共查询到19条相似文献,搜索用时 125 毫秒
1.
大型复杂电子系统电子元器件选用与管理方法研究 总被引:1,自引:0,他引:1
电子元器件是组成电子系统的最小单元,电子元器件的选用与管理是电子系统设计中最关键的一步,也是系统质量和可靠性的基础。本文从电子元器件管理架构、电子元器件的优选以及进口电子元器件的选用控制等方面提出了一套大型复杂电子系统电子元器件选用与管理方法,以加强和规范系统电子元器件的管理和选用,提高大型复杂电子系统的质量和可靠性。 相似文献
2.
本文首先对大型复杂电子系统的特点及"五性"一体化设计的思想进行了阐述,进而结合工程实际,分析了当前"五性"设计存在的问题,提出开展"五性"一体化设计是解决上述问题的根本出路,并提出了相应建议措施,对如何建立"五性"指标体系、综合设计模型、"五性"一体化信息平台进行了一定的阐述。 相似文献
3.
4.
5.
6.
橡胶减振器具有良好的减振、隔音、缓冲性能以及重量轻的特点,正被日益广泛地应用于特种飞机的任务电子系统.然而,橡胶属于有寿材料,为保证系统的使用安全,快速评估橡胶减振器在特定环境下的使用寿命非常重要.本文针对某机载橡胶减振器,设计了一种寿命加速试验的方法和流程,可作为同类产品寿命试验的参考. 相似文献
7.
大型电子系统显示控制台环境适应性设计 总被引:3,自引:0,他引:3
开展环境适应性设计是保证装备满足环境适应性要求的重要途径.本文对环境适应性设计流程、方法进行了总结,并介绍了大型电子系统显示控制台环境适应性设计技术. 相似文献
8.
9.
在设计电子系统的时候,除了电路的合理性外,还必须考虑和处理好电子系统的电磁干扰(EMI)和电磁兼容性(EMC)问题。本文论述应用屏蔽拓扑进行干扰控制的概念,其目的在于通过控制干扰源的电磁发射、抑制电磁干扰的传播以及增强敏感设备的抗干扰能力,使电子设备及系统实现电磁兼容性。 相似文献
10.
介绍了一种军事电子系统装备在批生产过程中进行生产过程管理、技术状态管理和技术质量提升等方面工作时的考核指标体系,其从过程、质量和成本三个维度对批生产工作进行全方位考核。 相似文献
11.
高校自动排课系统的设计与实现 总被引:4,自引:0,他引:4
高校的排课工作一直是教学管理中一项重要而复杂的工作,拥有大量的约束条件,根据不同的实际情况也有着复杂的特殊性.高校自动排课系统不仅能够提高教学管理人员的工作效率,也可以大大提高排课的科学性和可靠性. 相似文献
12.
Gregory D. Mueller Anita M. Thompson 《Journal of the American Water Resources Association》2009,45(5):1116-1126
Abstract: Runoff from urban catchments depends largely on the amount of impervious surface and the connectivity of these surfaces to the storm sewer drainage system. In residential areas, pervious lawns can be used to help manage stormwater runoff by intercepting and infiltrating runoff from impervious surfaces. The goal of this research was to develop and evaluate a simple method for estimating the reduction in stormwater runoff that results when runoff from an impervious surface (e.g., rooftop) is directed onto a pervious surface (e.g., lawn). Fifty‐two stormwater runoff reduction tests were conducted on six residential lawns in Madison, Wisconsin during the summer of 2004. An infiltration‐loss model that requires inputs of steady‐state infiltration rate, abstraction (defined here as surface storage, vegetation interception and cumulative total infiltration minus steady‐state infiltration during the period prior to steady‐state), and inundated area was evaluated using experimental data. The most accurate results were obtained using the observed steady‐state infiltration rates and inundated areas for each test, combined with a constant abstraction for all tests [root mean squared (RMS) difference = 1.0 cm]. A second case utilized lawn‐averaged steady‐state infiltration rates, a regression estimate of inundated area based on flow‐path length, and lawn‐specific abstractions based on infiltration rate (RMS difference = 2.2 cm). In practice, infiltration rates will likely be determined using double‐ring infiltration measurements (RMS difference = 3.1 cm) or soil texture (RMS difference = 5.7 cm). A generalized form of the model is presented and used to estimate annual stormwater runoff volume reductions for Madison. Results indicate the usefulness of urban lawns as a stormwater management practice and could be used to improve urban runoff models that incorporate indirectly connected impervious areas. 相似文献
13.
矿泉水是一个十分复杂的物理化学体系。本文从无机地球化学和化学热力学的角度出发,讨论了卧龙饮用天然热矿水的硅、锶、氡、碳酸盐化学和稳定同位素特征。为该矿水水文地球化学、环境化学和生物化学等方面的进一步研究提供了化学基础资料。 相似文献
14.
15.
红外热像仪在电子设备热设计检查中的应用 总被引:1,自引:0,他引:1
在电子设备的研制和设计阶段,热测试与分析是热设计中的重要环节。本文阐述了利用红外热像仪对电子设备关键部位进行热测试,检测电子设备内部温度分布情况,并与设计目标进行比较与纠正,从而达到热设计的最终目的。 相似文献
16.
本文通过对水资源优化系统的分析,指出了该系统一些易被人们忽视的特征:①水资源优化系统只是整个资源优化大系统的一个子系统,它具有大型性、整体最优性、等级层次性、相对独立性等诸多特征,因此我们必须将其置于资源优化大系统中去考察。②该系统也是一个复杂的动态系统,所以必须应用动态规划法去处理它。③水资源优化系统中的多目标间存在各种冲突,显然协调冲突在水资源优化配置研究中是至关重要的,文中提出三种冲突-协调方法,笔者更推崇的是第三种方法,即“地理‘二难’推理”。 相似文献
17.
18.
阐释了信息产业专门化街区的内涵,结合对合肥市黄山路信息产业专门化街区构成要素的分类及其邻近度的分析,分别从空间结构演化、景观演化、功能演化三方面阐述了合肥市黄山路由"电子一条街"向"信息产业专门化街区"的总体演化阶段,探讨了信息产业专门化街区的未来发展趋势。 相似文献
19.
Low permeability regions in which solute movement is governed by diffusion reduce the availability of pollutants for remediation and can function as long-term sources of groundwater contamination. The inherent difficulty in understanding mass transfer from these regions of sequestered contamination is further complicated by unknown solute distributions within the low-permeability regions (sequestering regions). When models are calibrated to reproduce temporal histories of solute release from a sequestering region (desorption), the fitted parameter values are used to infer the physical or chemical characteristics of the media; however, the calibrated parameters also reflect the case-specific initial conditions (i.e., the solute distribution within the sequestering region domain at the onset of desorption). This phenomenon is demonstrated using model simulations of solute diffusion from hypothetical solids with characteristics similar to those of the well studied Borden, Ontario aquifer system. Solute release from the solids is simulated using a batch diffusion model under different initial solute distributions within the solids. The results of these model simulations are used to calibrate parameters of a multiple first-order rate desorption model (MRM) to illustrate how the fitted MRM parameters increase or decrease depending on the initial "aging" of the solids. Further numerical simulations are conducted for a one-dimensional flow system under steady-state and variable-rate hydraulic flushing. These simulations show that although aging reduces desorptive mass flux during early stages of flushing, aged sites have greater desorptive mass flux (greater solute availability) than "freshly" contaminated media during the later stages of remediation. Overall, the results demonstrate why the physicochemical meaning of observed desorption rates cannot be accurately deduced without first understanding the initial solute distribution within the media. 相似文献