Cadmium (Cd2+) removal by nano zerovalent iron: surface analysis, effects of solution chemistry and surface complexation modeling

Nano zerovalent iron (nZVI) is an effective remediant for removing various organic and inorganic pollutants from contaminated water sources. Batch experiments were conducted to characterize the nZVI surface and to investigate the effects of various solution properties such as pH, initial cadmium concentration, sorbent dosage, ionic strength, and competitive ions on cadmium removal by nZVI. Energy-dispersive X-ray and X-ray photoelectron spectroscopy results confirmed removal of Cd²⁺ ions by nZVI through adsorption. Cd²⁺ adsorption decreased in the presence of competitive cations in the order: Zn²⁺?>?Co²⁺?>?Mg²⁺?>?Mn²⁺?=?Cu²⁺?>?Ca²⁺?>?Na²⁺?=?K⁺. Higher concentrations of Cl^? significantly decreased the adsorption. Cadmium removal increased with solution pH and reached a maximum at pH 8.0. The effects of various solution properties indicated Cd²⁺ adsorption on nZVI to be a chemisorption (inner-sphere complexation) process. The three surface complexation models (diffuse layer model, constant capacitance model, and triple layer model) fitted well to the adsorption edge experimental data indicating the formation of nZVI–Cd bidentate inner-sphere surface complexes. Our results suggest that nZVI can be effectively used for the removal of cadmium from contaminated water sources with varying chemical conditions.     

Nanoscale zero-valent iron (nZVI): aspects of the core-shell structure and reactions with inorganic species in water

Aspects of the core-shell model of nanoscale zero-valent iron (nZVI) and their environmental implications were examined in this work. The structure and elemental distribution of nZVI were characterized by X-ray energy-dispersive spectroscopy (XEDS) with nanometer-scale spatial resolution in an aberration-corrected scanning transmission electron microscope (STEM). The analysis provides unequivocal evidence of a layered structure of nZVI consisting of a metallic iron core encapsulated by a thin amorphous oxide shell. Three aqueous environmental contaminants, namely Hg(II), Zn(II) and hydrogen sulfide, were studied to probe the reactive properties and the surface chemistry of nZVI. High-resolution X-ray photoelectron spectroscopy (HR-XPS) analysis of the reacted particles indicated that Hg(II) was sequestrated via chemical reduction to elemental mercury. On the other hand, Zn(II) removal was achieved via sorption to the iron oxide shell followed by zinc hydroxide precipitation. Hydrogen sulfide was immobilized on the nZVI surface as disulfide (S(2)(2-)) and monosulfide (S(2-)) species. Their relative abundance in the final products suggests that the retention of hydrogen sulfide occurs via reactions with the oxide shell to form iron sulfide (FeS) and subsequent conversion to iron disulfide (FeS(2)). The results presented herein highlight the multiple reactive pathways permissible with nZVI owing to its two functional constituents. The core-shell structure imparts nZVI with manifold functional properties previously unexamined and grants the material with potentially new applications.     

Selective removal of heavy metals from metal-bearing wastewater in a cascade line reactor

