粉煤灰用于碳捕集、利用及封存的研究进展

总结了国内外粉煤灰用于CO₂捕集、利用和封存的不同技术研究进展,同时对今后的研究和机遇进行了展望.粉煤灰自身可通过直接干式、半干式、湿式和间接方法对CO₂进行矿化捕集封存,在CO₂矿化的同时降低粉煤灰自身重金属的浸出,并且矿化后的粉煤灰因有效降低游离CaO和MgO的含量而更适合于制作混凝土添加剂.粉煤灰也可制成活性炭、沸石和多孔二氧化硅等产品,并对CO₂进行物理吸附捕集,制成产品的类型主要取决于粉煤灰自身的成分组成和理化性质.在CO₂利用方面,粉煤灰除了可拓展建材的利用途径外,还可制作CO₂多种化学工艺所需催化剂或催化剂载体,以及制作新型材料拟薄水铝石等.我国“双碳”目标的提出及燃煤电厂粉煤灰自身的理化特性为粉煤灰提供了一条新的综合利用途径.     

以粉煤灰为原料制备低温CO2吸附剂的工艺参数优化

利用高铝粉煤灰预脱硅液作为载体原料,通过使用胺基化合物对载体改性制备低温CO_2吸附剂.应用6 sigma中的工具,对制备工艺进行优化,得到理想的吸附剂,并对吸附剂样品进行表征.结果表明制备的CO_2吸附剂表现出良好的CO_2吸附性能.此类CO_2吸附剂具有吸附容量高(160 mg·g~(-1))、吸附速率快、对设备腐蚀低、成本低廉等特点,是一种极具工业应用潜力的CO_2吸附剂.     

加速碳酸化技术对城市垃圾焚烧飞灰重金属稳定性影响研究

对南方某城市生活垃圾焚烧厂新鲜焚烧飞灰对CO₂的吸收及其碳酸化的过程进行了研究,实验从水分添加量、CO₂的分压等因素,考察了飞灰中重金属Pb的稳定化效果,并利用X射线衍射实验(XRD)、扫描电镜实验(SEM)对反应机理进行了分析.结果表明,不添加水分时,焚烧飞灰对CO₂的吸收效果较差;当水分添加量大于10％时,焚烧飞灰对CO₂的吸收效果较好.焚烧飞灰对纯CO₂的吸收效果较好,空气中的CO₂含量较低,在反应1 d后吸收效果不是十分明显.XRD实验结果表明,CO₂的吸收会使焚烧飞灰中大量的Ca(OH)₂与CO₂反应转化为CaCO₃,从而降低焚烧飞灰的碱性;部分重金属的氧化物会被碳酸化成生相应的碳酸盐.SEM实验结果表明,经过碳酸化处理后的飞灰颗粒表面生成了片状和圆柱状的晶体物质.     

基于碳捕集的富氧燃煤烟气联合脱硫脱硝试验研究

富氧燃煤烟气压缩液化CO2的高压低温工况为NO氧化为易溶于水的NO2提供了十分有利的条件.基于小型高压吸收试验装置,采用配制的富氧燃煤模拟烟气,在高压常温下进行了NO、SO2、O2与H2O的吸收反应试验.根据反应前后的气液产物分析,测定了不同组分比例与不同压力下混合气体中NO与SO2的转化率.NO氧化与吸收试验表明,NO转化为HNO3的比率随压力升高而增加,在0.5 ～2 MPa之间增加很快,在2 ～3 MPa之间增速趋丁平缓,压力达3 MPa以上时,90％以上的NO均转化为稀硝酸,且初始NO浓度越高,NO的转化率越大.混合气体中同时存在5O2与NO的联合吸收试验发现,只有少量的NO转化成了NO3-,SO2向H2SO4的转化率随压力升高而增加,初始SO2浓度越大,转化率越高.分析表明,SO2与NO同时存在时SO2先行转化为SO3,NO充当了催化剂,但SO2转化为SO3的一次转化率小于35％,反应酸液产物的多次循环能使SO2的转化率达到90％以上.建议的工艺流程中需采用两座吸收反应塔顺序脱除SO2与NO并回收稀酸溶液,有望在富氧燃煤发电捕集CO2系统中降低脱硫脱硝成本,部分地弥补富氧燃烧机组发电成本的增加.     

