毛白杨静态压缩力学性能研究及吸能分析

目的 获取毛白杨的静态压缩力学性能.方法 针对含水率为14.6％,密度为0.544 g/cm3的毛白杨木材试件进行静态压缩实验,通过实验获得毛白杨顺纹、横纹径向和横纹弦向的抗压模量、准静态压缩应力-应变曲线,并对不同方向的吸能特性进行分析.结果 毛白杨木材顺纹、横纹径向和横纹弦向抗压弹性模量分别为10.49 GPa、887和504 MPa;顺纹方向加载试件破坏形式表现为轴向屈曲,横纹径向为沿径向的裂纹及破坏,横纹弦向的破坏模式则为沿木纹纤维间的分离破坏.结论 在相同变形(应变相等)情况下,毛白杨木材单位体积吸能沿顺纹方向压缩吸收的能量最大.在应变小于0.45情况下,横纹径向和弦向压缩吸能曲线基本重合,随着应变继续增加,横纹弦向压缩吸能略大于横纹径向压缩吸能.     

包装装备跌落撞击缓冲特性分析

目的 获得尺寸和质量最小的缓冲结构.方法 基于能量守恒原理,建立包装装备缓冲结构撞击环境缓冲特性理论分析的数学模型,获得正撞和侧撞工况下缓冲结构尺寸和防护效果的变化关系.研究采用新型泡沫填充蜂窝材料的缓冲结构设计,优选泡沫填充蜂窝材料参数.建立缓冲结构撞击环境的物质点法计算模型,开展高速撞击的数值仿真.分析包装装备在撞击环境下的吸能效果,获得被保护产品的速度变化曲线.结果 在不同撞击姿态的撞击环境下,缓冲结构尺寸随撞击能量的增大而增大,缓冲材料密度减小和平台应力增大可减小缓冲结构尺寸.优选密度为600 kg/m3的泡沫填充蜂窝材料,可使得缓冲结构尺寸和质量最小,相比于传统木材,可降低质量约49％.物质点数值计算分析验证了该缓冲结构可将高速撞击速度降低到目标低速撞击水平.结论 采用泡沫铝填充蜂窝吸能材料的缓冲结构,满足撞击环境缓冲防护的安全性需求,可大幅降低整体质量.     

聚氨酯缓冲材料在2种典型环境下的耐候性研究

目的 研究聚氨酯缓冲材料在湿热海洋和干热沙漠环境下的老化性能。方法 将3种不同表观密度的聚氨酯缓冲材料在万宁和敦煌试验站进行1 a的自然环境试验,探究聚氨酯缓冲材料外观、静态压缩性能、压缩永久变形性能和红外光谱的变化。结果 在1 a的自然环境试验中,材料压缩强度先增大后降低,压缩永久变形逐渐增大;在万宁试验站,样品表面出现发霉现象,密度为25、30、40 kg/m³的聚氨酯缓冲材料的压缩强度分别增大或衰减至106.4%、93.3%、87.5%,压缩永久变形分别增大109%、98%、138%;在敦煌试验站,密度为25、30、40 kg/m³的聚氨酯缓冲材料的压缩强度分别增大或衰减至106.4%、98.2%、97.8%,压缩永久变形分别增大55%、74%、93%。结论 聚氨酯缓冲材料在自然环境中会发生水解和热氧降解等老化反应,使材料性能出现下降。材料表观密度越大,性能衰减越快。材料对于湿热海洋环境更敏感,在万宁站的老化程度大于敦煌站。     

Fe-20Mn-4Si-2Al高锰钢热加工性能研究

目的研究Fe-20Mn-4Si-2Al高锰钢在850~1050℃,不同应变速率条件下的热变形行为。方法将实验钢锭热轧成10 mm厚板材,然后取样在MMS-300多功能热模式试验机上进行单轴热压缩实验。根据获取的应力-应变曲线及微观组织演变规律,系统研究Fe-Mn-Si-Al系高锰钢的热变形行为。结果应变速率是影响Fe-Mn-Si-Al系高锰钢热变形行为的关键因素。在热变形过程中,应变速率越低,Fe-20Mn-4Si-2Al高锰钢越容易发生动态再结晶。获得了实验钢的表观应力指数n=3.10,热变形激活能Q=412.151 kJ/mol,并建立了热加工方程。结论当参数Z≤8.351×10~(17)时,Fe-20Mn-4Si-2Al高锰钢热加工性能较好。     

