The availability of copper in soils historically amended with sewage sludge, manure, and compost

Metals in soils amended with sewage sludge are typically less available compared with those in soils spiked with soluble metal salts. However, it is unclear if this difference remains in the long term. A survey of copper (Cu) availability was made in soils amended with sewage sludge, manure, and compost, collectively named organic amendments. Paired sets of amended and control soils were collected from 22 field trials where the organic amendments had aged up to 112 yr. Amended soils had higher total Cu concentrations (range, 2-220 mg Cu kg; median, 15 mg Cu kg) and organic C (range, 1-16 g kg; median, 4 g kg) than control soils. All samples were freshly spiked with CuCl, and the toxicity of added Cu to barley was compared between amended and control soils. The toxicity of added Cu was significantly lower in amended soils than in control soil in 15 sets by, on average, a factor of 1.4, suggesting that aged amendments do not largely increase Cu binding sites. The fraction of added Cu that is isotopic exchangeable Cu (labile Cu) was compared between control soils freshly spiked with CuCl and amended soils with both soils at identical total Cu concentrations. Copper derived from amendments was significantly less labile (on average 5.9-fold) than freshly added Cu in 18 sets of soils. This study shows that Cu availability after long-term applications of organic amendments is lower than that of freshly added Cu salts, mainly because of its lower availability in the original matrix and ageing reactions than because of increased metal binding sites in soil.     

Analysis of heavy metals and aromatics compounds in soil layers of a sanitary landfill

Solid waste presents the potential for contamination of the soil when it is improperly managed. One of the great challenges of today's society is to promote the proper disposal of municipal solid waste in order to guarantee the safety of public health and to avoid risks to the environment. In this context, the objective of this study is to analyze the concentration profiles of heavy metals and aromatic hydrocarbons of risk that human health in landfill soil. Such works provides an important tool to evaluate the possible presence of contaminants from inappropriate waste disposal, as well as to assist in the management of waste and to prevent environmental contamination. In order to analyze cadmium (Cd), lead (Pb), nickel (Ni), arsenic (As), and mercury (Hg), which are toxic elements, and aromatic hydrocarbons, including benzene, toluene, ethylbenzene, o‐xylene, m‐xylene, and p‐xylene, soil samples were collected at different sites and depths. Neither Cd nor As was detected in any of the samples that were analyzed. Pb levels ranged from 5.34 milligrams per kilograms (mg/kg) to 7.40 mg/kg, Ni levels ranged from 2.17 mg/kg to 3.00 mg/kg, and Hg levels ranged from 75.4 micrograms per kilograms (μg/kg) to 88.3 μg/kg. The aromatic hydrocarbon compounds of benzene, toluene, ethylbenzene, and o‐xylene were below 5.5 μg/kg, and m‐, p‐xylene was below 11 μg/kg. The analysis of heavy metals and aromatic hydrocarbons present in the landfill soil showed concentrations below the soil quality guideline values of the Brazilian National Environment Council (CONAMA) Resolution 420, which has criteria for the presence of chemical substances in soil for Brazil. Therefore, the low levels of chemicals may be related to the operational time of the landfill or to the population profile of the municipality, which is predominantly composed of persons involved in family‐based agriculture.     

Sorption of the veterinary antimicrobials sulfadimethoxine and ormetoprim in soil

Currently, limited research on the fate of antimicrobials in the environment exists, once they are discharged in human and animal wastes. Sorption of two antimicrobials, sulfadimethoxine (SDM) and ormetoprim (OMP), was investigated in two soils and sand using a series of batch experiments. Because OMP and SDM are often administered in combination, their sorption was also investigated in combination as co-solutes. The rate of SDM and OMP sorption was rapid over the first few hours of the experiments, which then slowed considerably after 16 to 68 h. OMP sorption was enhanced at high concentrations when in combination with SDM, with linear sorption coefficients ranging from 1.3 to 58.3 L.kg(-1) in the single solute experiments and 4.96 to 89.7 L.kg(-1) in the co-solute experiments. Sorption of OMP as a single solute seems to provide a better fit with the Freundlich equation, which became more linear (n approached 1) when SDM was present. Overall, SDM sorbed less than OMP in the two soils and sand. SDM linear sorption coefficients ranged from 0.4 to 25.8 L.kg(-1) as a single solute and 2.5 to 22.1 L.kg(-1) as a co-solute. Sorption of SDM becomes more nonlinear (n < 1) when SDM is present in combination with OMP. Overall, sorption of both antimicrobials increased in the selected soils and sand as the organic matter, clay content, and cation exchange capacity increased. These experiments indicate relatively low sorption of SDM and OMP in natural soils, making them a potential threat to surface and ground water.     

