Characterization and Identification of the Sources of Chromium, Zinc, Lead, Cadmium, Nickel, Manganese and Iron in Pm10 Particulates at the Two Sites of Kolkata, India

Monitoring of ambient PM₁₀ (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 μm aerodynamic diameter) has been done at residential (Kasba) and industrial (Cossipore) sites of an urban region of Kolkata during November 2003 to November 2004. These sites were selected depending on the dominant anthropogenic activities. Metal constituents of atmospheric PM₁₀ deposited on glass fibre filter paper were estimated using Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). Chromium (Cr), zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), manganese (Mn) and iron (Fe) are the seven toxic trace metals quantified from the measured PM₁₀ concentrations. The 24 h average concentrations of Cr, Zn, Pb, Cd, Ni, Mn and Fe from ninety PM₁₀ particulate samples of Kolkata were found to be 6.9, 506.1, 79.1, 3.3, 7.4, 2.4 and 103.6 ng/m³, respectively. The 24 h average PM₁₀ concentration exceeded national ambient air quality standard (NAAQS) as specified by central pollution control board, India at both residential (Kasba) and industrial (Cossipore) areas with mean concentration of 140.1 and 196.6 μg/m³, respectively. A simultaneous meteorology study was performed to assess the influence of air masses by wind speed, wind direction, rainfall, relative humidity and temperature. The measured toxic trace metals generally showed inverse relationship with wind speed, relative humidity and temperature. Factor analysis, a receptor modeling technique has been used for identification of the possible sources contributing to the PM₁₀. Varimax rotated factor analysis identified four possible sources of measured trace metals comprising solid waste dumping, vehicular traffic with the influence of road dust, road dust and soil dust at residential site (Kasba), while vehicular traffic with the influence of soil dust, road dust, galvanizing and electroplating industry, and tanning industry at industrial site (Cossipore).     

Environmental Monitoring and Impact Assessment of a Solid Waste Disposal Site

The objective of this study is an attempt to conduct an environmentalmonitoring and impact assessment of the On-Nooch solid waste disposal sitein Bangkok, Thailand. Four water and five air sampling stations (2 upwindand 3 downwind directions) were established at the site. Grab water samplesfrom leachate treatment plant and Khlong Song Hong, a nearby stream, werecollected during the rainy and dry seasons. Analytical results of the wastewater discharged by the leachate treatment plant, during dry season showedchemical oxygen demand: 618 mg/l; biochemical oxygen demand: 80 mg/l;suspended solid: 101 mg/l; Total Kjeldahl Nitrogen: 283 mg/l, which werestill higher than standard limit for effluents in Thailand. During the dryseason, results also showed widespread heavy metal pollution from leachate(chromium: 1.03 mg/l; manganese: 1.07 mg/l; mercury: 0.025 mg/l) and werehigher than the allowable level of heavy metals for the Industrial EffluentStandard in Thailand. The direct discharge of untreated leachate into inlandwater will cause considerable water pollution in the study area. Compositeair samples in this study area were collected during the rainy and dryseasons and were analyzed for methane (CH₄), carbon dioxide(CO₂), carbon monoxide (CO), sulphur dioxide(SO₂), nitrogen dioxide (NO₂) andsuspended particulate matter (SPM). The average concentration of SPM rangedbetween 0.1–0.36 mg/m³ for 24-hour average, dependingupon the season. The level of CH₄ and CO₂ inthe ambient air of the study area were found to be 3.48–65.71mg/m³ and 886-1758 mg/m³ respectively which weremuch higher than the normal concentration of CH₄ andCO₂ in the air (CH₄: 2.41 mg/m³;CO₂: 585 mg/m³). Hence, adverse health andenvironmental effects could be expected from water and air pollution.     

