Multilateral energy lending and urban bias in autocracies: promoting fossil fuels

Energy demand is growing rapidly across the world, and international funding agencies like the World Bank have responded by emphasizing energy in their project portfolios. Some of these projects promote the use of fossil fuels, while others support cleaner forms of energy. For climate change mitigation, it is important to understand how international funders decide on the choice between fossil fuels and cleaner sources of energy. Examining the energy funding portfolios of the nine most important international funders for the years 2008-2011, we show that funding for fossil fuels has been concentrated in highly urbanized autocracies. Due to economies of scale, fossil fuels are suitable for generating heat and electricity for densely populated urban areas. Autocratic rulers are subject to urban bias in their policy formulation because the support of concentrated urban constituencies is key to an autocrat’s political survival, and in democracies environmental constituencies can effectively oppose fossil fuel projects.     

Climate change mitigation strategies in the forest sector: biophysical impacts and economic implications in British Columbia,Canada

Managing forests to increase carbon sequestration or reduce carbon emissions and using wood products and bioenergy to store carbon and substitute for other emission-intensive products and fossil fuel energy have been considered effective ways to tackle climate change in many countries and regions. The objective of this study is to examine the climate change mitigation potential of the forest sector by developing and assessing potential mitigation strategies and portfolios with various goals in British Columbia (BC), Canada. From a systems perspective, mitigation potentials of five individual strategies and their combinations were examined with regionally differentiated implementations of changes. We also calculated cost curves for the strategies and explored socio-economic impacts using an input-output model. Our results showed a wide range of mitigation potentials and that both the magnitude and the timing of mitigation varied across strategies. The greatest mitigation potential was achieved by improving the harvest utilization, shifting the commodity mix to longer-lived wood products, and using harvest residues for bioenergy. The highest cumulative mitigation of 421 MtCO₂e for BC was estimated when employing the strategy portfolio that maximized domestic mitigation during 2017–2050, and this would contribute 35% of BC’s greenhouse gas emission reduction target by 2050 at less than $100/tCO₂e and provide additional socio-economic benefits. This case study demonstrated the application of an integrated systems approach that tracks carbon stock changes and emissions in forest ecosystems, harvested wood products (HWPs), and the avoidance of emissions through the use of HWPs and is therefore applicable to other countries and regions.     

Modern Biomass Conversion Technologies

This article gives an overview of the state-of-the-art of key biomass conversion technologies currently deployed and technologies that may play a key role in the future, including possible linkage to CO₂ capture and sequestration technology (CCS). In doing so, special attention is paid to production of biofuels for the transport sector, because this is likely to become the key emerging market for large-scale sustainable biomass use. Although the actual role of bio-energy will depend on its competitiveness with fossil fuels and on agricultural policies worldwide, it seems realistic to expect that the current contribution of bio-energy of 40–55 EJ per year will increase considerably. A range from 200 to 300 EJ may be observed looking well into this century, making biomass a more important energy supply option than mineral oil today. A key issue for bio-energy is that its use should be modernized to fit into a sustainable development path. Especially promising are the production of electricity via advanced conversion concepts (i.e. gasification and state-of-the-art combustion and co-firing) and modern biomass derived fuels like methanol, hydrogen and ethanol from ligno-cellulosic biomass, which can reach competitive cost levels within 1–2 decades (partly depending on price developments with petroleum). Sugar cane based ethanol production already provides a competitive biofuel production system in tropical regions and further improvements are possible. Flexible energy systems, in which biomass and fossil fuels can be used in combination, could be the backbone for a low risk, low cost and low carbon emission energy supply system for large scale supply of fuels and power and providing a framework for the evolution of large scale biomass raw material supply systems. The gasification route offers special possibilities to combine this with low cost CO₂ capture (and storage), resulting in concepts that are both flexible with respect to primary fuel input as well as product mix and with the possibility of achieving zero or even negative carbon emissions. Prolonged RD&D efforts and biomass market development, consistent policy support and international collaboration are essential to achieve this.     