Mechanism for the stabilization/solidification of arsenic-contaminated soils with Portland cement and cement kiln dust

In this study, the mechanism for the stabilization/solidification (S/S) of arsenic (As)-contaminated soils with Portland cement (PC), and cement kiln dust (CKD) using 1 N HCl extraction fluid, X-ray powder diffraction (XRPD), X-ray absorption near edge structure (XANES) and Extended X-ray absorption fine structure (EXAFS) spectroscopy was investigated. The degree of As immobilization after stabilization was assessed using a 1 N HCl extraction on the basis of the Korean Standard Test (KST). After 1 day of curing with 30 wt% PC and 7 days of curing with 50 wt% CKD, the concentration of As leached from the amended soils was less than the Korean countermeasure standard (3 mg L^?1). The As concentrations in the leachate treated with PC and CKD were significantly decreased at pH > 3, indicating that pH had a prevailing influence on As mobility. XRPD results indicated that calcium arsenite (Ca–As–O) and sodium calcium arsenate hydrate (NaCaAsO₄·7.5H₂O) were present in the PC- and CKD-treated slurries as the key phases responsible for As(III) and As(V) immobilization, respectively. The XANES spectroscopy confirmed that the As(III) and As(V) oxidation states of the PC and CKD slurry samples were consistent with the speciated forms in the crystals identified by XRPD. EXAFS spectroscopy showed As–Ca bonding in the As(III)-PC and As(III)-CKD slurries. The main mechanism for the immobilization of As-contaminated soils with PC and CKD was strongly associated with the bonding between As(III) or As(V) and Ca.     

Wet chemical and phosphorus-31 nuclear magnetic resonance analysis of phosphorus speciation in a sandy soil receiving long-term fertilizer or animal manure applications

In areas under intensive livestock farming and with high application rates of animal manure, inorganic and organic phosphorus (P) may be leached from soils. Since the contribution of these P compounds to P leaching may differ, it is important to determine the speciation of P in these soils. We determined the effect of various fertilization regimes on the P speciation in NaOH-Na2EDTA (ethylenediaminetetraacetic acid) and water extracts of acidic sandy soil samples from the top 5 cm of grassland with wet chemical analysis and 31P nuclear magnetic resonance (NMR) spectroscopy. These soils had been treated for a period of 11 years with no fertilizer (control), N (no P application), N-P-K, or different animal manures. Inorganic P was highly elevated in the NaOH-Na2EDTA extracts of the soils amended with N-P-K or animal manures, while organic P increased only in the soil treated with pig slurry. Water-extractable P showed a similar trend. As indicated by 31P NMR, orthophosphate monoesters were the main organic P compounds in all soils. Our results suggest that long-term applications of large amounts of P fertilizer and animal manures caused an accumulation of inorganic P, resulting in an increase of the potential risk related to mobilization of inorganic P in the top 5 cm of these soils.     

Understanding the impact of waste disposal sites on soil quality for agricultural production: A case study of the Kiteezi landfill,Uganda

Leachate from waste disposal sites (WDS) can significantly affect the soil physical, chemical and biological qualities, reducing soil health and agricultural productivity. However, there is a paucity of data on soil quality for understanding soil health impact due to WDS in Uganda. This study's aim was to understand, using the Kiteezi landfill site, how WDS impact soil properties. Soil samples were collected over 4 months in and around the landfill from three locations, and the soil quality data of the nearby area were used as baseline data for assessing the impact on soil due to WDS in the area. There were significant increases in the concentration of all studied parameters at the landfill except total N. The concentrations of ammonium (14.84 ± 1.76 mg/kg), nitrate (127.96 ± 18.36 mg/kg), and pH (7.8) were above the optimum levels. The levels of available P (181.4 ± 28.9 mg/kg) and exchangeable bases; K (2.23 ± 0.24 mg/kg), Na (1.17 ± 0.14 mg/kg), Mg (3.35 ± 0.3 mg/kg) and Ca (14 ± 1.1 mg/kg) cmol (+)/kg were optimal for plant growth. The calculated CEC of 20.75 cmol (+)/kg) showed that soils have a good potential to supply plant nutrients. Heavy metal levels were still below the permissible limit. Hence, the study shows that although WDS may contribute to the increase of soil fertility, they can potentially reduce the overall productivity of soil by increasing nutrient levels beyond optimum levels.     

