Real-world fuel efficiency and exhaust emissions of light-duty diesel vehicles and their correlation with road conditions

The real-world fuel efficiency and exhaust emission profiles of CO, HC and NO_x for light-duty diesel vehicles were investigated. Using a portable emissions measurement system, 16 diesel taxies were tested on different roads in Macao and the data were normalized with the vehicle specific power bin method. The 11 Toyota Corolla diesel taxies have very good fuel economy of (5.9 ± 0.6) L/100 km, while other five diesel taxies showed relatively high values at (8.5 ± 1.7) L/100 km due to the variation in transmission systems and emission control strategies. Compared to similar Corolla gasoline models, the diesel cars confirmed an advantage of ca. 20% higher fuel efficiency. HC and CO emissions of all the 16 taxies are quite low, with the average at (0.05 ± 0.02) g/km and (0.38 ± 0.15) g/km, respectively. The average NO_x emission factor of the 11 Corolla taxies is (0.56 ± 0.17) g/km, about three times higher than their gasoline counterparts. Two of the three Hyundai Sonata taxies, configured with exhaust gas recirculation (EGR) + diesel oxidation catalyst (DOC) emission control strategies, indicated significantly higher NO₂ emissions and NO₂/NO_x ratios than other diesel taxies and consequently trigger a concern of possibly adverse impacts on ozone pollution in urban areas with this technology combination. A clear and similar pattern for fuel consumption and for each of the three gaseous pollutant emissions with various road conditions was identified. To save energy and mitigate CO₂ emissions as well as other gaseous pollutant emissions in urban area, traffic planning also needs improvement.     

乌鲁木齐市城区机动车大气污染物排放特征

对乌鲁木齐市城区车辆信息(包括车流量和车辆构成、车辆控制技术水平、车辆行驶工况、车辆启动分布等)进行调研和测试,并根据IVE模型计算得到机动车污染物排放清单,获得分车型、燃料类型及启动/运行方式的机动车污染物排放分担率.结果表明:2011年乌鲁木齐市机动车CO、NO_x、HC和PM的排放量分别为20.22×104、2.60×104、1.84×104和0.44×10~4t·a~(-1),机动车污染物排放分担率差别显著,乘用车、公交车和重型货车是CO和HC主要排放源;重型货车和乘用车是NO_x的主要排放源;重型货车是PM的主要排放源.汽油车是CO和HC排放的主要来源,柴油车是NO_x和PM排放的主要来源,天然气车各类污染物排放量均较低.控制柴油重型货车是消减机动车污染物排放的重要方式.     

城市汽车年检碳排放数据挖掘及其应用研究

基于城市汽车年检中CO₂的过程动态检测数据,对小型汽油客车CO₂的排放因子和排放水平信息进行了挖掘,并与文献研究结果进行了对比.结果表明,从城市汽车年检数据中挖掘的CO₂排放结果可以作为研究城市机动车碳排放的重要参考依据;合理有效地利用汽车年检数据可以为城市车辆尾气排放的精准分级管控、城市交通运输碳排放达峰的量化分析,以及城市交通源的污染物和CO₂协同减排提供重要的数据支撑;从国Ⅰ到国Ⅴ不同排放阶段汽油车的常规污染物CO、NO_x和HC的排放水平下降非常明显,而对应的CO₂排放水平差异不大;CO₂排放因子随累计行驶里程、车龄、基准质量和排量的变化关系反映出,如果需要削减城市汽车碳排放水平,应鼓励使用基准质量小或者排量小的车辆,淘汰高油耗高排放的老旧车辆,鼓励公共绿色出行而降低单车活动水平,增加纯电动车辆优化车队能源结构.     

On-board measurement of emissions from liquefied petroleum gas, gasoline and diesel powered passenger cars in Algeria

On-board measurements of unit emissions of CO,HC,NOx and CO2 were conducted on 17 private cars powered by different types of fuels including gasoline,dual gasoline–liquefied petroleum gas(LPG),gasoline,and diesel. The tests performed revealed the effect of LPG injection technology on unit emissions and made it possible to compare the measured emissions to the European Artemis emission model. A sequential multipoint injection LPG kit with no catalyst installed was found to be the most efficient pollutant reduction device for all of the pollutants,with the exception of the NOx. Specific test results for a sub-group of LPG vehicles revealed that LPG-fueled engines with no catalyst cannot compete with catalyzed gasoline and diesel engines. Vehicle age does not appear to be a determining parameter with regard to vehicle pollutant emissions. A fuel switch to LPG offers many advantages as far as pollutant emissions are concerned,due to LPG's intrinsic characteristics.However,these advantages are being rapidly offset by the strong development of both gasoline and diesel engine technologies and catalyst converters. The LPG's performance on a chassis dynamometer under real driving conditions was better than expected. The enforcement of pollutant emission standards in developing countries is an important step towards introducing clean technology and reducing vehicle emissions.     