Two-step accelerated mineral carbonation and decomposition analysis for the reduction of CO2 emission in the eco-industrial parks

Carbon dioxide（CO2） emissions are a leading contributor to the negative effects of global warming. Globally, research has focused on effective means of reducing and mitigating CO2 emissions. In this study, we examined the efficacy of eco-industrial parks（EIPs） and accelerated mineral carbonation techniques in reducing CO2 emissions in South Korea.First, we used Logarithmic Mean Divisia Index（LMDI） analysis to determine the trends in carbon production and mitigation at the existing EIPs. We found that, although CO2 was generated as byproducts and wastes of production at these EIPs, improved energy intensity effects occurred at all EIPs, and we strongly believe that EIPs are a strong alternative to traditional industrial complexes for reducing net carbon emissions. We also examined the optimal conditions for using accelerated mineral carbonation to dispose of hazardous fly ash produced through the incineration of municipal solid wastes at these EIPs. We determined that this technique most efficiently sequestered CO2 when micro-bubbling, low flow rate inlet gas, and ammonia additives were employed.     

常压和真空下CS2的光氧化反应

利用原位FTIR、XPS 和GC-MS等技术手段,研究了常温紫外光辐照下常压及真空状态中,CS₂的光氧化反应.结果表明,常压及真空状态下CS₂光氧化反应的产物均为COS、SO₂、CO 和 CO₂,反应均遵循表观一级反应动力学规律,但中间产物COS的浓度变化有较大的差异.常压下COS浓度先迅速增大,然后减少; 真空条件下COS浓度增加到常压下COS浓度的 1/10后基本持平,然后逐渐减小,整个变化趋势缓慢; 2种条件下CS₂的半衰期分别为31.6 s和39.8 s, 中间产物COS降解 98% 所需时间分别为 55 min和22 min.在相同的光照条件下,O₂浓度的增加有助于CS₂光氧化反应的进行.以CS₂光氧化中间产物COS为初始物的光氧化反应主要产物为CO₂和SO₂,后者可以进一步被氧化为SO2-4.适量增加O₂的浓度可以促进COS光氧化反应的进行,但O₂的浓度增加至一定程度后反应速率基本保持恒定.以上结论对揭示CS₂和COS的源和汇以及全球S物质循环具有重要价值.     

Experimental study of NO2 reduction in N2/Ar and O2/Ar mixtures by pulsed corona discharge

Non-thermal plasma technology has been regarded as a promising alternative technology for NOx removal. The understanding of NO2 reduction characteristics is extremely important since NO2 reduction could lower the total NO oxidation rate in the plasma atmosphere. In this study, NO2 reduction was experimentally investigated using a non-thermal plasma reactor driven by a pulsed power supply for different simulated gas compositions and operating parameters. The NO2 reduction was promoted by increasing the specific energy density （SED）, and the highest conversion rates were 33.7%, 42.1% and 25.7% for Ar, N2/Ar and O2/Ar, respectively. For a given SED, the NO2 conversion rate had the order N2/Ar 〉 Ar 〉 02/Ar. The highest energy yield of 3.31 g/kWh was obtained in N2/Ar plasma and decreased with increasing SED; the same trends were also found in the other two gas compositions. The conversion rate decreased with increasing initial NO2 concentration. Furthermore, the presence of N2 or O2 led to different reaction pathways for NO2 conversion due to the formation of different dominating reactive radicals.     

