Informal electronic waste recycling: a sector review with special focus on China

Informal recycling is a new and expanding low cost recycling practice in managing Waste Electrical and Electronic Equipment (WEEE or e-waste). It occurs in many developing countries, including China, where current gaps in environmental management, high demand for second-hand electronic appliances and the norm of selling e-waste to individual collectors encourage the growth of a strong informal recycling sector. This paper gathers information on informal e-waste management, takes a look at its particular manifestations in China and identifies some of the main difficulties of the current Chinese approach. Informal e-waste recycling is not only associated with serious environmental and health impacts, but also the supply deficiency of formal recyclers and the safety problems of remanufactured electronic products. Experiences already show that simply prohibiting or competing with the informal collectors and informal recyclers is not an effective solution. New formal e-waste recycling systems should take existing informal sectors into account, and more policies need to be made to improve recycling rates, working conditions and the efficiency of involved informal players. A key issue for China’s e-waste management is how to set up incentives for informal recyclers so as to reduce improper recycling activities and to divert more e-waste flow into the formal recycling sector.     

Electronic waste (e-waste): material flows and management practices in Nigeria

The growth in electrical and electronic equipment (EEE) production and consumption has been exponential in the last two decades. This has been as a result of the rapid changes in equipment features and capabilities, decrease in prices, and the growth in internet use. This creates a large volume of waste stream of obsolete electrical and electronic devices (e-waste) in developed countries. There is high level of trans-boundary movement of these devices as secondhand electronic equipment into developing countries in an attempt to bridge the 'digital divide'. The past decade has witnessed a phenomenal advancement in information and communication technology (ICT) in Nigeria, most of which rely on imported secondhand devices. This paper attempts to review the material flow of secondhand/scrap electronic devices into Nigeria, the current management practices for e-waste and the environmental and health implications of such low-end management practices. Establishment of formal recycling facilities, introduction of legislation dealing specifically with e-waste and the confirmation of the functionality of secondhand EEE prior to importation are some of the options available to the government in dealing with this difficult issue.     

Waste electrical and electronic equipment (WEEE) management in Korea: generation, collection, and recycling systems

In Korea, generation of waste electrical and electronic equipment (WEEE), or electronic waste (e-waste), has rapidly increased in recent years. The management of WEEE has become a major issue of concern for solid waste communities due to the volumes of waste being generated and the potential environmental impacts associated with the toxic chemicals found in most electronic devices. Special attention must be paid when dealing with WEEE because of toxic materials that it contains (e.g., heavy metals, polybrominated diphenyl ethers, phthalates, and polyvinyl chloride). If managed improperly, the disposal of WEEE can adversely affect the environment and human health. Environmental regulatory agencies; electronic equipment manufacturers, retailers, and recyclers; environmental nongovernmental organizations; and many others are much interested in updated statistics with regard to how much WEEE is generated, stored, recycled, and disposed of. In Korea, an extended producer responsibility policy was introduced in 2003 not only to reduce the amount of electronic products requiring disposal, but also to promote resource recovery from WEEE; the policy currently applies to a total of ten electrical and electronic product categories. This article presents an overview of the current recycling practices and management of electrical and electronic waste in Korea. Specifically, the generation rates, recycling systems and processes, and recent regulations of WEEE are discussed. We estimated that 1 263 000 refrigerators, 701 000 washing machines, 1 181 000 televisions, and 109 000 airconditioning units were retired and handled by the WEEE management system in 2006. More than 40% of the products were collected and recycled by producers. Four major producers’ recycling centers and other WEEE recycling facilities are currently in operation, and these process a large faction of WEEE for the recovery of valuable materials. Much attention should still be paid to pollution prevention and resource conservation with respect to WEEE. Several suggestions are made in order to deal with electronic waste management problems effectively and to prevent potential impacts.     

A review of waste prevention through 3R under the concept of circular economy in China

The large waste generation has become one of the worldwide environmental problems. Circular economy has been seen as a way to tackle its urgent problems of environmental degradation and source scarcity. In recent years, under the concepts of circular economy, waste prevention through “Reduce, Reuse and Recycle” (3R) rules have attracted a broad concern in China. China has made some great achievements on waste management, and at the same time is facing many challenges. It is very necessary to share the management experiences and practices with the scholars and managers in other countries. This review covered the current situation and progress of circular economy development from the perspective of the legal regime and project practices, and the recycling practices of typical waste. The typical household wastes, including municipal solid wastes (MSW), e-waste, and end of life vehicles (ELV), were studied as the typical cases. Based on an examination of the statistical results, we also identified the potential problems and challenges for waste prevention through 3R in China. Finally, we provided some effective measures to further improve the waste management and recycling in China.     