镦粗过程中塑性变形的发生和发展

塑性变形过程中,变形区不同位置处的点具有不同的应力状态,且同一点在塑性变形过程中的不同时刻,其应力状态也不相同.应力状态的变化必然造成弱区(或相对的弱区)位置的变化.因而变形发生的部位也是不断变化的.通过数值模拟,从等效应变和等效应变率两个方面,对镦粗过程中塑性变形的发生和发展进行了研究.     

EPS轻量土的力学性质试验研究

在分析轻量土的抗剪机理的基础上,通过固结不排水三轴压缩试验,研究了轻量土的应力-应变变化规律以及水泥掺入比对其变形模量的影响,得到了EPS轻量土的破坏准则和抗剪强度特性.     

软木材料力学行为及其缓冲吸能特性研究进展综述

综述了软木材料的力学行为及其缓冲吸能特性方面的研究进展,首先从密度、含水率、温度、构造与缺陷、服役时间等方面阐述了不同因素对木材力学性能的影响.然后从宏观观测和微细观分析两方面概述了软木材料力学性能试验的研究进展,从宏观本构模型和细观模拟方面阐述了数值仿真分析进展,并简述了理论建模方面的研究成果.最后从多方面给出了未来相关工作的一些建议.     

某型橡胶减振器的加速老化寿命试验研究

目的对某型橡胶减振器进行加速老化试验研究,利用试验数据评估得到产品的贮存寿命。方法采用恒定应力加速试验方法,分四个温度应力量级,对橡胶减振器的压缩永久变形试样开展加速老化试验,获得试样的退化数据。对试验数据进行分析计算,评估得到橡胶减振器材料的贮存寿命。结果通过评估,得到该型减振器材料的贮存寿命能够达到12.36年,置信度大于0.99。同时利用减振器真实产品的老化试验验证了寿命评估结果。结论以温度为敏感应力,采用恒定应力加速贮存试验方法,可以在短时间内快速获得置信度较高的材料常温贮存寿命,结合真实产品验证评估结果,为类似产品的寿命预测提供支撑。     

热空气作用下FM-2D橡胶材料老化本构模型研究

目的 建立热空气作用下氟醚-2D(FM-2D)橡胶材料的老化本构模型,形成老化作用下橡胶材料力学响应分析方法,为准确评估橡胶密封件使用寿命提供依据。方法 探究热空气作用下FM-2D橡胶材料老化机理,基于连续介质有限变形理论框架,采用热力学耗散势函数法,引入橡胶老化过程的势能函数,据此建立考虑橡胶材料老化的超弹性本构模型,基于橡胶老化试验,完成本构模型参数标定,实现老化作用下橡胶力学响应的预测。结果 建立了热空气作用下橡胶材料的老化本构模型,依据老化试验数据标定模型参数,分析了热空气作用下橡胶材料本构模型的可靠性。结论 建立的热空气作用下橡胶材料的老化本构模型可准确预测橡胶随老化时间演变的力学响应,有效模拟了橡胶材料的老化过程。     

基于有限元分析的橡胶减振器优化设计

目的加快橡胶减振器的设计过程。方法分析橡胶材料及Mooney-Rivllin橡胶本构模型特点,介绍橡胶减振器应用特点及隔振设计的相关理论,采用Mooney-Rivllin模型模拟橡胶材料的力学特性,通过引进有限元优化技术,在设计初期保证减振器的刚度特性。结果在某设备减振设计中,采用单轴拉压曲线获取了橡胶材料的Mooney-Rivllin模型参数,以减振器的部分结构尺寸为设计参数,减振器的三向刚度为设计目标,获取了三轴向频率近似相等的隔振系统(轴向频率40 Hz、径向频率40.9 Hz)。通过试验测试,减振系统频率与试验值差别较小,其中轴向差别为2%,径向差别为1%。结论通过引进有限元优化技术,采用合理的橡胶本构模型,可以满足工程精度要求,加速了橡胶减振器的设计过程。     

