Current status and developing trends of the contents of heavy metals in sewage sludges in China

It is essential to determine the heavy metal concentrations in sewage sludge to select appropriate disposal methods. We conducted a national survey of heavy metal concentrations of sewage sludge samples from 107 municipal sewage treatment plants located in 48 cities covering the 31 provinces and autonomous regions, as well as Hong Kong, Macao and Taiwan by Xinjiang Production and Construction Corps in 2006, and identified the temporal trends of heavy metal contents in sewage sludge by comparison with surveys conducted in 1994-2001. In 2006, the average concentrations of As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn in sewage sludge were 20.2, 1.97, 93.1, 218.8, 2.13, 48.7, 72.3, and 1058mg.kg-1, respectively. Because of the decreased discharge of heavy metals into industrial wastewater in China and the increasingly stringent regulations governing the content of industrial wastes entering sewers, the average concentrations of Cd, Cr, Cu, Hg, Ni, Pb, and Zn have decreased by 32.3%, 49.7%, 54.9%, 25.0%, 37.2%, 44.8%, and 27.0%, respectively, during the past 12 years. The concentrations of Cd, Cr, Cu, Ni, and Zn in the samples exceeded the heavy metal limits of the Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant in China （GB 18918-2002） by 6.5%, 3.7%, 6.5%, 6.5%, and 11.2%, respectively. From these results, 85 of the 107 municipal sludges analyzed would be considered suitable for land application.     

Removal of Cu（ll） ions from aqueous solution by activated carbon impregnated with humic acid

Humic acid （HA） was impregnated onto powdered activated carbon to improve its Cu（II） adsorption capability. The optimum pH value for Cu（II） removal was 6. The maximum adsorption capacity of HAimpregnated activated carbon was up to 5.98mg.g-1, which is five times the capacity of virgin activated carbon. The adsorption processes were rapid and accompanied by changes in pH. In using a linear method, it was determined that the equilibrium experimental data were better represented by the Langmuir isotherm than by the Freundlich isotherm. Surface charges and surface functional groups were studied through zeta potential and FTIR measurements to explain the mechanism behind the humicacid modification that enhanced the Cu（II） adsorption capacity of activated carbon.     

Effects of in situ biological treatments on heavy metal release of urban river sediment

A typical fiver in Yangzhou City was used to study the effects of artificial aeration, eco-brick cover, biological packing cover, and low-sited plant floating beds on the release of heavy metals from urban river sediments. This work showed that 1） the Cr release rate was decreased by 50.3%-89.6%, with an average of 59.3%, thereby reducing the Cr pollution load to the overlying water by 36.6%-82.7%, with an average of 53.3%; 2） the Zn release rate was reduced by 21.0%-88.9%, with an average of 42.3%, and the Zn pollution load of the overlying water was reduced by 38.0%-67.1%, with an average of 55.0%; 3） the Cu release rate was reduced by 27.5%-91.0%, with an average of 55.3%, and the Cu load of the overlying water was reduced by 57.1%-83.7%, with an average of 71.7%; 4） the Pb release rate was reduced by 11.8%- 79.3%, with an average of 41.2%, and the Pb pollution load of the overlying water was reduced by -1.3%-70.7%, with an average of 29.8%. We also found that the effects of in situ biological treatments on the release of heavy metals were affected by the extent of sediment disturbance. For integrated applications, high-disturbance treatments should be combined with low-disturbance treatments to reduce the explosive release of pollutants caused by sediment disturbance during the treatment operation to achieve better overall treatment effects.     

Assessment of metals in dry-toilet collected matters from suburban areas of Ulaanbaatar,Mongolia, using biosolids quality guidelines and potential ecological risk index