Goal, Scope and Background This paper is a part of the research work on ‘Integrated treatment of industrial wastes towards prevention of regional water resources contamination — INTREAT’ the project. It addresses the environmental pollution problems associated with solid and liquid waste/effluents produced by sulfide ore mining and metallurgical activities in the Copper Mining and Smelting Complex Bor (RTB-BOR), Serbia. However, since the minimum solubility for the different metals usually found in the polluted water occurs at different pH values and the hydroxide precipitates are amphoteric in nature, selective removal of mixed metals could be achieved as the multiple stage precipitation. For this reason, acid mine water had to be treated in multiple stages in a continuous precipitation system-cascade line reactor. Materials and Methods All experiments were performed using synthetic metal-bearing effluent with chemical a composition similar to the effluent from open pit, Copper Mining and Smelting Complex Bor (RTB-BOR). That effluent is characterized by low pH (1.78) due to the content of sulfuric acid and heavy metals, such as Cu, Fe, Ni, Mn, Zn with concentrations of 76.680, 26.130, 0.113, 11.490, 1.020 mg/dm³, respectively. The cascade line reactor is equipped with the following components: for feeding of effluents, for injection of the precipitation agent, for pH measurements and control, and for removal of the process gases. The precipitation agent was 1M NaOH. In each of the three reactors, a changing of pH and temperature was observed. In order to verify efficiency of heavy metals removal, chemical analyses of samples taken at different pH was done using AES-ICP. Results Consumption of NaOH in reactors was 370 cm³, 40 cm³ and 80 cm³, respectively. Total time of the experiment was 4 h including feeding of the first reactor. The time necessary to achieve the defined pH value was 25 min for the first reactor and 13 min for both second and third reactors. Taking into account the complete process in the cascade line reactor, the difference between maximum and minimum temperature was as low as 6°C. The quantity of solid residue in reactors respectively was 0.62 g, 2.05 g and 3.91 g. In the case of copper, minimum achieved concentration was 0.62 mg/dm³ at pH = 10.4. At pH = 4.50 content of iron has rapidly decreased to < 0.1 mg/dm³ and maintained constant at all higher pH values. That means that precipitation has already ended at pH=4.5 and maximum efficiency of iron removal was 99.53%. The concentration of manganese was minimum at pH value of 11.0. Minimum obtained concentration of Zn was 2.18 mg/dm³ at a pH value of 11. If pH value is higher than 11, Zn can be re-dissolved. The maximum efficiency of Ni removal reached 76.30% at a pH value of 10.4. Discussion Obtained results show that efficiency of copper, iron and manganese removal is very satisfactory (higher than 90%). The obtained efficiency of Zn and Ni removal is lower (72.30% and 76.31%, respectively). The treated effluent met discharge water standard according to The Council Directive 76/464/EEC on pollution caused by certain dangerous substances into the aquatic environment of the Community. Maximum changing of temperature during the whole process was 6°C. Conclusion This technology, which was based on inducing chemical precipitation of heavy metals is viable for selective removal of heavy metals from metal-bearing effluents in three reactor systems in a cascade line. Recommendations and Perspectives The worldwide increasing concern for the environment and guidelines regarding effluent discharge make their treatment necessary for safe discharge in water receivers. In the case where the effluents contain valuable metals, there is also an additional economic interest to recover these metals and to recycle them as secondary raw materials in different production routes. ESS-Submission Editor: PhD Hailong Wang, hailong.wang@ensisjv.com     

Citric acid-modified Fenton's reaction for the oxidation of chlorinated ethylenes in soil solution systems

Fenton's reagent, a solution of hydrogen peroxide and ferrous iron catalyst, is used for an in situ chemical oxidation of organic contaminants. Sulfuric acid is commonly used to create an acidic condition needed for catalytic oxidation. Fenton's reaction often involves pressure buildup and precipitation of reaction products, which can cause safety hazards and diminish efficiency. We selected citric acid, a food-grade substance, as an acidifying agent to evaluate its efficiencies for organic contaminant removal in Fenton's reaction, and examined the impacts of using citric acid on the unwanted reaction products. A series of batch and column experiments were performed with varying H2O2 concentrations to decompose selected chlorinated ethylenes. Either dissolved iron from soil or iron sulfate salt was added to provide the iron catalyst in the batch tests. Batch experiments revealed that both citric and sulfuric acid systems achieved over 90% contaminant removal rates, and the presence of iron catalyst was essential for effective decontamination. Batch tests with citric acid showed no signs of pressure accumulation and solid precipitations, however the results suggested that an excessive usage of H2O2 relative to iron catalysts (Fe2+/H2O2<1/330) would result in lowering the efficiency of contaminant removal by iron chelation in the citric acid system. Column tests confirmed that citric acid could provide suitable acidic conditions to achieve higher than 55% contaminant removal rates.     