Fe2O3 particles as superior catalysts for low temperature selective catalytic reduction of NO with NH3

Fe203 particle catalysts were experimentally studied in the low temperature selective catalytic reduction （SCR） of NO with NH3. The effects of reaction temperature, oxygen concentration, [NH3]/[NO] molar ratio and residence time on SCR activity were studied. It was found that Fe203 catalysts had high activity for the SCR of NO with NH3 in a broad temperature range of 150-270℃, and more than 95% NO conversion was obtained at 180℃ when the molar ratio [NH3]/[NO] = 1, the residence time was 0.48 seconds and 02 volume fraction was 3%. In addition, the effect of SO2 on SCR catalytic activity was also investigated at the temperature of 180℃. The results showed that deactivation of the Fe2O3 particles occurred due to the presence of SO2 and the NO conversion decreased from 99.2% to 58% in 240 min, since SO2 gradually decreased the catalytic activity of the catalysts. In addition, X-ray diffraction, Thermogravimetric analysis and Fourier transform infrared spectroscopy were used to characterize the fresh and deactivated Fe2O3 catalysts. The results showed that the deactivation caused by SO2 was due to the formation of metal sulfates and ammonium sulfates on the catalyst surface during the de-NO reaction, which could cause pore plugging and result in suppression of the catalytic activity.     

Effect of Ce doping of TiO2 support on NH3-SCR activity over V2O5-WO3/CeO2-TiO2 catalyst

CeO2–TiO2composite supports with different Ce/Ti molar ratios were prepared by a homogeneous precipitation method, and V2O5–WO3/CeO2–TiO2catalysts for the selective catalytic reduction（SCR） of NOx with NH3 were prepared by an incipient-wetness impregnation method. These catalysts were characterized by means of BET, XRD, UV–Vis,Raman and XPS techniques. The results showed that the catalytic activity of V2O5–WO3/TiO2 was greatly enhanced by Ce doping（molar ratio of Ce/Ti = 1/10） in the TiO2 support.The catalysts that were predominantly anatase TiO2 showed better catalytic performance than the catalysts that were predominantly fluorite CeO2. The Ce additive could enhance the surface adsorbed oxygen and accelerate the SCR reaction. The effects of O2 concentration, ratio of NH3/NO, space velocity and SO2 on the catalytic activity were also investigated. The presence of oxygen played an important role in NO reduction. The optimal ratio of NH3/NO was 1/1 and the catalyst had good resistance to SO2 poisoning.     

SO2对Ag/Al2O3催化剂上CH3OH还原NO性能的影响

用溶胶-凝胶混合法制备了Ag负载量为5%的Ag/A1₂O₃催化剂.研究了富氧条件下,SO₂对CH₃OH在催化剂上还原NO性能的影响.结果表明,反应气不含SO₂和H₂O时,NO还原活性温度较低,有显著量N₂O生成,这被归因为反应过程中,部分氧化态Ag被还原为金属Ag.添加SO₂或同时添加SO₂和H_{2相似文献}   

包气带水气二相流CO2运移规律

利用土柱实验装置模拟CO₂在土壤中的迁移转化规律,重点研究湿润峰处水、气二相间污染物转化实验土柱长1m,过饱和CO2溶液浓度为748mg/L.分析表明水相运移受对流、弥散、反应及水-气质量传输机制控制,气相运移受对流、扩散和水-气质量传输机制控制.对土柱中水气二相动态条件下的取样方法进行了探索,确定了CO₂在渗透湿润峰水-气二相间分配系数为0.00061,表明水相向气相有一定传输,但不显著.可进一步为低中水平放射性废物地质处置安全评价及固体废物填埋处置环境影响评价提供定量科学依据.     

水蒸气电晕放电下的烟气脱硫效果

采用多针-板式电极,在70 m³/h烟气流量范围内,研究了水蒸气浓度、烟气流量、电场强度等因素对不饱和水蒸气正直流电晕放电烟气脱硫率的影响以及水蒸气电晕放电对脉冲放电烟气脱硫率的提高.研究结果表明,实验范围内,按照NH₃∶SO₂摩尔比为2∶1添加NH3的条件下,增加水蒸气流量、增强电场强度、减少烟气流量,烟气脱硫率能提高10%,达到60%左右.同时,水蒸气电晕放电能使脉冲放电的烟气脱硫率提高5%左右,达到90%以上.     