Dry-toilet collected matter （DCM） from traditional dry-toilet pits are a potential health and ecological risk in suburban areas. In this study, the characteristics of metals in DCMs from suburban areas of Ulaanbaatar were surveyed. The results indicate that DCMs contain a high percentage of organic matter and nutrients, while heavy metals are at low levels, which shows good agricultural potential. The concentration ranges of Cr, Cu, Hg, Ni, Pb, and Zn were 11±5, 46±9, 0.08±0.05, 9±3, 17±9, and 338±86mg·kg^-1, respectively. The concentration of Cd was below 0.5 mg.kgl, and a high positive relation was shown between chromium and nickel concentrations. The heavy metals in DCMs were safe for land application but Zn in DCMs was close to the effects range median （ERM）, which is toxic in some cases, such as amphipod bioassays. Because it is mandatory to treat DCMs to reduce pathogens, in the case of heavy metal enrichment and agricultural reuse, composting or pyrolysis are better choices than incinera- tion. Compared with global soil background values, the heavy metals in DCMs showed a low level of ecological risk, but a medium level when compared with Mongolian soil background values. The ecological risk of six heavy metals was in the descending order Hg 〉 Cu 〉 Zn 〉 Pb 〉 Ni 〉 Cr and the contribution rate of Hg exceeded 60%.     

Reuse of heavy metal-accumulating Cynondon dactylon in remediation of water contaminated by heavy metals

Phytoremediation technology is regarded as a simple and efficient way to remove heavy metals from contaminated soil. A reasonable disposal of metal hyperaccumulators is always and resource-saving. The a major issue in waste reuse heavy metal-accumulating Cynondon dactylon （L.） was investigated where heavy metals were desorbed by a facile acid-treatment. The result indicated that more than 90% of heavy metals （Zn, Pb and Cu） was extracted from Cynondon daetylon with 0.2 mmol· L^-1 HCl. The plant residue was used to adsorb heavy metals ions. The adsorption fitted the Langmuir isotherm model with the saturation adsorption capacity of 9.5 mg·g^-1 Zn^2＋, 36.2 mg·g^-1 Pb2＋ and 12.9 mg·g^-1 Cu^2＋, and the surface eomplexation and the backfilling of heavy metal imprinting cavities existed simultaneously during the adsorption. The treatment of wastewaters indicated that the plant residue exhibited a high removal rate of 97% for Cu. Also, the material could be recycled. The method offers a new disposal approach for heavy metal hyperaccumulator.     

Vanadium metabolism investigation using substance flow and scenario analysis

Vanadium is a vital strategic resource, and vanadium metabolism is an important part of the national socio-economic system of China. This study conducts accounting and scenario analysis on the life cycle of vanadium metabolism in China. Based on the character- istics of vanadium life cycle and substance flow analysis （SFA） framework, we present a quantitative evaluation of a static anthropogenic vanadium life cycle for the year 2010. Results show that anthropogenic vanadium consumption, stocks, and new domestic scrap are at 98.2, 21.2, and 4.1 kt, respectively; new scrap is usually discarded. The overall utilization ratio of vanadium is 32.2%. A large amount of vanadium is stockpiled into tailings, debris, slags, and other spent solids. A scenario analysis was conducted to analyze the future developmental trend of vanadium metabolism in China based on the SFA frame- work and the qualitative analysis of technology advance- ment and socio-economic development. The baseline year was set as 2010. Several indicators were proposed to simulate different scenarios from 2010 to 2030. The scenario analysis indicates that the next 20 years is a critical period for the vanadium industry in China. This paper discusses relevant policies that contribute to the improvement of sustainable vanadium utilization in China.     

E. coli and bacteriophage MS2 disinfection by UV,ozone and the combined UV and ozone processes

The combination of low-dose ozone with ultraviolet （UV） irradiation should be an option to give benefit to disinfection and reduce drawbacks of UV and ozone disinfection. However, less is known about the disinfection performance of UV and ozone （UV/ozone） coexposure and sequential UV-followed-by-ozone （UV- ozone） and ozone-followed-by-UV （ozone-UV） expo- sures. In this study, inactivation of E. coli and bacterioph- age MS2 by UV, ozone, UV/ozone coexposure, and sequential UV-ozone and ozone-UV exposures was investigated and compared. Synergistic effects of 0.5-0.9 log kill on E. coli inactivation, including increases in the rate and efficiency, were observed after the UV/ozone coexposure at ozone concentrations as low as 0.05 mg-L-1 in ultrapure water. The coexposure with 0.02-mg.L-1 ozone did not enhance the inactivation but repressed E. coli photoreactivation. Little enhancement on E. coli inactivation was found after the sequential UV-ozone or ozone-UV exposures. The synergistic effect on MS2 inactivation was less significant after the UV/ozone coexposure, and more significant after the sequential ozone-UV and UV-ozone exposures, which was 0.2 log kill for the former and 0.8 log kill for the latter two processes, at ozone dose of 0.1 mg. t-1 and UV dose of 8.55 mJ. cm 2 in ultrapure water. The synergistic effects on disinfection were also observed in tap water. These results show that the combination of UV and low-dose ozone is a promising technology for securing microbiological quality of water.     

