Removal of Methyl Violet from aqueous solutions using poly （acrylic acid.co-acrylamide）/attapulgite composite

The adsorption of Methyl Violet (MV) cationic dye from aqueous solution was carried out by using crosslinked poly (acrylic acid-co-acrylamide)/attapulgite (Poly(AA-co-AM)/ATP) composite as adsorbent. The factors influencing adsorption capacity of the composite such as pH, concentration of the dye, temperature, contact time, adsorbent dosage, ionic strength and surfactant were systematically investigated. The equilibrium data fitted very well to the Langmuir isotherm and the maximum adsorption capacity reached 1194 mg/g at 30°C. The thermodynamic parameters including G0, △H0 and △S 0 for the adsorption processes of MV on the composite were also calculated, and the negative △H0 and △G0 confirmed that the adsorption process was exothermic and spontaneous. The kinetic studies showed that the adsorption process was consistent with the pseudo second-order kinetic model and the desorption studies revealed that the regeneration of the composite adsorbent can be easily achieved.     

Enhanced adsorption of Methylene Blue from aqueous solution by chitosan-g-poly （acrylic acid）/vermiculite hydrogel composites

A series of chitosan-g-poly (acrylic acid)/vermiculite hydrogel composites were synthesized and used as adsorbents for the investigation of the e ect of process parameters such as vermiculite content, pH of dye solution, contact time, initial concentration of dye solution, temperature, ionic strength and concentration of surfactant sodium dodecyl sulfate on the removal of Methylene Blue (MB) from aqueous solution. The results showed that the adsorption capacity for dye increased with increasing pH, contact time and initial dye concentration, but decreased with increasing temperature, ionic strength and sodium dodecyl sulfate concentration in the present of the surfactant. The adsorption kinetics of MB onto the hydrogel composite followed pseudo second-order kinetics and the adsorption equilibrium data obeyed Langmuir isotherm. By introducing 10 wt.% vermiculite into chitosan-g-poly (acrylic acid) polymeric network, the obtaining hydrogel composite showed the highest adsorption capacity for MB, and then could be regarded as a potential adsorbent for cationic dye removal in a wastewater treatment process.     

污泥与煤共热解制备吸附剂及其对活性艳红X-3B的吸附性能

以污水处理站脱水污泥和煤为原料共热解制备吸附剂,将其用于活性艳红X-3B模拟染料废水的吸附处理.考察了吸附时间,温度,pH及吸附剂投加量对吸附效果的影响,并对其吸附动力学和热力学特性进行了探讨.结果表明:所制备吸附剂的碘吸附值为321.62 mg/g,产率为44.85%,比表面积为189.23 m2>/sup>/g,浸出液中未检测出重金属;吸附剂对活性艳红X-3B的去除率随吸附时间、温度和吸附剂投加量的增加均增大,并逐渐趋于平衡,而随pH的增加而减小;吸附剂对活性艳红X-3B的吸附动力学比较符合伪二级吸附动力学方程和二阶段吸附动力学方程,颗粒内扩散过程是吸附速率的控制步骤,但不是唯一的速率控制步骤;Langmuir等温方程比Freundlich等温方程更适合于描述该吸附行为;吸附焓变(ΔH0>/sup>)>0,吸附是一个吸热过程,提高温度有利于吸附的进行,吸附自由能变(ΔG0>/sup>)<0,吸附过程为自发进行,吸附熵变(ΔS0>/sup>)>0.      

有机胺插层四钛酸对直接湖蓝5B的吸附性能研究

在微波辅助下对四钛酸进行了有机胺插层,获得了正辛胺﹑正十二胺﹑正十六胺插层四钛酸材料,研究了3种层状物质作为吸附剂,pH﹑震荡时间﹑吸附剂用量等因素对直接湖蓝5B偶氮染料吸附的影响,确定了3种材料吸附的最佳条件。研究表明:微波有机胺插层四钛酸材料具有优良的吸附性能,pH=1.0时,正辛胺插层四钛酸用量为0.8 g/L﹑振荡时间40 min,正十二胺插层材料和正十六插层材料用量为0.4 g/L﹑振荡时间分别30 min和50 min时,吸附脱色效果最好。随染料浓度增大,温度升高,插层四钛酸材料会发生板层分离,表现为常规的物理吸附过程。在50℃时,正辛胺﹑正十二胺﹑正十六插层四钛酸对直接湖蓝5B染料的吸附量分别达到636 mg/g﹑3 349 mg/g﹑2 856 mg/g。     

