悬浮法氯乙烯聚合工艺的风险分析及安全技术

悬浮法聚合氯乙烯生产过程的主要风险是氯乙烯的"暴聚"事故和氯乙烯泄漏事故.聚合反应散热不足,温度过高导致"暴聚"事故.易燃易爆有毒的氯乙烯泄漏可能引发氯乙烯蒸汽云爆炸和火球(BLEVE)事故.以某PVC化工厂氯乙烯聚合釜生产为例,定量计算氯乙烯小孔泄漏量、蒸汽云及BLEVE火球的事故伤害与破坏后果.提出避免导致"暴聚"事故3种安全技术措施:良好的聚合釜反应散热降温;足够的搅拌强度和防止"粘釜"等.防止引发氯乙烯泄漏的3种途径为反应釜轴封、超压泄压时跑料和压力容器及管道的防泄漏技术.     

架空天然气管道泄漏事故后果数值模拟研究

针对架空天然气管道泄漏引起的火灾爆炸问题,采用事件树分析泄漏扩散引起的事故后果,并在数值模拟中着重分析了模拟数学模型的选择。在三种不同泄漏孔径、两种不同风速、两种不同运行压力条件下分别应用ALHOA软件对事故后果进行数值模拟,结果表明:泄漏孔径、运行压力与危害影响范围成正比关系;在闪火和蒸气云爆炸中,风速与危害影响范围成反比关系,而风速对射流火灾的热辐射范围基本没有影响。     

An integrated quantitative hazard analysis method for natural gas jet release from underground gas storage caverns in salt rock. I: Models and validation

It is very important and necessary to perform quantitative hazard analysis for possible accidental leakage from an underground gas storage cavern in salt rock. An integrated quantitative hazard analysis method for natural gas jet release from salt caverns is presented in this paper, which was constituted by a revised model for gas leakage rate calculation, a consequence analysis and a model of probability assessment for harm. The presented method was validated by comparing the analytical results with the data collected from the real accidents (including the leakage, jet fire, fireball and vapor cloud explosion). It is indicated that the proposed method was more accurate than the TNT equivalence method for vapor cloud explosion and gave more reasonable results when applied to the consequence analysis for the thermal radiation from jet fire and fireball.     

Wire-mesh inhibition of jet fire induced by explosion venting

Explosion venting is widely applied in industrial explosion-proof designs due to the convenient, economical and practical features of this method. Natural gas is usually stored in storage tanks. If the gas in the vessel is mixed with air and encounters an ignition source, explosion venting might occur, producing jet fire, generating new secondary derivative accidents and causing casualties and property losses. In this paper, a set of test platforms including wire-mesh suppression devices is established to study the inhibition of jet fire induced by explosion venting by wire mesh. The experimental research shows that a wire mesh significantly inhibits the jet fire induced by explosion venting. The flame propagation velocity and pressure clearly decrease with increasing numbers of wire-mesh layers. The wire-mesh structure significantly affects the flame propagation, and the more layers of mesh there are, the better the suppression effect is. The flame temperature gradually decreases with the addition of the wire mesh. The mesh size significantly affects the pressure propagation of explosion venting. The explosion pressure gradually decreases with the addition of the wire mesh. With increasing distance between the wire mesh and the explosion vent, the maximum temperature first increases and then decreases, and the maximum explosion pressure first decreases and then increases. In the case of single gas cloud, the flame suppression effect is the most obvious when the wire mesh is 0.2 m away from the explosion vent. In the case of double gas clouds, the flame suppression effect is the most significant when the distance between the wire mesh and the first gas cloud is 0.4 m.     

液氨泄漏事故模式比较研究

泄漏、扩散、点火这3个因素,在液氨泄漏源附近一定的时空范围内,按不同时序可以演变成BLEVE、喷射火、闪火、蒸气云爆炸和大气中扩散等5种事故后果模式。该文针对液氨的独特理化性质,对液氨泄漏及其在大气中扩散物理过程进行了分析,并通过算例对比研究了5种液氨事故模式的危害范围和程度,为预防液氨泄漏事故发生和液氨泄漏事故预警提供参考。     

Highlights of LNG risk technology

The authors have recently undertaken a major review of LNG consequence modeling, compiling a wide range of historical information with more recent experiments and modeling approaches in a book entitled “LNG Risk-Based Safety: Modeling and Consequence Analysis”. All the main consequence routes were reviewed – discharge, evaporation, pool and jet fire, vapor cloud explosions, rollover, and Rapid Phase Transitions (RPT’s). In the book, experimental data bases are assembled for tests on pool spread and evaporation, burn rates, dispersion, fire and radiation and effects on personnel and structures. The current paper presents selected highlights of interest: lessons learned from historical development and experience, comparison of predictions by various models, varying mechanisms for LNG spread of water, a modeling protocol to enable acceptance of newer models, and unresolved technical issues such as cascading failures, fire engulfment of a carrier, the circumstances for a possible LNG BLEVE, and accelerated evaporation by LNG penetration into water.     