Annexing Marginal Soils for Agricultural Cultivation Using an Organic Source of Fertilizer as a Bioremediation Treatment Option

This study was carried out to ascertain the practicability of using bioremediated, engine‐oil‐impacted soil for crop cultivation. In this study, bioremediation by land farming and nutrient enhancement was used to treat contaminated soils. In the laboratory, soil samples were homogenized, analyzed, and placed into several reactor vessels including a substrate of poultry droppings and cow dung in various ratios to the contaminated soil. During the first phase of the investigation, contaminated soil without treatment served as a control. The soil matrix was homogenized on a weekly basis, and samples were drawn during the third, fifth, eighth, tenth, and fifteenth weeks for total petroleum hydrocarbon (TPH) reduction and nutrients analysis. The initial concentrations of TPH were diluted upon the addition of the poultry litter and cow dung substrate. Results obtained during the experiment indicate that the amount of nutrients generally decreased as the weeks progressed, and the TPH degradation ranged from 78.27% to 61.84% in the reactor vessels. There was no significant difference (p < .05) in TPH degradation based on the substrate quantities, whereas the TPH reductions in the soil amended with the animal wastes were significantly different from the control sample (soil not amended with animal wastes). In the planting phase, uncontaminated, loamy soil was used as a control (the planting phase control), and the results show that maize planted on the treated soil germinated with no significant difference (p < .05) in the number of leaves and plant heights between the treated samples and the control sample (uncontaminated loamy soil). Analysis of field‐scale animal waste requirements for hypothetical TPH contaminated soil covering a certain area shows that inorganic fertilizer application requires lesser quantities with lower costs than using poultry litter and cow dung to supply nutrients to support bioremediation. The study concludes that bioremediation for agricultural purpose is feasible, but it can be better implemented if the astronomical quantities of substrates required for field‐scale utilization can be surmounted.     

Comparative mobility of sulfonamides and bromide tracer in three soils

In animal agriculture, sulfonamides are one of the routinely used groups of antimicrobials for therapeutic and sub-therapeutic purposes. It is observed that, the animals when administered the antimicrobials, often do not completely metabolize them; and excrete the partially metabolized forms into the environment. Due to the continued use of antimicrobials and disposal of untreated waste, widespread occurrence of partially metabolized antimicrobials in aquatic and terrestrial environments has been reported in various scientific journals. In this research, the mobility of two sulfonamides - sulfamethazine (SMN), sulfathiazole (STZ) and a conservative bromide tracer was investigated in three soils collected from regions in the United States with large number of concentrated animal-feed operations. Results of a series of column studies indicate that the mobility of these two sulfonamides was dependent on pH, soil charge density, and contact time. At low pH and high charge density, substantial retention of sulfonamides was observed in all three soils investigated, due to the increased fraction of cationic and neutral forms of the sulfonamides. Conversely, enhanced mobility was observed at high pH, where the sulfonamides are predominantly in the anionic form. The results indicate that when both SMN and STZ are predominantly in anionic forms, their mobility approximates the mobility of a conservative bromide tracer. This observation is consistent for the mobility of both SMN and STZ individually, and also in the presence of several other antimicrobials in all three soils investigated. Higher contact time indicates lower mobility due to increased interaction with soil material.     

