Selective extraction of persistent organic pollutants from environmental matrices

An attempt is made to determine the bioavailability of persistent organic pollutants (POP's) in environmental matrices. The approach is based on the use of the Hildebrand Solubility Parameter, and its individual parameters of hydrogen bonding, dispersion and polarity to select weak and strong solvents to extract POP's from soil matrices. The approach has been applied to both spiked soils and certified reference materials. Initial results indicate that it is possible to fractionate POP's from soil matrices based on their ability to be extracted from soil by particular solvents.     

SI-traceable certification of Cu, Cr, Cd and Pb in sediment and fly ash candidate reference materials

Many fields in environmental analytical chemistry deal with very low limits and thresholds as set by governmental legislations or transnational regulations. The need for the accuracy, comparability and traceability of analytical measurements in environmental analytical chemistry has significantly increased and total uncertainties are even asked for by accreditation bodies of environmental laboratories. This paper addresses achieving these goals to guarantee accuracy, quality control, quality assurance or validation of a method by means of certified reference materials. The assessment of analytical results in certified reference materials must be as accurate as possible and every single step has to be fully evaluated. This paper presents the SI-traceable certification of Cu, Cr, Cd and Pb contents in geological and environmentally relevant matrices (three sediments and one fly ash sample). Certification was achieved using isotope dilution (ID) ICPMS as a primary method of measurement. In order to reduce significantly the number of analytical steps and intermediate samples a multiple spiking approach was developed. The full methodology is documented and total uncertainty budgets are calculated for all certified values. A non-element specific sample digestion process was optimised. All wet chemical digestion methods examined resulted in a more or less pronounced amount of precipitate. It is demonstrated that these precipitates originate mainly from secondary formation of fluorides (essentially CaF2) and that their formation takes place after isotopic equilibration. The contribution to the total uncertainty of the final values resulting from the formation of such precipitates was in general < 0.1% for all investigated elements. Other sources of uncertainty scrutinised included the moisture content determination, procedural blank determination, cross-contamination from the different spike materials, correction for spectral interferences, instrumental background and deadtime effects, as well as the use of either certified values or IUPAC data in the IDMS equation. The average elemental content in the sediment samples was 30-130 micrograms g-1 for Pb, 0.5-3 micrograms g-1 for Cd and 50-70 micrograms g-1 for Cu. Cr was measured in one sample and was about 60 micrograms g-1. The concentrations in the fly ash sample were up to 2 orders of magnitude higher. Expanded uncertainty for the investigated elements was about 3% (coverae factor k = 2) except for Cr, (measured by high resolution ICPMS), for which the expanded uncertainty was about 7% (k = 2).     

Feasibility study prior to the certification of trace elements in urban and industrial wastewater reference materials

Reliable results for the determination of trace elements in urban and industrial wastewaters are of paramount importance for both checking the performance of sewage treatment and for detecting possible urban or industrial contamination sources. The quality control of measurements should in principle rely on external tools such as certified reference materials (CRM), which should represent, as closely as possible, the matrix of samples currently analysed, e.g., in the frame of environmental monitoring. To date, however, no CRM representatives of wastewater composition are available, which limits the possibility for control laboratories to check their QC externally. To fill this gap, the European Commission's Standards, Measurements and Testing Programme (formerly BCR) has started a European collaborative project of which the aim is to test the feasibility of preparation of wastewater reference materials and the analytical state-of-the-art to enable the certification of trace elements in such matrices. This paper presents the results of the first phase of this project, namely the feasibility study and the results of an interlaboratory trial.     

Microwave-Assisted Solvent Extraction of Air Particulates for the Determination of PAHs

A method for the determination of polycyclic aromatic hydrocarbons (PAHs) in air particulates using microwave-assisted solvent extraction (MASE) coupled to a microwave extraction system (MES) is proposed. During the period of August to October, 1994, Singapore was enveloped by haze caused by forest fires in Sumatra, Indonesia. Air sampling were carried out during September and October; the determination of ambient air PAH levels in Singapore was undertaken. PAH analysis by GC-MS provided excellent sensitivity, linearity of quantitation, peak identification. This technique was evaluated using certified reference materials (CRMs) HS-4 and HS-6. Good recoveries of PAHs (>73.3%) were obtained for both CRMs. The MASE technique using MES is suitable for the determination of PAH levels in ambient air with no clean-up step required.     