贵州东部某燃煤电厂汞排放对周边环境空气及土壤的影响

结合当地气象条件,测定贵州省东部某燃煤电厂下风向环境空气汞浓度分布情况,同时测定该燃煤电厂周边表层土壤中汞含量,并对其污染程度进行评价,探讨了土壤汞与理化性质间的相关性。结果表明,该燃煤电厂下风向环境空气汞浓度远高于北半球大气气态总汞背景值,空气汞浓度在2.7 km范围内随距离的增大而增大,在2.7~5.0 km范围内汞浓度随距离的增大而减小。电厂周边表层土壤汞含量是贵州省A层土壤Hg背景值的8.5倍,存在中度到重度程度的污染,土壤Hg与土壤pH呈正相关性,但与土壤有机质未表现出相关性。     

Air Pollution and Heat Exposure Study in the Workplace in a Glass Manufacturing Unit in India

Air pollution in the workplace environment due to industrial operation have been found to cause serious occupational health hazard. Similarly, heat stress is still most neglected occupational hazard in the tropical and subtropical countries like India. The hot climate augments the heat exposure close to sources like furnaces. In this study an attempt is made to assess air pollution and heat exposure levels to workers in the workplace environment in glass manufacturing unit located in the State of Gujarat, India. Samples for workplace air quality were collected for SPM, SO₂, NO₂ and CO₂ at eight locations. Results of workplace air quality showed 8-hourly average concentrations of SPM: 165–9118 μg/m³, SO₂: 6–9 μg/m³ and NO₂: 5–42 μg/m³, which were below the threshold limit values of workplace environment. The level of CO₂ in workplace air of the plant was found to be in the range 827–2886 μg/m³, which was below TLV but much higher than the normal concentration for CO₂ in the air (585 mg/m³). Indoor heat exposure was studied near the furnace and at various locations in an industrial complex for glass manufacturing. The heat exposure parameters including the air temperature, the wet bulb temperature, and the globe parameters were measured. The Wet Bulb Globe Temperature (WBGT), an indicator of heat, exceeded ACGIH TLVs limits most of the time at all the locations in workplace areas. The recommended duration of work and rest have also been estimated.     

Air Quality and Monitoring Strategy in the Helsinki Metropolitan Area, Finland

The Helsinki Metropolitan Area Council (YTV) is responsible for air quality monitoring in the Helsinki area. Air quality has been monitored periodically since the late 1950s. An automatic SO2 monitoring network was constructed in 1975 and TSP measurements were added in 1978. Since then the network has been expanded and currently five automatic multicomponent stations form the basis of the network monitoring SO2, NO, NO2, CO, PM10 and O3 concentrations. Manual TSP and PM10 measurements are also conducted. Mobile monitoring units are also being used as well as special measurement campaigns. The effects of air pollution on nature are studied in bioindicator monitoring. An air quality index is used in order to inform the public of the current air quality situation. Changes in air quality are reflected in monitoring strategy. SO2 concentrations have decreased in the past two decades. Annual averages in 1995 were at or below 5 µg/m3. Traffic is the major source for pollutants even though catalytic converters have lowered traffic emissions somewhat. The highest annual average NO2 concentration at an urban site was 49 µg/m3 in 1995, and there has been no clear change in NO2 levels. There has been a decreasing trend in CO concentrations. Maximum annual TSP and PM10 averages in 1995 were 92 and 32 µg/m3, respectively. The highest average lead concentration was 0.01 µg/m3. Elevated concentrations are experienced from time to time. During the spring daily TSP and PM10 concentrations can go up to around 300 and 150 µg/m3, respectively. This is caused by resuspension mainly due to street sanding. Also a major winter NO2 episode occurred in December 1995. The highest hourly NO2 concentrations reached 400 µg/m3.     

Characteristics of Hazardous Airborne Dust Around an Indian Surface Coal Mining Area

Surface coal mining creates more air pollution problems with respect to dust than underground mining . An investigation was conducted to evaluate the characteristics of the airborne dust created by surface coal mining in the Jharia Coalfield. Work zone air quality monitoring was conducted at six locations, and ambient air quality monitoring was conducted at five locations, for a period of 1 year. Total suspended particulate matter (TSP) concentration was found to be as high as 3,723 μg/m³, respirable particulate matter (PM10) 780 μg/m³, and benzene soluble matter was up to 32% in TSP in work zone air. In ambient air, the average maximum level of TSP was 837 μg/m³, PM10 170 μg/m³ and benzene soluble matter was up to 30%. Particle size analysis of TSP revealed that they were more respirable in nature and the median diameter was around 20 μm. Work zone air was found to have higher levels of TSP, PM10 and benzene soluble materials than ambient air. Variations in weight percentages for different size particles are discussed on the basis of mining activities. Anionic concentration in TSP was also determined. This paper concludes that more stringent air quality standards should be adopted for coal mining areas and due consideration should be given on particle size distribution of the air-borne dust while designing control equipment.     