High NO2/NOx emissions downstream of the catalytic diesel particulate filter: An influencing factor study

Diesel vehicles are responsible for most of the traffic-related nitrogen oxide (NO_x) emissions, including nitric oxide (NO) and nitrogen dioxide (NO₂). The use of after-treatment devices increases the risk of high NO₂/NO_x emissions from diesel engines. In order to investigate the factors influencing NO₂/NO_x emissions, an emission experiment was carried out on a high pressure common-rail, turbocharged diesel engine with a catalytic diesel particulate filter (CDPF). NO₂ was measured by a non-dispersive ultraviolet analyzer with raw exhaust sampling. The experimental results show that the NO₂/NO_x ratios downstream of the CDPF range around 20%–83%, which are significantly higher than those upstream of the CDPF. The exhaust temperature is a decisive factor influencing the NO₂/NO_x emissions. The maximum NO₂/NO_x emission appears at the exhaust temperature of 350°C. The space velocity, engine-out PM/NO_x ratio (mass based) and CO conversion ratio are secondary factors. At a constant exhaust temperature, the NO₂/NO_x emissions decreased with increasing space velocity and engine-out PM/NO_x ratio. When the CO conversion ratios range from 80% to 90%, the NO₂/NO_x emissions remain at a high level.     

辽宁省2000~2030年机动车排放清单及情景分析

机动车排放已经成为城市地区大气污染的主要来源.基于COPERT模型和ArcGIS技术,建立了2000~2030年辽宁省机动车排放清单,分析6类污染物（CO、NMVOC、NO_x、PM₁₀、SO₂和CO₂）排放的总体趋势与空间演变特征,同时以2016年为基准年,基于情景分析法设置8类控制措施情景并评估不同控制措施对污染物的减排效果.结果表明2000~2016年,机动车的CO、NMVOC、NO_x和PM₁₀排放量呈现先增后降的趋势,SO₂排放量呈现波动变化,而CO₂排放量则呈现持续增长态势.轻型载客车和摩托车是CO和NMVOC排放的主要贡献车型,重型载客车和重型载货车是NO_x和PM₁₀的主要排放源,SO₂和CO₂则主要是由轻型载客车排放.辽宁省中部及南部机动车排放量明显高于辽东和辽西.从城市层面来看,排放主要集中在沈阳市和大连市.情景分析表明,实施更加严格的排放标准可以增强减排效果,且升级排放标准的时间越提前减排效果越好.综合情景将实现减排最大化,强化综合情景对CO、NMVOC、NO_x、PM₁₀、CO₂和SO₂的削减率达到了30.7%、14.3%、81.7%、29.4%、12.3%和12.1%.     

Characterization of particulate matter from diesel passenger cars tested on chassis dynamometers

Emission characterization of particle number as well as particle mass from three diesel passenger cars equipped with diesel particulate filter(DPF), diesel oxidation catalyst(DOC)and exhaust gas recirculation(EGR) under the vehicle driving cycles and regulatory cycle.Total particle number emissions(PNEs) decreased gradually during speed-up of vehicle from 17.3 to 97.3 km/hr. As the average vehicle speed increases, the size-segregated peak of particle number concentration shifts to smaller size ranges of particles. The correlation analysis with various particulate components such as particle number concentration(PNC),ultrafine particle number concentration(UFPNC) and particulate matter(PM) mass was conducted to compare gaseous compounds(CO, CO_2, HC and NOx). The UFPNC and PM were not only emitted highly in Seoul during severe traffic jam conditions, but also have good correlation with hydrocarbons and NOxinfluencing high potential on secondary aerosol generation. The effect of the dilution temperature on total PNC under the New European Driving Cycle(NEDC), was slightly higher than the dilution ratio. In addition, the nuclei mode(DP: ≤ 13 nm) was confirmed to be more sensitive to the dilution temperature rather than other particle size ranges. Comparison with particle composition between vehicle speed cycles and regulatory cycle showed that sulfate was slightly increased at regulatory cycle, while other components were relatively similar. During cold start test, semivolatile nucleation particles were increased due to effect of cold environment. Research on particle formation dependent on dilution conditions of diesel passenger cars under the NEDC is important to verify impact on vehicular traffic and secondary aerosol formation in Seoul.     

