗滤液中溶解态的有机和无机污染物。采用三级反渗透处理垃圾渗滤液工艺处理后的出水水质,能够满足《生活垃圾填埋污染控制标准》（DB16889-2008）要求,并把渗滤液浓缩液回灌于填埋场。     

Grey water reclamation by decentralized MBR prototype

Grey water treatment and reuse for non-drinking water requirements has become of great interest in arid and semi-arid zones where water resources are becoming both quantitatively and qualitatively scarce. In this study a decentralized and automatic MBR prototype has been designed and installed in the REMOSA facilities for treatment of low-load grey water to be recycled in flushing-toilet application. The recycling treatment of grey water comprises four stages: screening, biological oxidation, filtration and a final disinfection by chlorination. The influent and effluent were monitored in order to determine the treatment efficiency and assessment of the quality potential of treated grey water. The results obtained indicate that recycling of grey water allows an effluent of excellent quality with organic, surfactants and microbial parameters under the limits defined by Spanish legislation for urban water reuse. The disinfection of treated grey water is required to ensure compliance with microbial standards and to avoid the health risk in storage and application of recycled water.     

A DECISION SUPPORT SYSTEM TO MANAGE SUMMER STREAM TEMPERATURES1

ABSTRACT: Warm summer stream temperatures due to low flows and high air temperatures are a critical water quality problem in many western United States river basins because they impact threatened fish species’habitat. One way to alleviate this problem is for local and federal organizations to purchase water rights to be used to increase flows, hence decrease temperatures. Presented is a Decision Support System (DSS) that can be used in an operations mode to effectively use water acquired to mitigate warm stream temperatures. The DSS uses a statistical model for predicting daily stream temperatures and a rule‐based module to compute reservoir releases. Water releases are calculated to meet fish habitat temperature targets based on the predicted stream temperature and a user specified confidence of the temperature predictions. Strategies that enable effective use of a limited amount of water throughout the season have also been incorporated in the DSS. The utility of the DSS is demonstrated by an example application to the Truckee River near Reno, Nevada, using hypothetical operating policy and 1988 through 1994 inflows. Results indicate that the DSS could substantially reduce the number of target temperature violations (i.e., stream temperatures exceeding the target temperature levels detrimental to fish habitat).     

Predictive model for areas with illegal landfills using logistic regression

The existence of illegal landfills is an environmental problem in most countries. However, research on this issue is scarce and limited by the availability and quality of data on the subject. Thus, most illegal landfill studies have only been conducted in a partial manner, focusing on geographical aspects or the causes of these landfills (lack of environmental awareness, inadequate waste management systems, and the role of local government). This research analyses a sample of 120 possible areas with illegal landfills in Andalusia using logistic regression in order to obtain a predictive model for the occurrence of these landfills, including both types of variables (geographical and behavioural) jointly. The results confirm that the variables that most influence the occurrence of illegal landfills are spatial (“Industrial Land”, “Plains” and “Rural Land”); whilst the variables that most reduce the likelihood of illegal landfills are those related to certain characteristics of the municipal waste management system and environmental awareness, such as “Availability of Recycling Facilities”, “Punitive Policies”, “Supervision” and “Awareness-raising Campaigns”. The model obtained shows that variables of very different nature and magnitude interact in the occurrence of illegal landfills, each of which contributes a series of features characteristic of its scale. It is advisable, therefore, to perform an analysis using a multi-scale approach in order to gain an overall understanding of the phenomenon.     

Assessing the demand of solid waste disposal in urban region by urban dynamics modelling in a GIS environment

The twentieth century saw a dramatic increase in the production of urban solid waste, reflecting unprecedented global levels of economic activity. Despite some efforts to reduce and recover the waste, disposal in landfills is still the most usual destination. However, landfill has become more difficult to implement because of its increasing cost, community opposition to landfill siting, and more restrictive environmental regulations regarding the siting and operation of landfills. Moreover, disposal in landfill is the waste destination method with the largest demand for land, while land is a resource whose availability has been decreasing in urban systems. Shortage of land for landfills is a problem frequently cited in the literature as a physical constraint. Nonetheless, the shortage of land for waste disposal has not been fully studied and, in particular, quantified. This paper presents a method to quantify the relationship between the demand and supply of suitable land for waste disposal over time using a geographic information system and modelling techniques. Based on projections of population growth, urban sprawl and waste generation the method can allow policy and decision-makers to measure the dimension of the problem of shortage of land into the future. The procedure can provide information to guide the design and schedule of programs to reduce and recover waste, and can potentially lead to a better use of the land resource. Porto Alegre City, Brazil was used as the case study to illustrate and analyse the approach. By testing different waste management scenarios, the results indicated that the demand for land for waste disposal overcomes the supply of suitable land for this use in the study area before the year 2050.     