糠醛渣对水中甲基橙的吸附性能

为了探究糠醛生产中的废料糠醛渣对水体中甲基橙的吸附性能和吸附机制,利用FT-IR（傅里叶变换红外光谱）和SEM（扫描电镜）对糠醛渣的结构特性进行表征,浅析糠醛渣对甲基橙的吸附机制;通过模拟试验,考察了吸附剂用量、pH、吸附时间和温度等因素对糠醛渣吸附甲基橙过程的影响;采用吸附动力学模型和吸附等温模型,进一步探讨了糖醛渣吸附机制.结果表明:①糠醛渣结构疏松多孔,表面具有丰富的官能团,有利于吸附.②糠醛渣能高效吸附水中甲基橙,在温度为293 K、pH为4~9、吸附剂用量为0.2 g时,糠醛渣对400 mg/L的甲基橙吸附效果最好;吸附过程在60 min左右达到平衡,并且较好地符合准二级动力学模型（R2=0.999 9）;吸附量随温度的升高而减少,表明该吸附过程为放热过程;在293 K时最大理论吸附量为54.35 mg/g,吸附数据更符合Langmuir吸附等温模型（R2=0.993 3）,表明糠醛渣对甲基橙的吸附主要为单层吸附.③糠醛渣可再生重复利用,吸附甲基橙后的糠醛渣用0.1 mol/L氢氧化钠溶液进行解吸再生试验,第5次使用时对甲基橙仍然具有较好的吸附效果.研究显示,糠醛渣在室温条件下、较宽的pH范围内能快速高效地吸附水中的甲基橙,并且重复利用性好,是一种在偶氮染料废水处理中具有发展前景的廉价、可再生生物质吸附材料.      

Adsorption/desorption behavior between a novel amphoteric granular lignin adsorbent and reactive red K-3B in aqueous solutions

A novel amphoteric granular lignin adsorbent(AGLA) was prepared using magnesium lignosulfonate as a raw material which was provided by a straw sulfite pulp mill in Guangdong Province, China. A reactive dye(red K-3B) was used as an adsorbate to investigate the adsorption behavior by static and mobile ways. The removal of reactive red K-3B was found to be initially pH and concentration dependent.Moreover, an increase of solution temperature ranging from 5℃ to 60℃ helped to enhance the rate of intraparticle diffusion of adsorbate and changes in the size of the pores of the adsorbent and thus to reduce the adsorption time. The total breakthrough adsorption capacity was 531 mg/g, and the saturated adsorption capacity was 560 mg/g, which prevailed over the activated carbons evidently. The reactive red K-3B adsorbed on AGLA could be recovered with a mixture of alcohol, NaCI and HCI aqueous solutions. The recovery percentage could reach 92.4%.     

磁性纳米氢氧化锆对硫酸根吸附特性研究

以纳米四氧化三铁、氧氯化锆和氨水为原料,用溶胶凝胶法合成了磁性纳米氢氧化锆。通过静态吸附试验研究磁性纳米氢氧化锆对硫酸根的吸附性能。考察了溶液初始pH、吸附剂投加量、温度等因素对吸附效果的影响。结果表明:pH是影响吸附的重要因素,适宜的pH为1~2。吸附容量、去除率均随投加量增大而增大,之后去除率趋于平衡。磁性纳米氢氧化锆对硫酸根吸附过程符合Langmuir单分子层模型。对热力学参数ΔG0、ΔH0、ΔS0进行分析,表明磁性纳米氢氧化锆对硫酸根的吸附为吸热、熵值增加的自发过程。动力学分析表明,准二级动力学模型能更准确地拟合动力学过程。对吸附饱和的磁性纳米氢氧化锆进行脱附和再吸附,脱附率可达90%,再吸附容量为90 mg/g,表明磁性纳米氢氧化锆是一种磁分离性能良好的可以重复利用的硫酸根吸附剂。     

