Pb(II) removal from water using Fe-coated bamboo charcoal with the assistance of microwaves

Bamboo charcoal(BC) was used as starting material to prepare iron-modified bamboo charcoal(Fe-MBC) by its impregnation in FeCl 3 and HNO 3 solutions simultaneously,followed by microwave heating.The material can be used as an adsorbent for Pb(Ⅱ) contaminants removal in water.The composites were prepared with Fe molar concentration of 0.5,1.0 and 2.0 mol/L and characterized by means of N 2 adsorption-desorption isotherms,X-ray diffraction spectroscopy(XRD),scanning electron microscopy coupled with energy dispersive X-ray spectrometry(SEM-EDS),Fourier transform infrared(FT-IR) and point of zero charge(pH pzc) measurements.Nitrogen adsorption analyses showed that the BET specific surface area and total pore volume increased with iron impregnation.The adsorbent with Fe molar concentration of 2 mol/L(2Fe-MBC) exhibited the highest surface area and produced the best pore structure.The Pb(Ⅱ) adsorption process of 2Fe-MBC and BC were evaluated in batch experiments and 2Fe-MBC showed an excellent adsorption capability for removal Pb(Ⅱ).The adsorption of Pb(Ⅱ) strongly depended on solution pH,with maximum values at pH 5.0.The ionic strength had a significant effect on the adsorption at pH < 6.0.The adsorption isotherms followed the Langmuir isotherm model well,and the maximum adsorption capacity for Pb(Ⅱ) was 200.38 mg/g for 2Fe-MBC.The adsorption processes were well fitted by a pseudo second-order kinetic model.Thermodynamic parameters showed that the adsorption of Pb(Ⅱ) onto Fe-MBC was feasible,spontaneous,and exothermic under the studied conditions,and the ion exchange mechanism played an significant role.These results have important implications for the design of low-cost and effective adsorbents in the removal of Pb(Ⅱ) from wastewater.     

Removal of Cd2+ from water by Friedel’s salt (FS: 3CaO.Al2O3·CaCl2·10H2O): Sorption characteristics and mechanisms

The development of low-cost and efficient new mineral adsorbents has been a hot topic in recent years. In this study, Friedel’s salt (FS:3CaO·A12O3 ·CaCl2 ·10H2O), a hexagonal layered inorganic absorbent, was synthesized to remove Cd2+ from water. The adsorption process was simulated by Langmuir and Freundlich models. The adsorption mechanism was further analyzed with TEM, XRD, FT-IR analysis and monitoring of metal cations released and solution pH variation. The results indicated the adsorbent FS had an outstanding ability for Cd(Ⅱ) adsorption. The maximum adsorption capacity of the FS for Cd(Ⅱ) removal can reach up to 671.14 mg/g. The nearly equal numbers of Cd2+ adsorbed and Ca2+ released demonstrated that ion-exchange (both surface and inner) of the FS for Cd(Ⅱ) played an important role during the adsorption process. Furthermore, the surface of the FS after adsorption was microscopically disintegrated while the inner lamellar structure was almost unchanged. The behavior of Cd(Ⅱ) adsorption by FS was significantly affected by surface reactions. The mechanisms of Cd2+ adsorption by the FS mainly included surface complexation and surface precipitation. In the present study, the adsorption process was fitted better by the Langmuir isotherm model (R2 = 0.9999) than the Freundlich isotherm model (R2 = 0.8122). Finally, due to the high capacity for ion-exchange on the FS surface, FS is a promising layered inorganic adsorbent for the removal of Cd(Ⅱ) from water.     

Rapid adsorption of toxic Pb(Ⅱ) ions from aqueous solution using multiwall carbon nanotubes synthesized by microwave chemical vapor deposition technique