Development of multi-criteria decision making model for remanufacturing technology portfolio selection

Remanufacturing represents a business opportunity and in many cases a means to promote environmental sustainability. To help enterprises economically and effectively implement remanufacturing, a multi-criteria decision making (MCDM) model for selecting remanufacturing technology is developed. The model considers remanufacturing technology portfolios. The enterprise benefits associated with each portfolio, including economic and environmental benefits, are evaluated using six main criteria: cost, quality, time, service, resource consumption, and environmental impact. In addition, the synergies among the different types of technologies for each remanufacturing technology portfolio are also considered. The pair-wise comparison approach of Analytic Hierarchy Process (AHP) is employed for remanufacturing technology portfolio selection. An illustrative example is provided to lend insights into the application of this methodology.     

A giant termite from the Late Miocene of Styria, Austria (Isoptera)

A giant termite is described and figured from the Late Miocene of the Styrian Basin in southeastern Austria. Gyatermes styriensis gen. n. et sp. n. is represented by a relatively complete forewing, with basal scale. The fossil approximates in size the largest of all termites today and is the largest fossil termite on record. The presence of this species in the Late Miocene fauna of Europe indicates that climatic conditions were appropriate for the persistence of species and colonies requiring relatively stable, warm conditions. The genus is primitive in overall features but shares some similarity with the dampwood termites.     

First complete sauropod dinosaur skull from the Cretaceous of the Americas and the evolution of sauropod dentition

Sauropod dinosaur bones are common in Mesozoic terrestrial sediments, but sauropod skulls are exceedingly rare—cranial materials are known for less than one third of sauropod genera and even fewer are known from complete skulls. Here we describe the first complete sauropod skull from the Cretaceous of the Americas, Abydosaurus mcintoshi, n. gen., n. sp., known from 104.46 ± 0.95 Ma (megannum) sediments from Dinosaur National Monument, USA. Abydosaurus shares close ancestry with Brachiosaurus, which appeared in the fossil record ca. 45 million years earlier and had substantially broader teeth. A survey of tooth shape in sauropodomorphs demonstrates that sauropods evolved broad crowns during the Early Jurassic but did not evolve narrow crowns until the Late Jurassic, when they occupied their greatest range of crown breadths. During the Cretaceous, brachiosaurids and other lineages independently underwent a marked diminution in tooth breadth, and before the latest Cretaceous broad-crowned sauropods were extinct on all continental landmasses. Differential survival and diversification of narrow-crowned sauropods in the Late Cretaceous appears to be a directed trend that was not correlated with changes in plant diversity or abundance, but may signal a shift towards elevated tooth replacement rates and high-wear dentition. Sauropods lacked many of the complex herbivorous adaptations present within contemporaneous ornithischian herbivores, such as beaks, cheeks, kinesis, and heterodonty. The spartan design of sauropod skulls may be related to their remarkably small size—sauropod skulls account for only 1/200th of total body volume compared to 1/30th body volume in ornithopod dinosaurs.     

CO<Subscript>2</Subscript> Mitigation and Renewable Oil from Photosynthetic Microbes: A New Appraisal