磁性氧化石墨烯制备及去除水中刚果红的研究

采用Hummer方法制备了氧化石墨烯(GO),采用化学共沉淀法把铁氧化物纳米粒子覆盖在GO上制成磁性氧化石墨烯(MGO),并把MGO用作吸附剂去除水中阴离子染料刚果红.采用扫描电镜(SEM)、透射电镜(TEM)、Zeta电位仪和磁强计对MGO进行了表征.研究了吸附动力学,吸附等温线及初始pH值,离子强度对吸附的影响.考察了MGO对自来水中刚果红的去除效果.结果表明,GO具有片状的二维纳米结构,表面有许多的褶皱;当pH3.5,吸附剂表面带负电荷,等电点为3.5;MGO的饱和磁化强度为31.2emu/g,足够从水溶液中分离出来.刚果红的吸附符合准二级动力学模型,且在吸附时间为7h内基本达到吸附平衡.在超纯水中最大吸附容量高达140.6mg/g,且吸附量随pH值升高先增加再降低,当pH4~5达到最大值.MGO对自来水中刚果红的最大吸附容量为287.6 mg/g,为在超纯水中的2倍,表明MGO对刚果红具有很好的去除效果.     

石墨烯基磁性复合材料吸附水中亚甲基蓝的研究

建立了一种超声辅助共沉淀法制备磁性Fe3O4/氧化石墨烯(Fe3O4/GO)纳米粒子.透射电镜和磁滞回线研究表明,该复合物具有小的颗粒尺寸和超顺磁性.该磁性纳米材料可以吸附废水中的染料亚甲基蓝,实验研究了溶液pH值、吸附剂的用量、时间和温度对亚甲基蓝去除率的影响.结果表明,pH值在6~9范围内,Fe3O4/GO都能高效地吸附亚甲基蓝.反应过程在前25 min反应速率很快,到180 min内达到吸附平衡.该磁性纳米材料对亚甲基蓝的吸附符合Langmuir吸附等温模型和准二级动力学方程,吸附过程是一个自发和吸热过程.该吸附材料对亚甲基蓝吸附容量高,在313 K时Fe3O4/GO的饱和吸附量为196.5 mg·g-1.另外,可以方便地通过外部磁场分离回收吸附剂,利用过氧化氢可以再生重复使用,是一种优良的吸附染料废水的材料.     

Regenerable adsorbent for removing ammonia evolved from anaerobic reaction of animal urine

The waste gas evolved from biodegradation of animal urine contains ammonia causing environmental concerns. A new and effective method for removing ammonia from such waste gas using reactive adsorption is presented. In the process, activated carbon impregnated with H2SO4（H2SO4/C） is employed. Ammonia in the waste gas reacts with H2SO4 on the adsorbent instantaneously and completely to form （NIL）2SO4. The H2SO4/C adsorbent is high in NH3 adsorption capacity and regenerable. The NH3 removal capacity of this regenerable adsorbent is more than 30 times that of the adsorbents used normally in the industry. The spent H2SO4/C is regenerated by flowing low-pressure steam through the adsorbent bed to remove the （NH4）2SO4 from the adsorbent. The regeneration by-product is concentrated （NH4）2SO4 solution, which is a perfect liquid fertilizer for local use. Re-soaking the activated carbon with H2SO4 solution rejuvenates the activity of the adsorbent. Thus the H2SOJC can be reused repeatedly. In the mechanism of this reactive adsorption process, trace of H20 in the waste gas is a required, which lends itself to treating ammonia gas saturated with moisture from biodegradation of animal urine.     

Adsorption of Methylene Blue on magnesium silicate： Kinetics, equilibria and comparison with other adsorbents

Batch adsorption from aqueous solutions in a slightly basic medium of Methylene Blue, up to 2500 mg/L, onto synthetic magnesium silicate (Florisil) of three particle size ranges (mean diameters of 112, 200 and 425 μm) was compared to the corresponding adsorption onto activated carbon and Amberlite XAD-2. The best fit of the kinetic results was achieved by a pseudo second-order equation. The equilibrium data were found to be well represented by the Langmuir isotherm equation. Amberlite XAD-2, an unspecific adsorbent capable of adsorbing exclusively through a surface effect, exhibited a poor dye uptake, confirming that the adsorption mechanism on Florisil was due to electrostatic attraction and ion exchange. Moreover, the comparison between Florisil and the other adsorbents was performed on the basis of the evaluation of the surface area and pore volume occupied by the adsorbed dye.     