Multiwall carbon nanotubes(MWCNTs) were synthesized using a tubular microwave chemical vapor deposition technique, using acetylene and hydrogen as the precursor gases and ferrocene as catalyst. The novel MWCNT samples were tested for their performance in terms of Pb(Ⅱ)binding. The synthesized MWCNT samples were characterized using Fourier Transform Infrared(FT-IR), Brunauer, Emmett and Teller(BET), Field Emission Scanning Electron Microscopy(FESEM) analysis, and the adsorption of Pb(Ⅱ) was studied as a function of p H,initial Pb(Ⅱ) concentration, MWCNT dosage, agitation speed, and adsorption time, and process parameters were optimized. The adsorption data followed both Freundlich and Langmuir isotherms. On the basis of the Langmuir model, Qmaxwas calculated to be 104.2 mg/g for the microwave-synthesized MWCNTs. In order to investigate the dynamic behavior of MWCNTs as an adsorbent, the kinetic data were modeled using pseudo first-order and pseudo second-order equations. Different thermodynamic parameters, viz., ΔH0, ΔS0and ΔG0were evaluated and it was found that the adsorption was feasible, spontaneous and endothermic in nature. The statistical analysis revealed that the optimum conditions for the highest removal(99.9%) of Pb(Ⅱ) are at p H 5, MWCNT dosage 0.1 g, agitation speed 160 r/min and time of 22.5 min with the initial concentration of 10 mg/L. Our results proved that microwave-synthesized MWCNTs can be used as an effective Pb(Ⅱ) adsorbent due to their high adsorption capacity as well as the short adsorption time needed to achieve equilibrium.     

Biosorption mechanisms involved in immobilization of soil Pb by Bacillus subtilis DBM in a multimetal-contaminated soil

Mechanisms of soil Pb immobilization by Bacillus subtilis DBM, a bacterial strain isolated from a heavy-metal-contaminated soil, were investigated. Adsorption and desorption experiments with living bacterial cells as well as dead cells revealed that both extracellular adsorption and intracellular accumulation were involved in the Pb2＋removal from the liquid phase. Of the sequestered Pb（II）, 8.5% was held by physical entrapment within the cell wall, 43.3% was held by ion-exchange, 9.7% was complexed with cell surface functional groups or precipitated on the cell surface, and 38.5% was intracellularly accumulated.Complexation of Pb2＋with carboxyl, hydroxyl, carbonyl, amido, and phosphate groups was demonstrated by Fourier transform infrared spectroscopic analysis. Precipitates of Pb5（PO4）3OH, Pb5（PO4）3Cl and Pb10（PO4）6（OH）2that formed on the cell surface during the biosorption process were identified by X-ray diffraction analysis. Transmission electron microscopy–energy dispersive spectroscopic analysis confirmed the presence of the Pb（II）precipitates and that Pb（II） could be sequestered both extracellularly and intracellularly.Incubation with B. subtilis DBM significantly decreased the amount of the weak-acid-soluble Pb fraction in a heavy-metal-contaminated soil, resulting in a reduction in Pb bioavailability, but increased the amount of its organic-matter-bound fraction by 71%. The ability of B.subtilis DBM to reduce the bioavailability of soil Pb makes it potentially useful for bacteria-assisted phytostabilization of multi-heavy-metal-contaminated soil.     

Amino-functionalized core-shell magnetic mesoporous composite microspheres for Pb(II) and Cd(II) removal

Amino-functionalized Fe3O4@mesoporous SiO/ core-shell composite microspheres NH2-MS in created in multiple synthesis steps have been investigated for Pb（Ⅱ） and Cd（Ⅱ） adsorption. The microspheres were characterized by transmission electron microscope （TEM）, scanning electron microscope （SEM）, N2 adsorption-desorption, zeta potential measurements and vibrating sample magnetometer. Batch adsorption tests indicated that NH2-MS exhibited higher adsorption affinity toward Pb（Ⅱ） and Cd（Ⅱ） than MS did. The Langmuir model could fit the adsorption isotherm very well with maximum adsorption capacity of 128.21 and 51.81 mg/g for Pb（Ⅱ） and Cd（Ⅱ）, respectively, implying that adsorption processes involved monolayer adsorption. Pb（Ⅱ） and Cd（Ⅱ） adsorption could be well described by the pseudo second-order kinetics model, and was found to be strongly dependent on pH and humic acid. The Pb（Ⅱ）- and Cd（Ⅱ）-loaded microspheres were effectively desorbed using 0.01 mol/L HC1 or EDTA solution. NH2-MS have promise for use as adsorbents in the removal of Pb（Ⅱ） and Cd（Ⅱ） in wastewater treatment processes.     

