Medical waste management in Korea

The management of medical waste is of great importance due to its potential environmental hazards and public health risks. In the past medical waste was often mixed with municipal solid waste and disposed of in residential waste landfills or improper treatment facilities (e.g. inadequately controlled incinerators) in Korea. In recent years, many efforts have been made by environmental regulatory agencies and waste generators to better manage the waste from healthcare facilities. This paper presents an overview of the current management practices of medical waste in Korea. Information regarding generation, composition, segregation, transportation, and disposal of medical wastes is provided and discussed. Medical waste incineration is identified as the most preferred disposal method and will be the only available treatment option in late 2005. Faced with increased regulations over toxic air emissions (e.g. dioxins and furans), all existing small incineration facilities that do not have air pollution control devices will cease operation in the next few years. Large-scale medical waste incinerators would be responsible for the treatment of medical waste generated by most healthcare facilities in Korea. It is important to point out that there is a great potential to emit air toxic pollutants from such incinerators if improperly operated and managed, because medical waste typically contains a variety of plastic materials such as polyvinyl chloride (PVC). Waste minimization and recycling, control of toxic air emissions at medical waste incinerators, and alternative treatment methods to incineration are regarded to be the major challenges in the future.     

An approach to tackling the environmental and health impacts of municipal solid waste disposal in developing countries

Indiscriminate disposal of municipal solid waste in developing countries poses severe environmental and health threats. The study proposes a new method for dealing with these problems. The hybrid structural interaction matrix (HSIM) was used to prioritise major identifiable environmental health factors arising from improper solid waste disposal. The simplistic resource allocation model was adopted to ensure optimality in the allocation of resources to prioritised factors. The study indicates that tackling environmental health impacts from the most prioritised negative disposal factors through optimal allocation of resources, will either reduce or eliminate the impacts associated with subsequent less prioritised factors that are direct consequences of the highly prioritised negative factors. The method proposed will aid decision makers in knowing which set of systemic factors are to be given preference and to what extent at given periods in time.     

Transitions of municipal solid waste management. Part II: Hybrid life cycle assessment of Swiss glass-packaging disposal

In policy support of municipal solid waste (MSW) management, life cycle assessment (LCA) can serve to compare the environmental or economic impacts of two or more options for waste processing. The scope of waste management LCAs generally focuses less attention on future developments, e.g., where will recycling take place, and more on the environmental performance of prototypes, e.g., the incineration of all waste compared to recycling. To provide more robust support for Swiss waste glass-packaging disposal, scenarios of Swiss waste glass-packaging are assessed from a life cycle perspective. The scenarios consist in schemes for the disposal of the total amount of Swiss waste glass-packaging, i.e., different combinations of recycling and downcycling in Switzerland or abroad developed in Part I, Meylan et al. (2013). In this article (Part II), the disposal schemes are assessed with respect to eco-efficiency, an indicator that combines total environmental impacts and gross value added in Switzerland. Results show that no policy alternative guarantees environmental impact reductions and gross value added gains under all developments of exogenous constraints. Downcycling to foam glass in Switzerland is not only an environmentally sound disposal option, but it also buffers gross value added losses in case domestic recycling (and thus glass-packaging production in Switzerland) ceases in the future. The substitution of products based on raw materials other than Swiss cullet is the main responsible for change in environmental and economic impacts. Hence, an eco-efficiency maximizing policy should consider the products of disposal schemes. The combination of scenario analysis and eco-efficiency assessment as presented in this paper can be applied to other contexts (i.e., countries, waste fractions).     

A choice experiment analysis for solid waste disposal option: a case study in Malaysia

In Malaysia, most municipal wastes currently are disposed into poorly managed 'controlled tipping' systems with little or no pollution protection measures. This study was undertaken to assist the relevant governmental bodies and service providers to identify an improved waste disposal management strategy. The study applied the choice experiment technique to estimate the nonmarket values for a number of waste disposal technologies. Implicit prices for environmental attributes such as psychological fear, land use, air pollution, and river water quality were estimated. Compensating surplus estimates incorporating distance from the residences of the respondents to the proposed disposal facility were calculated for a number of generic and technology-specific choice sets. The resulting estimates were higher for technology-specific options, and the distance factor was a significant determinant in setting an equitable solid waste management fee.     

