流域重点工业污染源识别特征成分谱建立技术

研究了基于生产排放全过程、多相、多类污染物并举的污染源识别特征成分谱建立技术。首先建立污染源排放完整图谱,包括原辅料、中间物质、产品、各工艺废水污染物、水处理设施进口和出口污染物等。然后从排放完整图谱中解析出特征污染物。对于废水中的常规污染物和金属污染物,采用与受纳水体浓度相比较的方式得到污染源识别特征污染物,建议将浓度超过受纳水体1倍的污染物定为特征污染物。对于有机污染物,将质量分数之和大于90%的污染物集定为特征有机污染物,并按照有机物类别进行分类。最后开发建立动态的水污染源排放数据库。应用该技术建立了石化行业典型企业的排放特征成分谱,发现这些特征组分具有很好的代表性,为水污染源的识别提供了基础数据。     

生物监测技术在工业废水监测领域的应用研究

生物监测可以系统反映污染物对生物生长的影响及其在生物体内的转化和迁移,在水环境监测与生态健康管理中的重要性日益突出.伴随着工业化的快速发展,中国水环境污染问题依然严峻,工业废水治理和排放问题仍旧突出.为进一步保障工业废水出水及受纳水体水质安全,迫切需要在工业废水监测中引入生物监测技术.对传统微生物群落监测法、水生生物毒...     

不同规模造纸企业主要水污染物排放特征对比研究

造纸行业是废水污染物减排重点行业。以2011—2014年全国环境统计调查数据为基础,对不同规模造纸企业废水治理运行费用和绩效进行了分析,对COD、氨氮排放强度及减排潜力进行了对比。结果表明,不同规模企业污染治理与排放特征存在差异,大中型企业产排污强度低,废水治理投入大;若造纸行业企业全部达标排放,COD排放量在2014年水平上减排21.4%~47.2%,氨氮排放量降低27.7%。     

萧山市羽绒行业污染源调查与排污系数的确定

通过对萧山市羽绒行业中典型企业－－浙江三弘国际羽绒有限公司排放废水的监测分析,计算其羽绒废水中各污染物的排放量,由此确定羽绒行业污染物排放系数和排污总量,为污染物排放总量的控制管理提供了有效依据。     

典型行业废水特征有机污染物排放控制标准探讨

通过对典型行业废水有机污染物排放现状的调查研究,探讨我国现有污水排放标准存在的问题,即现有的标准不能有效控制废水特征有机污染物排放。依据美国环保局多介质环境模型,用不同方法计算水介质排放环境目标值,用该值作为标准限值,评价典型行业废水有机污染物监测结果。针对典型行业废水有机污染物排放特征,提出制订排放控制标准的建议。     

濮阳市工业污染特征与产业布局调整路径探析

基于2017年濮阳市第二次全国污染源普查数据,采用聚类分析和核密度分析的方法对濮阳市行业结构特征、工业污染集聚特征进行了分析。结果表明,濮阳市支柱行业为石化行业,工业总产值占比36.92%,远高于其他行业;非金属矿物制品企业数量最多,污染物排放总量最高;颗粒物排放量占濮阳市工业污染源排放总量的33%,占比最高;非金属矿物制品业与石油、煤炭及其他燃料加工业是濮阳市废气污染物的主要来源,石油、煤炭及其他燃料加工业与农副产品加工业是濮阳市废水污染物的主要来源;濮阳市产业集聚区是污染物产排的重要区域,其污染物产生量占濮阳市污染物产生总量的95.49%,污染物排放量占濮阳市排放总量的63.05%。而非产业集聚区的污染物排放量占濮阳市排放总量的36.95%,是精准治污的重点。针对濮阳市产业结构和产业布局现状,提出,重新整合辖区非金属矿物制品业,继续做强石化行业,兼顾发展污染物排放强度低的行业;挖掘产业集聚区减排潜力,建设绿色产业集聚区是经济与环境协调发展的重要途径;非产业集聚区企业应因地制宜,政策引导,发挥中小企业自主能动性,提升环境质量。以期为濮阳市产业布局调整提供技术支持。     