Application of activated carbon derived from scrap tires for adsorption of Rhodamine B

Activated carbon derived from solid hazardous waste scrap tires was evaluated as a potential adsorbent for cationic dye removal. The adsorption process with respect to operating parameters was investigated to evaluate the adsorption characteristics of the activated pyrolytic tire char (APTC) for Rhodamine B (RhB). Systematic research including equilibrium, kinetics and thermodynamic studies was performed. The results showed that APTC was a potential adsorbent for RhB with a higher adsorption capacity than most adsorbents. Solution pH and temperature exert significant influence while ionic strength showed little e ect on the adsorption process. The adsorption equilibrium data obey Langmuir isotherm and the kinetic data were well described by the pseudo second-order kinetic model. The adsorption process followed intra-particle di usion model with more than one process a ecting the adsorption process. Thermodynamic study confirmed that the adsorption was a physisorption process with spontaneous, endothermic and random characteristics.     

Removal of heavy metal ions from aqueous solution using red loess as an adsorbent

The adsorption behaviors of heavy metals onto novel low-cost adsorbent, red loess, were investigated. Red loess was characterized by X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectra. The results indicated that red loess mainly consisted of silicate, ferric and aluminum oxides. Solution pH, adsorbent dosage, initial metal concentration, contact time and temperature significantly influenced the efficiency of heavy metals removal. The adsorption reached equilibrium at 4 hr, and the experimental equilibrium data were fitted to Langmuir monolayer adsorption model. The adsorption of Cu(II) and Zn(II) onto red loess was endothermic, while the adsorption of Pb(II) was exothermic. The maximum adsorption capacities of red loess for Pb(II), Cu(II) and Zn(II) were estimated to be 113.6, 34.2 and 17.5 mg/g, respectively at 25°C and pH 6. The maximum removal efficiencies were 100% for Pb(II) at pH 7, 100% for Cu(II) at pH 8, and 80% for Zn(II) at pH 8. The used adsorbents were readily regenerated using dilute HC1 solution, indicating that red loess has a high reusability. All the above results demonstrated that red loess could be used as a possible alternative low-cost adsorbent for the removal of heavy metals from aqueous solution.     

A laboratory scale study on arsenic（Ⅴ） removal from aqueous medium using calcined bauxite ore

The present work deals with the As（Ⅴ） removal from an aqueous medium by calcined refractory grade bauxite （CRB） as a function of solution pH, time, As（Ⅴ） concentration and temperature. The residual As（Ⅴ） was lowered from 2 mg/L to below 0.01 mg/L in the optimum pH range 4.0-7.0 using a 5 g/L CRB within 3 h contact time. The adsorption data fits well with Langmuir isotherm and yielded Langmuir monolayer capacity of 1.78 mg As（Ⅴ）/g of CRB at pH 7.0. Presence of anions such as silicate and phosphate decreased As（Ⅴ） adsorption efficiency. An increase temperature resulted a decrease in the amount of As（Ⅴ） adsorbed by 6%. The continuous fixed bed column study showed that at the adsorbent bed depth of 30 cm and residence time of 168 min, the CRB was capable of treating 340 bed volumes of As（V） spiked water （C0 = 2 mg/L） before breakthrough （Ce = 0.01 mg/L）. This solid adsorbent, although not reusable, can be considered for design of adsorption columns as an efficiency arsenic adsorption media.     

石棉摩擦材料废弃物制吸附剂对染料的吸附研究

以石棉摩擦材料加工废弃物为材料制得的吸附剂,在色度５０００倍溶液中对阳离子黄Ｘ－５ＧＬ的静态吸附量为１５９．６８ｍｇ／ｇ,在色度５００倍的溶液中对阳离子艳蓝ＲＬ的静态吸附量为７９．６８ｍｇ／ｇ;对毛纺厂腈纶染缸废水的处理量可达２８０ｍｌ／ｇ,对活性染料亦有较好的吸附效果,吸附饱和吸附剂可通过后处理实现资源化。     