纯电动与柴油货车全生命周期能耗及排放分析

选择传统柴油厢式货车和纯电动厢式货车为研究对象.基于GREET软件,建立适宜于我国国情的车辆全生命周期计算模型,对比分析两款车型全生命周期的能耗、温室气体排放以及标准污染物排放情况;结果表明:纯电动货车全生命周期内的百公里能耗比柴油货车降低了6.57%,化石燃料、天然气、石油的百公里消耗量分别降低14.4%、58.8%、96.8%;纯电动货车CH_4、VOC、CO、NO_x的排放分别比柴油货车低16.7%、14.8%、63.0%和63.4%,而柴油货车的CO_2和SO_x的排放量比纯电动货车低7.2%和96.8%.同时对车辆进行不确定性分析和单因素的敏感性分析发现,纯电动货车全生命周期内CO_2排放量对电能生产阶段的敏感度高达66.9%,而且相较于柴油货车,纯电动货车在全生命周期能耗、一次能源消耗以及主要污染物的排放等方面受车辆寿命的影响较小,在长期运行过程中更能发挥其在节能减排方面的优势.     

轻型柴油车实际道路瞬时排放模拟研究

系统介绍了CMEM模型及其计算原理.以轻型柴油车为研究对象,给出了模型的主要输入参数,并计算了车辆在实际道路上的瞬时排放结果,并根据实测数据对模拟结果进行了验证.测试车辆的CO、THC、NOx和CO2排放因子为0.81、0.61、2.09和193 g·km-1,相同线路模拟所得的排放因子分别为0.75、0.47、2.47和212 g·km-1,相关系数分别达到0.69、0.69、0.75和0.72.通过模拟发现,轻型柴油车在实际道路微观区域内的排放水平随交通条件和行驶状态波动明显,采用CMEM模型能够较好地反映该车排放随行驶工况的瞬时变化趋势.应用CMEM模拟发现,改善典型交叉口区域的交通条件后,轻型柴油车在模拟区域内的CO、THC、NOx和CO2排放量分别削减了50%、47%、45%和44%,排放改善效果显著.从研究结果来看,利用微观尺度模型来分析混合车流在一些典型交通区域的瞬时排放变化是必要的,也是可行的,对于评价道路交通规划的环境效果具有一定的指导意义.     

个人乘用车用可替代燃料与我国未来的选择

个人乘用车排放量占道路交通运输二氧化碳(CO2)排放量的三分之一。因此,逐步实现其燃料由传统石化燃料汽柴油向新能源转变是交通运输行业低碳减排和绿色发展的重要抓手之一。本文对当前可供个人乘用车使用的4大类新能源即生物燃油、燃料乙醇、氢和电的属性,特别是其CO2减排效果和使用成本进行了分析和对比,并对新能源加注(充电)设施在欧盟和美国的布局战略和实施成果进行了介绍。结合欧美的实践和中国的实际,本文提出了未来个人乘用车用可替代燃油布局的建设,建议我国直接从传统石化汽油跨越至氢和/或电,并将其作为未来个人乘用车的燃料。     