River water quality and pollution sources in the Pearl River Delta, China

Some physicochemical parameters were determined for thirty field water samples collected from different water channels in the Pearl River Delta Economic Zone river system. The analytical results were compared with the environmental quality standards for surface water. Using the SPSS software, statistical analyses were performed to determine the main pollutants of the river water. The main purpose of the present research is to investigate the river water quality and to determine the main pollutants and pollution sources. Furthermore, the research provides some approaches for protecting and improving river water quality. The results indicate that the predominant pollutants are ammonium, phosphorus, and organic compounds. The wastewater discharged from households in urban and rural areas, industrial facilities, and non-point sources from agricultural areas are the main sources of pollution in river water in the Pearl River Delta Economic Zone.     

Pollutant sources and flows in a municipal sewage system

The flow of heavy metals (Cu, Ni, Cr, Cd, Zn, Pb) and cyanide in the Kokomo, Indiana collection system and wastewater treatment plant is analyzed. The primary objective is to determine the relative contributions of domestic and non-domestic sources to the total pollutant load in the system, and to assess the levels of discharge control required for the disposal of municipal sludge by landfill or agricultural landspreading. Sampling was conducted at point source locations, in major sewer trunk-and feeder lines, and at the treatment plant. Production and waste treatment data are presented for point sources sampled for the purpose of characterizing metal and cyanide discharges as a function of these parameters. A heavy metal mass balance is attempted for the treatment plant. Metal removal factors are presented for various plant operations. A simple statistical approach is presented for the design of a cost-effective sampling program for correlating point source and trunkline pollutant sampling. The purpose is to minimize the amount of sampling required to account for pollutants seen in trunkline and treatment plant streams in terms of discharges from specific point sources.     

Necessity of Toxicity Assessment in Turkish Industrial Discharges (Examples from Metal and Textile Industry Effluents)

Toxicity of some organic and inorganic chemicals to microorganisms is an important consideration in assessingtheir environmental impact against their economic benefits.Microorganisms play an important role in several environmentalprocesses, both natural and engineered. Some organic and inorganics at toxic levels have been detected in industrial discharges resulting in plant upsets and discharge permit violations. In addition to this, even though in some cases the effluent wastewater does not exceed the discharge limits,the results of toxicity tests show potential toxicity. Toxicityknowledge of effluents can benefit treatment plant operators inoptimising plant operation, setting pre-treatment standards, and protecting receiving water quality and in establishing sewer discharge permits to safeguard the plant. In the Turkish regulations only toxicity dilution factor (TDF) with fish is part of the toxicity monitoring program of permissible wastewater discharge. In various countries, laboratory studiesinvolving the use of different organisms and protocol for toxicity assessment was conducted involving a number of discharges.In this study, it was aimed to investigate the acute toxicity of textile and metal industry wastewaters by traditional and enrichment toxicity tests and emphasize the importance of toxicity tests in wastewater discharge regulations. The enrichment toxicity tests are novel applications and give anidea whether there is potential toxicity or growth limiting and stimulation conditions. Different organisms were used suchas bacteria (Floc and Coliform bacteria) algae (Chlorella sp.), fish (Lepistes sp.) and protozoan (Vorticella sp.) to represent four tropic levels. The textile industry results showed acute toxicity for at least one organism in 8 out of 23 effluent samples. Acute toxicity for at least two organisms in 7 out of 23 effluent sampling was observed for the metal industry. The toxicity test results were assessed with chemical analyses such as COD, BOD, color and heavy metals. It was observed that the toxicity of the effluents could not be explained by using physicochemical analyses in 5 cases for metal and 4 cases for the textile industries. The results clearly showed that the useof bioassay tests produce additional information about the toxicity potential of industrial discharges and effluents.     