Biosorption of Cr（VI） by carbonized Eupatorium adenophorum and Buckwheat straw： thermodynamics and mechanism

High quality and low cost carbon can be prepared from Eupatorium adenophorum （E. adenophorum） and Buckwheat straw. The biosorbent was used for Cr（VI） removal. The effect of experimental parameters, such as pH, sorbent dosage and temperature were examined and the optimal experimental condition was determned. Solution pH is found influencing the adsorp- tion. Cr（VI） removal efficiency is found to be maximum （98%） at pH= 1. Langmuir and Freundlich adsorption isotherms were applicable to the adsorption process and their constants were evaluated. The adsorption data obtained agreed well with the Langmuir sorption isotherm model. The maximum adsorption capacities for Cr（VI） ranged from 46.23 to 55.19mg.g^-1 for temperature between 298 K and 308 K under the condition of pH = 1.0. Thermodynamic parameters such as free energy change （AG）, enthalpy （AH） and entropy （AS） indicate a spontaneous, endothermic and increased randomness nature of Cr（VI） adsorption. Studies found that the raw E. adenophorum and buckwheat straw mixed materials with simple treatment had a high efficiency for the removal of Cr（VI） and would be a promising adsorbent.     

Adsorption of benzene and toluene from waste gas using activated carbon activated by ZnCl2

A series of activated carbons with high surface area were prepared from walnut shell using chemical activation with ZnCl2. In this research the carbonization stage was carried out at 500℃. The performance of the synthesized carbons evaluated in adsorption of benzene and toluene from waste gas. The influence of impregnation ratio on the characteristics of synthesized activated carbons as well as their adsorption capacity was investigated. The ratio of activation agent to walnut shell was selected in the range of 0.5-2.0 wt/wt. The synthesized activated carbons were characterized using XRD, SEM, BET and FTIR techniques. The highest activated carbon production yield was obtained at impregnation ratio of 1.5 wt/wt. The XRD analysis illustrated that peaks intensity decreased with increasing impregnation ratio showing that amorphous property of samples was increased. The SEM analysis revealed successful pore development in synthesized activated carbons obtained at high impregnation ratios. The surface area of the activated carbons increased with increasing impregnation ratio and its maximum value reached 2643 m2.g 1 at impregnation ratio of 2/1. FTIR analysis indicated that the relative amount of different acidic surface groups on synthesized carbons was a function of impregnation ratio. Experimental results for benzene and toluene adsorption showed a high potential of employing synthesized impregnated activated carbon for treatment of waste gas. Generally, the amount of VOC adsorbed on the surface was affected by physicochemical properties of synthesized activated carbons.     

Nitrogen pollution and source identification of urban ecosystem surface water in Beijing

Nitrogen contamination of surface water is a worldwide environmental problem with intensive agricul- ture and high population densities. We assessed the spatial and seasonal variation in concentrations of total nitrogen and different nitrogen species present in surface-water in Beijing, China. Also, chemical （NO3-N/C1-） and isotopic （615Nnitrate） indicators were used to identify nitrate sources. The results showed that, during 2009 and 2010, nitrate nitrogen concentrations ranged from 0.7 to 7.6 mg· L^-1, ammonium nitrogen from 0. I to 3.4 mg· L^-1, and total nitrogen from 2.4 to 17.0mg· L^-1. Inorganic nitrogen accounted for between 60 and 100% of total nitrogen at the ten monitoring sites. Nitrate nitrogen, ammonium nitrogen, and total nitrogen concentrations at the 2 downstream monitoring sites in south-eastern Beijing were significantly higher than those at the other eight upstream monitoring sites （P 〈 0.01）. Examination of seasonal variation showed that there was a significant inverse relationship between nitrate nitrogen concentrations and precipitation, and that nitrate nitrogen concentrations peaked in the dry seasons. The information given by the 15Nnitrate values and nitrate nitrogen concentrations, combined with the NO3-N/C1- ratio distribution, showed that domestic sewage was the major source of nitrate in Beijing. Methods to control and reduce sewage pollution are urgently needed to help manage surface water quality in Beijing.     