Enhanced degradation of ortho-nitrochlorobenzene by the combined system of zero-valent iron reduction and persulfate oxidation in soils

ortho-Nitrochlorobenzene (o-NCB) in soil poses significant health risks to human because of its persistence and high toxicity. The removal of o-NCB by both zero-valent iron (ZVI) and chemical oxidation (persulfate) was investigated by batch experiments. The o-NCB removal rate increases significantly from 15.1 to 97.3 % with an increase of iron dosage from 0.1 to 1.0 mmol g^?1. The o-NCB removal rate increases with the decrease of the initial solution pH, and a removal efficiency of 90.3 % is obtained at an initial pH value of 6.8 in this combined system. It is found that temperature and soil moisture could also increase the o-NCB removal rate. The o-NCB degradation rate increases from 83.9 to 96.2 % and from 41.5 to 82.4 % with an increase of temperature (15 to 35 °C) and soil moisture (0.25 to 1.50 mL g^?1), respectively. Compared to the persulfate oxidation system and ZVI system, the persulfate–iron system shows high o-NCB removal capacity. o-NCB removal rates of 41.5 and 62.4 % are obtained in both the persulfate oxidation system and the ZVI system, while the removal rate of o-NCB is 90.3 % in the persulfate–iron system.     

Effective adsorbent for arsenic removal: core/shell structural nano zero-valent iron/manganese oxide

Recently, nano zero-valent iron (nZVI) has emerged as an effective adsorbent for the removal of arsenic from aqueous solutions. However, its use in various applications has suffered from reactivity loss resulting in a decreased efficiency. Thus, the aim of this study was to develop an effective arsenic adsorbent as a core/shell structural nZVI/manganese oxide (or nZVI/Mn oxide) to minimize the reactivity loss of the nZVI. As the major result, the arsenic adsorption capacities of the nZVI/Mn oxide for As(V) and As(III) were approximately two and three times higher than that of the nZVI, respectively. In addition, the As(V) removal efficiency of the nZVI/Mn oxide was maintained through 4 cycles of regeneration whereas that of the nZVI was decreased significantly. The enhanced reactivity and reusability of the nZVI/Mn oxide can be successfully explained by the synergistic interaction of the nZVI core and manganese oxide shell, in which the manganese oxides participate in oxidation reactions with corroded Fe²⁺ and subsequently retard the release of aqueous iron providing additional surface sites for arsenic adsorption. In summary, this study reports the successful fabrication of a core/shell nZVI/Mn oxide as an effective adsorbent for the removal of arsenic from aqueous solutions.     

Complexation-flocculation of organic contaminants by the application of oxyhumolite-based humic organic matter

Control of hazardous organic micropollutants is a challenging water quality issue. Dissolved humic organic matter (DOM) isolated from oxyhumolite coal mined in Bohemia was investigated as a complexation agent to remove polycyclic aromatic hydrocarbons (PAHs) and functionalized phenols from water by a two-stage process involving complexation and flocculation. After the formation of humic-contaminant complexes, ferric salts were added resulting in the precipitation and flocculation of the DOM and the associated pollutants. Flocculation experiments with ferric ion coagulants indicated that precipitation of oxyhumolite DOM together with the complexed contaminants occurred at lower ferric ion concentrations than with the reference DOM in acidic environments (pH approximately 3.5). The complexation-flocculation removal rates for non-reactive PAHs characterized by small localization energies of pi-electrons correlated well with the complexation constants. On the other hand, the combined complexation-flocculation removal rates for activated PAHs including trans-stilbene, anthracene and 9-methyl anthracene, as well as functionalized polar phenols, were higher than predicted from the complexation coefficients. Methodological studies revealed for the first time that the ferric ion coagulant contributed to enhanced removal rates, most probably due to ferric ion-catalyzed pollutant degradation resulting in oxidized products.     

Coagulation settling characteristics and eliminating pollution analysis of fine-grind natural zeolite in static and turbulent flow

The phenomenon of coagulation settling in liquid suspensions has a variety of applications, including mineral processing, treatment of industrial effluents, and municipal sewage sludge purification. This study was to investigate the coagulation settling characteristics of fine-grind natural zeolite and evaluate the removal efficiency of contaminants simultaneously in static and turbulent flow. A series of column experiments were conducted to pattern the characteristics of spatial and temporal variation of coagulation settling and removal contaminants in static and turbulent flow. The results indicated that the suspended solid concentration presented an apparent exponential decay with coagulation settling time in static flow (R ² ?>?0.99), coagulation settling rate of the fine zeolite-suspended solid in static flow was between 0.005 and 0.05 cm/s obtained from the repeat depth suction method. The relation between average C/C ₀ of pollutants and suspended solid concentration was exponential before the settlement for 24 h and that was the line after the settlement for 24 h. Several various models were presented to highlight the coagulation settling characteristics of fine-grind natural zeolite in static and turbulent flow. Compared to hydrostatic settling experiments, zeolite-suspended solid presented better removal efficiency of pollutants and greater removal rate of pollutants in turbulent flow.     