Adsorption of lead on multi-walled carbon nanotubes with different outer diameters and oxygen contents: Kinetics, isotherms and thermodynamics

The effects of different outer diameters and surface oxygen contents on the adsorption of heavy metals onto six types of multi-walled carbon nanotubes (MWCNTs) were investigated in an aqueous solution and lead was chosen as a model metal ion. The results indicated that the percentage removal and adsorption capacity of lead remarkably increased with decreasing outer diameter due to larger specific surface area (SSA). The SSA-normalized maximum adsorption capacity (qm /SSA) and SSA-normalized adsorption coefficient (Kd /SSA) were strongly positively correlated with surface oxygen content, implying that lead adsorption onto MWCNTs significantly increases with the rise of oxygen content and decreases with decreasing SSA. The calculated thermodynamic parameters indicated that adsorption of lead on MWCNTs was endothermic and spontaneous. When the oxygen content of MWCNTs increased from 2.0% to 5.9%, the standard free energy (△ G0 ) became more negative, which implied that the oxygenated functional groups increased the adsorption affinity of MWCNTs for lead. Through calculation of enthalpy (△ H0 ), G0 and free energy of adsorption (Ea ), lead adsorption onto MWCNTs was recognized as a chemisorption process. The chemical interaction between lead and the phenolic groups of MWCNTs could be one of the main adsorption mechanisms due to highly positive correlations between the phenolic groups and K d /SSA or q m /SSA.     

Pb（II） biosorption using chitosan and chitosan derivatives beads： Equilibrium, ion exchange and mechanism studies

The study examined the adsorption of Pb(II) ions from aqueous solution onto chitosan, chitosan-GLA and chitosan-alginate beads. Several important parameters influencing the adsorption of Pb(II) ions such as initial pH, adsorbent dosage and di erent initial concentration of Pb(II) ions were evaluated. The mechanism involved during the adsorption process was explored based on ion exchange study and using spectroscopic techniques. The adsorption capacities obtained based on non–linear Langmuir isotherm for chitosan, chitosan-GLA and chitosan-alginate beads in single metal system were 34.98, 14.24 and 60.27 mg/g, respectively. However, the adsorption capacity of Pb(II) ions were reduced in the binary metal system due to the competitive adsorption between Pb(II) and Cu(II) ions. Based on the ion exchange study, the release of Ca2+, Mg2+, K+ and Na+ ions played an important role in the adsorption of Pb(II) ions by all three adsorbents but only at lower concentrations of Pb(II) ions. Infrared spectra showed that the binding between Pb(II) ions and the adsorbents involved mostly the nitrogen and oxygen atoms. All three adsorbents showed satisfactory adsorption capacities and can be considered as an e cient adsorbent for the removal of Pb(II) ions from aqueous solutions.     

Simultaneous adsorption of As(Ⅲ) and Pb(Ⅱ) by the iron-sulfur codoped biochar composite:Competitive and synergistic effects

Simultaneous elimination of As(Ⅲ) and Pb(Ⅱ) from wastewater is still a great challenge.In this work,an iron-sulfur codoped biochar (Fe/S-BC) was successfully fabricated in a simplified way and was applied to the remediate the co-pollution of As(Ⅲ) and Pb(Ⅱ).The positive enthalpy indicated that the adsorption in As-Pb co-pollution was an endothermic reaction.The mechanism of As(Ⅲ) removal could be illustrated by surface complexation,oxidation and precipitation.In addition to precipitation and com...     

Synthesis of linear low-density polyethylene-g-poly (acrylic acid)-co-starch/organo-montmorillonite hydrogel composite as an adsorbent for removal of Pb(Ⅱ) from aqueous solutions

The purpose of this work is to remove Pb(II) from the aqueous solution using a type of hydrogel composite. A hydrogel composite consisting of waste linear low density polyethylene, acrylic acid, starch, and organo-montmorillonite was prepared through emulsion polymerization method. Fourier transform infrared spectroscopy (FTIR), Solid carbon nuclear magnetic resonance spectroscopy (CNMR)), silicon^-29 nuclear magnetic resonance spectroscopy (Si NMR)), and X-ray diffraction spectroscope ((XRD) were applied to characterize the hydrogel composite. The hydrogel composite was then employed as an adsorbent for the removal of Pb(II) from the aqueous solution. The Pb(II)-loaded hydrogel composite was characterized using Fourier transform infrared spectroscopy (FTIR)), scanning electron microscopy (SEM)), and X-ray photoelectron spectroscopy ((XPS)). From XPS results, it was found that the carboxyl and hydroxyl groups of the hydrogel composite participated in the removal of Pb(II). Kinetic studies indicated that the adsorption of Pb(II) followed the pseudo-second-order equation. It was also found that the Langmuir model described the adsorption isotherm better than the Freundlich isotherm. The maximum removal capacity of the hydrogel composite for Pb(II) ions was 430 mg/g. Thus, the waste linear low-density polyethylene-g-poly (acrylic acid)-co-starch/organo-montmorillonite hydrogel composite could be a promising Pb(II) adsorbent.     