Characterization of phosphorus species and modeling for its organic forms in eutrophic shallow lake sediments,North China

Variations of phosphorus （P） and its species in surface sediment of Baiyangdian Lake, a eutrophic shallow lake located in North China, were investigated through combination of field survey and numerical calculation based on cluster analysis. P fractionation was performed by a sequential extraction scheme, categorized as loosely bound P （NH4Cl-P）, reductant soluble P （BD-P）, metallic oxide bound P （NaOH-P）, calcium bound P （HCl-P） and organic P （Org-P）. P concentrations exhibited regional similarities and a total of four sub-areas were identified in which the same rank was HCl-P 〉 Org-P 〉 BD-P ,=NaOH-P 〉NH4Cl-E NH4Cl-P, BD-P and Org-P were found to contribute to P enrichment in overlying water column. Specifically, labile Org-P acted as a potential pool with a greater contribution in aerobic layer compared to anaerobic layer. A hysteresis （lag = 4 months） existed when labile Org-P concentration was negatively correlated with aerobic layer thickness. In view of magnitude of identified P contributors in sub-areas, higher potential of P release was present in Fuhe River and Tang River estuary areas. On the basis of calibration and verification, the mathematical model with parameter settings applied in this study was improved to serve as a tool for limnology management and eutrophic control.     

Simultaneous quantification of several classes of antibiotics in water,sediments, and fish muscles by liquid chromatography-tandem mass spectrometry

Precise and sensitive methods for the simultaneous determination of different classes of antibiotics, including sulphonamides, fluoroquinolones, macrolides, tetracyclines, and trimethoprim in surface water, sediments, and fish muscles were developed. In water samples, drugs were extracted with solid-phase extraction （SPE） by passing 1000 mL of water through hydrophilic lipophilic balanced （HLB） SPE cartridges. Sediment samples were solvent-extracted, followed by tandem SPE （strong anion exchange （SAX） ＋ HLB） clean-ups. Fish muscles were extracted by a mixture of acetonitrile and citric buffer （80：20, v/v） solution, and cleaned by SPE. Liquid chromatography-tandem mass spectrometry （LC-MS/ MS） with multiple reaction monitoring （MRM） detection was employed to quantify all compounds. The recoveries for the antibiotics in the spiked water, sediment, and fish samples were 60.2%-95.8%, 48.1%-105.3%, and 59.8%- 103.4%, respectively. The methods were applied to samples taken from Dianchi Lake, China. It showed that concentrations of the detected antibiotics ranged from limits of quantification （LOQ） to 713.6 ng- L1 （ofloxacin） in surface water and from less than LOQ to 344.8 μg·kg-1 （sulphamethoxazole） in sediments. The number of detected antibiotics and the overall antibiotic concentrations were higher in the urban area than the rural area, indicating the probable role of livestock and human activities as important sources of antibiotic contamination. In fish muscles, the concentration of norfioxacin was the highest （up to 38.5 μg·kg-1）, but tetracyclines and macrolides were relatively low. Results showed that the methods were rapid and sensitive, and capable of determining several classes of antibiotics from each of the water, sediment, and fish matrices in a single run.     

Neighborhood form and CO2 emission: evidence from 23 neighborhoods in Jinan, China

To understand the household C02 emission level in China, as well as how much the neighborhoods＇ socio-economic or design factors could influence the CO2 emission, 23 neighborhoods in Jinan were investigated in 2009 and 2010. These neighborhoods fall into four different types： superblock, enclave, grid and traditional. The household CO2 emission includes sources of both in- home energy use and passenger transportation. The average CO2 emission per household is 7.66 t.a^-1, including 6.87 t in-home operational emission and 792 kg transportation emission. The household CO2 emission by neighborhood categories is 10.97, 5.65, 6.49, 5.40 t-household-1. a-1 for superblock, enclave, grid and tradi- tional respectively. Superblock has the highest average emission and also the highest percent （more than 25%） of transportation emission among four different types of neighborhoods. The residential CO2 emission of superb- lock neighborhoods in Jinan has already reached the level in developed countries nearly ten years ago. It is predictable that more superblock neighborhoods would be built in China with the fast urbanization. How to avoid the rapid household CO2 emission growth in the future would be a systematic issue. The study also found that in addition to income and apartment area, household density, land use mix and accessibility to public transportation are three primary factors which have significant impacts on CO2 emission. High density, mixed land use and convenient accessibility to public transportation tend to reduce household CO2 emission.     