Comparative risk analysis for metropolitan solid waste management systems

Conventional solid waste management planning usually focuses on economic optimization, in which the related environmental impacts or risks are rarely considered. The purpose of this paper is to illustrate the methodology of how optimization concepts and techniques can be applied to structure and solve risk management problems such that the impacts of air pollution, leachate, traffic congestion, and noise increments can be regulated in the long-term planning of metropolitan solid waste management systems. Management alternatives are sequentially evaluated by adding several environmental risk control constraints stepwise in an attempt to improve the management strategies and reduce the risk impacts in the long run. Statistics associated with those risk control mechanisms are presented as well. Siting, routing, and financial decision making in such solid waste management systems can also be achieved with respect to various resource limitations and disposal requirements.     

A comparative analysis of the psychosocial impacts of waste disposal facilities

This paper reports the results of a comparative analysis of the psychosocial impacts of municipal solid waste disposal facilities (both landfills and incinerators) in six communities in the provinces of Ontario and British Columbia, Canada. Telephone surveys were administered to random samples of residents living around each facility between 1990 and 1995 (total n=1203). The results of logistic regression analyses show that type of facility was the strongest predictor of residents' awareness, concern, and actions taken in response to site concerns. Essentially, residents living in close proximity to a landfill had a higher probability of reporting awareness, concern or actions than residents living around an incinerator site. There was little evidence of differences in reactions between Ontario and British Columbia (BC) residents, despite variations in provincial policies on waste disposal. The effects of other predictors, with the exception of involvement in the local community, were not consistent, supporting previous findings that the determinants of facility impacts are outcome‐specific. It is essential that environmental managers take this constellation of factors into account in the operation of existing, or siting of new, facilities.     

Assessing the “design paradox” with life cycle assessment: A case study of a municipal solid waste incineration plant

One of the most important processes in an integrated waste management system is incineration, which, among the different waste management disposal options still remains a critical waste treatment system. New dynamics and approaches have to be developed to embrace such a wide and complex topic, and better knowledge and assessment of incineration are strategically significant to define future environmental scenarios.Life cycle assessment (LCA), as a tool to optimise process-operating conditions and to support decision-making process, is often applied to investigate processes under design in various sectors, since choices made in the development phases can affect the future environmental profile. However, even if the greatest opportunity to improve a process from an environmental perspective is during the design phase, at the same time the knowledge is limited, in accordance with the so-called “design paradox”.Thus, in this context, this study used LCA methodology to quantitatively assess the extent to which the environmental impact of an incineration line reflects the environmental burdens perceived during the design phase. A comparative LCA was conducted at the design phase and under operating conditions at an Italian municipal solid waste incineration plant.The outcomes of the study indicated that for almost all of the categories analysed, the impacts associated with the process under design overestimated the impacts associated with the operating process, with the exception of climate change and water depletion. The results suggested that after the conduction of an LCA at the design phase of a process, an LCA of the operative conditions should be carried out to verify how much the over- or under-estimations affected the results.     

生活垃圾填埋场建设项目环保验收调查方法研究简

垃圾填埋场建设项目的主要环境问题包括：渗沥液排放、地下水环境污染、大气环境污染、噪声污染、景观变化和环境安全。根据工作经验,建立了包括建设项目基本情况、生态环境影响、社会环境影响、生态环境保护措施四大类调查监测指标为核心的环保验收调查指标体系,提出了文件资料核实、现场勘查、遥感调查、公众意见调查、环境监测和摄影法为主的建设项目竣工环保验收调查技术方法。     

城市生活垃圾处理的现状与管理研究

城市生活垃圾的处理与资源化是环保领域的一个难点,在管理上我国也缺乏相关的法律依据。本文介绍了城市生活垃圾处理的现状,同时针对构建我国城市生活垃圾管理体系提出了建议。     

Does municipal solid waste composting make economic sense?

Currently there is widespread interest on the part of local Governments in incorporating municipal solid waste (MSW) composting into their integrated solid waste management systems. However, there is little information on the costs of MSW composting and how those costs compare with the costs of alternative forms of waste disposal (especially traditional land disposal). This article begins to fill this information gap by reporting the results of a survey of 19 MSW composting facilities around the United States. Results indicate that MSW composting generally costs around $50 per ton, and that very few facilities receive any revenues from the sale of compost to offset operating costs. Additional economic analysis indicates that, at present, MSW composting cannot be justified on financial grounds in most parts of the US, but may be competitive with land disposal where the cost of landfilling is high (such as the north-east).1998 Academic Press     

The management of household hazardous waste in the United Kingdom

Waste legislation in the United Kingdom (UK) implements European Union (EU) Directives and Regulations. However, the term used to refer to hazardous waste generated in household or municipal situations, household hazardous waste (HHW), does not occur in UK, or EU, legislation. The EU's Hazardous Waste Directive and European Waste Catalogue are the principal legislation influencing HHW, although the waste categories described are difficult to interpret. Other legislation also have impacts on HHW definition and disposal, some of which will alter current HHW disposal practices, leading to a variety of potential consequences. This paper discusses the issues affecting the management of HHW in the UK, including the apparent absence of a HHW-specific regulatory structure. Policy and regulatory measures that influence HHW management before disposal and after disposal are considered, with particular emphasis placed on disposal to landfill.     