Estimation of safety distances in the vicinity of fuel gas pipelines

In this paper, safety distances around pipelines transmitting liquefied petroleum gas and pressurized natural gas are determined considering the possible outcomes of an accidental event associated with fuel gas release from pressurized transmission systems. Possible outcomes of an accidental fuel gas release were determined by performing the Event Tree Analysis approach. Safety distances were computed for two pipeline transmission systems of pressurized natural gas and liquefied petroleum gas existing in Greece using real data given by Greek Refineries and the Greek Public Gas Enterprise. The software packages chetah and breeze were used for thermochemical mixture properties estimation and quantitative consequence assessment, respectively. Safety distance determination was performed considering jet fire and gas dispersion to the lower flammable limit as the worst-case scenarios corresponding to immediate and delayed cloud ignition. The results showed that the jet fire scenario should be considered as the limiter for safety distances determination in the vicinity of natural and petroleum gas pipelines. Based on this conclusion, the obtained results were further treated to yield functional diagrams for prompt safety distance estimation. In addition, qualitative conclusions were made regarding the effect of atmospheric conditions on possible events. Thus, wind velocity was found to dominate during a jet fire event suppressing the thermal radiation effect, whereas gas dispersion was found to be affected mainly by solar radiation that favors the faster dissolution of fuel gas below the lower flammable limit.     

Use of water spray curtain to disperse LNG vapor clouds

Effective safety measures to prevent and mitigate the consequences of an accidental release of flammable LNG are critical. Water spray curtain is currently recognized as an effective technique to control and mitigate various hazards in the industries. It has been used to absorb, dilute and disperse both toxic and flammable vapor cloud. It is also used as protection against heat radiation, in case of fighting vapor cloud fire. Water curtain has also been considered as one of the most economic and promising LNG vapor cloud control techniques. Water curtains are expected to enhance LNG vapor cloud dispersion mainly through mechanical effects, dilution, and thermal effects. The actual phenomena involved in LNG vapor and water curtain interaction were not clearly established from previous research. LNG spill experiments have been performed at the Brayton Fire Training Field at Texas A&M University (TAMU) to understand the effect of water curtain in controlling and dispersing LNG vapor cloud. This paper summarizes experimental methodology and presents data from two water curtain tests. The analysis of the test results are also presented to identify the effectiveness of these two types of water spray curtains in enhancing the LNG vapor cloud dispersion.     

氯气和光气爆燃事故源强估算

在建立化学品泄漏的气体排放、液体排放、两相排放模式和爆炸燃烧的火球和气爆，蒸气云爆炸及绝热扩散和池蒸发扩展等模式的基础上，估计分析了氯气和光气爆燃事故源强，即爆炸能量及碎片抛射、冲击波、热辐射和毒云等后果影响     

埋地输氢管道泄漏爆炸事故后果模拟分析

为了输氢管道的安全建设与运营,基于计算流体力学FLACS软件,模拟了埋地输氢管道在半受限空间内的泄漏爆炸事故后果,探讨了泄漏孔径、泄漏时长、输氢压力和环境风速对爆炸事故后果的影响规律,并得出相应的危险区域。结果表明:泄漏孔径、输氢压力和最大爆炸超压均与危险区域呈正相关关系,泄漏时长对事故后果几乎无影响;随着输氢压力的增大,危险区域受建筑物和风速的影响更为明显,在建筑物附近形成了狭长的危险区域带;最大爆炸超压和危险区域随环境风速的增大均呈现出先增大后减小的趋势。     