Integrated Use of GLEAMS and GIS to Prevent Groundwater Pollution Caused by Agricultural Disposal of Animal Waste

/ In modern intensive animal farming the disposal of a large amount of waste is of great concern, as, if not properly performed, it can cause the pollution of water, mainly because of the high content of nitrate and phosphate. This paper presents the results of a study intended to assess the environmental sustainability of animal waste disposal on agricultural soils in the alluvial plain of the River Chiana (Tuscany, Italy), a particularly sensitive area because of the high vulnerability of the shallow aquifer and of the intensive agricultural and breeding activities. With this aim, a strategy has been employed, that consists of the integrated use of a management model and GISs. The consequences on groundwater of applying animal waste to different kind of soils and crop arrangements have been simulated by means of the management model GLEAMS (Groundwater Loading Effects of Agricultural Management Systems, ver 2.01). As the huge amount of data required by such a sophisticated model does not allow applications at a scale larger than the field size, IDRISI and GRASS GIS packages have been used to divide the study area into land units, with homogeneous environmental characteristics, and then to generalize on these units the outputs of the model. The main conclusions can be synthesized as follows: The amount of animal waste produced in some of the investigated areas (i.e., municipal territory) is greater than that disposable on their own agricultural soil with no risks to the groundwater; consequently a cooperative approach among municipalities is necessary in order to plan waste disposal in a comprehensive and centralized way.KEY WORDS: Land use; Animal waste disposal; Groundwater protection; GIS, Management models     

Nutrients and Heavy Metals in Legacy Sediments: Concentrations,Comparisons with Upland Soils,and Implications for Water Quality

Concentrations of nutrients and heavy metals in streambank legacy sediments are needed to estimate watershed exports and to evaluate against upland inputs. Concentrations of nutrients and heavy metals were determined for legacy sediments in 15 streambanks across northeastern Maryland, southeastern Pennsylvania, and northern Delaware. Samples were collected from multiple bank depths from forested, agricultural, urban, and suburban sites. Analyses were performed for fine (<63 μm) and coarse sediment fractions. Nutrient and heavy metal concentrations were significantly higher in fine than coarse legacy sediments and water extractable nutrient concentrations were significantly greater for fine sediments. Nutrient and heavy metal concentrations were highest in streambank legacy sediments associated with urban land use, but few differences were found with bank depth. Total N (40–3,970 mg/kg) and P (25–1,293 mg/kg) and bioavailable P (0.25–48.8 mg/kg) concentrations for legacy sediments were lower than those for upland soils. This suggests that legacy sediments could serve as sink or source of N and P depending on the redox conditions and stream water nutrient concentrations. However, despite low concentrations, caution should be exercised since streambank erosion and legacy sediment mass loadings could be high, these sediments are in immediate proximity of aquatic ecosystems, and biogeochemical transformations could result in release of the nutrients.     

Transfer characteristics of cobalt from soil to crops in the suburban areas of Fujian Province,southeast China

The bioavailability of cobalt and its transfer from soil to vegetables and rice were investigated. Among 312 soils collected from vegetable and paddy fields in the suburban areas of some major cities of Fujian Province, southeast China, total soil Co ranged from 3.5 to 21.7 mg kg^?1, indicating a slight accumulation compared with the background value of the province. DTPA extracted 0.1–8.5% of soil total Co. Total and DTPA-extractable Co correlated with soil pH, CEC, free Fe, total Mn, clay and silt content more significantly in paddy soils than in the soils from vegetable fields. The average Co concentrations in the edible parts of vegetables and rice were 15.4 μg kg^?1 and 15.5 μg kg^?1, respectively. The transfer factor (the ratio of plant Co to soil DTPA-extractable Co, TF_DTPA) ranged from 0.003 to 0.126 with a median of 0.049. The TF_DTPA decreased in the order of leafy vegetables > fruit vegetables > root vegetables > rice. The TF_DTPA of all crops decreased with increasing DTPA-extractable Co. Increase in pH, CEC, organic matter, clay, silt, free iron and total Mn limited the soil-to-plant transfer of Co to varying degrees. The transfer of Co from the soils to the edible parts of the crops was lower than that of Zn, Cu and Cd, but higher than that of Pb in the same areas. The concentrations of Co in rice and vegetables in the study areas were considered to be safe for the local residents because of the slight anthropogenic input and the low transfer potential to the edible parts of Co from the soils.     