Analysis of recycling structures for e-waste in Vietnam

E-waste management in Vietnam poses real challenges such as the lack of specific e-waste legislation, the strong involvement of “craft villages” and the missing of monitoring data. Many issues (e.g., pollution level, generated waste, health of workers and resident living at recycling sites) lead to the limited access to these craft villages. Thus, there is no comprehensive picture on e-waste management in Vietnam available today. This research focuses on the current situation of e-waste management. Sources of e-waste, collection and treatment in Vietnam are investigated by utilizing most available sources of information (published journals, unpublished works from projects and reports from institutes, ministry) together with the interviewed data from experts, collectors, workers and especially, biggest traders in the field. Based on this information, the processes applied in Vietnam, both in the formal and informal sector, have been analyzed systematically in terms of inputs, outputs, potential emissions and related risks for workers. From these aspects, a comparison in terms of legal frameworks, collection and treatment at both formal and informal sector between Vietnam and other countries in Asian region was undertaken. Thus, major challenges of e-waste management and relatively comprehensive image of e-waste management and treatment in Vietnam have been identified.     

Electronic waste management approaches: An overview

Electronic waste (e-waste) is one of the fastest-growing pollution problems worldwide given the presence if a variety of toxic substances which can contaminate the environment and threaten human health, if disposal protocols are not meticulously managed. This paper presents an overview of toxic substances present in e-waste, their potential environmental and human health impacts together with management strategies currently being used in certain countries. Several tools including Life Cycle Assessment (LCA), Material Flow Analysis (MFA), Multi Criteria Analysis (MCA) and Extended Producer Responsibility (EPR) have been developed to manage e-wastes especially in developed countries. The key to success in terms of e-waste management is to develop eco-design devices, properly collect e-waste, recover and recycle material by safe methods, dispose of e-waste by suitable techniques, forbid the transfer of used electronic devices to developing countries, and raise awareness of the impact of e-waste. No single tool is adequate but together they can complement each other to solve this issue. A national scheme such as EPR is a good policy in solving the growing e-waste problems.     

Collection and recycling of electronic scrap: a worldwide overview and comparison with the Brazilian situation

Recycling and the related issue of sustainable development are increasing in importance around the world. In Brazil, the new National Policy on Solid Wastes has prompted discussion on the future of electronic waste (e-waste). Over the last 10 years, different e-waste collection systems and recycling processes have been applied globally. This paper presents the systems used in different countries and compares the world situation to the current Brazilian reality. To establish a recycling process, it is necessary to organize efficient collection management. The main difficulty associated with the implementation of e-waste recycling processes in Brazil is the collection system, as its efficiency depends not only on the education and cooperation of the people but also on cooperation among industrial waste generators, distributors and the government. Over half a million waste pickers have been reported in Brazil and they are responsible for the success of metal scrap collection in the country. The country also has close to 2400 companies and cooperatives involved in recycling and scrap trading. On the other hand, the collection and recycling of e-waste is still incipient because e-wastes are not seen as valuable in the informal sector. The Brazilian challenge is therefore to organize a system of e-waste management including the informal sector without neglecting environmentally sound management principles.     

Electrical and electronic waste management in China: progress and the barriers to overcome.

Serious adverse impacts on the environment and human health from e-waste recycling have occurred in the past and continue to occur in China today, due to a lack of national management strategies. China has made great efforts to face the challenges of the approaching peak increase in the domestic generation of e-waste and the illegal shipment of e-waste from other countries. This study examined recent progress and analysed the main problems associated with this issue in China. It was found that the material and the financial flows of e-waste in China had their own specific characteristics. Nearly 60% of the generated e-wastes were sold to private individual collectors and passed into informal recycling processes. More than 90% of Chinese citizens are reluctant to pay for the recycling of their e-waste. This is due to their traditional understanding that there remained value in these end-of-life products. Regulations concerning e-waste in China have been drafted but their deficiencies are obvious. The extended producer responsibilities (EPR) have been introduced but are not well defined. Eight formal facilities have been planned and are under construction or are in operation along the eastern coast of China but it will be difficult for them to compete with the informal processes for the reasons identified during the study.     