An assessment of the bioavailability of persistent organic pollutants from contaminated soil

A procedure to assess the bioavailability of persistent organic pollutants (POPs) from soil samples has been developed. The procedure is based on the use of simulated in vitro gastrointestinal extraction to remove POPs from soil matrices. The level of recovery, using this approach, is assessed following liquid-liquid extraction (LLE) and analysis by gas chromatography-mass selective detection (GC-MSD). The remaining soil residue is then extracted using pressurised fluid extraction (PFE) followed by GC-MSD analysis to assess the residual fraction. The residual fraction is monitored to determine the unavailable fraction i.e. not available for absorption in the gastrointestinal tract of humans. The procedure was applied to four soil samples i.e. an aged, spiked soil and three certified reference materials (CRMs) contaminated with POPs. Recoveries of pesticides (lindane, endosulfan I, endrin, DDE, DDD and endosulfan II), phenols (cresol, TCP and PCP), and base neutral compounds (hexachloroethane, acenaphthene, dibenzofuran, fluorene and hexachlorobenzene) from aged, spiked soil following extraction with gastric fluid ranged from 0.8 to 8.3% while following intestinal extraction ranged from 5.5 to 13.5%, irrespective of POP. Recoveries of pesticides (lindane, endosulfan I, endrin, DDE, DDD and endosulfan II) from CRM 805-050 following extraction with gastric fluid were below the limit of detection while following intestinal extraction ranged from 5.3 to 12.8%. Recoveries of phenols (cresol, TCP and PCP) from CRM 401-225 following extraction with gastric fluid ranged from 1.6 to 2.0% while following intestinal extraction ranged from 4.1 to 5.4%. Recoveries of base neutral acid analytes (hexachloroethane, acenaphthene, dibenzofuran, fluorene and hexachlorobenzene) from CRM 107-100 following extraction with gastric fluid ranged from 1.4 to 4.0% while following intestinal extraction ranged from 6.6 to 12.7%. It has been found that the majority of POPs present i.e. >75%, would be excreted if consumed and not be absorbed in the gastrointestinal tract of humans.     

Preparation and evaluation of candidate certified reference materials (CRMs) for nutrients in seawater

Certified reference materials (CRMs) are an essential part of the quality assurance (QA) necessary for the reliable analytical measurement of nutrients in seawater. The CRMs currently available for these analyses are not matrix matched to marine samples. QUASIMEME routinely produces test materials for the nutrients in seawater and nutrients in estuarine water and low-salinity open water Laboratory Performance Studies (LPS) that are both homogeneous and stable. QUASIMEME, in conjunction with Eurofins Scientific, Denmark have produced two reference materials (RMs). The homogeneity testing and preliminary stability studies were carried out by QUASIMEME, and the results are presented in this article. Participants of the QUASIMEME LPS who demonstrated satisfactory long-term performance for the analysis of nutrients in seawater and nutrients in estuarine water and low-salinity open water were invited to take part in the certification exercise. Twenty laboratories returned data, a summary of which is also presented. The certification and long-term stability testing and additional data analysis were carried out by Eurofins Scientific, Denmark, and are outwith the scope of this article and not reported here. Eurofins Scientific, Denmark have marketed these RMs as part of their range of VKI Reference Materials (further information is available from eurofins@eurofins.dk).     

Two fish bile reference materials certified for PAH metabolites

Environmental pollution with polycyclic aromatic hydrocarbons (PAHs) from pyrogenic or petrochemical sources is a matter of concern in many aquatic ecosystems. For field monitoring purposes, PAH metabolite levels in fish bile samples can be used as biomarkers of exposure, but previously there were no reference materials for analytical method validation or quality control. In this paper we describe the preparation and certification of two fish bile materials. BCR 720 is a pure bile material from sediment-exposed flounder (Platichthys flesus) and BCR 721 is a pure bile material from oil-exposed plaice (Pleuronectes platessa). Homogeneity and stability tests were carried out and a group of 12 expert laboratories was assembled for the certification measurements. The methods applied were liquid chromatography with fluorescence detection or gas chromatography with mass spectrometric detection. In BCR 720 three PAH metabolites were certified: 1-hydroxyphenanthrene, 1-hydroxypyrene and 3-hydroxybenzo[a]pyrene. In BCR 721 1-hydroxypyrene was certified. The fourth target compound, 2-hydroxynaphthalene, could not be certified, but the results obtained are listed. The major findings from earlier feasibility studies and recommendations for the optimal use of the reference materials are also included.     