Industrial-waste management in developing countries: the case of Lebanon

This paper presents a critical assessment of the existing Lebanese industrial sector, namely the current status and classification of industrial establishments based on a comparative synthesis and analysis of recent nationwide surveys and studies pertaining to industrial-waste management. Characterisation of solid and liquid industrial wastes generated, including hazardous wastes, is presented together with current and projected waste loads, recycling opportunities, and export/import practices. Institutional capacity and needs pertaining to the enforcement of relevant environmental legislation, staffing and resources, monitoring schemes, and public participation are critically evaluated. Finally, realistic options for industrial-waste management in the context of country-specific institutional economic and technical limitations are outlined. The industrial sector in Lebanon consists of small-scale industries (84% employ less than 10 persons), primarily involved in light manufacturing (96%). These industries which are distributed among 41 ill-defined zones and deficient in appropriate physical infrastructure, generate solid, liquid, and hazardous waste estimated at 346,730 tons/year, 20,169,600 m3/year and between 3000 to 15,000 tons/year, respectively. Although the growth of this sector contributes significantly to the socio-economic development of the country (industry accounts for 17% of the gross domestic product), in the absence of a comprehensive environmental management plan, this expansion may not be sustained into the coming millennium. The anticipated expansion will inevitably amplify adverse environmental impacts associated with industrial activities due to rising waste volumes and improper waste handling and disposal practices. These impacts are further aggravated by a deficient institutional framework, a lack of adequate environmental laws, and lax enforcement of regulations governing industrial-waste management.     

Euro-trash: searching Europe for a more sustainable approach to waste management

How an economically affordable, environmentally effective and socially acceptable municipal solid waste management system can be developed is currently unclear. Considerable research has been carried out on the practical aspects of municipal waste management (i.e. transport, treatment and disposal) and how citizens feel about source separation, recycling, incineration and landfill but the perspective of the waste manager within the context of long term planning is often ignored. In this study, waste managers from 11 different leading-edge European municipal solid waste programs in nine different countries were interviewed. The economic, social, political, environmental, legal and technical factors of their specific programs were explored and analyzed. The transition of municipal solid waste management to urban resources management was observed and key ‘system drivers’ for more sustainable waste management practices were identified. Programs visited were: Brescia (I), Copenhagen (DK), Hampshire (UK), Helsinki (FI), Lahn-Dill-Kreis (D), Malmö (SE), Pamplona (E), Prato (I), Saarbrücken (D), Vienna (A), and Zürich (CH).     

Environmental accounting for waste management: A study of local governments in Australia

Local governments in Australia, especially in large urban areas, have faced a challenge of the growing quantity of waste generated and the diminishing space for waste disposal in recent years. The central government has demonstrated the importance of developing strategies to make full environmental costs and impacts of waste disposal and material recovery accountable for waste management decision-making. However, research into this field is limited. This paper investigates environmental accounting practices in local government waste management. From a survey conducted with local government authorities in New South Wales (NSW) Australia, it is found that overall the level of direct waste flow and activity accounting is higher than the level of hidden and external environmental cost accounting, though local governments tend to identify and use more physical information associated with waste flows and activities than relevant monetary information. External environmental impacts of waste disposal are often overlooked and show the lowest level of practices. The survey results also indicate that urban local governments have taken more environmental information into account than rural local governments, but such difference is not significant between local governments of different sizes. The complexity of waste technical services and operations is confirmed to have a positive and significant effect on the level of environmental accounting for waste management across local governments surveyed.     