中国分省道路交通二氧化碳排放因子

基于本地化的综合移动源排放模型（Motor Vehicle Emission Simulator,MOVES）模型模拟典型机动车的CO₂排放因子,并建立排放因子与速度变化关系的评估方程,结合各省路网平均速度与区域电网排放因子核算中国31个省份分车型的CO₂排放因子.同时,综合考虑载客汽车的载客量和客座率,载货汽车的载重量和载货率,建立各省单位客运,货运周转量的机动车CO₂排放因子库.结果表明,各类机动车的平均CO₂排放因子分别为：柴油公交车0.880kgCO₂/km,重型货车0.877kgCO₂/km,电动公交车0.676kgCO₂/km,中型货车0.508kgCO₂/km,轻型货车0.374kgCO₂/km,柴油小客车0.227kgCO₂/km,微型货车0.216kgCO₂/km,汽油小客车0.203kgCO₂/km,电动小客车0.108kgCO₂/km,摩托车0.062kgCO₂/km.车辆满载时,柴油公交车和电动公交车的人均CO₂排放量比汽油小客车分别降低了63%和73%,电动小客车的人均CO₂排放量较汽油和柴油小客车分别下降了46%和51%.较高的机动车保有量,频繁的道路拥堵导致上海,北京和重庆等市的机动车CO₂排放因子相对较高.倡导公共交通,提高客座率,降低私家车使用频率,推广纯电动汽车并通过减少道路拥堵以提高车速是降低道路交通CO₂排放量的有效途径.     

杭州市机动车NO_x排放清单的建立及其对空气质量的影响

以杭州市主城区为例,对车辆信息(包括车流量和车辆构成、车辆控制技术水平、车辆行驶工况、车辆启动分布等)进行了调研和测试,并根据IVE模型计算了机动车NOx的排放清单.结果表明,2004年杭州市主城区机动车NOx排放总量为25 100 t,其中,轻型客车、出租车、公交车、重型货车和轻型货车的年排放量分别为5 800,1 100,7 300,9 200和1 700 t.在此基础上,通过AERMOD模型模拟了城市机动车源NOx年均质量浓度以及城市空气中总的NOx年均质量浓度空间分布,得出机动车排放的NOx对总的NOx年均质量浓度的贡献率为40.91%,并对贡献率的空间分布进行了分析.     

柴油轿车颗粒多环芳烃的排放特性

以一辆柴油轿车为研究样车,分别使用纯柴油、生物柴油掺混比例为10%的B10燃油,进行了NEDC整车循环工况试验,测取了该车HC、CO、NOx、颗粒等法规限制的排放,利用气相色谱-质谱法对采集的排气颗粒样品进行了分析,重点研究了颗粒中多环芳烃的排放特性.结果表明,与柴油相比,燃用B10燃油的HC、CO、NOx和颗粒等常规排放均有所降低;两种燃料产生的颗粒多环芳烃排放中均以荧蒽和芘最多,与纯柴油相比,燃用B10燃油产生的低环数PAHs排放略有增加,中高环数的PAHs排放降幅明显.苯并[a]芘等效毒性分析结果显示燃用B10燃油的BEQs值比纯柴油降低了21.6%,表明柴油轿车燃用生物柴油后,排气颗粒的多环芳烃毒性有所下降.     

Can a prolonged use of a passenger car reduce environmental burdens? Life Cycle analysis of Swiss passenger cars

As a consequence of the introduction of limits on exhaust gas emissions and a target agreement between the Swiss association of car importers (auto-schweiz) and the Swiss government calling for a reduction in the specific fuel consumption, a considerable reduction of exhaust emissions of newly registered Swiss passenger cars occurred in the last 10 years. Also, for the near future an ongoing reduction of exhaust emissions of newly registered vehicles is expected. However, applying the concept of life cycle thinking, exhaust emission reductions may be outbalanced with an increase in specific car manufacturing expenditures and/or a longer use of the car. Thus, from the point of view of an individual car owner, a prolonged car use may be the environmentally preferable option. In order to investigate this question, a comprehensive analysis of the environmental performance of newly registered diesel and petrol passenger cars in the time period from 2000 to 2010 has been performed. Life Cycle Assessment (LCA) has been employed focusing on three transport components: ‘vehicle travel’ (exhaust and abrasion emissions), ‘fuel chain’ (supply of fuels) and ‘car infrastructure’ (manufacturing, maintenance and disposal of cars). The presented model aims to gain insight into the issue of longevity and prolonged car use for the Swiss case, rather than giving ultimate recommendations. The analysis focuses on classical road pollutants (NO_x and PM2.5) as well as on fuel consumption reduction and CO₂. Moreover, impact assessment has been applied, employing a common approach: Eco-Indicator (EI) 99. The ranking of different car replacement options revealed prolonged car use as the environmentally better option. As a consequence of the continuous use of the car representing 2000 average technology, the components ‘vehicle travel’ and ‘fuel chain’ show a 10% and 9% higher performance, respectively. This effect is compensated by savings in ‘car infrastructure’ (26%). Uncertainty analysis has been performed by additional model runs with different parameter settings. Despite the fact that a considerably prolonged car use scores best for all additional model runs, the resulting differences between options further decrease. This holds particularly true, if a higher yearly average fuel reduction rate of 3% is assumed. Furthermore, applying an avoided burden concept for infrastructure modeling (Value Corrected Substitution (VCS)) shows the same effect. In both cases the resulting scores differ merely marginally between the considered options and would not allow for discrimination.As a consequence of these outcomes, it is not possible to give any general recommendation to Swiss car owners to extend the use of their cars, in the short term.     