Solid waste collection and recycling in Nibong Tebal, Penang, Malaysia: a case study.

The implementation of a suitable solid waste management programme with appropriate methods of recycling as an inherent element is vital to the alleviation of the problems associated with solid waste generation, handling and disposal, environmental conservation, public hygiene, etc. The present work is a case study on solid waste collection and recycling practices in Nibong Tebal town, Penang, Malaysia. The amount and types of domestic waste generated, household participation in recycling, identification of existing problems related to the implementation of the recycling programme, etc. formed the basis of this study. Surveys (interviews/questionnaires) and on-site observations were conducted to gather information on the solid waste collection and recycling practice of the residents. A focus group of 60 individuals was selected and their response to a questionnaire, prepared according to a Likert scale, was obtained and analysed. The majority of the respondents expressed concerns about recycling and wanted more to be done in this regard. Illegal collection, aesthetically displeasing sites and a lack of public awareness were problems of major concern. Issues related to inadequate funding and manpower as well as end market are also addressed and suggestions made.     

Shared responsibility for managing electronic waste: A case study of Maine,USA

Based on high disposal and low recycling rates of electronic waste (e-waste) and continued exportation to developing countries, reliance on municipal responsibility for e-waste management has been unsuccessful in the United States. This case study examines Maine’s program, which was the first US state to mandate producer responsibility for recycling household e-waste. Maine’s program established a shared cost responsibility among producers, municipalities, and consumers. The study found that Maine’s program resulted in a significant reduction in disposal and a corresponding increase in environmentally sound recycling. In the first 3 years of the program, 6.406 million kg of household e-waste was collected and recycled for a population of 1.32 million. The new program, implemented in 2006, increased the number of e-waste items collected and recycled by 108% in the first year, 170% in the second year, and 221% in the third year. The program decreased direct economic costs to municipalities and households because of the shared cost approach and for the first time established costs for producers. There was no empirical evidence indicating that producers have or will improve the recyclability of electronic products to reduce recycling costs. While other weaknesses were that found potentially limit the adoption of Maine’s program, its positive aspects warrant consideration by other governments.     

A material flow analysis on current electrical and electronic waste disposal from Hong Kong households

A material flow study on five types of household electrical and electronic equipment, namely television, washing machine, air conditioner, refrigerator and personal computer (TWARC) was conducted to assist the Government of Hong Kong to establish an e-waste take-back system. This study is the first systematic attempt on identifying key TWARC waste disposal outlets and trade practices of key parties involved in Hong Kong. Results from two questionnaire surveys, on local households and private e-waste traders, were used to establish the material flow of household TWARC waste. The study revealed that the majority of obsolete TWARC were sold by households to private e-waste collectors and that the current e-waste collection network is efficient and popular with local households. However, about 65,000 tonnes/yr or 80% of household generated TWARC waste are being exported overseas by private e-waste traders, with some believed to be imported into developing countries where crude recycling methods are practiced. Should Hong Kong establish a formal recycling network with tight regulatory control on imports and exports, the potential risks of current e-waste recycling practices on e-waste recycling workers, local residents and the environment can be greatly reduced.     

Leaching standards for mineral recycling materials--a harmonized regulatory concept for the upcoming German Recycling Decree

In this contribution we give a first general overview of results of recent studies in Germany which focused on contaminant leaching from various materials and reactive solute transport in the unsaturated soil zone to identify the key factors for groundwater risk assessment. Based on these results we developed new and improved existing methods for groundwater risk assessment which are used to derive a new regulatory concept for the upcoming “Decree for the Requirements of the Use of Alternative Mineral Building Materials in Technical Constructions and for the Amendment of the Federal Soil Protection and Contaminated Sites Ordinance” of the German Federal Ministry of Environment.The new concept aims at a holistic and scientifically sound assessment of the use of mineral recycling materials (e.g., mineral waste, excavated soils, slag and ashes, recycling products, etc.) in technical constructions (e.g., road dams) and permanent applications (e.g., backfilling and landscaping) which is based on a mechanistic understanding of leaching and transport processes. Fundamental for risk assessment are leaching standards for the mineral recycling materials.For each application of mineral recycling materials specific maximum concentrations of a substance in the seepage water at the bottom of an application were calculated. Technical boundary conditions and policy conventions derived from the “German precautionary groundwater and soil protection policy” were accounted to prevent adverse environmental effects on the media soil and groundwater. This includes the concentration decline of highly soluble substances (e.g., chloride and sulphate), retardation or attenuation of solutes, accumulation of contaminants in sub-soils and the hydraulic properties of recycling materials used for specific applications. To decide whether the use of a mineral recycling material is possible in a specific application, the leaching qualities were evaluated based on column percolation tests with various samples and compared with application-specific maximum concentrations.In the upcoming federal decree this simplified concept is realized using detailed tables which classify the leaching quality of mineral recycling materials and demonstrate potential application. A quality assurance system will be mandatory which defines specific testing programs (material properties and limit concentrations to be tested, number and schedule of testing) for the different mineral recycling materials using standardized methods (column percolation test).     