Heterogeneous Fenton oxidation of Direct Black G in dye effluent using functional kaolin-supported nanoscale zero iron

This study investigated kaolin-supported nanoscale zero-valent iron (nZVI/K) as a heterogeneous Fenton-like catalyst for the adsorption and oxidation of an azo dye, Direct Black G (DBG). New findings suggest that kaolin as a support material not only reduced the aggregation of nanoscale zero-valent iron (nZVI) but also improved the adsorption of DBG. It consequently improved Fenton oxidation by increasing the local concentration of DBG in the vicinity of nZVI. This was confirmed by scanning electron microscopy and X-ray diffraction for the surface morphology of nZVI/K before and after the Fenton-like reaction. Furthermore, nZVI/K proved to be a catalyst for the heterogeneous Fenton-like oxidation of the DBG process in the neutral pH range. More than 87.22 % of DBG was degraded, and 54.60 % of total organic carbon was removed in the optimal conditions: 0.6 g/L dosage of nZVI/K, 33 mM H₂O₂, 100 mg/L initial DBG concentration, temperature of 303 K and pH of 7.06. Finally, it was demonstrated that nZVI/K removed DBG from dye wastewater through the processes of adsorption and oxidation.     

Effectiveness of zerovalent iron and nickel catalysts for degrading chlorinated solvents and n-nitrosodimethylamine in natural groundwater.

Laboratory batch experiments were performed to evaluate the effectiveness of nickel catalysts, nanoscale zerovalent iron (nZVI) doped with palladium, and microscale ZVI for treatment of tetrachloroethene, trichloroethene, and n-nitrosodimethylamine (NDMA) in soil-groundwater slurries. Results indicated that the presence of NDMA inhibited degradation of chlorinated solvents. Although both the nickel catalyst and nZVI were able to degrade NDMA in deionized water, neither of these metals was effective at degrading NDMA in the soil-groundwater system evaluated in this study. The effectiveness of the nickel catalyst and nZVI, with respect to treatment of the chlorinated solvents, also appeared to be highly dependent on the groundwater geochemical conditions. Overall results of this study suggest that the degradation mechanisms involving nickel catalysts and nZVI in natural soil/groundwater systems are not well-understood, and addition of metal catalysts to ZVI may not necessarily enhance observed degradation rates in natural systems.     

Accelerated seeded precipitation pre-treatment of municipal wastewater to reduce scaling

Membrane based treatment processes are very effective in removing salt from wastewater, but are hindered by calcium scale deposit formation. This study investigates the feasibility of removing calcium from treated sewage wastewater using accelerated seeded precipitation. The rate of calcium removal was measured during bench scale batch mode seeded precipitation experiments at pH 9.5 using various quantities of calcium carbonate as seed material. The results indicate that accelerated seeded precipitation may be a feasible option for the decrease of calcium in reverse osmosis concentrate streams during the desalination of treated sewage wastewater for irrigation purposes, promising decreased incidence of scaling and the option to control the sodium adsorption ratio and nutritional properties of the desalted water. It was found that accelerated seeded precipitation of calcium from treated sewage wastewater was largely ineffective if carried out without pre-treatment of the wastewater. Evidence was presented that suggests that phosphate may be a major interfering substance for the seeded precipitation of calcium from this type of wastewater. A pH adjustment to 9.5 followed by a 1-h equilibration period was found to be an effective pre-treatment for the removal of interferences. Calcium carbonate seed addition at 10 g l⁻¹ to wastewater that had been pre-treated in this way was found to result in calcium precipitation from supersaturated level at 60 mg l⁻¹ to saturated level at 5 mg l⁻¹. Approximately 90% reduction of the calcium level occurred 5 min after seed addition. A further 10% reduction was achieved 30 min after seed addition.     