Removal of bromate ion using powdered activated carbon

Bromate ion (BrO 3) removal from drinking water by powdered activated carbons (PAC S) in bath mode was evaluated under various operational conditions.Six kinds of PACs,including wood-based carbon,fruit-based carbon,coal-based carbon,and these three carbons thermally deoxidized in a nitrogen atmosphere,were selected to investigate their capacity on BrO 3 removal.With the highest zeta potential value and being richly mesoporous,coal-based carbon had a high and an excellent BrO 3 adsorption efficiency.The removal content of BrO 3 by per gram of coal-based carbon was 0.45 mg within 5 hr in 100 μg/L bromate solution.The surface characteristics of PACs and bromide formation revealed that both physical and chemical PACs properties simultaneously affected the adsorptionreduction process.Under acidic conditions,PAC S possessed high zeta value and adequate basic groups and exhibited neutral or positive charges,promoting BrO 3 adsorption-reduction on the carbon surface.Interestingly,the PAC S thermally deoxidized in N 2 atmosphere optimized their properties,e.g.increasing their zeta values and decreasing the oxygen content which accelerated the BrO 3 removal rate.The maximum adsorption capacity of fruit-based carbon was the highest among all tested carbons (99.6 mg/g),possibly due to its highest pore volume.Remarkably,the thermal regeneration of PACs in N 2 atmosphere could completely recover the adsorption capacity of PACs.The kinetic data obtained from carbons was analyzed using pseudo second-order and intraparticle diffusion models,with results showing that the intraparticle diffusion was the more applicable model to describe adsorption of BrO 3 onto PACs.     

废茶活性炭脱硫脱硝性能的应用研究

为探讨废茶活性炭对于SO2和NO脱除作用的制约因素,分别考察了材料孔径结构、石墨化程度及表面结构对其脱硫脱硝性能的影响,同时研究了其吸附机制及动力学过程.结果表明,较高的石墨化程度是影响材料脱硫性能的主要因素,微孔径较小且含氮碱性基团较高时有利于SO2的脱除;发达的中孔结构是制约NO脱除效率的关键因素,含氮碱性基团对NO的脱除具有一定的促进作用;烟气中SO2和NO共存时,材料的脱硫脱硝性能均有所降低,氧气和水蒸气的加入能够改善其脱硫脱硝效率;废茶活性炭在无水环境下对于SO2和NO的吸附作用均以物理吸附为主,水蒸气的存在促进了材料对SO2的化学吸附;通过动力学模型的拟合发现,Bangham吸附模型能够很好地描述材料脱硫脱硝的动力学过程,其R2均高于0.989,材料对于SO2和NO的吸附速率常数均随氧气和水蒸气的加入而减小.     

表面活性剂改性沸石对水中酚类化合物吸附性能研究

使用表面活性剂对2种粉煤灰合成沸石进行改性处理,研究改性沸石对酚类化合物（苯酚、对氯酚和双酚A）的吸附特性.吸附试验结果表明,合成沸石经过阳离子表面活性剂十六烷基三甲基溴化铵改性后,对酚类化合物的吸附性能均有大幅提升,吸附等温线模型均较符合Langmuir模型.2种改性沸石对酚类化合物（苯酚、对氯酚和双酚A）的Langmuir理论最大吸附量分别可达37.7、52.36、90.9 mg.g-1和10.71、22.83、56.8 mg.g-1.当溶液pH值高于酚类化合物的解离系数pKa时,吸附效果随pH升高而增加.结果还表明,酚类化合物的疏水性（辛醇/水分配系数Kow）越强,改性沸石的吸附能力也越高.     

Simultaneous removal of Cu(II) and Cr(VI) by Mg–Al–Cl layered double hydroxide and mechanism insight