中国国道和省道机动车尾气排放特征

近年来,随着我国机动车保有量的持续增长,机动车排放已成为我国重要的大气污染物来源之一.现有的机动车排放研究多关注城市内的机动车大气污染物排放,针对城市间的大气污染物排放研究较少.我国城市间交通道路主要包括国道和省道,截止至2015年我国国道里程18.53万km、省道里程32.97万km,约占全国等级公路总里程的13%,因此开展我国国道和省道机动车大气污染物排放研究十分重要.本研究基于全国国道和省道交通监测站的年均监测数据,采用环境保护部发布的《道路机动车大气污染物排放清单编制技术指南(试行)》中的指导方法,计算了2015年我国国道和省道机动车的大气污染物排放清单,分析了污染物排放的时空分布特征.结果表明,我国国道和省道公路机动车排放的一氧化碳(CO)、氮氧化物(NO_x)、颗粒物(PM)和碳氢化合物(HC)排放量分别占全国机动车污染物总排放量的4.5%、27.9%、14.4%和7.7%;不同车型对国道和省道机动车大气污染物排放的分担率不同,其中大货车是NO_x、PM_(10)、PM_(2.5)的主要来源,摩托车是CO和HC的主要来源;不同道路类型中各车型的大气污染物排放分担率也不同,如高速路上大货车是NO_x、PM_(10)和PM_(2.5)的主要来源,普通道路上大客车和大货车是NO_x、PM_(10)和PM_(2.5)的主要来源.     

基于中国电网结构及一线典型城市车辆出行特征的PHEV二氧化碳排放分析

中国电网火电比例的空间差异与插电式混合动力汽车（PHEV）驱动能源的二元性增加了研究PHEV二氧化碳排放的复杂性.使用上海市50辆PHEV汽车13万km的数据,研究了基于PHEV实际运行数据的二氧化碳排放评估方法,分析了PHEV纯电驱动里程比例及其影响因素,获得了纯电续驶里程、充电频率、电网构成对PHEV二氧化碳排放强度的影响,展望了2020年PHEV技术水平的二氧化碳减排效果.结果表明,我国一线城市PHEV乘用车出行主要集中在50 km以内的范围,占日常出行频次的70%;在2016年全国平均电网结构下,续驶里程超过50 km的PHEV比传统燃油车少排放15%以上的二氧化碳;在高比例可再生能源电网结构的地区,PHEV碳排放可降至100.0 g·km^-1以下,相比平均电网结构下碳排放水平降低幅度在28%以上;在2016年平均电网结构及技术水平下,纯电续驶里程增加（50~100 km）、充电频率增加（0.5~2次·d^-1）对碳排放的改善幅度不明显;与2016年相比,2020年PHEV燃油经济性和电耗水平的改善可降低32%的碳排放.     

基于LEAP模型的兰州市道路交通温室气体与污染物协同减排情景模拟

基于LEAP模型,构建了2015～2040年兰州市道路交通发展“零措施”的基准（BAU）情景以及低碳（LC）和强化低碳（ELC）这2个节能减排情景,模拟评估各项政策和措施下能源消耗情况和温室气体与大气污染物协同减排效果.结果表明,LC情景能源消耗和CO₂排放将于2026年达峰,ELC情景能源消耗和CO₂排放将于2020年达峰;两种情景下,NO_x、 CO、 HC、 PM_2.5和PM₁₀等污染物排放量于2015～2017年间开始出现大幅下降,下降趋势于2023年前后逐渐减缓.结合措施可行性和减排成本,LC情景可作为兰州市道路交通碳达峰减排情景：到2040年能源消耗量、 CO₂、 NO_x、 CO、 HC、 PM_2.5和PM₁₀排放相对于BAU情景的削减率分别达到-24.17%、-26.57%、-55.38%、-65.91%、-72.87%、-76.66%和-77.18%.兰州市道路交通当前应以公共...     