基于微积分的LPG和CNG喷射火模型建立和三维数值模拟

由液体和气体泄漏引发的喷射火灾事故屡见不鲜,而现有的喷射火模型却有诸多缺陷。将喷射火形状近似为圆锥,鉴于液体和气体的泄漏速度随压强和温度均有变化、点源离地面会有一定高度、风速对火焰倾角也有影响、圆锥喷射中心线上每个点源对目标的热辐射均不同等实际情况,新建液体和气体扩展半径的计算方法,引入风速对火焰高度和火焰偏角的作用,比较AGA法和Thornton模型,发现AGA法更加符合实际,再利用微积分原理建立三维点源喷射火模型,展示火焰形状对目标的影响,从而得出热辐射的最终危险性。最后以LPG和CNG储罐喷射火事故为例进行对比验证,首次模拟出喷射火的形状,更清晰准确地展示了目标入射热辐射通量随目标点位置的变化和危险范围,可为火焰阵面处的消防安全决策提供参考。     

LPG罐区火灾爆炸事故危险性分析

针对重大危险源LPC罐区的火灾爆炸事故频发,首先采用数学泄漏模型分析油罐泄漏,然后应用池火、火球、喷射火火灾和UVCE及BLEVE爆炸事故的数学伤害模型分别分析几种重要的火灾和爆炸事故后果,并针对定量的事故后果分析对安全距离作出预测.     

可燃气体储罐区泄漏危险性定量分析

对位于某城市中心附近的可燃气体储罐区的气体泄漏危险性进行了分析,求出了下风向最大可燃范围和中毒范围.进行灵敏度分析以便识别风速、泄漏面积对泄漏危险性的影响.分析结果显示,风速、泄漏面积对泄漏危险性有显著影响.随着泄漏面积增大,下风向最大可燃范围增大;随着风速的增大,下风向最大可燃范围则减小.最后提出了若干安全措施的建议.     

大型油罐火灾爆炸危害范围研究

针对大型油罐火灾爆炸对人员伤亡危害范围的问题,采用PHAST软件模拟定量分析了外部环境（风速、大气稳定度、空气湿度）、初始条件（泄漏点离地高度、泄漏孔直径）和其他因素（防火堤面积）对火灾爆炸伤亡半径的影响,根据模拟结果拟合了外部环境和初始条件与池火灾和蒸气云爆炸危害范围的关系式。结果表明:在相同条件下,软件模拟与实验结果误差较小,该研究具有可信性;池火灾危害范围随风速、泄漏点离地高度、泄漏孔当量直径和防火堤面积的增加而增加,而与大气稳定度的关系不大;蒸气云爆炸危害范围随风速的增加而降低,随大气稳定度和泄漏孔当量直径的增加而增加,而与泄漏点离地高度和空气湿度影响不大;拟合得到的外部环境和初始条件与池火灾和蒸气云爆炸危害范围的关系式可为大型油罐火灾爆炸事故中相关作业人员的应急撤离提供决策参考。     

LPG船液货泄漏事故风险评估系统研究

通过对液化石油气(LPG)船舶液货舱泄漏事故危险度因素分析,建立液化气液体货物泄漏源强、蒸气释放源强和蒸气扩散计算模型,并制定泄漏事故风险评价流程,基于VB语言编写泄漏事故风险评估系统。利用该系统能够计算得出泄漏事故发生后蒸发气在不同时刻不同区域的蒸发气浓度、爆炸或火灾后对生命财产的伤害半径以及伤害程度等相关参数。对某航行状态下的LPG实船进行模拟分析,结果表明能够对LPG船舶泄漏事故进行有效风险评估,并能对船舶航行安全应急预案的制定和事故后海事鉴定提供一定的技术帮助。     

Accident modeling of toxic gas-containing flammable gas release and explosion on an offshore platform

Toxic gas-containing flammable gas leak can lead to poisoning accidents as well as explosion accidents once the ignition source appears. Many attempts have been made to evaluate and mitigate the adverse effects of these accidents. All these efforts are instructive and valuable for risk assessment and risk management towards the poisoning effect and explosion effect. However, these analyses assessed the poisoning effect and explosion effect separately, ignoring that these two kinds of hazard effects may happen simultaneously. Accordingly, an integrated methodology is proposed to evaluate the consequences of toxic gas-containing flammable gas leakage and explosion accident, in which a risk-based concept and the grid-based concept are adopted to combine the effects. The approach is applied to a hypothetical accident scenario concerning an H₂S-containing natural gas leakage and explosion accident on an offshore platform. The dispersion behavior and accumulation characteristics of released gas as well as the subsequent vapor cloud explosion (VCE) are modeled by Computational Fluid Dynamics (CFD) code Flame Acceleration Simulator (FLACS). This approach is concise and efficient for practical engineering applications. And it helps to develop safety measures and improve the emergency response plan.     