Options for sustainable industrial waste management toward zero landfill waste in a high-density polyethylene (HDPE) factory in Thailand

The feasibility of the 3R concept tends to increase the reduction, reuse, and recycling of industrial waste. In this study, we investigated the feasibility of 3R methods to cope with industrial waste generated from high-density polyethylene production in Thailand. The sources and types of waste and existing waste management practices were identified. The four sources of waste generation that we identified were: (1) production, (2) packaging, (3) wastewater treatment, and (4) maintenance, distributed as 47, 46, 4, and 3 %, respectively. The main options for management were: sales to recycling plants (60.41 %), reuse and recycling (25.93 %), and industrial-waste landfilling (10.47 %). After 3R options were introduced, the proposed alternatives were found to be capable of reducing the amount of waste by 33.88 %. The results of life-cycle assessment (LCA) were useful for considering the environmental impact where 3R options were adopted. We also found that net greenhouse gas (GHG) emissions and other environmental impacts could be reduced when industrial waste diverted from landfill is used as alternative fuel. However, the cost of waste disposal seems to be the greatest obstacle for the adoption of 3R methods in Thailand.     

Environmental impacts associated with manufacturing of solar and wind power alternative energy systems

The Air Force Center for Engineering and the Environment (AFCEE) is performing Environmental Restoration Program Optimization (E‐RPO) at various United States Air Force (USAF) installations to evaluate existing remediation strategies and recommend actions to advance issues impacting the remediation program. As sustainability practices (including green and sustainable remediation [GSR]) increase at Air Force facilities and throughout the environmental industry, the use of alternative energy‐collection sources (i.e., solar photovoltaics [PV] and wind turbines) is likely to increase dramatically. Although PV and wind power systems exhibit a low environmental footprint during their use, there are potential human health and environmental impacts from the manufacturing and recycling processes. This article presents a summary of available information regarding the environmental impacts associated with life‐cycle assessments that include raw material extraction and refinement, product manufacturing, use, and postuse disposal for PV and wind turbines (i.e., cradle‐to‐grave impacts). © 2010 Wiley Periodicals, Inc.     

Environmental effects of heavy metals derived from the e-waste recycling activities in China: A systematic review

As the world’s leading manufacturing country, China has become the largest dumping ground for e-waste, resulting in serious pollution of heavy metals in China. This study reviews recent studies on environmental effects of heavy metals from the e-waste recycling sites in China, especially Taizhou, Guiyu, and Longtang. The intensive uncontrolled processing of e-waste in China has resulted in the release of large amounts of heavy metals in the local environment, and caused high concentrations of metals to be present in the surrounding air, dust, soils, sediments and plants. Though the pollution of many heavy metals was investigated in the relevant researches, the four kinds of heavy metals (Cu, Pb, Cd and Cr) from e-waste recycling processes attracted more attention. The exceedance of various national and international standards imposed negative effects to the environment, which made the local residents face with the serious heavy metal exposure. In order to protect the environment and human health, there is an urgent need to control and monitor the informal e-waste recycling operations.     