基于远程在线监控车载终端的柴油车NOx排放等级诊断研究

远程在线监控车载终端集成了远程通讯模块、卫星定位模块、发动机OBD信息解析模块,能够实时读取车辆排放相关运行信息,但无法直接判断车辆NO_x排放情况.为了快速、准确地评估车辆排放情况,诊断和监测NO_x高排放车,同时为了克服有些重型柴油车监测数据中缺失进气流量、燃油流量、车速等重要的实时信息,无法计算出车辆NO_x排放因子的问题.本文提出了由NO_x浓度分布特征驱动的高排放重型柴油车识别算法,通过远程在线监控车载终端设备获取车辆的发动机信息和SCR系统运行信息,运用NO_x浓度分布计算车辆每天NO_x排放浓度占比,通过系统聚类法对车辆NO_x排放浓度占比进行聚类,结果聚为优、良、中、差4类.利用车辆NO_x排放浓度区间分布及其聚类结果分别作为训练集的输入和输出,选择BP神经网络作为训练算法,训练获得的模型分类准确率为90%,利用训练好的模型判断在用柴油车NO_x排放等级,从而识别及监测NO_x高排放车辆.研究结果可为柴油车NO_x高排放诊断及监测提供依据,有助于监管部门能够快速识别NO_x高排放车辆.     

Real-world gaseous emission characteristics of natural gas heavy-duty sanitation trucks

As compared to conventional diesel heavy-duty vehicles, natural gas vehicles have been proved to be more eco-friendly due to their lower production of greenhouse gas and pollutant emissions, which are causing enormous adverse effects on global warming and air pollution. However, natural gas vehicles were rarely studied before, especially through on-road measurements. In this study, a portable emission measurement system (PEMS) was employed to investigate the real-world emissions of nitrogen oxides (NOx) (nitrogen monoxide (NO), nitrogen dioxide (NO₂)), total hydrocarbons (THC), carbon monoxide (CO), and carbon dioxide (CO₂) from two liquified natural gas (LNG) China V heavy-duty cleaning sanitation trucks with different weight. Associated with the more aggressive driving behaviors, the vehicle with lower weight exhibited higher CO₂ (3%) but lower NOx (48.3%) (NO₂ (78.2%) and NO (29.4%)), CO (44.8%), and THC (3.7%) emission factors. Aggressive driving behaviors were also favorable to the production of THC, especially those in the medium-speed range but significantly negative to the production of CO and NO₂, especially those in the low-speed range with high engine load. In particular, the emission rate ratio of NO₂/NO decreased with the increase of speed/scaled tractive power in different speed ranges.     

WLTC循环下汽油车氨排放影响因素分析

为研究WLTC（worldwide light-duty test cycle,全球轻型汽车驾驶循环）循环下常规污染物和行驶工况对汽油车NH₃排放的影响,选定一辆满足国Ⅴ排放标准、配备TWC（three way catalyst,三元催化器）尾气后处理装置的轻型汽油车,测定其在WLTC循环下CO₂、CO、NO_x和NH₃的摩尔排放量.结果表明:CO、NO_x与NH₃排放的线性相关系数分别为0.626和0.321.NH₃高排放的出现除了伴有CO的高排放外,还需车辆具有高速和持续的正向加速度.用配备TWC尾气后处理装置前、后NO_x排放量的差值表示NO_x的转化量发现,NO_x的高转化量并不一定对应NH₃的高排放量,在循环后期大量产生的NO_x会抑制NH₃的排放.由于VSP（vehicle specific power,比功率）能综合反映行驶工况,研究行驶工况对NH₃排放的影响时主要分析VSP与NH₃之间的关系,通过VSP聚类方法将VSP划分为不同区间,得出当VSP Bin（vehicle specific power bin,比功率区间）大于0时,基于CO₂的NH₃排放基本呈随VSP Bin增大而增加的规律,并且基于CO₂的NH₃排放量最大值对应的VSP Bin为持续正向加速工况.研究显示,常规污染物中CO和NO_x对NH₃的排放会产生不同程度的影响,加速度作为行驶工况的表征参数之一会直接或通过影响CO和NO_x的排放间接影响NH₃的生成.