固定化碳酸酐酶在立式反应器催化吸收模拟烟气中CO2的实验研究

利用海藻酸钠包埋和戊二醛交联法固定碳酸酐酶,并在立式反应器进行了固定化酶吸收CO2的特性实验.实验结果表明:固定化酶的酶活力回收率是56.3%;固定化酶显著加快模拟烟气中CO2的吸收;载酶量小时,气体流量是影响吸收CO2效果的主要因素,气体流量增大,载酶量成为主要因素;气体流量增大,载酶量对反应终止p H的影响减小;载酶量增大,气体流量对反应终止p H的影响减小;气体流量增大,CO2吸收效率下降,载酶量提高,CO2吸收效率上升;气体流量为650 m L·min-1和载酶量为1 mg时,固定化酶催化吸收CO2效果显著;固定化酶具有较高的操作稳定性;SEM显示反应后的固定化酶表面出现大量形状不规则的小孔,空隙结构变得发达.     

NOx和/或NH3气氛下SO2在高岭土表面非均相转化的实验研究

利用自制气溶胶反应器研究了NO_x和/或NH_3气氛下SO_2在高岭土表面的非均相转化过程,应用扫描电镜(SEM)对高岭土颗粒物形貌进行了表征.结果表明:高岭土颗粒表面的SO_2非均相转化致使其成分和形貌产生了较大变化.相同实验条件下,SO_2转化的协同作用程度由高到低依次为NH_3、NO_x/NH_3和NO_x气氛,相对湿度40%、有光照条件下,SO_2转化量增幅最高可分别达125%、75%和50%.所有气氛下,协同作用在无光照时在高相对湿度(40%~70%)区间更为突出,有光照时其显著性则体现在低相对湿度(20%~40%)区间.SO_2、NO_x、NH_3三者共存时,在高岭土颗粒表面发生的非均相反应过程既有协同作用又存在竞争反应.     

CO2 adsorption using TiO2 composite polymeric membranes: A kinetic study

CO₂ is the main greenhouse gas which causes global climatic changes on larger scale. Many techniques have been utilised to capture CO₂. Membrane gas separation is a fast growing CO₂ capture technique, particularly gas separation by composite membranes. The separation of CO₂ by a membrane is not just a process to physically sieve out of CO₂ through the controlled membrane pore size. It mainly depends upon diffusion and solubility of gases, particularly for composite dense membranes. The blended components in composite membranes have a high capability to adsorb CO₂. The adsorption kinetics of the gases may directly affect diffusion and solubility. In this study, we have investigated the adsorption behaviour of CO₂ in pure and composite membranes to explore the complete understanding of diffusion and solubility of CO₂ through membranes. Pure cellulose acetate (CA) and cellulose acetate-titania nanoparticle (CA-TiO₂) composite membranes were fabricated and characterised using SEM and FTIR analysis. The results indicated that the blended CA-TiO₂ membrane adsorbed more quantity of CO₂ gas as compared to pure CA membrane. The high CO₂ adsorption capacity may enhance the diffusion and solubility of CO₂ in the CA-TiO₂ composite membrane, which results in a better CO₂ separation. The experimental data was modelled by Pseudo first-order, pseudo second order and intra particle diffusion models. According to correlation factor R², the Pseudo second order model was fitted well with experimental data. The intra particle diffusion model revealed that adsorption in dense membranes was not solely consisting of intra particle diffusion.     

Heterogeneous oxidation of SO2 by O3-aged black carbon and its dithiothreitol oxidative potential

Ozone (O₃) is an important atmospheric oxidant. Black carbon (BC) particles released into the atmosphere undergo an aging process via O₃ oxidation. O₃-aged BC particles may change their uptake ability toward trace reducing gases such as SO₂ in the atmosphere, leading to different environmental and health effects. In this paper, the heterogeneous reaction process between O₃-aged BC and SO₂ was explored via in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Combined with ion chromatography (IC), DRIFTS was used to qualitatively and quantitatively analyze the sulfate product. The results showed that O₃-aged BC had stronger SO₂ oxidation ability than fresh BC, and the reactive species/sites generated on the surface had an important role in the oxidation of SO₂. Relative humidity or 254 nm UV (ultraviolet) light illumination enhanced the oxidation uptake of SO₂ on O₃-aged BC. The oxidation potentials of the BC particles were detected via dithiothreitol (DTT) assay. The DTT activity over BC was decreased in the process of SO₂ reduction, with the consumption of oxidative active sites.     