Collaborative study to improve the quality control of rare earth element determinations in environmental matrices

In order to control the quality of rare earth determinations in environmental matrices, the Standards, Measurements and Testing Programme (formerly Community Bureau of Reference, BCR) of the European Commission has started a project, the final aim of which is to certify four types of matrices (tuna muscle, mussel tissue, aquatic plant and estuarine sediment) for their contents of a range of rare earth elements (Sc, Y and the lanthanides: La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu). The elements U and Th were added to the study. The first part of this project consisted of an interlaboratory study which aimed to test the feasibility of preparation of environmental reference materials and to detect and remove most of the pitfalls observed in rare earth determinations. This paper presents the preparation of the four matrices for the intercomparison study and for the candidate reference material. The main results are presented of the interlaboratory study that was carried out prior to the certification campaign. This collaborative trial is the first attempt ever carried out at this scale to evaluate the state-of-the-art of rare earth determinations in the environment. Its impact on the improvement of chemical measurements will have positive effects on the comparability of data necessary for environmental monitoring.     

Analysis of short-chain chlorinated paraffins: a discussion paper

Short-chain chlorinated paraffins are a class of organic compounds widely used in many industrial applications, extensively diffused into the environment, persistent, bioaccumulative, and toxic towards aquatic organisms. However, their study and monitoring in the environment are still limited. Because of the enormous number of positional isomers that characterise their mixtures, the analysis of this class of pollutants is very difficult to perform. Beside this, the lack of certified reference materials poses a problem for the assessment of the quality assurance/quality control of any analytical procedure. At present, the scientific community does not agree on any analytical reference method, although the monitoring of short-chain chlorinated paraffins has already started in order to comply with the Water Framework Directive of the European Union on water quality. In this paper the regulatory framework, in which chlorinated paraffins are included, and the status concerning their determination are summarized. The main analytical difficulties still existing are discussed, and the definition of a method-defined parameter as well as the development of a standardised method are suggested as a way to obtain comparable monitoring data.     

Application of laser-based ion mobility (IM) spectrometry for the analysis of polycyclic aromatic compounds (PAC) and petroleum products in soils

The capability of laser-based IM spectrometry to detect PAC and petroleum products (oils) in model matrices, laboratory reference (LR) materials and in real-world contaminated soil samples was demonstrated. Quantitative IM investigations of PAC-doped PVC films yielded detection limits in the ppm range for single PAC. The potential of IM spectrometry for in situ analysis was demonstrated by the analysis of PAC-containing certified reference (CR) material, and of petroleum product-containing LR materials and real-world soil samples. The calibration of IM signals obtained from oil-doped LR materials was also possible, and detection of oils with concentrations below 100 mg kg(-1) was achieved. The in situ analysis of real-world contaminated soils with the IM and LIF techniques was in good accordance with ex situ reference investigations.     

化学品泄漏致大气环境损害的量化评估初探

以某化学品泄漏造成大气污染为例,采用虚拟治理成本法,通过对污染物单位治理成本的调查,污染物危害系数的确定等步骤量化生态环境损害的数额。针对生态环境损害价值量化过程中主要污染物的选择、单位治理成本的确定、危害类别的判断等技术关键点,提出,应结合环境质量标准限值,污染物危害系数等综合因素选择主要污染物;采用成本函数法来确定某一地区单位治理成本更容易被采纳;利用标签制度（GHS）危险性类别的结论能够快速确定污染物危害系数,以期为大气环境损害鉴定评估技术方法的完善提供参考和借鉴。     

Measurement of environmental pollutants using passive sampling devices--a commentary on the current state of the art