Open waste burning in Cameroonian cities: an environmental impact analysis

Lack of technology and efficient management of solid waste coupled with poverty have motivated most developing countries to sort for cheap waste disposal methods with negative consequences on the environment. Open burning at waste dumps causes serious toxicological impacts. Most organic solid waste excluding plastics when burned cause considerably little environmental pollution. However, non-stoichiometric combustion of waste plastics produces significant amounts of various aliphatic and aromatic compounds, acidic gases, dust and smoke. These products pollute the air, water and soil generating significant health problems with related socioeconomic impacts on human, animals and plants. Some of these pollutants are toxic and/or carcinogenic, form acid-rain and influence climate change. Critical discourse and research on environmental toxicology resulting from air pollution with related health risk and impacts have been catalysed by the enactment of major environmental regulations and increased awareness. The new clean air act amendment of 1990 is estimated to require about $25billion annually for its implementation in the United States, indicating the gravity of the pollution problem. Understanding, controlling and mitigating the impacts of chemical pollution from multiple sources related to open burning of plastics is complex. This paper uses content analysis of relevant literature and field observations to analyse, evaluate and identify characteristic pollutants including their transmission potentials, sources and impacts on human health with the assessment, prevention and management of related risk. An affordable technology-based approach applied within a bottom-up management strategy to prevent and control pollution offers a sustainable solution underpinned by resource and energy recovery from waste.     

Land Use Planning and Waste Management in Scotland

This study considers the planning system in Scotland as it relates to waste management. It examines local, structure and waste disposal plans in nine areas to identify links between the two systems. Initial findings reveal that statutory plans have limited influence on the location of new waste facilities and the reasons for this are explored. The European Union now requires the preparation of a National Waste Strategy (NWS) based on the principle of the waste hierarchy. The research concludes that effective waste management requires a close relationship between the NWS and development plans.     

Utilization of municipal solid waste (MSW) ash in cement and mortar

Solid waste management is gaining significant importance with the ever-increasing quantities of waste materials generated these days. With increased environmental awareness and its potential hazardous effects, recycling/utilization of these materials have become an attractive alternative to disposal. Some of these waste and hazardous materials could possible be used in cement-based materials. One of such waste is municipal solid waste. Ash is obtained after incineration of MSW.This paper presents comprehensive details of the physical, chemical, and mineralogical composition, elemental analysis of ash obtained from MSW. It also covers the effect of MSW ash on the hydration characteristics, setting times, compressive strength, sulfate resistance and mass loss of cement and mortar. It also deals with the leachate analysis of MSW ash.     

城市生活垃圾收集与运输路线的优化

城市生活垃圾收运系统是生活垃圾管理的重要组成部分,收运费用占垃圾处理处置费用的40%～50%,为降低收运系统成本,减少环境污染与社会影响,需对垃圾车的收运路线进行合理优化。本文在参考国内外大量文献的基础上,评述了国内外城市生活垃圾收集与运输路线的优化模型与方法及其研究进展,通过各种模型与方法的对比,指出它们的优点与存在的问题。借鉴已有的研究思路与方法,引出作者对优化城市生活垃圾收运路线的思路并给出深入研究的建议。     

Modes of governing Canadian waste management: a case study of Metro Vancouver’s energy-from-waste controversy

Managing municipal solid waste is a pressing environmental and political concern for Canadian municipalities who bear the primary responsibility for waste management (WM). In 2015, Metro Vancouver’s (MV’s) plans to expand their capacity to expand their WM capacity with energy-from-waste technology was abandoned, despite shrinking landfill space and persistent public opposition to new landfills. Using Bulkeley et al.’s [(2005). Governing municipal waste: towards a new analytical framework. Journal of Environmental Policy and Planning, 7(1), 1–23. doi:10.1080/15239080500251700] ‘modes of governing framework’, we analyse MV’s failed attempt to expand their energy-from-waste capacity to better understand the challenges associated with governing WM in Canada. We argue that a history of downloading responsibility for WM to municipalities, regional districts, and industry has fragmented WM governance, posing a challenge for developing new waste infrastructure. We find that this localization of responsibility is incompatible with contemporary WM challenges. The scalar mismatch between waste’s material impacts and the scale at which waste is managed has resulted in co-dependence and conflict between putatively independent municipalities, regional districts, and private companies. This inhibits higher-level WM coordination while the autonomy of individual municipalities is simultaneously undermined.     

Recycling in the USA : Vision and reality

In 1978 the US Environmental Protection Agency contracted Mathtech Incorporated to identify the impediments to recycling and evaluate their economic effects. The facilities studied represented a cross-section of recycling technologies, ownership types, geographical locations, and recovered products. It was discovered that none of the facilities was economical in the sense of providing the least-cost mode of disposal for municipal solid waste, and all of them suffered net losses in recent operations. Indications were that financial performance would improve slightly. A major deterrent to economical operations was the availability of lower-cost disposal by landfill.