Numerical simulation of LNG dispersion under two-phase release conditions

The use of LNG (liquefied natural gas) as fuel brings up issues regarding safety and acceptable risk. The potential hazards associated with an accidental LNG spill should be evaluated, and a useful tool in LNG safety assessment is computational fluid dynamics (CFD) simulation. In this paper, the ADREA-HF code has been applied to simulate LNG dispersion in open-obstructed environment based on Falcon Series Experiments. During these experiments LNG was released and dispersed over water surface. The spill area is confined with a billboard upwind of the water pond. FA1 trial was chosen to be simulated, because its release and weather conditions (high total spill volume and release rate, low wind speed) allow the gravitational force to influence the cold, dense vapor cloud and can be considered as a benchmark for LNG dispersion in fenced area. The source was modeled with two different approaches: as vapor pool and as two phase jet and the predicted methane concentration at sensors' location was compared with the experimental one. It is verified that the source model affect to a great extent the LNG dispersion and the best case was the one modeling the source as two phase jet. However, the numerical results in the case of two phase jet source underestimate the methane concentration for most of the sensors. Finally, the paper discusses the effect of neglecting the ?9.3° experimental wind direction, which leads to the symmetry assumption with respect to wind and therefore less computational costs. It was found that this effect is small in case of a jet source but large in the case of a pool source.     

高压储氢系统泄漏爆炸事故的动力学演化

为研究燃料氢气泄漏、爆炸的特性和规律,预防高压储氢系统中氢气泄漏爆炸事故发生,以加氢站为背景,数值仿真45 MPa高压储罐氢气泄漏并引发爆炸事故,分析泄漏爆炸动力学性质以及爆炸波在非均匀氢气浓度中的传播机制。同时,基于泄漏爆炸事故演化的力学机理,开展氢气泄漏爆炸动态风险分析,针对氢气不同泄漏量,建立泄漏扩散形成的气云体积、气云爆炸产生的冲击波与空间x,z方向上危害距离之间关系。研究结果表明：氢气泄漏过程中,气云氢气浓度变化与流场雷诺数具有较好一致性;氢气扩散受到高压储氢罐周围装置影响,流场中氢气浓度分布不均匀;当发生燃烧爆炸事故时,冲击波参数和湍动能变化梯度大;得到复杂布局区域冲击波超压峰值与比例距离之间关系式,其相比于理论方法更精细、计算结果更准确。研究结果可为降低高压储氢系统泄漏爆炸事故后果、采取有效防护措施提供一定依据。     

氨分解装置中液氨储罐火灾爆炸危险性分析

以某金属处理企业氨分解装置中液氨储罐罐区为例,对液氨泄漏后火灾爆炸事故及其伤害范围进行了研究,用池火、蒸气云爆炸和沸腾液体扩展蒸气爆炸模型进行计算分析,给出火灾、爆炸事故的人员伤害和财产损失范围。结果表明:围堤堤内池火或罐内池火时,罐区建构筑物内的汽化器、管道等设备会因直接过火或热辐射导致损坏,建筑内人员死亡,但难以波及罐区之外;蒸气云爆炸产生相当于1192.72kgTNT爆炸的当量,爆炸的后果严重,应重点防范,防范的重点为液氨泄漏、点火源;沸腾液体扩展蒸气爆炸的火球半径56.1m,持续时间8.7s,死亡半径27.2m,其源于储罐受热或系统突然失效,液体瞬时泄漏汽化并遇点火源而发生,具有突发性且后果严重,企业应高度重视并严格储罐及系统的定期检验与校验、密切关注系统的有效运行。     

开敞空间可燃气云爆炸冲击波超压及灾害动力响应研究评述

为了进一步梳理和分析开敞空间可燃云爆炸冲击波超压传播规律及灾害动力响应方面的各项研究成果,推进可燃气体爆炸安全防控,减少人员伤亡和经济损失。在分析现有研究的基础上,总结开敞空间可燃气云爆炸冲击波超压传播规律及灾害动力响应研究等方面存在的不足,提出开敞空间多元混合气体爆炸冲击波超压传播规律研究、多影响参数下可燃气云爆炸冲击波超压传播规律定量分析、基于可燃气云爆炸冲击波超压作用下的承载体动力响应等未来研究的关键技术问题。