Sources and distribution of trace metals in the saricay stream basin of southwestern turkey

Seasonal variation of the concentrations of trace metals (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn) were measured by ICP-AES in the water and sediment from the Saricay Stream, Geyik Dam and Ortakoy Well in the same basin. Comparisons between trace metal concentrations in water and sediment in three sources (Stream, Dam and Well) were made. The concentrations of a large number of trace metals in the water and sediment were generally higher in the Stream than in the Well and Dam, particularly in summer. Trace metal concentration ranges in sediments of the Saricay Stream and its sources showed very wide ranges (as mass ratio): Co: 5–476 μg g⁻¹, Cr: 15–1308 μg g⁻¹, Cu: 7–128 μg g⁻¹, Fe: 1120–13210 μg g⁻¹, Mn: 150–2613 μg g⁻¹, Ni: 102–390 μg g⁻¹, Pb: 0.7–31.3 μg g⁻¹ and Zn: 18–304 μg g⁻¹, whereas Cd was not detected. Trace metal concentration ranges found in waters were: Co: 9.5–20.7 μg L⁻¹, Cr: 20.3–284 μg L⁻¹, Cu: 170–840 μg L⁻¹, Fe: 176–1830 μg L⁻¹, Mn: 29.3–387 μg L⁻¹, and Ni: 4.3–21.9 μg L⁻¹. Among the trace metals studied, Cd and Zn in two seasons and Pb in winter were usually not detected or in the recommended levels. In addition, Cd was not detected in the sediment during the winter season. The analysis of variance (one-way ANOVA) and correlation matrix was employed for the sediment and water samples of the two field surveys (summer and winter) comparison. The three sources showed differences in metal contents. The metal levels in sediments displayed marked seasonal and regional variations, which were attributed to anthropogenic influences and natural processes. In the Saricay Stream, high values of metals during the dry season showed an anthropological effect from small industry firms, e.g.: an olive mill and a dairy farm or water dilution during summer seasons. Finally, the pollution in this basin probably originated from small industrial, low quality coal-burned thermal power plants, and particularly agricultural and domestic waste discharges.     

Assessment of trace metals using lichen transplant from automobile mechanic workshop in Ile-Ife metropolis,Nigeria

The level of air pollution around the automobile mechanic workshops has been generally overlooked. This study, examined the level of trace metals in automobile mechanic workshops and the suitability of using transplanted lichen thalli of Lepraria incana for measuring air pollution in such areas. Samples of the lichen thalli were transplanted into seven different sites and were attached to the bark of trees at each site. The samples were harvested from the sites after 3-month exposure. Concentrations of Pb, Cu, Cd, Fe, Zn, and S content were determined using an atomic absorption spectrophotometer. Results showed that there was a significant difference in the trace metals concentrations across the sites (p?<?0.05). The analyzed lichen samples showed a range of 91.26–119.35 ppm for Fe, 30.23–61.32 ppm for Zn, 1.25–2.45 ppm for Cu, 0.017–0.043 ppm for Cd, 0.018–0.051 ppm, and 0.37–0.42 ppm for S. From the study, sites 6 and 7 presented higher concentrations of Cd, Pb, and Zn than other sites. The enrichment factor calculated showed that Zn, Cd, and Pb were greatly enriched from the workshops. The trend in the concentration of these heavy metals suggests that activities in these workshops might become a major source of certain heavy metals in the environment and if the pollution activities persist, it might become worrisome over time.     

Bioccumulation and toxicity of Cu and Cd in Vallisneria spiralis (L.)

Accumulation of Cu and Cd by Vallisneria spiralis was studied under laboratory conditions. Plants showed ability to reduce 5 µg ml^–1 Cu background concentration to below 0.05 µg ml^–1 (m.p.l., WHO 1985) within 48 h. The Cd concentration of 1.0 µg ml^–1 was reduced to below m.p.l. (0.005 µg ml^–1) in 168 h. Cysteine synthesis was more under Cd stress condition. Both the metals were toxic to the plants at higher concentrations; more in the case of Cd.NBRI Rsearch Publication No. 417 (N.S.).     