Effects of two sludge application on fractionation and phytotoxicity of zinc and copper in the soil

The potential harm of heavy metals is a primary concern in application of sludge to the agricultural land. A pot experiment was conducted to evaluate the effect of two sludges on fractionation of Zn and Cu in soil and their phytotoxicity to pakchoi. The loamy soil was mixed with 0%, 20%, 40%, 60% and 80% (by weight) of digested sewage sludge (SS) and composted sludge (SC). The additions of both sludges caused a significant raise in all fractions, resulting in that exchangeable (EXCH) and organic bound (OM) became predominance of Zn and organic bound Cu occupied the largest portion. There was more available amount of Zn and Cu in SS treatments than SC treatments. During the pot experiment, the concentration of Zn in EXCH, carbonate (CAR) and OM and Cu in EXCH and OM fractions decreased in all treatments, so their bioavailability reduced. Germination rate and plant biomass decreased when the addition rate was high and the best yield appeared in 20% mixtures at the harvest of pakchoi. The two sludges increased tissue contents of Zn and Cu especially in the SS treatments. Zn in pakchoi was not only in relationship to ΔEXCH and ΔCAR forms but also in ΔOM forms in the sludge-soil mixtures. Tissue content of Cu in pakchoi grown on SC-soils could not be predicted by ΔEXCH. These correlation rates between Zn and Cu accumulation in pakchoi and variation of different fractions increased with time, which might indicate that sludges represented stronger impacts on the plant in long-term land application.     

Intraspecific differences in effects of co-contamination of cadmium and

A hydroponic experiment was carried out to study intraspecific differences in the effects of different concentrations of cadmium (Cd)(0-10 mg/L) and arsenate (As(V)) (0-8 mg/L) on the growth parameters and accumulation of Cd and As in six wheat varieties Jing-9428, Duokang-1, Jingdong-11, Jing-411, Jingdong-8 and Zhongmai-8. The endpoints of wheat seedlings, including seed germination,biomass, root length and shoot height, decreased with increasing the Cd and As concentrations. Significant differences in seed germination, biomass, root length, shoot height and the accumulation of Cd and As were observed between the treatments and among the varieties (p ＜ 0.05). The lethal dosage 50% were about 20, 80, 60, 60, 80 and 20 mg As/L for Jing-9428, Duokang-1, Jingdong-11,Jing-411, Jingdong-8 and Zhongmai-8, respectively, and the corresponding values for Cd were about 30, 80, 20, 40, 60 and 10 mg Cd/L, respectively. Among the six varieties, Duokang-1 was found to be the most resistant to Cd and As toxicity, and Zhongmai-8 was the most sensitive to Cd and As co-contamination. The resistance of the six varieties was found dependant on the seedling uptake of Cd and As. Duokang-1 was the most suitable for cultivation in Cd and As co-contaminated soils.     

Toxic effects of acetochlor, methamidophos and their combination on nifH gene in soil

Toxic effects of two agrochemicals on nifH gene in agricultural black soil were investigated using denaturing gradient gel electrophoresis （DGGE） and sequencing approaches in a microcosm experiment. Changes of soil nifH gene diversity and composition were examined following the application of acetochlor, methamidophos and their combination. Acetochlor reduced the nifH gene diversity （both in gene richness and diversity index values） and caused changes in the nifH gene composition. The effects of acetochlor on nifH gene were strengthened as the concentration of acetochlor increased. Cluster analysis of DGGE banding patterns showed that nifH gene composition which had been affected by low concentration of acetochlor （50 mg/kg） recovered firstly. Methamidophos reduced nifH gene richness that except at 4 weeks. The medium concentration of methamidophos （150 mg/kg） caused the most apparent changes in nifH gene diversity at the first week while the high concentration of methamidophos （250 mg/kg） produced prominent effects on nifH gene diversity in the following weeks. Cluster analysis showed that minimal changes of nifH gene composition were found at 1 week and maximal changes at 4 weeks. Toxic effects of acetochlor and methamidophos combination on nifH gene were also apparent. Different nifH genes （bands） responded differently to the impact of agrochemicals： four individual bands were eliminated by the application of the agrochemicals, five bands became predominant by the stimulation of the agrochemicals, and four bands showed strong resistance to the influence of the agrochemicals. Fifteen prominent bands were partially sequenced, yielding 15 different nifH sequences, which were used for phylogenetic reconstructions. All sequences were affiliated with the alpha- and beta-proteobacteria, showing higher similarity to eight different diazotrophic genera.     