The only major strategy now being seriously considered for biological mitigation of atmospheric CO₂ relies entirely on terrestrial plants. Photosynthetic microbes were the focus of similar consideration in the 1990s. However, two major government-sponsored research programs in Japan and the USA concluded that the requisite technology was not feasible, and those programs were terminated after investing US$117 million and US$25 million, respectively. We report here on the results of a privately funded US$20 million program that has engineered, built, and successfully operated a commercial-scale (2 ha), modular, production system for photosynthetic microbes. The production system couples photobioreactors with open ponds in a two-stage process – a combination that was suggested, but never attempted – and has operated continuously for several years to produce Haematococcus pluvialis. The annually averaged rate of achieved microbial oil production from H. pluvialis is equivalent to <420 GJ ha ^-1 yr^-1, which exceeds the most optimistic estimates of biofuel production from plantations of terrestrial ``energy crops.' The maximum production rate achieved to date is equivalent to 1014 GJ ha^-1 yr^-1. We present evidence to demonstrate that a rate of 3200 GJ ha^-1 yr^-1 is feasible using species with known performance characteristics under conditions that prevail in the existing production system. At this rate, it is possible to replace reliance on current fossil fuel usage equivalent to ∼300 EJ yr^-1 – and eliminate fossil fuel emissions of CO₂ of ∼6.5 GtC yr^-1 – using only 7.3% of the surplus arable land projected to be available by 2050. By comparison, most projections of biofuels production from terrestrial energy crops would require in excess of 80% of surplus arable land. Oil production cost is estimated at $84/bbl, assuming no improvements in current technology. We suggest enhancements that could reduce cost to $50/bbl or less.     

灼烧净水污泥对外源磷的吸附和固定作用

研究了不同投加方式下(混匀和覆盖)灼烧净水污泥对外源磷的累积吸附效果,以及吸附外源磷后底泥等温吸附效果和在厌氧条件下内源磷释放情况.结果表明,混匀和覆盖条件下,底泥对上覆水中磷的累积吸附量分别为11.496 mg和11.042 mg,明显高于对照实验(7.219 mg).通过对吸附外源磷后的底泥进行等温吸附实验,发现混匀条件和覆盖条件下磷最大吸附量(Smax)均有所增加,并且前者(7.795 mg·g~(-1))要高于后者(6.807 mg·g~(-1)),但磷平衡浓度(EPC0)前者(0.83mg·L~(-1))却明显大于后者(0.64 mg·L~(-1)),表明混匀条件下内源磷更容易释放.在厌氧环境下,混匀方式内源磷释放量仅为0.93 mg,不仅低于覆盖(1.49 mg),也明显低于对照实验(7.76 mg).覆盖条件下比释放速率的平均值(0.006 14)大于混匀(0.003 96),并均低于对照实验.这说明混匀对内源磷的持留能力更强.暗示了单纯用EPC0值来评价底泥对磷的固定能力是不妥的.     

Energy Resources and Conversion Technologies for the 21st Century

A variety of energy sources will compete to provide the energy services that humans will require over the next 100 years. The balance of these sources will depend upon the availability of fossil fuels and the development of new technologies including renewable energy technologies, and will be one of the keys in projecting greenhouse gas emissions. There is uncertainty about each of the energy sources. With oil, for example, there are two alternate views of future reserves, one that reserves are geologically limited and that supplies will decline within a decade or two, the other that there are enormous quantities of hydrocarbon in the earth’s crust and that reserves are a function of developing technology and price. With solar voltaics, as a second example, there is optimism that the technology will become increasingly competitive, but there is uncertainty about the rate at which costs can come down and about ultimate cost levels. This paper reviews the reserves of fossil fuels and the prospects for nuclear power and the renewables. It also reviews the main energy conversion technologies that are available now or are expected to become increasingly available through time. However, it should be noted that, over a time horizon of 100 years, there may be quite radical changes in both production and conversion technologies that cannot be predicted and it is quite possible for some as yet unheard of technology to be developed and to transform the markets. The paper has been written to aid the development of new scenarios for the emission of greenhouse gases for the Intergovernmental Panel on Climate Change.     