Biomonitoring of heavy metals by pollen in urban environment

Abstract Industrial development and consumption of petroleum products leads to increase air pollution levels especially in urban and industrial areas. Heavy metal components associated with air pollutants have far reaching effects with respect to economic and ecological importance of pollens. The pollens are male reproductive organs of the plant and travel through air from flower to flower for pollination purpose. During this period they are exposed to air pollutants. Present investigation thus pertains to study of effect of air pollutants on pollens especially biosorption and bioaccumulation of heavy metals. The pollens of three commonly occurring plants namely Cassia siamea, Cyperus rotundus, Kigelia pinnata have been studied from the NH-6 of Nagpur city, India. The pollens exposed to polluted air showed the presence of higher concentrations of Ca, Al and Fe as compared to unexposed pollens. Higher concentration of these metals was observed in Cyperus rotundus followed by Cassia siamea and Kigelia pinnata. These results indicate that pollens act as good indicator of air pollution giving results in short time of exposure of 5–10 h. Apart from this, it is also reported that some of these metals play crucial role in the metabolic activity in pollens for example Calcium is necessary for growth of pollen tube and other metabolic activities in pollens. The presence of these metals in pollens may also enhance the allergenicity of the pollens. Similarly accumulation of heavy metals may also deteriorate the quality of pollen for their economical use. The viability of pollen is also affected by these pollutants in sensitive species leading to impairment of their fertility.     

On the Assessment of Sulphur Deposition on Forests Growing Over the Areas of Industrial Impact

A method of calculation of sulphur deposition values on forests subjectto long-term industrial influence is presented. Investigations wereconducted in the vicinities of nickel smelters of Kola peninsula. Sulphurdioxide (SO₂) is the major phytotoxicant emitted by theseenterprises. Depositions of sulphur were calculated on the basis of ground air layer pollution. To determine it a mathematical model was applied.Field surveys of forest ecosystems response to air contamination werecarried out and areas of different forest damage degree were identified.More than 4300 km² of the territory of Kola peninsula isunder the impact of nickel enterprises. Average SO₂concentration over the area of slight damage to forests is about 20µg/m³. It corresponds to the critical level proposed for forest ecosystems (UN ECE, 1993). Sulphur deposition over thearea of slight damage varies from 0.6 to 1.0 g/m²yr^-1 for coniferous forests. For deciduous forests it isabout 1.0 g/m² yr^-1. These values are close totarget loads for highly sensitive ecosystems (Nilsson et al., 1991), but they exceed critical loads for the northern regions of Europe (Downing etal., 1993).     

乌鲁木齐采暖期TSP、PM10、PM5、PM2.5中重金属污染水平评价

采用石墨炉原子吸收分光光度法、双道原子荧光光谱法研究乌鲁木齐市采暖期前期与后期不同粒径大气颗粒物(TSP、PM_(10)、PM_5、PM_(2.5))中Hg、As、Zn、Pb、Ni等5种重金属元素的质量浓度,并对重金属污染水平进行评价。Hg质量浓度为0.3~5.7 ng/m3;As质量浓度为15.3~122.5 ng/m~3;Zn质量浓度为298.0~1 686.5 ng/m~3;Pb质量浓度为0.5~88.8 ng/m~3;Ni质量浓度为10.4~25.5 ng/m~3。Igeo计算得出采暖期后期的TSP、PM_(10)、PM_5、PM_(2.5)中各重金属Igeo值均高于采暖期前期,其中Hg元素为严重污染;富集因子分析得出Hg、Zn元素的EFi值大于10,说明这些元素是人为源贡献。通过研究乌鲁木齐市不同时期、不同粒径大气颗粒物中各种重金属污染状况,为乌鲁木齐大气污染治理提供科学支持。     

Air quality and respiratory health in Delhi

Delhi is an instructive location for studying the impact of air pollution since it is a rapidly expanding centre of government, trade commerce and industry. We have made an attempt to (1) determine the association between environmental pollution and respiratory morbidity in Delhi for the period 1998–2004, (2) assess the impact on hospital admission of the implementation of recent governmental regulations and (3) calculate the relative risk of hospitalization due to respiratory ailments caused by air pollutants. Seven hospitals from different parts of Delhi were selected. The pollution profiles of these areas were assessed and subsequently Poisson regression model was performed for the patient population. There was a remarkable decrease in monthly average concentration of sulphur dioxide (from 17.9 to 11.1 μg m⁻³) and increase in monthly average concentration of nitrogen dioxide (from 34.2 to 49.1 μg m⁻³) after the newly introduced regulations. Particulates were observed to have marginal fall in their concentration but still remained above the permissible limits. Gaseous pollutants, in spite of being at a level lower than the permissible level, showed more consistent significant association with respiratory admissions. The relative risks of hospitalization due to respiratory diseases were in the range of 1.07–2.82 in residential cum commercial areas. Comparative study of pre and post new stringent governmental regulation showed significant positive association of NO₂ with respiratory disorders in southern (RR: 1.10; CI: 1.09–1.12) and northern regions (RR: 1.33; CI: 1.27–1.39), both mixed use areas. In spite of the improvement in the air quality, the associated health effects were found to be substantial.     