Arsenic uptake by arbuscular mycorrhizal maize （Zea mays L.） grown in an arsenic-contaminated soil with added phosphorus

The effects of arbuscular mycorrhizal (AM) fungus (Glomus mosseae) and phosphorus (P) addition (100 mg/kg soil) on arsenic (As) uptake by maize plants (Zea mays L.) from an As-contaminated soil were examined in a glasshouse experiment.Non-mycorrhizal and zero-P addition controls were included.Plant biomass and concentrations and uptake of As,P,and other nutrients,AM colonization,root lengths,and hyphal length densities were determined.The results indicated that addition of P significantly inhibited root colonization and development of extraradical mycelium.Root length and dry weight both increased markedly with mycorrhizal colonization under the zero-P treatments,but shoot and root biomass of AM plants was depressed by P application.AM fungal inoculation decreased shoot As concentrations when no P was added,and shoot and root As concentrations of AM plants increased 2.6 and 1.4 times with P addition,respectively.Shoot and root uptake of P,Mn,Cu,and Zn increased,but shoot Fe uptake decreased by 44.6%,with inoculation, when P was added.P addition reduced shoot P,Fe,Mn,Cu,and Zn uptake of AM plants,but increased root Fe and Mn uptake of the nonmycorrhizal ones.AM colonization therefore appeared to enhance plant tolerance to As in low P soil,and have some potential for the phytostabilization of As-contaminated soil,however,P application may introduce additional environmental risk by increasing soil As mobility.     

Degradation of metabolites accumulated of benzo[a]pyrene by coupling Penicillium Chrysogenum with KMnO4

Several main metabolites of benzo[a]pyrene （BaP） formed by Penicillium chrysogenum, Benzo[a]pyrene-1,6-quinone （BP 1,6- quinone）, trans-7,8-dihydroxy-7,8-dihydrobenzo[a]pyrene （BP 7,8-diol）, 3-hydroxybenzo[a]pyrene （3-OHBP）, were identified by high-performance liquid chromatography （HPLC）. The three metabolites were liable to be accumulated and were hardly further metabolized because of their toxicity to microorganisms. However, their further degradation was essential for the complete degradation of BaP. To enhance their degradation, two methods, degradation by coupling Penicillium chrysogenum with KMnO4 and degradation only by Penicillium chrysogenum, were compared; Meanwhile, the parameters of degradation in the superior method were optimized. The results showed that （1） the method of coupling Penicillium chrysogenum with KMnO4 was better and was the first method to be used in the degradation of BaP and its metabolites; （2） the metabolite, BP 1,6-quinone was the most liable to be accumulated in pure cultures; （3） the effect of degradation was the best when the concentration of KMnO4 in the cultures was 0.01% （w/v）, concentration of the three compounds was 5 mg/L and pH was 6.2. Based on the experimental results, a novel concept with regard to the bioremediation of BaP-contaminated environment was discussed, considering the influence on environmental toxicity of the accumulated metabolites.     

Impact of atrazine and nitrogen fertilizers on the sorption of chlorotoluron in soil and model sorbents

Sorption of chlorotoluron in ammonium sulfate, urea and atrazine multi-solutes system was investigated by batch experiments. The results showed application of nitrogen fertilizers to the soil could affect the behavior of chlorotoluron. At the same concentration of N, sorption of chlorotoluron decreased as the concentration of atrazine increased on the day 0 and 6 in soil, respectively. The sorption of chlorotoluron increased from 0 to 6 d when soils were preincubated with deionized water, ammonium sulfate and urea solution for 6 d. That indicated incubation time was one of the most important factors for the sorption of chlorotoluron in nitrogen fertilizers treatments. The individual sorption isotherms of chlorotoluron in rubbery polymer and silica were strictly linear in single solute system, but there were competition sorption between pesticides or between pesticides and nitrogen fertilizers. That indicated the sorption taken place by concurrent solid-phase dissolution mechanism and sorption on the interface of water-organic matter or water-mineral matter.     