水泥工业项目竣工环保验收监测中应关注的问题

根据建设项目竣工环境保护验收规范要求,结合工作实践,从验收监测工况的控制、废水监测、废气监测、噪声监测、环境质量监测几方面归纳了水泥工业项目竣工环境保护验收监测工作中应注意的技术问题,并从环保法律法规制度执行、污染防治设施、企业环境管理、排污口规范化、卫生防护距离、总量控制、淘汰落后设备、公众参与等几方面提出环境保护检...     

南京市污水处理厂污泥处理处置现状

调查了南京市污水处理厂污泥产生量、成分、达标状况以及污泥处置方式,指出了污泥处置中存在的问题。提出依据国家相应的标准和法律法规,建立和完善污泥处理处置产业政策,大力发展相关技术和工艺等建议。     

Whole-cell bacterial biosensors for rapid and effective monitoring of heavy metals and inorganic pollutants in wastewater

The increasing number of potentially harmful pollutants in the wastewater effluent discharge necessitates the need for the development of fast and cost effective analytical techniques for extensive monitoring programmes to assess the effectiveness of the treatment process. This study compared the use of bacterial biosensors to the conventional Daphnia magna assay, Chemical Oxygen Demand (COD) and Biochemical Oxygen Demand (BOD) tests as well as chemical analysis, for monitoring the toxicity of wastewater. The bacterial biosensors constructed in this study, using S. sonnei and E. coli, were found to be sensitive to the toxicity of the wastewater effluents. A linear increase in bioluminescence with increasing concentration of heavy metals and inorganic pollutants in water was observed, with a correlation coefficient (r(2)) as high as 0.995 and 0.997, respectively. No notable correlation between biosensor toxicity and BOD and COD test results was observed. These bacterial biosensors could provide appropriate alternatives for a rapid, sensitive and cost effective detection of wastewater quality. However, the differences in sensitivity obtained for the different systems suggest that the use of a battery of toxicity assays may be required to provide a real ecotoxicological assessment of wastewater samples.     

用水氵蚤监测水质

介绍了利用水Sao监测水质的优势及常用方法，探讨了水Sao的实验室培养技术，并了水Sao对污染物的形态、生殖和行为反应，提出利用水Sao监视污水安全排放和生产用水水质的设想。在分析水Sao毒性试验误差来源的基础上，建议对试验生物材料和测试环境进行限定，最终形成操作性强的标准方法。     

大气污染物指纹系统构建及在污染溯源中的应用

基于污染物检测特征信息结合区域产业结构、企业布局等信息构建了大气污染物指纹系统,通过污染物检测特征信息构建的第一级指纹数据库实现了对大气特征污染物的识别和污染物应急处置措施的推送;通过污染源行业及其排放的特征污染物信息构建的第二级指纹数据库实现了产排污行业的溯源;通过企业及其产排污信息,结合气象条件构建的第三级指纹数据库实现了对产排污企业的溯源。基于大气污染物指纹数据库的污染溯源技术为突发环境污染事故中污染物质的识别和污染源的追踪提供了新途径。实际应用验证表明,大气污染物指纹系统污染溯源响应快速、识别精准,实现了大气污染物从监测、溯源到应急处置的全过程无缝衔接。     

Human exposure, health hazards, and environmental regulations

United States environmental regulations, intended to protect human health, generally fail to address major sources of pollutants that endanger human health. These sources are surprisingly close to us and within our control, such as consumer products and building materials that we use within our homes, workplaces, schools, and other indoor environments. Even though these indoor sources account for nearly 90% of our pollutant exposure, they are virtually unregulated by existing laws. Even pollutant levels found in typical homes, if found outdoors, would often violate federal environmental standards. This article examines the importance of human exposure as a way to understand and reduce effects of pollutants on human health. Results from exposure studies challenge traditional thinking about pollutant hazards, and reveal deficiencies in our patchwork of laws. And results from epidemiological studies, showing increases in exposure-related diseases, underscore the need for new protections. Because we cannot rely solely on regulations to protect us, and because health effects from exposures can develop insidiously, greater efforts are needed to reduce and prevent significant exposures before they occur. Recommendations include the development and use of safer alternatives to common products, public education on ways to reduce exposure, systematic monitoring of human exposure to pollutants, and a precautionary approach in decision-making.     