Effects of the Heavy Metals Copper and Zinc on Zooxanthellae Cells in Culture

The growth of symbiotic algal cells (zooxanthellae) isolated from the coral, Montipora verrucosa under the influence of the heavy metals copper (Cu) and Zinc (Zn) was investigated. Zooxanthellae cells cultured in f/2 enriched seawater medium were subjected to a maximum Cu level of 42µg.l-1, Zn concentration of 509µg.l-1, and various combinations of the two metals, in ecotoxicological bioassays lasting up to 28 days. A Cu level of 40µg.l-1 caused significantly depressed specific growth rates of cell cultures obtained using a standard growth model. Low concentrations of the metals Cu and Zn in combination elicited synergistic effects of sublethal toxicity. The use of cultured zooxanthellae cells in bioassays investigating sublethal effects of heavy metal stress has relevant applications in the field of pollution monitoring.     

Distribution of PM2.5 and PM10-2.5 in PM10 Fraction in Ambient Air Due to Vehicular Pollution in Kolkata Megacity

This research paper aims at establishing baseline PM₁₀ and PM_2.5 concentration levels, which could be effectively used to develop and upgrade the standards in air pollution in developing countries. The relative contribution of fine fractions (PM_2.5) and coarser fractions (PM_10-2.5) to PM₁₀ fractions were investigates in a megacity which is overcrowded and congested due to lack of road network and deteriorated air quality because of vehicular pollution. The present study was carried out during the winter of 2002. The average 24h PM₁₀ concentration was 304 μg/m³, which is 3 times more than the Indian National Ambient Air Quality Standards (NAAQS) and higher PM₁₀ concentration was due to fine fraction (PM_2.5) released by vehicular exhaust. The 24h average PM_2.5 concentration was found 179 μg/m³, which is exceeded USEPA and EU standards of 65 and 50 μg/m³ respectively for the winter. India does not have any PM_2.5 standards. The 24 h average PM_10-2.5 concentrations were found 126 μg/m³. The PM_2.5 constituted more than 59% of PM₁₀ and whereas PM₁₀-PM_2.5 fractions constituted 41% of PM₁₀. The correlation between PM₁₀ and PM_2.5 was found higher as PM_2.5 comprised major proportion of PM₁₀ fractions contributed by vehicular emissions.     

Heavy metals in urban ambient PM10 and soil background in eight cities around China

The ambient PM₁₀ and background soil samples were collected and analyzed with ICP-AES in eight cities around China to investigate the levels of ten heavy metals (Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, and Pb). The mean concentrations of ten heavy metals in PM₁₀ of the eight cities of China followed the order of Zn?>?Pb?>?Mn?>?Cu?>?Ni?>?Cr?>?Co?>?V. The metals in the ambient PM₁₀ and soil were compared in each city to evaluate the heavy metal mass fraction from anthropogenic sources in ambient air. The CD values in these cities were all above 0.2, indicating that the ingredients spectrums of PM₁₀ and soil vary markedly. Most heavy metals were enriched in PM₁₀, except Fe and Ti. The results showed that almost all the cities suffer important heavy metal pollution from anthropogenic sources. The eight cities were also grouped according to their similarity in heavy metals of ambient PM₁₀ by cluster analysis to investigate the relationship between the heavy metals and the pollution sources of each city. The conclusion was that the eight cities were divided into three clusters which had similar industrial type and economy scale: the first cluster consisted of Shenzhen, Wuxi, and Guiyang; followed by Jinan and Zhengzhou as the second grouping; and the third group had Taiyuan, Urumqi, and Luoyang.     