Bioethanol from waste: Life cycle estimation of the greenhouse gas saving potential

This paper considers two alternative feedstocks for bioethanol production, both derived from household waste—Refuse Derived Fuel (RDF) and Biodegradable Municipal Waste (BMW). Life Cycle Assessment (LCA) has been carried out to estimate the GHG emissions from bioethanol using these two feedstocks. An integrated waste management system has been considered, taking into account recycling of materials and production of bioethanol in a combined gasification/bio-catalytic process. For the functional unit defined as the ‘total amount of waste treated in the integrated waste management system’, the best option is to produce bioethanol from RDF—this saves up to 196 kg CO₂ equiv. per tonne of MSW, compared to the current waste management practice in the UK.However, if the functional unit is defined as ‘MJ of fuel equiv.’ and bioethanol is compared with petrol on an equivalent energy basis, the results show that bioethanol from RDF offers no saving of GHG emissions compared to petrol. For example, for a typical biogenic carbon content in RDF of around 60%, the life cycle GHG emissions from bioethanol are 87 g CO₂ equiv./MJ while for petrol they are 85 g CO₂ equiv./MJ. On the other hand, bioethanol from BMW offers a significant GHG saving potential over petrol. For a biogenic carbon content of 95%, the life cycle GHG emissions from bioethanol are 6.1 g CO₂ equiv./MJ which represents a saving of 92.5% compared to petrol. In comparison, bioethanol from UK wheat saves 28% of GHG while that from Brazilian sugar cane – the best performing bioethanol with respect to GHG emissions – saves 70%. If the biogenic carbon of the BMW feedstock exceeds 97%, the bioethanol system becomes a carbon sequester. For instance, if waste paper with the biogenic carbon content of almost 100% and a calorific value of 18 MJ/kg is converted into bioethanol, a saving of 107% compared to petrol could be achieved. Compared to paper recycling, converting waste paper into bioethanol saves 460 kg CO₂ equiv./t waste paper or eight times more than recycling.     

Land application of carbonatic lake-dredged materials: effects on soil quality and forage productivity

The ability to reuse carbonatic lake-dredged materials (CLDM) for agricultural purposes is important because it reduces offshore disposal and provides an alternative to disposal of the materials in landfills that are already overtaxed. A four-year (2001 to 2005) study on land application of CLDM as an option for disposal was conducted on a beef cattle pasture in south central Florida. The objectives of this study were (i) to assess CLDM as a soil amendment to improve quality of sandy soils in most subtropical beef cattle pastures and (ii) to determine the effect of CLDM on productivity and nutritive values of bahiagrass (BG, Paspalum notatum Flügge) in subtropical beef cattle pasture. The five treatment combinations arranged in randomized complete block design were represented by plots with different ratios (R) of natural soil (NS) to CLDM: R1 (1000 g kg(-1):0 g kg(-1)); R2 (750 g kg(-1):250 g kg(-1)); R3 (500 g kg(-1):500 g kg(-1)); R4 (250 g kg(-1):750 g kg(-1)); and R5 (0 g kg(-1):1000 g kg(-1)). Addition of CLDM had significant (p < or = 0.001) effects on soil quality and favorable influence on forage establishment and nutritive values. Compared with the control plots (0 g kg(-1)), the soils in plots amended with CLDM exhibited (i) lower penetration resistance, (ii) an increase in soil pH and exchangeable cations (Ca and Mg), and (iii) decrease in the levels of soil trace metals (Mn, Cu, Fe, Zn, and Si). Results disclosed consistently and significantly (p < or = 0.001) higher BG biomass production (forage yield = -106.3x(2) + 1015.8x - 39.2; R(2) = 0.99**) and crude protein content (CP = 1.24x + 6.48; R(2) = 0.94**) from plots amended with CLDM than those of BG planted on plots with no CLDM treatment.     

A preliminary study on solid waste generation at Har Ki Pauri,Haridwar, around the Ardh-Kumbh period of sacred bathing in the river Ganga in 2004

The amount of solid waste in the vicinity of the river Ganga increased rapidly during the festive days of Ardh-Kumbh. The initial amount of solid waste was 775.0 kg, observed on 30th January 2004 in the Har Ki Pauri area, which increased to 4,550.0 kg on the main bathing day of 4th May 2004, showing nearly a six-fold increase. The total amount of solid waste collected during nine days of observations was 23,865.0 kg. The rate of solid waste generation fell sharply during the following week, after the main bathing day, and was found to be 1,155.0 kg, which is still about 14.90% higher than the initial value.     