Distribution and ecological effect of mercury in Laogang landfill, Shanghai, China

Laogang landfill near Shanghai is the largest landfill in China, and receives about 10000 t of daily garbage per day, Samples of topsoil and plants were analyzed to evaluate mercury pollution from the landfill. For topsoil samples, there were significant correlations among total mercury （HgT）, combinative mercury （Hgc） and gaseous mercury （HgG）, and content of total organic carbon （TOC）, but, no significantly relationship was found between Hg content and filling time. Hg content changes in vertical profiles with time showed that the average Hgv of profiles 1992, 1996, and 2000 was similar, but their average HgG was quite different. HgT was significantly correlated with Hgc in profile 1992 and 2000, and Hgv was significantly correlated with Hg6 in profile 1996. HgG/Hgv ratio in profile samples decreased in the order of （HgG,/HgT）1992〉（HgG/HgT）1996〉〉（HgG/HgT）2000. A simple outline of Hg release in landfill could be drawn： with increasing of filling time, degradation undergoes different biodegradation, accordingly, gaseous mercury goes through small, more, and small proportion to total mercury. Distribution of Hg in plants was inhomogeneous, following the order of leaf〉root〉stem. The highest value of leaf may be associated with higher atmospheric Hg from landfill. Ligneous plants （e.g. Phyllostachys glanca, Prunus salicina and Ligustrum lucidum） are capable of enriching more Hg than herbaceous plants.     

EDTA-enhanced phytoremediation of lead contaminated soil by Bidens maximowicziana

Phytoremediation is a potential cleanup technology for the removal of heavy metals from contaminated soils.Bidens maximowicziana is a new Pb hyperaccumulator,which not only has remarkable tolerance to Pb but also extraordinary accumulation capacity for Pb.The maximum Pb concentration was 1509.3 mg/kg in roots and 2164.7 mg/kg in overground tissues.The Pb distribution order in the B. maximowicziana was:leaf>stem>root.The effect of amendments on phytoremediation was also studied.The mobility of soil Pb and the Pb concentrations in plants were both increased by EDTA application.Compared with CK(control check),EDTA application promoted translocation of Pb to overground parts of the plant.The Pb concentrations in overground parts of plants was increased from 24.23-680.56 mg/kg to 29.07-1905.57 mg/kg.This research demonstrated that B.maximowicziana appeared to be suitable for phytoremediation of Pb contaminated soil,especially,combination with EDTA.     

Potential of plant polyphenol oxidases in the decolorization and removal of textile and non-textile dyes

In this study an effort has been made to use plant polyphenol oxidases; potato （Solanum tuberosum） and brinjal （Solanum melongena）, for the treatment of various important dyes used in textile and other industries. The ammonium sulphate fractionated enzyme preparations were used to treat a number of dyes under various experimental conditions. Majority of the treated dyes were maximally decolorized at pH 3.0. Some of the dyes were quickly decolorized whereas others were marginally decolorized. The initial first hour was sufficient for the maximum decolorization of dyes. The rate of decolorization was quite slow on long treatment of dyes. Enhancement in the dye decolorization was noticed on increasing the concentration of enzymes. The complex mixtures of dyes were treated with both preparations of polyphenol oxidases in the buffers of varying pH values. Potato polyphenol oxidase was significantly more effective in decolorizing the dyes to higher extent as compared to the enzyme obtained from brinjal polyphenol oxidase. Decolorization of dyes and their mixtures, followed by the formation of an insoluble precipitate, which could be easily removed simply by centrifugation.     

Decomposition of alachlor by ozonation and its mechanism

Decomposition and corresponding mechanism of alachlor, an endocrine disruptor in water by ozonation were investigated. Results showed that alachlor could not be completely mineralized by ozone alone. Many intermediates and final products were formed during the process, including aromatic compounds, aliphatic carboxylic acids, and inorganic ions. In evoluting these products, some of them with weak polarity were qualitatively identified by GC-MS. The information of inorganic ions suggested that the dechlorination was the first and the fastest step in the ozonation of alachlor.