Beryllium Concentrations in Ambient Air and Its Source Identification

Beryllium concentrations in atmospheric particulate and soil samples in and around a Beryllium Processing Facility (BPF) have been measured. The mean air concentration level of beryllium in and around the fence line of the BPF is 0.48 ± 0.43 ng m^-3 (n = 397) and is mostly influenced by diurnaland seasonal changes. The observed air concentration levelswere well below the prescribed ambient air quality (AAQ)standard of 10 ng m^-3. The soil concentration levels ofberyllium in the study area were found to be in the range of 1.42–2.75 g g^-1. The mass median aerodynamic diameter (MMAD)of beryllium aerosols in ambient air was found to be 6.9 m.Source identification using the Enrichment Factor (EF) approachindicates soil as the predominant contributory source for air concentrations at the site.     

The effect of metals and ammonia on SO2 oxidation to sulphates in the ambient air

The effect of metals and ammonia on the relationship between mass concentrations of sulphur dioxide and sulphate in the air was studied near an aluminium plant over a 1-year period. Sulphur dioxide, sulphates and ammonia in the air as well as metals (Pb, Fe, Mn, Zn, Cu, Cd and Al) in the deposit were measured at four measuring sites.The levels of mass concentrations of SO₂ were low at all measuring sites while the levels of mass concentrations of sulphates in the air and concentrations of metals in the deposit were high. The levels of ammonia were found to decrease in relationship to the distance from the source of pollution.The relationship between the mass concentrations of sulphate and SO₂ can be described by the equation y=ax ^b ;where y is the percentage of sulphate sulphur in the total sulphur (sulphate and SO₂) and x is the mass concentration of the total sulphur in the air. The values of the coefficients a and b are characteristic of individual areas.As the results show the coefficients a and b obtained at a measuring site close to the plant and outside the urban area are characteristic of an industrial area. At control sites in the urban area the coefficients are characteristic of an urban area. At the measuring site close to the industrial zone and the centre of the urban area the interaction of the effects occurs. Therefore, the coefficient a is characteristic of an urban area and b of an industrial one.     

Assessment of indoor and outdoor particulate air pollution at an urban background site in Iran

The relationship between indoor and outdoor particulate air pollution was investigated at an urban background site on the Payambar Azam Campus of Mazandaran University of Medical Sciences in Sari, Northern Iran. The concentration of particulate matter sized with a diameter less than 1 μm (PM_1.0), 2.5 μm (PM_2.5), and 10 μm (PM₁₀) was evaluated at 5 outdoor and 12 indoor locations. Indoor sites included classrooms, corridors, and office sites in four university buildings. Outdoor PM concentrations were characterized at five locations around the university campus. Indoor and outdoor PM measurements (1-min resolution) were conducted in parallel during weekday mornings and afternoons. No difference found between indoor PM₁₀ (50.1 ± 32.1 μg/m³) and outdoor PM₁₀ concentrations (46.5 ± 26.0 μg/m³), indoor PM_2.5 (22.6 ± 17.4 μg/m³) and outdoor PM_2.5 concentration (22.2 ± 15.4 μg/m³), or indoor PM_1.0 (14.5 ± 13.4 μg/m³) and outdoor mean PM_1.0 concentrations (14.2 ± 12.3 μg/m³). Despite these similar concentrations, no correlations were found between outdoor and indoor PM levels. The present findings are not only of importance for the potential health effects of particulate air pollution on people who spend their daytime over a period of several hours in closed and confined spaces located at a university campus but also can inform regulatory about the improvement of indoor air quality, especially in developing countries.     

Characterization of ambient ozone and its precursors around a coking plant

The local-scale relationship between ambient ozone (O₃) and its precursors was examined around a coking plant in northern China. The upwind, plant boundary, and downwind locations were selected for investigation during the summer and autumn seasons in 2012. It was found that propene, toluene, and benzene were the top three non-methane hydrocarbon (NMHC) species for O₃ formation at plant boundary, while propene, toluene, and m/p-xylene were the top three NMHC species at downwind location. Isoprene was the dominant species for O₃ formation at upwind location. It was also found that an O₃ depressing process occurred at plant boundary as a result of high NO emissions. Both local photochemistry and transport led to O₃ accumulation at the downwind locations. The variation of NMHC concentration during O₃ polluted and non-polluted episodes was investigated, and it indicated that NMHC concentration was higher during non-polluted episodes than polluted episodes. The impacts of precursors on O₃ formation under different meteorological conditions were also examined.