Mg–Al–Cl layered double hydroxide (Cl-LDH) was prepared to simultaneously remove Cu(II) and Cr(VI) from aqueous solution. The coexisting Cu(II) (20 mg/L) and Cr(VI) (40 mg/L) were completely removed within 30 min by Cl-LDH in a dosage of 2.0 g/L; the removal rate of Cu(II) was accelerated in the presence of Cr(VI). Moreover, compared with the adsorption of single Cu(II) or Cr(VI), the adsorption capacities of Cl-LDH for Cu(II) and Cr(VI) can be improved by 81.05% and 49.56%, respectively, in the case of coexisting Cu(II) (200 mg/L) and Cr(VI) (400 mg/L). The affecting factors (such as solution initial pH, adsorbent dosage, and contact time) have been systematically investigated. Besides, the changes of pH values and the concentrations of Mg²⁺ and Al³⁺ in relevant solutions were monitored. To get the underlying mechanism, the Cl-LDH samples before and after adsorption were thoroughly characterized by X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. On the basis of these analyses, a possible mechanism was proposed. The coadsorption process involves anion exchange of Cr(VI) with Cl⁻ in Cl-LDH interlayer, isomorphic substitution of Mg²⁺ with Cu²⁺, formation of Cu₂Cl(OH)₃ precipitation, and the adsorption of Cr(VI) by Cu₂Cl(OH)₃. This work provides a new insight into simultaneous removal of heavy metal cations and anions from wastewater by Cl-LDH.     

Adsorption of Mn2+ from aqueous solution using Fe and Mn oxide-coated sand

The adsorption of Mn²⁺ onto immobilized Mn-oxide and Fe-oxide adsorbent such as manganese oxide-coated sand1 (MOCS1), manganese oxide-coated sand2 (MOCS2), iron oxide-coated sand2 (IOCS2), and manganese and iron oxide-coated sand (MIOCS) was investigated. The effects of pH (5.5 to 8.0) and temperature (25 to 45℃) on the equilibrium capacity were examined. Equilibrium studies showed that there is a good fit with both Freundlich and Langmuir isotherm, which indicates surface heterogeneity and monolayer adsorption of the adsorbents. Kinetic data showed high correlation with the pseudo second-order model, which signifies a chemisorption-controlled mechanism. The activation energies, activation parameters (ΔG^*, ΔH^*, ΔS^*), and thermodynamic parameters (ΔG⁰, ΔH⁰, ΔS⁰) confirmed that adsorption with MIOCS was endothermic and more spontaneous at higher temperature while an opposite trend was observed for the other adsorbents. Thermodynamic studies showed that adsorption involved formation of activated complex, where MOCS1 and MIOCS follow a physical-chemical mechanism, while MOCS2 and IOCS2 follows purely chemical mechanism.     

磁性高分子复合水凝胶的制备及其对水中铜离子的吸附性能

以海藻酸钠和聚乙烯醇为骨架负载磁性纳米Fe_3O_4颗粒合成了两种磁性高分子复合水凝胶材料:一种是以Ca~(2+)交联制备的磁性海藻酸钙单网络水凝胶(SAPFe),另一种是以海藻酸钙和聚乙烯醇经循环冷冻解冻制成的磁性双网络水凝胶(DAPFe).利用SEM、FTIR、BET对合成的材料进行表征,并研究了SAPFe和DAPFe对Cu~(2+)的吸附性能.结果表明,DAPFe比表面积达89.01 m~2·g~(-1),平均孔径为2.2 nm,DAPFe比SAPFe具有更低的含水率、更高的交联程度、更发达的孔隙结构和更高的比表面积.DAPFe对Cu~(2+)的最大吸附量可达207.01 mg·g~(-1),远大于SAPFe(173.01 mg·g~(-1)).SAPFe和DAPFe对Cu~(2+)的吸附等温线均符合Langmuir模型,吸附动力学符合准二级吸附动力学模型.通过分析SAPFe和DAPFe吸附Cu~(2+)前后官能团的变化,发现磁性高分子复合水凝胶具有丰富的羧基和羟基功能性官能团,并通过与Cu~(2+)产生螯合作用实现去除.     

Effect of Na+ impregnated activated carbon on the adsorption of NH4+-N from aqueous solution

Two kinds of activated carbons modified by Na+ impregnation after pre-treatments involving oxidation by nitric acid or acidification by hydrochloric acid (denoted as AC/N-Na and AC/HCl-Na, respectively), were used as adsorbents to remove NH4+-N. The surface features of samples were investigated by BET, SEM, XRD and FT-IR. The adsorption experiments were conducted in equilibrium and kinetic conditions. Influencing factors such as initial solution pH and initial concentration were investigated. A possible mechanism was proposed. Results showed that optimal NH4+-N removal efficiency was achieved at a neutral pH condition for the modified ACs. The Langmuir isotherm adsorption equation provided a better fit than other models for the equilibrium study. The adsorption kinetics followed both the pseudo second-order kinetics model and intra-particle kinetic model. Chemical surface analysis indicated that Na+ ions form ionic bonds with available surface functional groups created by pre-treatment, especially oxidation by nitric acid, thus increasing the removal efficiency of the modified ACs for NH4+-N. Na+-impregnated ACs had a higher removal capability in removing NH4+-N than unmodified AC, possibly resulting from higher numbers of surface functional groups and better intra-particle diffusion. The good fit of Langmuir isotherm adsorption to the data indicated the presence of monolayer NH4+-N adsorption on the active homogenous sites within the adsorbents. The applicability of pseudo second-order and intra-particle kinetic models revealed the complex nature of the adsorption mechanism. The intra-particle diffusion model revealed that the adsorption process consisted not only of surface adsorption but also intra-particle diffusion.     