Recovery of NH 4 + by corn cob produced biochars and its potential application as soil conditioner

NH4^＋ ion, a main pollutant in aquatic systems, not only causes eutrophication in rivers and lakes but also contributes to fish toxicity. In this study, an eco-friendly biosorbent was prepared from the pyrolysis of corn cob, a low-cost agricultural residue. The biochars produced by pyrolysis of corn cob at 400℃ and 600℃ were characterized and investigated as adsorbents for NH4＋ -N from an aqueous solution. The biochars were characterized through elemental analysis, Brunauer-Emmett-Teller-N2 surface area analysis, scanning electron microscopy, and Fourier transform infrared spectroscopy. Batch experiments were conducted to investigate the NH4＋ adsorption process of the corn cob biochars. The Freundlich isotherm model fitted the adsorption process better than the Langmuir and Dubinin-Radushkevich isotherm models. Moreover, the adsorption process was well described by a pseudo-second-order kinetic model. Results of thermodynamic analysis suggested that adsorption was a nonspontaneous exothermic process. Biochars produced at 400℃ had higher adsorption capacity than those produced at 600℃ because of the presence of polar functional groups with higher acidity. The exhausted biochar can be potentially used as soil conditioner, which can provide 6.37 kg NH4＋-N-t^-1 （N fertilizer per ton of biochar）.     

Electrochemical oxidation of humic acid at the antimony- and nickel-doped tin oxide electrode

This work investigated the degradation of humic acid （HA） in aqueous solution by electrochemical oxidation with Antimony- and Nickel-doped Tin oxide electrode （Ni-Sb-SnO2/Ti electrode） as the anode. Initial concentrations of HA ranged from 3 to 9 mg-L 1. Under such a concentration scope, the degradation of HA was a mass transfer controlled process. Degradation rate increased with the increase of HA initial concentration. Test on the effect of tert-butanol revealed that · OH played an important role in the oxidation of HA. The absence of cation Ca2＋ was beneficial to HA degradation, which suggested that both indirect and direct electrolyze happened during the whole electrochemical oxidation process. Alkaly （pH = 12） and neutral （pH = 7） conditions were benefical to HA degradation.     

A red water occurrence in drinking water distribution systems caused by changes in water source in Beijing,China: mechanism analysis and control measures

A red water phenomenon occurred in several communities few days after the change of water source in Beijing, China in 2008. In this study, the origin of this problem, the mechanism of iron release and various control measures were investigated. The results indicated that a significant increase in sulphate concentration as a result of the new water source was the cause of the red water phenomenon. The mechanism of iron release was found that the high-concentration sulphate in the new water source disrupted the stable shell of scale on the inner pipe and led to the release of iron compounds. Experiments showed that the iron release rate in the new source water within pipe section was over 11-fold higher than that occurring within the local source water. The recovery of tap water quality lasted several months despite ameliora- tive measures being implemented, including adding phosphate, reducing the overall proportion of the new water source, elevating the pH and alkalinity, and utilizing free chlorine as a disinfectant instead of chloramine. Adding phosphate was more effective and more practical than the other measures. The iron release rate was decreased after the addition of 1.5 mg. L-1 orthophosphate- P, tripolyphosphate-P and hexametaphosphate-P by 68%, 83% and 87%, respectively. Elevating the pH and alkalinity also reduced the iron release rate by 50%. However, the iron release rate did not decreased after replacing chloramine by 0.5-0.8 mg. L-1 of free chlorine as disinfectant.     

CO2 adsorption performance of ZIF-7 and its endurance in flue gas components

Porous ZIF-7 with the sodalite （SOD） cage structure （ZIF, Zeolitic imidazolate framework） were synthesized by the solvothermal method. Synthesized material was characterized by powder X-ray diffraction （PXRD）, thermal gravity （TG）, scanning electron micro- scopy （SEM） and Na adsorption analysis. ZIF-8 with the SOD structure and a littl larger pore window was synthesized in a similar way and was characterized for comparisons. Thermal stability and structural stability of ZIF-7 were tested through PXRD analysis, and the capability of the material for CO2 capture from simulated flue gas was investigated through physical adsorption method. The results showed that CO： adsorption capacity on ZIF-7 was about 48 mL. gl while the capacity on ZIF-8 was about 18mg.g-1 （at 12C and 0.98 P/Po relative pressure）. Furthermore, the impact of flue gas components on adsorption capacity of ZIF-7 and the selectivity of CO2 against N2 on ZIF-7 was also investigated in this work     