废弃LCD的处理及其铟的回收技术

伴随着我国电子产业的蓬勃发展,电子产品生产及其废弃产生的金属资源浪费问题也日趋严重,国家在“十二五”规划中提出了新型液晶显示屏（LCD）的开发及其资源化回收处理,可见LCD的处理和从其废弃物中提取铟的技术亟待深入研究。本文介绍了LCD显示屏和主要含铟部件ITO材料之间的关系、生产和使用状况,重点详述了LCD和ITO材料资源化处理的研究现状,系统地总结了铟的回收方法,并展望了未来电子废弃物的处理方向。     

电石渣浆处理与资源化

针对电石渣浆处理的工艺流程和资源化途径进行了效益分析,工程实践表明:电石渣浆处理后,浆水回用作为生产用水,降低了乙炔生产成本.同时彻底解决电石渣含水率高的问题,利于企业开展资源化,值得在乙炔行业推广.     

Survival,reproduction, and recruitment of woody plants after 14 years on a reforested landfill

With the advent of modern sanitary landfill closure techniques, the opportunity exists for transforming municipal landfills into urban woodlands. While costs of fullscale reforestation are generally prohibitive, a modest planting of clusters of trees and shrubs could initiate or accelerate population expansions and natural plant succession from open field to diverse forest. However, among woody species that have been screened for use on landfills, these ecological potentials have not yet been investigated. We examined a 14-yr-old landfill plantation in New Jersey, USA, established to test tolerance of 19 species of trees and shrubs to landfill environments. We measured survivorship, reproduction, and recruitment within and around the experimental installation. Half of the original 190 plants were present, although survival and growth rates varied widely among species. An additional 752 trees and shrubs had colonized the plantation and its perimeter, as well as 2955 stems of vines. However, the great majority (>95%) of woody plants that had colonized were not progeny of the planted cohort, but instead belonged to 18 invading species, mostly native, bird-dispersed, and associated with intermediate stages of secondary plant succession. Based on this evidence, we recommend that several ecological criteria be applied to choices of woody species for the restoration of municipal landfills and similar degraded sites, in order to maximize rapid and economical establishment of diverse, productive woodlands.     

Performance measurement for incineration plants using multi-activity network data envelopment analysis: The case of Taiwan

This study proposes the use of multi-activity network data envelopment analysis to appraise how incineration plants in Taiwan perform. Sample data from 2006 is used to examine the trade-offs between efficiency enhancement and pollution abatement. The respective efficiencies of the waste treatment and electricity generation are also assessed in a unified framework. The empirical results indicate that it is more important to improve the efficiency of waste treatment activity than of electricity generation activity in order to enhance the overall performance of Taiwan's incinerators. Since ownership, location and length of operations do not in general affect their performance, any improvement has to come from the careful monitoring of each process of the waste treatment operations. Furthermore, given that the policy in Taiwan has moved away from incineration to recycling, the problem of an over-supply of incinerators may become apparent in the near future. Our results indicate that the availability of capacity size may be an important factor when policy-makers consider whether to close down some existing incinerators.     

Recycling inorganic domestic solid wastes: results from a pilot study in Dar es Salaam City, Tanzania

Solid waste recycling and recovery approach can be a sustainable and effective waste management system in many growing cities of the least developed countries. In the course of achieving proper solid waste management, a lot of efforts in these countries have, however, been focused more on collection and disposal and ignored waste recycling which can result into income generation, employment creation and reduction of the waste quantities that will finally require disposal in the existing municipal landfills or disposal sites. This paper reports the findings of a study on solid waste recycling in a selected semi-planned settlement in Dar es Salaam City, Tanzania. The objective of the study was to describe the existing solid waste management in the study area with a view to identifying the waste generation rates, types of the wastes and determine the amount of waste from the settlement that can be recycled for the purpose of income generation and reduction of the total amount of waste to be disposed of. Findings from this study revealed that waste generation rate in the study area was 0.36 kg per person per day, and that out of the 14 600 kg of recyclable waste generated per year, 8030 kg or 55% can be recycled and generate a per capita income of Tsh 834 000 for waste recyclists which is more than twice the official minimum annual wage (Tsh 360 000) in Tanzania at the time of the study. The study also revealed that effective waste recycling in the study area would result in the reduction of the total waste that need to be transported for final disposal by 11%.