Co-benefits of a carbon tax in Nepal

This paper analyzes the co-benefits of introducing a time variant carbon (C) tax scheme in Nepal, a hydropower resourceful country, by using a bottom up integrated energy system model based on the MARKet ALlocation (MARKAL) framework with time horizon of 2005–2050. It discusses the effects of C tax on energy mix, environmental emissions, energy supply security, energy efficiency, energy system cost, and employment benefit. The study shows that the C tax (that gradually increases from US13/tCO < sub > 2 < /sub > e in 2015 to US 13/tCO₂e in 2015 to US 200/tCO₂e by 2050) results in a reduction of the cumulative emission of greenhouse gases by 83.9 million tons CO₂e (12%) as compared to that in the base case. With the introduction of the C tax, there would be a need for additional hydropower capacity of 945 MW by 2050 as compared to the capacity in the base case. The emission of local pollutants consisting of sulphur dioxide (SO₂), nitrogen oxides (NO_x) and non-methane volatile organic compound (NMVOC) in 2050 would be reduced by 12%, 7% and 1% respectively under the C tax scenario. Total amount of imported energy would decrease by 13%, which corresponds to a reduction in discounted net fuel import cost by 5% during the study period. Furthermore, the C tax would result in new employment generation of 151 thousand man-years associated with the additional hydropower capacity requirement.     

Hydrogen and transportation: alternative scenarios

If hydrogen (H₂) is to significantly reduce greenhouse gas emissions and oil use, it needs to displace conventional transport fuels and be produced in ways that do not generate significant greenhouse gas emissions. This paper analyses alternative ways H₂ can be produced, transported and used to achieve these goals. Several H₂ scenarios are developed and compared to each other. In addition, other technology options to achieve these goals are analyzed. A full fuel cycle analysis is used to compare the energy use and carbon (C) emissions of different fuel and vehicle strategies. Fuel and vehicle costs are presented as well as cost-effectiveness estimates. Lowest hydrogen fuel costs are achieved using fossil fuels with carbon capture and storage. The fuel supply cost for a H₂ fuel cell car would be close to those for an advanced gasoline car, once a large-scale supply system has been established. Biomass, wind, nuclear and solar sources are estimated to be considerably more expensive. However fuel cells cost much more than combustion engines. When vehicle costs are considered, climate policy incentives are probably insufficient to achieve a switch to H₂. The carbon dioxide (CO₂) mitigation cost would amount to several hundred US$ per ton of CO₂. Energy security goals and the eventual need to stabilize greenhouse gas concentrations could be sufficient. Nonetheless, substantial development of related technologies, such as C capture and storage will be needed. Significant H₂ use will also require substantial market intervention during a transition period when there are too few vehicles to motivate widely available H₂ refueling.

Algal biofuel production and mitigation potential in India

Energy and energy services are the backbone of growth and development in India and is increasingly dependent upon the use of fossil based fuels that lead to greenhouse gases (GHG) emissions and related concerns. Algal biofuels are being evolved as carbon (C)-neutral alternative biofuels. Algae are photosynthetic microorganisms that convert sunlight, water and carbon dioxide (CO₂) to various sugars and lipids Tri-Acyl-Glycols (TAG) and show promise as an alternative, renewable and green fuel source for India. Compared to land based oilseed crops algae have potentially higher yields (5?C12 g/m²/d) and can use locations and water resources not suited for agriculture. Within India, there is little additional land area for algal cultivation and therefore needs to be carried out in places that are already used for agriculture, e.g. flooded paddy lands (20 Mha) with village level technologies and on saline wastelands (3 Mha). Cultivating algae under such conditions requires novel multi-tier, multi-cyclic approaches of sharing land area without causing threats to food and water security as well as demand for additional fertilizer resources by adopting multi-tier cropping (algae-paddy) in decentralized open pond systems. A large part of the algal biofuel production is possible in flooded paddy crop land before the crop reaches dense canopies, in wastewaters (40 billion litres per day), in salt affected lands and in nutrient/diversity impoverished shallow coastline fishery. Mitigation will be achieved through avoidance of GHG, C-capture options and substitution of fossil fuels. Estimates made in this paper suggest that nearly half of the current transportation petro-fuels could be produced at such locations without disruption of food security, water security or overall sustainability. This shift can also provide significant mitigation avenues. The major adaptation needs are related to socio-technical acceptance for reuse of various wastelands, wastewaters and waste-derived energy and by-products through policy and attitude change efforts.     