Passive sampling devices have been used since the 1970s to measure time-weighted average (TWA) or equilibrium concentrations of pollutants in various environmental matrices (e.g. air, soils and sediments and water). In recent years the popularity of using such samplers has increased and the technology in now well established for the measurement of atmospheric pollutants. This sector has a long experience of using passive samplers in the short- and long-term assessment of air quality in the local environment and on a global scale (e.g. within the United Nations Stockholm Convention on the trans-boundary movement of persistent organic pollutants (POPs) where large networks of samplers on a continental scale have been established). In comparison, the use of passive samplers for monitoring the aquatic environment has been slower to take off. There has, however, been a recent research drive to develop devices for measuring the wide range of pollutants that can be found in environmental waters (e.g. ground, surface, and marine). It is now being recognised that passive samplers can play a valuable role in monitoring water quality within a legislative framework such as the European Union's Water Framework Directive (WFD). The data from these devices can be used alongside the results obtained from conventional spot or bottle sampling to improve risk assessments and to inform decisions on undertaking potentially expensive remedial actions. Such monitoring techniques may have uses within the European Registration, Evaluation, Authorisation & restriction of CHemicals (REACH) Directive and the forthcoming European Marine Strategy Directive. It is expected that the aquatic monitoring sector will follow a transition similar to that which occurred in air monitoring where data obtained from passive samplers can use used within a legal framework. There has also been increased interest in extending the role of passive samplers to both the measurement of equilibrium concentrations and investigating the movement and release of the dissolved fraction of various pollutants in the pore water of sediments and soils.     

地表水环境质量综合评价方法研究与应用进展

水质评价是目前水环境质量管理的重要支撑,水质综合评价方法已经逐渐由断面评价向流域综合评价进行转变与突破。该文对目前的断面水质评价方法进行了归类综述,并且对流域水质综合评价方法及其在各个国家流域的应用进行了重点评述。分析认为中国在流域评价中所使用的"断面比例法"不够准确,缺乏污染物时空分析以及生物评价等问题,并据此提出了未来的研究方向,为未来地表水质评价方法的提升以及水环境管理的完善提供科学的参考依据和建议。     

牡蛎中多环芳烃(PAHs)标准物质的研制

介绍了牡蛎中多环芳烃标准物质的研究、制备方法 ,进行了均匀性检验、稳定性检验 ,统计计算了检验结果 ,基本确定主要参数。检验结果表明 ,研制的牡蛎中难降解有机物标准物质均匀 ,在一年保存期间内稳定 ,可用于海洋环境监测中     

斑马鱼在环境检测领域中的应用

斑马鱼易饲养、易管理,体外受精和体外发育,可常年产卵、孵化,因此早期被作为模型动物广泛用于生物学研究中.近年来,随着环境问题日益突出,迫切需要有效、全面的环境监测手段和方法.斑马鱼或其转基因品种就是非常好的环境监测首选生物.因其对许多环境污染物十分敏感,可实时检测进入水环境的污染物.对斑马鱼在水体中重金属毒性、环境激素...     

环境空气气态污染物(CO、SO2、NO)标准气体质量评估

为了解当前不同来源环境空气气态污染物（CO、SO₂、NO）标气质量状况,选择12家主流气态污染物（CO、SO₂、NO）标气制造商,分别匿名采购3种气态污染物标气,建立2家参考实验室共同测试的模式和计量溯源一致性评价方法,对标气进行测试后,采用En值法评价其定值准确性,同时评估其技术资料完整性。结果显示：12家制造商的72瓶有证标气中,有9瓶标气定值结果准确性评价为不合格,涉及5个制造商来源,其中NO作为反应性气体,不合格标气数量最多,占比达20.8%;12家制造商中8家技术资料完整。鉴于标准气体对气态污染物监测结果的准确性、可比性和可溯源性具有重要意义,建议进一步加强标气质量事中事后监管和行业评估,推动制造商不断提高标气生产水平。标气使用者则应尽量选择质量可靠的有证标气。     

The application of HPLC-F and GC-MS to the analysis of selected hydroxy polycyclic hydrocarbons in two certified fish bile reference materials