Adaptive Consensus Principal Component Analysis for On-Line Batch Process Monitoring

As the regulations of effluent quality are increasingly stringent, the on-line monitoring of wastewater treatment processes becomes very important. Multivariate statistical process control such as principal component analysis (PCA) has found wide applications in process fault detection and diagnosis using measurement data. In this work, we propose a consensus PCA algorithm for adaptive wastewater treatment process monitoring. The method overcomes the problem of changing operating conditions by updating the covariance structure recursively. The algorithm does not require any estimation compared to typical multiway PCA models. With this method process disturbances are detected in real time and the responsible measurements are directly identified. The presented methodology is successfully applied to a pilot-scale sequencing batch reactor for wastewater treatment.     

常州市工业大气污染物排放特征研究

通过调查企业生产情况,采用现场实测、模型、排放因子等方法,获得了常州市工业大气污染物的排放量,从行业、排放口高度、空间、时间及重点源所占比例等方面,分析了常州市工业大气污染物的分布特征。结果显示:常州市工业PM、PM_(10)、PM_(2.5)、SO_2、NO_x、CO、NH_3、VOCs排放量分别为3.089、1.348、0.695、5.380、7.077、14.459、0.030、0.848万t;钢铁、水泥、热电、金属制品、化工是常州市大气污染物产生的主要行业;高架源、中架源、低架源排放比例依次增加;11.5%的企业占据了全市排放量的86%以上;SO2等污染物各月排放量基本稳定,PM2.5等上半年排放量波动较大;市区企业的集中排放在不利气象条件下易造成大气污染。     

国家硫酸工业污染物排放标准制定中的思考

硫酸工业污染物排放标准预计将于2010年内发布实施。在对有关法律法规、规范性文件等进行研究,对我国硫酸工业现状和国外相关排放标准进行分析的基础上,对硫酸工业污染物排放标准制定中有关适用范围、时段划分、污染物控制等内容进行了思考。     

Environmental economic impact assessment in China: Problems and prospects

The use of economic valuation methods to assess environmental impacts of projects and policies has grown considerably in recent years. However, environmental valuation appears to have developed independently of regulations and practice of environmental impact assessment (EIA), despite its potential benefits to the EIA process. Environmental valuation may be useful in judging significance of impacts, determining mitigation level, comparing alternatives and generally enabling a more objective analysis of tradeoffs. In China, laws and regulations require the use of environmental valuation in EIA, but current practice lags far behind. This paper assesses the problems and prospects of introducing environmental valuation into the EIA process in China. We conduct four case studies of environmental economic impact assessment (EEIA), three of which are based on environmental impact statements of construction projects (a power plant, a wastewater treatment plant and a road construction project) and one for a regional pollution problem (wastewater irrigation). The paper demonstrates the potential usefulness of environmental valuation but also discusses several challenges to the introduction and wider use of EEIA, many of which are likely to be of relevance far beyond the Chinese context. The paper closes with suggesting some initial core elements of an EEIA guideline.     

绍兴市典型印染废水中重金属锑排放现状及排放源调查

分析和统计的86家印染工业企业当中,废水总排口中的总锑超标率为25.6%,质量浓度0.050 mg/L以下较低排放浓度所占比例最大,达62.8%。印染废水锑排放源主要有涤棉和涤纶化纤类布料的染色、印花工艺废水,碱减量工艺废水等,工业液碱、废酸以及硫酸铝污水处理剂等原料当中含锑浓度较高。印染废水经污水处理厂集中纳管深度处理后,锑排放浓度较低,锑去除效率最高达到88.0%,大大降低了环境地表水体锑污染的风险。