Reconciling Emissions Trading with a Technology-Based Response to Potential Abrupt Climate Change

It has been shown that preparedness to respond effectively to imminent abrupt climate change, getting CO₂ levels down towards pre-industrial in a few decades, involves the promotion of specific technology types that can be the basis for a negative emissions energy system (Read and Lermit 2003/5). In particular, Bio-Energy technologies linked to technologies for CO₂ Capture and Storage (BECS) or to other carbon disposal technologies, if done on a sufficiently large scale, can achieve this result given a context of policy urgency that also yields advances in energy efficiency and the take up of ambient energy technologies (wind, solar, etc.) in line with low emissions energy scenarios (e.g. the fossil free energy scenario developed by the Tellus Institute for Greenpeace International (Lazarus et al. 1993). It has also been shown (Read 1999, 2000, 2000a) that, if account is taken of inter-temporal beneficial learning externalities, it is efficient to reward innovation in policy-desirable technology types (e.g. through project-based schemes that embody such technology types) by a greater amount than the penalty on emissions. Such dynamic efficiency can be achieved through establishing a secondary market for project based credits exchanged for a number of emissions permits M(t) (M > 1 for t < H, the time horizon for policy) and with the variation of M(t) over time corresponding to the dynamically efficient path. This results in the incentive for project based emissions reductions being M(t) times greater than the penalty on emissions. By making use of the initial allocation of permits in each time period, an aspect of emissions permit trading that has no efficiency function under either auctioning or ‘grand-fathering’, this arrangement enables project based credits to be administered flexibly whilst ensuring the integrity of the emissions cap. The purpose of this article is to link these two bodies of work to show how a dynamically efficient response to the threat of abrupt climate change can be implemented in a way that is compatible with the response to gradual climate change that has been negotiated in the Kyoto Protocol. The design of such a dynamically efficient mechanism is considered, having as its objective the promotion of the two technology types mentioned above. A particular institutional model for implementing such a mechanism is described that mimics managerial behaviour in the adoption of new technology, avoids the additionality requirement that burdens the operation of the CDM in its current form, and aims to achieve ‘industry friendliness’ as a necessary condition of effective implementation.     

Carbon storage versus fossil fuel substitution: a climate change mitigation option for two different land use categories based on short and long rotation forestry in India

Short rotation bioenergy crops for energy production are considered an effective means to mitigate the greenhouse effect, mainly due to their ability to substitute fossil fuels. Alternatively, carbon can be sequestered and stored in the living biomass. This paper compares the two land use categories (forest land and non-forest land) for two management practices (short rotation vs. long rotation) to study mitigation potential of afforestation and fossil fuel substitution as compared to carbon storage. Significant carbon benefit can be obtained in the long run from using lands for growing short rotation energy crops and substituting fossil fuels by the biomass thus produced, as opposed to sequestering carbon in the biomass of the trees. When growth rates are high and harvest is used in a sustainable manner (i.e., replanting after every harvest), the opportunities for net carbon reductions appear to be fossil fuel substitution, rather than storage in ecosystem biomass. Our results suggest that at year 100 a total of 216 Mg C ha⁻¹ is sequestered for afforestation/reforestation using long rotation sal (Shorea robusta Gaertn.f) species, as opposed to offset of 412 Mg C ha⁻¹ for carbon storage and fossil fuel substitution for short rotation poplar (Populus Deltoides Marsh) plantations. The bioenergy option results in a continuous stream of about 3 Mg C ha⁻¹ yr⁻¹ of carbon benefits per year on forest land and 4 Mg C ha⁻¹ yr⁻¹ on non-forest land. Earlier studies have shown that in India waste land availability for establishing energy plantations is in the range of 9.6 to 36.5 Mha. Thus, using the 758 Tg biomass per year generated from 9.6 Mha waste land gives a mitigation potential in the range of 227 to 303 Tg C per year for carbon storage and fossil fuel substitution from poplar plantation for substituting coal based power generation. Depending upon the land availability for plantation, the potential for energy generation is in the range of 11,370 PJ, possibly amounting to a bioenergy supply of 43% of the total projected energy consumption in 2015. Further studies are needed to estimate the mitigation potential of other species with different productivities for overall estimation of the economic feasibility and social acceptability in a tropical country like India.     