Comparison of energy produced from waste by removing its different components: A case study of the waste landfill in Tehran

In developing and populated cities such as Tehran, a massive amount of municipal solid waste (MSW), both wet and dry, is transferred to landfills daily. Combustion is one of the most common methods of using mixed waste energy from the past to the present. The Dulong formula is widely used to calculate the energy released from MSW combustion. According to the constituent components of Tehran MSW, removing food waste leads to an increase in energy potential, which will be a suitable condition for energy production. In this work, the energy derived from the combustion of mixed and separated dry MSW generated in Tehran was calculated using the experimental Dulong formula and tables in Integrated Solid Waste Management (Tchobanoglous et al. 1993, McGraw‐Hill). The Dulong formula indicates that the use of Tehran mixed MSW (without separating materials for recycling) as a fuel source yields 8,966.40 KJ/kg while the use of Tchobanoglous et al. (1993) tables can generate 8,236 kJ/kg. By removing food waste and recyclable materials, the potential of energy production changes to 22,047 kJ/kg using the Dulong formula and 16,207 kJ/kg and the Tchobanoglous et al. (1993) tables. It indicates increase by 1.46 times and 46%, respectively. Regarding the 200‐ton capacity of the Tehran waste incinerator, the Dulong formula indicated generation of 4,409 MJ/day energy, and the Tchobanoglous et al. table presents 3,241 MJ/day. Therefore, considering that Tehran generates more than 4,000 tons of reject waste daily, it can easily be converted to energy rather than landfilled. This can alleviate the problem of buying land and construction of landfills and leachate generation.     

Constraints on the in situ density of CO2 within the Utsira formation from time-lapse seafloor gravity measurements

At Sleipner, CO₂ is being separated from natural gas and injected into an underground saline aquifer for environmental purposes. Uncertainty in the aquifer temperature leads to uncertainty in the in situ density of CO₂. In this study, gravity measurements were made over the injection site in 2002 and 2005 on top of 30 concrete benchmarks on the seafloor in order to constrain the in situ CO₂ density. The gravity measurements have a repeatability of 4.3 μGal for 2003 and 3.5 μGal for 2005. The resulting time-lapse uncertainty is 5.3 μGal. Unexpected benchmark motions due to local sediment scouring contribute to the uncertainty. Forward gravity models are calculated based on both 3D seismic data and reservoir simulation models. The time-lapse gravity observations best fit a high temperature forward model based on the time-lapse 3D seismics, suggesting that the average in situ CO₂ density is about to 530 kg/m³. Uncertainty in determining the average density is estimated to be ±65 kg/m³ (95% confidence), however, this does not include uncertainties in the modeling. Additional seismic surveys and future gravity measurements will put better constraints on the CO₂ density and continue to map out the CO₂ flow.     

Environmental inventory modelling of the use of compost and peat in growth media preparation

Compost produced from biological treatment of organic waste has a potential for substituting peat in growth media preparation. The life-cycle-inventories (LCIs) of the two alternatives were compared using LCA-modelling (EASEWASTE) considering a 100-year period and a volumetric substitution ratio of 1:1. For the compost alternative, the composting process, growth media use, and offsetting of mineral fertilizers were considered. For the peat alternative, peatland preparation, excavation, transportation, and growth media use were considered. It was assumed that for compost 14% of the initial carbon was left in the soil after 100 years, while all carbon in peat was mineralized. With respect to greenhouse gas emissions, the former is considered a saving, while the later is considered an emission, because peat in a peatland is considered stored biogenic carbon. The leaching during the growth media use was assessed by means of batch leaching tests involving 4 compost samples and 7 peat samples. The compost leached 3–20 times more heavy metals and other compounds than the peat. The life-cycle-assessment showed that compost performs better regarding global warming (savings in the range of 70–150 kg CO₂-eq. Mg⁻¹) and nutrient enrichment (savings in the range of 1.7–6.8 kg NO₃ Mg⁻¹ compost), while peat performs better in some toxic categories, because of the lower content of heavy metals.     