V2O5/TiO2催化剂中毒机理的试验研究

选择性催化还原(SCR)催化剂是SCR烟气脱硝技术的核心,是整个SCR系统脱硝效率和经济性的决定因素.本文工作的主要研究思路是以钒钛SCR催化剂为研究对象,研究了H2O和SO2,以及相同含量下K、Na、Ca、Pb的氧化物对钒钛催化剂NO转化率的影响.H2O的存在会抑制V2O5/TiO2催化剂脱硝活性,而SO2在一定程度上促进(V2O5/TiO2)催化剂的SCR脱硝反应,提高NO转化率;碱金属K对钒钛催化剂的钝化作用都是最强,K2O和Na2O的掺入会抑制钒钛催化剂上V2O5的还原能力,而CaO和PbO的掺入对钒钛催化剂上V2O5的还原能力影响较小.     

富氧条件下SnO2/Al2O3催化剂上丙烯选择性还原NOx的研究

考察了分别用浸渍法、共沉淀法和溶胶-凝胶法制备的SnO₂/Al₂O₃催化剂上丙烯选择性还原NO_x的催化活性,发现制备方法与Sn的负载量对其活性有重要影响.溶胶-凝胶法制备的SnO₂/Al₂O₃催化剂活性最高,Sn的最佳负载量为5%.与浸渍法和共沉淀法制备的5%SnO₂/Al₂O₃催化剂相比,溶胶-凝胶法制备的5%SnO₂/Al₂O₃催化剂受水蒸汽的抑制作用较弱,并且在水和SO₂共存的条件下活性最高.此外,反应气中丙烯及氧气浓度的增加有利于NO_x转化率的提高.     

Regeneration performance and carbon consumption of semi-coke and activated coke for SO2 and NO removal

To decrease the operating cost of flue gas purification technologies based on carbon-based materials, the adsorption and regeneration performance of low-price semi-coke and activated coke were compared for SO₂ and NO removal in a simulated flue gas. The functional groups of the two adsorbents before and after regeneration were characterized by a Fourier transform infrared (FTIR) spectrometer, and were quantitatively assessed using temperature programmed desorption (TPD) coupled with FTIR and acid–base titration. The results show that semi-coke had higher adsorption capacity (16.2% for SO₂ and 38.6% for NO) than activated coke because of its higher content of basic functional groups and lactones. After regeneration, the adsorption performance of semi-coke decreased because the number of active functional groups decreased and the micropores increased. Semi-coke had better regeneration performance than activated coke. Semi-coke had a larger SO₂ recovery of 7.2% and smaller carbon consumption of 12% compared to activated coke. The semi-coke carbon-based adsorbent could be regenerated at lower temperatures to depress the carbon consumption, because the SO₂ recovery was only reduced a small amount.     

不同光源下TiO2/ACF同时脱硫脱硝实验研究

实验室制备了负载型二氧化钛光催化剂TiO₂/ACF,利用自行设计的光催化反应器,在紫外和可见2种光源下进行了同时脱硫脱硝试验,确定了最佳的试验条件,比较了2种不同光源下的脱除效率.结果表明,烟气中氧含量、反应温度、烟气含湿量、光照强度等是影响光催化的主要因素,在紫外光源的照射下,负载型TiO₂/ACF光催化剂脱除SO₂和NO的效率分别达到99.7%和64.3%,在可见光源的照射下,负载型TiO₂/ACF光催化剂脱除SO₂和NO的效率分别达到97.5%和49.6%, 5次平行试验结果表明,平行数据的标准偏差S较小.通过反应后吸收液的离子色谱分析,推测了2种不同光源下同时脱硫脱硝的反应机制.