氢燃料电池汽车动力系统生命周期评价及关键参数对比

发展氢燃料电池汽车被认为是解决能源安全和环境污染问题的理想解决方案之一,为量化探究氢燃料电池汽车动力系统的化石能源消耗和排放情况,运用GaBi软件建模,以新能源汽车相关技术路线为参考,构建我国氢燃料电池汽车动力系统的数据清单并对其全生命周期化石能源消耗和全球变暖潜值情况进行定量评价计算和预测分析,对不同类型的双极板、不同能量控制策略和不同制氢方式对环境的影响分别进行了对比研究,并对关键数据进行了不确定分析.结果表明,预计到2030年我国每台氢燃料电池汽车动力系统生命周期的化石能源消耗量（ADP_f）、全球变暖潜值（GWP,以CO₂ eq计）和酸化潜值（AP,以SO₂ eq计）分别为1.35×10⁵ MJ、9108 kg和15.79 kg.动力系统生产制造阶段的化石能源消耗和全球变暖潜值均高于使用阶段,主要原因是燃料电池堆栈和储氢罐的制造过程.金属双极板、石墨复合双极板和石墨双极板的制造工艺中石墨复合双极板的综合环境效益最好.能量控制策略的优化会使得氢能消耗降低,当氢能消耗降低22.8%时,动力系统的生命周期化石能源消耗和全球变暖潜值分别降低10.4%和8.3%.相比于甲烷蒸气重整制氢,基于混合电网电解水制氢的动力系统生命周期全球变暖潜值高出53.7%[KG-*6],而基于水电电解水制氢降低39.6%.降低动力系统生命周期化石能源消耗和全球变暖潜值的措施包括优化能量控制策略降低氢能消耗、规模化发展可再生能源发电电解水制氢产业和聚焦突破燃料电池堆栈关键技术实现性能提升.     

Reconstructing the anatomy of the 42-million-year-old fossil †Mengea tertiaria (Insecta, Strepsiptera)

Fossilization in amber is unique in preserving specimens with microscopic fidelity; however, arthropod inclusions are rarely examined beyond the exoskeleton as this requires destructive sampling when traditional techniques are used. We report the first complete, digital 3D, non-destructive reconstruction of the anatomy of an insect fossil, a specimen of †Mengea tertiaria embedded in a 42-Ma Baltic amber. This was made possible using Synchrotron μ-CT. The species belongs to the stem group of the phylogenetically enigmatic and extremely specialized Strepsiptera. Most internal structures of the fossil are preserved, but small parts of the lumen had decayed due to incomplete infiltration of the resin. Data on internal organs provided additional information for resolving phylogenetic relationships. A sister group relationship between †Mengea and all extant lineages of the group was confirmed with characters previously not accessible. The newly gained information also yielded some insights in the biology of †Mengea and the early evolutionary history of Strepsiptera. The technique has a tremendous potential for a more accurate interpretation of diverse fossil arthropods preserved in ambers from 130 Ma to the present.     

The impact of climate change mitigation on water demand for energy and food: An integrated analysis based on the Shared Socioeconomic Pathways