The challenge of electronic waste (e-waste) management in developing countries

Information and telecommunications technology (ICT) and computer Internet networking has penetrated nearly every aspect of modern life, and is positively affecting human life even in the most remote areas of the developing countries. The rapid growth in ICT has led to an improvement in the capacity of computers but simultaneously to a decrease in the products lifetime as a result of which increasingly large quantities of waste electrical and electronic equipment (e-waste) are generated annually. ICT development in most developing countries, particularly in Africa, depends more on secondhand or refurbished EEEs most of which are imported without confirmatory testing for functionality. As a result large quantities of e-waste are presently being managed in these countries. The challenges facing the developing countries in e-waste management include: an absence of infrastructure for appropriate waste management, an absence of legislation dealing specifically with e-waste, an absence of any framework for end-of-life (EoL) product take-back or implementation of extended producer responsibility (EPR). This study examines these issues as they relate to practices in developing countries with emphasis on the prevailing situation in Nigeria. Effective management of e-waste in the developing countries demands the implementation of EPR, the establishment of product reuse through remanufacturing and the introduction of efficient recycling facilities. The implementation of a global system for the standardization and certification/labelling of secondhand appliances intended for export to developing countries will be required to control the export of electronic recyclables (e-scarp) in the name of secondhand appliances.     

Disaster waste management: a review article

Depending on their nature and severity, disasters can create large volumes of debris and waste. The waste can overwhelm existing solid waste management facilities and impact on other emergency response and recovery activities. If poorly managed, the waste can have significant environmental and public health impacts and can affect the overall recovery process.This paper presents a system overview of disaster waste management based on existing literature. The main literature available to date comprises disaster waste management plans or guidelines and isolated case studies. There is ample discussion on technical management options such as temporary storage sites, recycling, disposal, etc.; however, there is little or no guidance on how these various management options are selected post-disaster. The literature does not specifically address the impact or appropriateness of existing legislation, organisational structures and funding mechanisms on disaster waste management programmes, nor does it satisfactorily cover the social impact of disaster waste management programmes.It is envisaged that the discussion presented in this paper, and the literature gaps identified, will form a basis for future comprehensive and cohesive research on disaster waste management. In turn, research will lead to better preparedness and response to disaster waste management problems.     

废弃电器电子产品回收处理项目建设的若干要点

废弃电器电子产品处理与再利用项目大多已经进入产业建设阶段,需要对于建设规模、处置能力和工艺技术等方面进行深入研究。结合对于产业概况和废弃物特点的研究,就项目建设中的若干要点进行分析,并就冰箱保温层、阴极射线管和废弃印制电路板等特异性处置对象的处理与再利用提出建设性意见。     

Resource-availability scenario analysis for formal and informal recycling of end-of-life electrical and electronic equipment in China

In strategic end-of-life electrical and electronic equipment (EoL EEE) management, it has become important to not only avoid the negative environmental impacts but also enhance the positive effects of secondary resource utilization. This is especially true in emerging countries such as China, where medium- to long-term increases in the amount of EoL EEE generation are projected. This study aims to assess the resource availability potential for EoL EEE recycling based on penetration scenarios for formal and/or informal treatment options in China. We categorized substances contained in EoL television sets and personal computers into environmental, resource, and economic aspects under consideration of product transitions. Barium and copper have a high negative potential impact on human health and/or the ecosystem. Focusing on metals with a high resource potential, the resource availability is assessed under different treatment options using characterization factors identified through a life-cycle impact assessment method, the ReCiPe 2008. The results suggest that copper and lead recycling could alleviate the increase in mining costs of resource utilization. Scenario analysis for penetration of formal and informal recycling options indicated that the difference in the alleviated mining costs between the status quo and short-term transition projections until 2030 corresponds to 2.1–2.4 billion dollars.     

Generation amount prediction and material flow analysis of electronic waste: a case study in Beijing, China.

The draft legislation on e-waste prepared by the Chinese national government assigns management responsibility to local governments. It is an urgent task for the municipal government to plan an effective system as soon as possible to divert the e-waste flow from the existing informal e-waste recycling processes. This paper presents a case study implemented in Beijing, the capital city of China, with the purpose of predicting the amount of obsolete equipment for five main kinds of electronic appliances from urban households and to analyse the flow after the end of their useful phase. The amount to be handled was 885,354 units in 2005 and is predicted to double by 2010. Due to consumption growth and the expansion of urbanization it is estimated that the amount will increase to approximate 2,820,000 units by 2020: 70% of the obsolete appliances will be awaiting collection for possible recycling, 7% will be stored at the owner's home for 1 year on average and 4% will be discarded directly and enter the municipal solid waste collecting system. The remaining items will be reused for about 3 years on average after the change of ownership. The results of this study will assist the waste management authorities of Beijing to plan the collecting system and facilities needed for management of e-waste generated in the near future.