Hydrodechlorination of polychlorinated biphenyls in contaminated soil from an e-waste recycling area,using nanoscale zerovalent iron and Pd/Fe bimetallic nanoparticles

Soil pollution by polychlorinated biphenyls (PCBs) arising from the crude disposal and recycling of electronic and electrical waste (e-waste) is a serious issue, and effective remediation technologies are urgently needed. Nanoscale zerovalent iron (nZVI) and bimetallic systems have been shown to promote successfully the destruction of halogenated organic compounds. In the present study, nZVI and Pd/Fe bimetallic nanoparticles synthesized by chemical deposition were used to remove 2,2′,4,4′,5,5′-hexachlorobiphenyl from deionized water, and then applied to PCBs contaminated soil collected from an e-waste recycling area. The results indicated that the hydrodechlorination of 2,2′,4,4′,5,5′-hexachlorobiphenyl by nZVI and Pd/Fe bimetallic nanoparticles followed pseudo-first-order kinetics and Pd loading was beneficial to the hydrodechlorination process. It was also found that the removal efficiencies of PCBs from soil achieved using Pd/Fe bimetallic nanoparticles were higher than that achieved using nZVI and that PCBs degradation might be affected by the soil properties. Finally, the potential challenges of nZVI application to in situ remediation were explored.     

PBTCA稳定零价纳米铁的制备及其去除水中Cr(Ⅵ)

以2-膦酸丁烷-1,2,4三羧酸(PBTCA)为稳定剂,通过FeCl3.6H2O与NaBH4反应,利用液相还原法制备稳定纳米级零价铁颗粒(P-NZVI),并用透射电子显微镜(TEM)、扫描电子显微镜(SEM)及X射线衍射(XRD)进行表征,颗粒平均粒径为73 nm。考察了Cr(Ⅵ)溶液初始浓度、pH、NZVI投加量、温度等条件对Cr(Ⅵ)去除效果的影响,并与同等条件下不加稳定剂制备的纳米铁(N-NZVI)进行对比。结果表明:Cr(Ⅵ)的去除率随温度和纳米铁投加量增加而升高,随pH和Cr(Ⅵ)溶液初始浓度升高而降低。在相同实验条件下,P-NZVI对Cr(Ⅵ)的去除效果明显优于N-NZVI,表明改性后纳米铁在地表水原位修复领域具有较好的应用前景。     

Photooxidation of arsenite by natural goethite in suspended solution

Iron and arsenic have been found to coexist in a water environment and the fate of arsenite in the aquatic system is influenced by iron. Goethite is a form of iron hydroxide, which is commonly found in sediments. In previous studies, we have used iron complexes to degrade organic pollutants. Results have shown that some organic pollutants could be totally degraded by iron complexes and our work indicated that iron might cause conversion of arsenic when irradiated. This work attempts to investigate the conversion of arsenite [As(III)] using natural goethite, as the iron source, to quantify the effect of various factors on photooxidation. We also consider the possible mechanism for photooxidation of As(III) using a suspension of natural goethite. The As(III) concentration variation under illumination was compared with the one in the dark to quantify the contribution of light to As(III) oxidation to As(V) in goethite suspended solution. The experiments under N₂ and air atmosphere confirmed the participation of dissolved oxygen. The photooxidation efficiency of As(III) under different conditions was compared to determine the effect of different environmental factors such as pH value, goethite concentration, and humic acid concentration on the photooxidation reaction. In the solution containing 100 μg L^?1 arsenite and 0.1 g?L^?1 suspended goethite at pH 3.0, nearly 80 % of As(III) was photooxidized after irradiation by a 250-W metal halogen lamp (λ?≥?313 nm) after 6 h. The effects of initial pH and goethite concentration and humic acid concentration were all examined. The results show that the greatest efficiency of photooxidation of As(III) was at pH 3.0. The extent of photooxidation decreased with increasing goethite concentration and fell sharply in the presence of humic acid under the conditions in this work. Although about 80 % of As(III) was photooxidized after irradiation by a 250-W halogen lamp at pH 3.0 in the presence of goethite suspension, photooxidation was also affected by factors such as pH, concentration of goethite, and presence of humic acid. The scavenger experiments showed that the HO? radical and photogenerated hole are the predominant oxidants in this system responsible for 87.1 % oxidation of As(III), while HO ₂ ^? /O ₂ ^?? is responsible for 12.9 % oxidation of As(III).     