Evaluation of endocrine disruption and dioxin-like effects of organic extracts from sewage sludge in autumn in Beijing,China

Study on effective disposal and utilization of sewage sludge has recently been the target of growing interest in China. However, potential risks are associated with the use of sludge due to its contamination with toxic organics, heavy metals and pathogenic microorganisms. In this study, a screening assessment was conducted on sewage sludge samples collected from 17 different sewage treatment plants in Beijing, based on a batch of in vitro bioassays, including a set of recombinant gene yeast assays for endocrine disruption, and an ethoxy resorufin-O- deethylase （EROD） assay using H4IIE cells for aryl hydrocarbon receptor （Ah-R） agonistic activities. Our results suggested that moderate levels of estrogen receptor agonistic activities （0.9 ng E2. g-1 to 6.8 ng E2. gl, dw）, but relative higher androgen receptor antagonistic activ- ities （nd to 45%）, progestin receptor antagonistic activities （nd to 80%） and Ah-R agonistic activities （1390 to 6740 pg 2,3,7,8-tetrachlorodibenzo-p-dioxin （TCDD）·g-1, dw） were found in sewage sludge samples. However, there were no significant correlations between the toxic effects of sewage sludge and the sewage treatment processes. In addition, the 17β-estradiol （E2） equivalent quantity （EEQ） level of the sewage sludge was increased after the composting treatment, whereas the 2,3,7,8-tetrachlorodi- benzo-p-dioxin toxic equivalent quantity （TEQ） level of sewagesludge composted was much lower than that of sewage sludge.     

Comparisons in subcellular and biochemical behaviors of cadmium between Iow-Cd and high-Cd accumulation cultivars of pakchoi （Brassica chinensis L.）

Subcellular distributions and chemical forms of cadmium （Cd） in the leaves, stems and roots were investigated in low-Cd accumulation cultivars and high-Cd accumulation cultivars ofpakchoi （Brassica chinensis L.）. Root cell wall played a key role in limiting soil Cd from entering the protoplast, especially in the low-Cd cultivars. The high-Cd cultivars had significantly higher leaf and stem Cd concentrations than the low-Cd cultivars in cell wall fraction, chloroplast/trophoplast fraction, organelle fraction and soluble fraction. In low-Cd cultivars, which were more sensitive and thus had greater physiological needs of Cd detoxification than high-Cd cultivars, leaf vacuole sequestrated higher proportions of Cd. Cd in the form of pectate/protein complexes （extracted by 1 tool. L~ NaC1） played a decisive role in Cd translocation from root to shoot, which might be one of the mechanisms that led to the differences in shoot Cd accumulation between the two types of cultivars. Furthermore, the formation of Cd- phosphate complexes （extracted by 2% HAc） was also involved in Cd detoxification within the roots of pakchoi under high Cd stress, suggesting that the mechanisms of Cd detoxification might be different between low- and high-Cd cultivars.     

A review of atmospheric mercury emissions,pollution and control in China

Mercury, as a global pollutant, has significant impacts on the environment and human health. The current state of atmospheric mercury emissions, pollution and control in China is comprehensively reviewed in this paper. With about 500-800 t of anthropogenic mercury emissions, China contributes 25%-40% to the global mercury emissions. The dominant mercury emission sources in China are coal combustion, non-ferrous metal smelting, cement production and iron and steel production. The mercury emissions from natural sources in China are equivalent to the anthropogenic mercury emissions. The atmospheric mercury concentration in China is about 2-10 times the background level of North Hemisphere. The mercury deposition fluxes in remote areas in China are usually in the range of 10-50μg·m^-2·yr^-1. To reduce mercury emissions, legislations have been enacted for power plants, non-ferrous metal smelters and waste incinerators. Currently mercury contented in the flue gas is mainly removed through existing air pollution control devices for sulfur dioxide, nitrogen oxides, and particles. Dedicated mercury control technologies are required in the future to further mitigate the mercury emissions in China.