Four selected hydroxy polycyclic aromatic hydrocarbons (OH-PAHs), 2-hydroxy-naphthalene (2-OH-NPH), 1-hydroxy-phenanthrene (1-OH-PHE), 1-hydroxy-pyrene (1-OH-PYR) and 3-hydroxy-benzo[a]pyrene (3-OH-BaP) have been analysed in two certified fish bile reference materials (CRMs) for exposure monitoring of PAHs in the aquatic environment. The two materials, BCR 720 and BCR 721, consist of bile from fish exposed to contaminated sediment and dispersed crude oil, respectively. Both bile samples have been analysed by two different analytical techniques, gas chromatography-mass spectrometry (GC-MS) and high performance liquid chromatography-fluorescence detection (HPLC-F), and the separation performance, detection limits, recoveries and reproducibility for the four target compounds were evaluated. HPLC-F requires a simple sample preparation and the separation capacity is adequate for quantification of 1-OH-PYR and 3-OH-BaP. Detection limits are excellent for 1-OH-PYR (6 pg injected) and 3-OH-BaP (3 pg injected) and generally improved with increasing molecular size. Recoveries ranged from 48 to 99% for the four selected compounds, depending on compound and concentration. Sample preparation prior to GC-MS analysis was more demanding, as reflected by the obtained recoveries for 2-OH-NPH, 1-OH-PHE and 1-OH-PYR (35 to 61%). The sensitivity improved with decreasing molecular size, 2-OH-NPH (1.2 pg injected), 1-OH-PHE (2.4 pg injected) and 1-OH-PYR (6 pg injected). Because of the superior separation power of GC and the extra selectivity of MS detection, GC-MS was the method of choice for the determination of 2-OH-NPH and 1-OH-PHE in both CRMs. In fish bile samples these two compounds are more likely to suffer from chromatographic overlap, and HPLC-F was not sufficiently selective. Determination of 1-OH-PYR was performed with success by both methods, but HPLC-F would be preferred because of the simpler and less time-consuming sample preparation. Detectable concentrations of 3-OH-BaP were present in BCR 720 and could only be determined by HPLC-F. The present work aims to present HPLC-F and GC-MS as complementary methods for the quantitative analysis of OH-PAHs in fish bile.     

环境监测质量控制中水质标准物质应用问题的研究

对环境监测质量控制中水质标准物质的应用问题进行了分析和论述。分别从实验室分析测试标准、质量控制标准的不确定度、质量控制方式的选择以及实验分析的准确度和分析方法研究等方面,讨论了实验室质量控制过程中水质标准物质应用出现的误区和问题。对如何做好实验室分析的质量控制,从多个不同的方面介绍了在使用分析校准用标准物质及水质质量控制用标准物质过程中,如何避免或减少分析误差的方法和措施。同时对计量、质量控制的重要工具水质标准物质的正确使用以及标准物质的规范应用方面提出了相关建议。     

环境中新型阻燃剂检测技术研究进展

新型阻燃剂(NFRs)是传统阻燃剂受到严格管控后的推广替代品,主要包括新型溴代阻燃剂(NBFRs)、新型氯代阻燃剂(NCFRs)和有机磷酸酯阻燃剂(OPFRs)等。NFRs是一类新污染物,大多属于持久性有机污染物。目前,已有多种NFRs在世界各地被检出,引起各国的普遍关注,环境中NFRs的来源及迁移转化规律也由此成为新的研究热点。通过综述环境样品中NFRs检测技术在提取、净化和仪器检测等方面的国内外研究现状,讨论了各种分析技术的特点,分析了NFRs分析过程的质量控制与质量保证问题,展望了该领域未来的发展趋势。     

Urban Air Pollution Patterns, Land Use, and Thermal Landscape: An Examination of the Linkage Using GIS

This article investigates the relationship of local air pollution pattern with urban land use and with urban thermal landscape using a GIS approach. Ambient air quality measurements for sulfur dioxide, nitrogen oxide, carbon monoxide, total suspended particles, and dust level were obtained for Guangzhou City in South China between 1981 and 2000. Landsat TM images and aerial photo derived maps were used to examine city's land use and land cover at different times and changes. Landsat thermal infrared data were employed to compute land surface temperatures and to assess urban thermal patterns. Relationships among the spatial patterns of air pollution, land use, and thermal landscape were sought through GIS and correlation analyses. Results show that the spatial patterns of air pollutants probed were positively correlated with urban built-up density, and with satellite derived land surface temperature values, particularly with measurements taken during the summer. It is suggested that further studies investigate the mechanisms of this linkage, and that remote sensing of air pollution delves into how the energy interacts with the atmosphere and the environment and how sensors see pollutants. Thermal infrared imagery could play a unique role in monitoring and modeling atmospheric pollution.