新型Fe3O4@SA/La复合凝胶微球的制备及吸附性能

将海藻酸钠（SA）、Fe₃O₄和La（Ⅲ）离子通过溶液反应法制得一种新型磁性海藻酸镧复合凝胶微球（Fe₃O₄@SA/La）,采用扫描电子显微镜（SEM）、X射线衍射（XRD）及红外光谱（FT-IR）等进行表征.以直接红棕RN（DRB RN）和直接深棕2M（DDB 2M）2种直接染料为吸附对象,考察了染料溶液pH值、吸附时间和温度对吸附剂性能的影响.结果表明：在吸附剂投加量为0.1g、染料溶液自然pH值条件下,Fe₃O₄@SA/La复合凝胶微球室温下对DDB 2M和DRB RN均有良好的吸附性,120min即可达吸附平衡,吸附量分别可达678和688mg/g.吸附过程符合拟二级吸附动力学方程,等温吸附符合Freundlich模型.吸附剂对2种染料的吸附热力学参数（ΔG<0、ΔH<0、ΔS>0）表明吸附反应均为混乱度增加的自发放热反应.     

水稻秸秆阴离子吸附剂的制备及其性能的研究

为了合理利用我国过剩的水稻秸秆,同时解决水体富营养化问题,将水稻秸秆通过化学修饰合成得到阴离子吸附剂,探究其对磷的去除效果.通过测定带电情况、比表面积、扫描电镜、红外光谱,分析该阴离子吸附剂的性能;同时考察了吸附剂投加量、磷酸根溶液初始pH值、温度等因素对吸附效果的影响,并分析了修饰后的水稻秸秆对磷酸根的吸附机理.结果表明:吸附剂投加量为5g/L,pH值为4~10时,对磷酸根的吸附效果最好,去除率达90%以上,而温度对吸附效果影响不大;Langmuir模型适用于修饰后的水稻秸秆对磷酸根的吸附,最大的吸附量达1.96mmol/g.     

多壁碳纳米管对水中五氯苯酚的吸附性能研究

碳纳米管作为新型碳材料,具有独特的一维管状的微结构特性,使它具有优异的吸附性能,近几年受到研究者的高度重视。文章采用催化裂解法制备多壁碳纳米管,先经空气纯化,再以浓硝酸-浓硫酸氧化,将其用于处理水中难降解多氯代有机物-五氯苯酚。经透射电镜和比表面积分析表明,碳纳米管纯度高,孔隙均匀,内径为30nm左右,比表面积为150m2/g。考察碳纳米管对五氯苯酚的吸附性能和主要影响因素结果表明:碳纳米管对五氯苯酚吸附平衡时间为1h,是活性炭的1/10,吸附速率常数为0.0994min-1;吸附等温线符合Freundlich型;随着温度的升高,碳纳米管对五氯苯酚的吸附量减小;pH在4～10时随pH增加碳纳米管对五氯苯酚的吸附降低,pH大于10之后又上升,存在最低吸附量的pH值。     

烟梗黄原酸酯吸附铜离子性能研究

以废烟梗为原料,通过制备烟梗黄原酸酯对废烟梗进行化学改性,并用其吸附Cu^2＋。考察了搅拌速度,吸附剂用量,pH,温度,粒度,Cu^2＋初始浓度和吸附时间对吸附量的影响,发现各种参数对Cu^2＋的吸附都有影响。对于50mg／L的Cu^2＋,吸附平衡时间为10min,吸附量为19．30mg／g,Cu^2＋去除率可达96％。室温下吸附Cu^2＋时,可以用拟二级动力学模型描述。结果表明,化学改性的废烟梗去除Cu^2＋具有良好的应用前景。     

巯基乙胺改性蛭石对水体中Ag(I)的吸附性能研究

用巯基乙胺(MEA)来改性天然蛭石,并利用FTIR、BET、TG-DSC等手段对蛭石和改性蛭石进行表征,分析结果显示MEA成功负载到蛭石上.同时,研究改性蛭石对Ag+的吸附性能,结果表明,经过巯基乙胺改性后蛭石的吸附能力得到较大提升Ag+的去除率从20%提升到79%,吸附大约在200min达到平衡,吸附剂最佳投加量为2g/L左右,pH值在6~12范围内都有较好的吸附效果.Langmuir等温吸附模型和准二级动力学模型能够很好的解释VER和MEA-VER对Ag+的吸附过程.VER和MEA-VER对Ag+的吸附机理主要有电荷吸附和配位吸附.