Comparison of biotic and abiotic treatment approaches for co-mingled perchlorate, nitrate, and nitramine explosives in groundwater

Biological and abiotic approaches for treating co-mingled perchlorate, nitrate, and nitramine explosives in groundwater were compared in microcosm and column studies. In microcosms, microscale zero-valent iron (mZVI), nanoscale zero-valent iron (nZVI), and nickel catalyzed the reduction of RDX and HMX from initial concentrations of 9 and 1 mg/L, respectively, to below detection (0.02 mg/L), within 2 h. The mZVI and nZVI also degraded nitrate (3 mg/L) to below 0.4 mg/L, but none of the metal catalysts were observed to appreciably reduce perchlorate ( approximately 5 mg/L) in microcosms. Perchlorate losses were observed after approximately 2 months in columns of aquifer solids treated with mZVI, but this decline appears to be the result of biodegradation rather than abiotic reduction. An emulsified vegetable oil substrate was observed to effectively promote the biological reduction of nitrate, RDX and perchlorate in microcosms, and all four target contaminants in the flow-through columns. Nitrate and perchlorate were biodegraded most rapidly, followed by RDX and then HMX, although the rates of biological reduction for the nitramine explosives were appreciably slower than observed for mZVI or nickel. A model was developed to compare contaminant degradation mechanisms and rates between the biotic and abiotic treatments.     

Studies on removal of metal ions and sulphate reduction using rice husk and Desulfotomaculum nigrificans with reference to remediation of acid mine drainage

The utility of rice husk as an adsorbent for metal ions such as iron, zinc and copper from acid mine water was assessed. The adsorption isotherms exhibited Langmuirian behavior and were endothermic in nature. The free energy values for adsorption of the chosen metal ions onto rice husk were found to be highly negative attesting to favorable interaction. Over 99% Fe(3+), 98% of Fe(2+) and Zn(2+) and 95% Cu(2+) uptake was achieved from acid mine water, with a concomitant increase in the pH value by two units using rice husk. The remediation studies carried out on acid mine water and simulated acid mine water pretreated with rice husk indicated successful growth of Desulfotomaculum nigrificans (D. nigrificans). The amount of sulphate bioreduction in acid mine water at an initial pH of 5.3 was enhanced by D. nigrificans from 21% to 40% in the presence of rice husk filtrate supplemented with carbon and nitrogen. In simulated acid mine water with fortified husk filtrate, the sulphate reduction was even more extensive, with an enhancement to 73%. Concurrently, almost 90% Fe(2+), 89% Zn(2+) and 75% Cu(2+) bioremoval was attained from simulated acid mine water. Metal adsorption by rice husk was confirmed in desorption experiments in which almost complete removal of metal ions from the rice husk was achieved after two elutions using 1M HCl. The possible mechanisms of metal ion adsorption onto rice husk and sulphate reduction using D. nigrificans are discussed.     

Rapid treatment of water contamined with atrazine and parathion with zero-valent iron.

The utility of fine-grained iron metal in the remediation of water contamined with Atrazine and Parathion was investigated. Batch procedures under water treatment conditions (ambient temperature and pH of approximately 7) indicated that these pesticides degrade rapidly in the presence of iron powder (40-60 mesh, 40 g/l). The decline in the concentration of pesticide was monitored by HPLC. Experiments with unbuffered solutions showed a steady increase in pH values during the reactions. Therefore, experiments were run in buffered solutions. Different buffered solutions resulted in different degradation rates indicating that the buffer plays an important role in enhancing the degradation process. Tests were also performed on an industrial effluent solution containing a variety of pesticides. Although the products of degradation were not characterized, our HPLC results indicated the disappearance of all the parent pollutants.     

多孔铁-碳-稀土合金填料对高盐废水中氯离子的去除

高盐废水是目前水处理领域的难点,主要研究了不同因素下多孔铁碳合金填料对氯离子的去除效果,及Cl-的去除机理。在进水pH为2,停留时间为60 min,Cl-浓度20 000 mg/L条件下进行实验,通过静态实验和连续实验确定Cl-主要去除途径为微电解过程引起的填料吸附。这种合金填料对实际高氯废水也有较好的处理效果,针对变性淀粉废水,在最优条件下填料对废水中氯离子有较强的吸附去除能力,同时COD去除率能达到57%,废水的可生化性得以大幅度提高。