Nitrous oxide emissions respond differently to mineral and organic nitrogen sources in contrasting soil types

The use of various animal manures for nitrogen (N) fertilization is often viewed as a viable replacement for mineral N fertilizers. However, the impacts of amendment type on NO production may vary. In this study, NO emissions were measured for 2 yr on two soil types with contrasting texture and carbon (C) content under a cool, humid climate. Treatments consisted of a no-N control, calcium ammonium nitrate, poultry manure, liquid cattle manure, or liquid swine manure. The N sources were surface applied and immediately incorporated at 90 kg N ha before seeding of spring wheat ( L.). Cumulative NO-N emissions from the silty clay ranged from 2.2 to 8.3 kg ha yr and were slightly lower in the control than in the fertilized plots ( = 0.067). The 2-yr mean NO emission factors ranged from 2.0 to 4.4% of added N, with no difference among N sources. Emissions of NO from the sandy loam soil ranged from 0.3 to 2.2 kg NO-N ha yr, with higher emissions with organic than mineral N sources ( = 0.015) and the greatest emissions with poultry manure ( < 0.001). The NO emission factor from plots amended with poultry manure was 1.8%, more than double that of the other treatments (0.3-0.9%), likely because of its high C content. On the silty clay, the yield-based NO emissions (g NO-N kg grain yield N) were similar between treatments, whereas on the sandy loam, they were greatest when amended with poultry manure. Our findings suggest that, compared with mineral N sources, manure application only increases soil NO flux in soils with low C content.     

Assessment of properties of Tunisian agricultural waste composts: Application as components in reconstituted anthropic soils and their effects on tomato yield and quality

Organic soil improvers are mainly used for their potential for preventing soil losses. This study investigates the physicochemical properties of six different organic soil improvers and their effects on the properties and productivity of reconstituted anthropic soils during short-term application compared to farm manure. Treatment materials were obtained from Tunisian agricultural waste composts (almond shell (AS), sesame bark (SB), olive cake (OC), olive mill wastewater sludge (OMWS) and poultry manure (PM)) as well as mixtures of compost-manure (CM). The characterization of soil conditioners shows that (i) nitrogen contents are higher in olive wastes and PM-based composts; (ii) carbon/nitrogen ratio (C/N) and the organic matter (OM) contents are in the ranges of 14.1-29.7 and 19.3-64.5%, respectively; (iii) the electrical conductivity (EC) is higher in manure (M) and compost-manure mixture (4.8-10.4 mS/cm) and (iv) pH values are alkaline (8.2-8.8). Treatments were applied as components of a reconstituted soil at a rate of 14 kg/m². Except for the manures, the mixtures of soil and treatment material (in a ratio of 600 L/28 kg) were placed in metallic basins to form the reconstituted anthropic soil. Plot areas of 2 m² were used for each treatment and 2 × 2 m² for the control. An assessment of the geochemical properties of soils during the cultivation period reveals variations in soil organic matter (SOM) contents as well as pH and EC values. Soil productivity is determined by quantitative and qualitative comparison of tomato fruits obtained from each plot amended with manure-treated soil.     

Amelioration of physical strength in waste foundry green sands for reuse as a soil amendment

To avoid increasing costs of landfill disposal, it has become increasingly important for U.S. foundries to identify beneficial reuses for the 8 to 12 million tons of waste foundry sand (WFS) generated annually. A major drawback to the reuse of some WFSs as a soil amendment is their high soil strength, under dry conditions, where root growth may be limited. Fifteen WFSs were analyzed for strength to rupture using lab-formed clods, exchangeable cations (Na, Mg, Ca), metal oxide concentration (Fe, Mn, Al, Si), cation exchange capacity (CEC), and % clay. Several WFS samples from gray iron foundries demonstrated high strength to rupture values (> 1.5 MPa), and could potentially restrict root growth in amended soils. The percentage of Na-bentonite exhibited a positive correlation (R(2) = 0.84) with strength to rupture values. When WFSs containing more Na-bentonite were saturated with 1 mol L(-1) Ca ions, strength values decreased by approximately 70%. Waste foundry sands containing less Na-bentonite were saturated with 1 mol L(-1) Na ions and exhibited a threefold increase in strength. Additions of gypsum (up to 9.6 g kg(-1) sand) to high strength waste foundry sands also caused decreases in strength. These results indicate that high strength WFSs have properties similar to hardsetting soils which are caused by high Na(+) clay content and can be ameliorated by the addition of Ca(2+).