Climate change mitigation, in the context of growing population and ever increasing economic activity, will require a transformation of energy and agricultural systems, posing significant challenges to global water resources. We use an integrated modelling framework of the water-energy-land-climate systems to assess how changes in electricity and land use, induced by climate change mitigation, impact on water demand under alternative socioeconomic (Shared Socioeconomic Pathways) and water policy assumptions (irrigation of bioenergy crops, cooling technologies for electricity generation). The impacts of climate change mitigation on cumulated global water demand across the century are highly uncertain, and depending on socioeconomic and water policy conditions, they range from a reduction of 15,000 km³ to an increase of more than 160,000 km³. The impact of irrigation of bioenergy crops is the most prominent factor, leading to significantly higher water requirements under climate change mitigation if bioenergy crops are irrigated. Differences in socioeconomic drivers and fossil fuel availability result in significant differences in electricity and bioenergy demands, in the associated electricity and primary energy mixes, and consequently in water demand. Economic affluence and abundance of fossil fuels aggravate pressures on water resources due to higher energy demand and greater deployment of water intensive technologies such as bioenergy and nuclear power. The evolution of future cooling systems is also identified as an important determinant of electricity water demand. Climate policy can result in a reduction of water demand if combined with policies on irrigation of bioenergy, and the deployment of non-water-intensive electricity sources and cooling types.     

Sustainable energy investments: contributions of the Global Environment Facility

Addressing energy, economic and environment security is a pressing challenge for nations worldwide. Global energy demand is projected to increase by 45% during the next 20 years, with the fastest growth in developing and transition countries. Over the past two decades, the Global Environment Facility (GEF) has invested in a portfolio of sustainable energy projects with an emphasis on energy efficiency, renewable energy, and urban transport. These projects address many different national priorities including infrastructure, technologies, policies, best practices, institutions, and capacity building. Since 1991, more than US2,735 billion has been invested in energy sector projects with an additional US2,735 billion has been invested in energy sector projects with an additional US17.118 billion in co-financing from governments and the private sector. US1,186 billion, together with US1,186 billion, together with US7,092 billion in co-finance, has been invested in energy efficiency projects that deploy new technologies, develop institutional and human capacity, disseminate best practices, and build public awareness and understanding. GEF renewable energy investments of US1,298 billion, with co-financing of US1,298 billion, with co-financing of US7,555 billion, have advanced demonstration and deployment of solar thermal heating, solar thermal power, photovoltaics, wind power, geothermal energy, small hydropower, biomass, and combined technologies and best practices across 5 continents. The GEF has invested US251 million (with US251 million (with US2,471 billion in co-finance) in urban transport projects that address transport strategies, infrastructure, and mobility technology solutions. These energy efficiency, renewable energy and urban transport projects contributed to the direct reduction of about 1.7 billion tons of greenhouse gas emissions. Other tangible environmental benefits also flowed from these GEF investments. Case studies of representative projects are presented to illustrate lessons learned from the energy efficiency, renewable, energy, and urban transport investments. Experiences from GEF investments can inform development and implementation of future sustainable energy investments.     

生物卵化石研究进展简述

卵生是动物界最普遍的繁殖方式,卵的孵化对繁殖季节突发的气候变化响应敏感,孵化成败又与生物种群数量变动和群落演替密切相关,因此卵化石具有重要的古生物学、古气候学、古生态学研究价值。但由于卵生动物种类十分丰富,卵形态特征多样,研究领域广泛,有必要总结梳理卵化石的研究进展。本文通过对主要卵生动物类群卵的形态特征,以及卵化石在古生物学、古气候学、古生态学方面研究进展的回顾,发现卵化石的研究主要集中在脊椎动物类群,为脊椎动物演化提供了重要证据,但是由于脊椎动物卵化石通常难以建立连续的长序列记录,其古生态学和古气候学研究极为不足。然而,无脊椎动物卵化石由于数量丰富,具有统计意义,其在古生态学、古气候学研究领域具有重要意义,但是其在古生物学,包括种属鉴定等方面的研究需要加强。在无脊椎动物中,蜗牛及其卵化石在黄土-古土壤地层中保存丰富且地层分布连续,最有可能建立卵化石的长序列。通过现代过程研究,明确蜗牛卵的气候指示意义,建立第四纪蜗牛卵化石长序列,发挥蜗牛卵化石的古气候学和古生态学研究价值,是亟需开展的研究工作。