Adsorptive removal of heavy metal ions from industrial effluents using activated carbon derived from waste coconut buttons

Removal of heavy metal ions from industrial effluents by the activated carbon prepared by steam activation of waste coconut buttons through batch adsorption process.     

Hg0 removal from flue gas over different zeolites modified by FeCl3

The elemental mercury removal abilities of three different zeolites (NaA, NaX, HZSM-5) impregnated with iron (III) chloride were studied on alab-scale fixed-bed reactor. X-ray diffraction, nitrogen adsorption porosimetry, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and temperature programmed desorption (TPD) analy-ses were used to investigate the physicochemical properties. Results indicated that the pore structure and active chloride species on the surface of the samples are the key factors for physisorption and oxidation of Hg⁰, respectively. Relatively high surface area and micropore volume are beneficial to efficient mercury adsorption. The active Cl species generated on the surface of the samples were effective oxidants able to convert elemental mercury (Hg⁰) into oxidized mercury (Hg²⁺). The crystallization of NaCl due to the ion exchange effect during the impregnation of NaA and NaX reduced the number of active Cl species on the surface, and restricted the physisorption of Hg⁰. Therefore, the Hg⁰ removal efficiencies of the samples were inhibited. The TPD analysis revealed that the species of mercury on the surface of FeCl₃-HZSM-5 was mainly in the form of mercuric chloride(HgCl₂), while on FeCl₃-NaX and FeCl₃-NaA it was mainly mercuri coxide(HgO).     

Hg removal from flue gas over different zeolites modified by FeCl3

The elemental mercury removal abilities of three different zeolites (NaA, NaX, HZSM-5) impregnated with iron(III) chloride were studied on a lab-scale fixed-bed reactor. X-ray diffraction, nitrogen adsorption porosimetry, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and temperature programmed desorption (TPD) analyses were used to investigate the physicochemical properties. Results indicated that the pore structure and active chloride species on the surface of the samples are the key factors for physisorption and oxidation of Hg⁰, respectively. Relatively high surface area and micropore volume are beneficial to efficient mercury adsorption. The active Cl species generated on the surface of the samples were effective oxidants able to convert elemental mercury (Hg⁰) into oxidized mercury (Hg^2 +). The crystallization of NaCl due to the ion exchange effect during the impregnation of NaA and NaX reduced the number of active Cl species on the surface, and restricted the physisorption of Hg⁰. Therefore, the Hg⁰ removal efficiencies of the samples were inhibited. The TPD analysis revealed that the species of mercury on the surface of FeCl₃–HZSM-5 was mainly in the form of mercuric chloride (HgCl₂), while on FeCl₃–NaX and FeCl₃–NaA it was mainly mercuric oxide (HgO).     

环丙沙星在潮土中的吸附特性

为了探明环丙沙星在潮土中的吸附特性,采用静态吸附试验,研究了环丙沙星在潮土中的吸附动力学、等温吸附特性以及pH值对其吸附过程的影响.结果表明,环丙沙星在潮土中的吸附过程可分为快速吸附和慢速平衡2个阶段.整个吸附过程符合二级反应动力学方程,吸附常数为1.138×10-3～2.849×10-2kg.(min.mg)-1.环丙沙星的吸附等温线能够较好地符合Freundlich方程和Langmuir方程,其中Freundlich方程的拟合效果更佳,吸附容量(lgKf)为2.725.研究发现,在pH值为4～9条件下,环丙沙星的吸附参数对数值lgKd呈随pH的增加先增加后降低的趋势,当pH值为5时,潮土对环丙沙星的吸附效果最好,lgKd为3.11,强酸性和碱性条件均不利于潮土对环丙沙星的吸附.由此推断阳离子吸附可能是潮土对环丙沙星吸附的重要机制之一.