Airborne endotoxin in woodworking (joinery) shops

Symptoms such as shortness of breath and cough have been noted in woodworking facilities even where wood dust itself is well-controlled. Suspicion has fallen on other possible contaminants in the workplace atmosphere, including bacterial endotoxin. A few studies have indicated potentially high endotoxin exposure with exposure to fresh wood in sawmills and in the production of fiberboard and chipboard, but fewer studies have been carried out on exposure to endotoxin in dry wood work, for example in joineries. A study of the endotoxin content of airborne wood dust samples from US woodworking facilities is presented, from the re-analysis of samples which previously had been taken to establish mass collection relationships between the IOM sampler, the closed-face 37 mm plastic cassette (CFC) sampler and the Button sampler. Endotoxin was strongly correlated with total dust, but the endotoxin content of a few fresh wood samples was found to be up to ten times higher per unit of wood dust than for dried-wood samples, and this difference was significant. No long-term time-weighted average sample exceeded the recommended limit value of 50 EU m(-3) (EU, endotoxin units)used in the Netherlands, although a number of the IOM samples came close (seven samples or 44% exceeded 20 EU m(-3)) and one short-term (48 minute) sample registered a high value of 73 EU m(-3). The geometric mean concentration from the IOM samples (11 EU m(-3)) is within the range of geometric means found from Australian joineries (3.7-60, combined: 24 EU m(-3)). In contrast, the corresponding values from the CFC (3.6 EU m(-3)), and the Button sampler (2.1 EU m(-3)) were much lower and no samples exceeded 20 EU m(-3). Endotoxin is likely only to be a significant problem in working with dried woods when associated with very high dust levels, where the wood dust itself is likely to be a cause for concern. The results from the few samples in this study where fresh wood was being worked were similar to results from other studies involving fresh woods. The agreement between these studies is encouraging given the difficulties of endotoxin analysis and the wide variation often expected between different laboratories.     

Gravimetric and Chemical Features of Airborne PM10 AND PM2.5 in Mainland Portugal

This paper describes concentration amounts of arsenic (As), particulate mercury (Hg), nickel (Ni) and lead (Pb) in PM₁₀ and PM_2.5, collected since 1993 by the Technological and Nuclear Institute (ITN) at different locations in mainland Portugal, featuring urban, industrial and rural environments, and a control as well. Most results were obtained in the vicinity of coal- and oil-fired power plants. Airborne mass concentrations were determined by gravimetry. As and Hg concentrations were obtained through instrumental neutron activation analysis (INAA), and Ni and Pb concentrations through proton-induced X-ray emission (PIXE). Comparison with the EU (European Union) and the US EPA (United States Environmental Protection Agency) directives for Ambient Air has been carried out, even though the sampling protocols herein – set within the framework of ITN's R&D projects and/or monitoring contracts – were not consistent with the former regulations. Taking this into account, 1) the EU daily limit for PM₁₀ was exceeded a few times in all sites except the control, even if the number of times was still inferior to the allowed one; 2) the EU annual mean for PM₁₀ was exceeded at one site; 3) the EPA daily limit for PM_2.5 was exceeded one time at three sites; 4) the EPA annual mean for PM_2.5 was exceeded at most sites; 5) the inner-Lisboa site approached or exceeded the legislated PMs; 6) Pb levels stayed far below the EU limit value; and 7) concentrations of As, Ni and Hg were also far less than the reference values adopted by EU. In every location, Ni appeared more concentrated in PM_2.5 than in coarser particles, and its levels were not that different from site to site, excluding the control. The highest As and Hg concentrations were found in the neighbourhood of the coal-fired, utility power plants. The results may be viewed as a “worst-case scenario” of atmospheric pollution, since they have been obtained in busy urban-industrial areas and/or near major power-generation and waste-incineration facilities.     

Monitoring of nitrates in drinking water from agricultural and residential areas of Podravina and Prigorje (Croatia)

Nitrates are the most common chemical pollutant of groundwater in agricultural and suburban areas. Croatia must comply with the Nitrate Directive (91/676/EEC) whose aim is to reduce water pollution by nitrates originating from agriculture and to prevent further pollution. Podravina and Prigorje are the areas with a relatively high degree of agricultural activity. Therefore, the aim of this study was, by monitoring nitrates, to determine the distribution of nitrates in two different areas, Podravina and Prigorje (Croatia), to determine sources of contamination as well as annual and seasonal trends. The nitrate concentrations were measured in 30 wells (N?=?382 samples) in Prigorje and in 19 wells (N?=?174 samples) in Podravina from 2002 to 2007. In Podravina, the nitrate content was 24.9 mg/l and 6 % of the samples were above the maximum available value (MAV), and in Prigorje the content was 53.9 mg/l and 38 % of the samples above MAV. The wells were classified as correct, occasionally incorrect and incorrect. In the group of occasionally incorrect and incorrect wells, the point sources were within 10 m of the well. There is no statistically significant difference over the years or seasons within the year, but the interaction between locations and years was significant. Nitrate concentrations’ trend was not significant during the monitoring. These results are a prerequisite for the adjustment of Croatian standards to those of the EU and will contribute to the implementation of the Nitrate Directive and the Directives on Environmental Protection in Croatia and the EU.     

Monitoring of growth and yield and response to silvicultural treatments

The objectives for monitoring the growth and yield of forests can range from collecting data to validate current management on an ownership to collecting data at a regional level to develop models, measure treatment response, or observe long-term growth trends. Traditional inventory and research data each have drawbacks for observing growth and yield and treatment response. The actual design of a monitoring system should try to minimize these problems, but will depend on the specific objectives. Monitoring of operations may take an inventory-type approach, while gathering regional information to build models requires a design more like research. Each organization must be responsible for monitoring its own operations, however, cooperatives offer a viable and cost effective alternative to gathering regional growth and response data. Monitoring programs will lead to confidence and credibility in management practices and in the use of tested models.     

PET bottle use patterns and antimony migration into bottled water and soft drinks: the case of British and Nigerian bottles

While antimony has been reported to migrate from PET bottles into contents, reports on bottled water and soft drinks usage and PET bottle reuse patterns are currently unavailable in the literature. Bottle use conditions and patterns are important determinants of antimony migration. In this work a survey assessing the pattern of bottle use and reuse in Britain and Nigeria was undertaken. The survey findings influenced the design of laboratory experiments that assessed the migration of antimony from PET bottles into water and soft drinks. Typical storage durations for bottled contents between purchase and opening for use were 7 days or less. However storage of up to one year was reported. Bottle reuse was high and similar for the two countries with reuse durations being higher in Nigeria. The antimony concentration in 32 PET bottle materials from Britain and Nigeria were similar and ranged between 177 and 310 mg kg(-1). For 47 freshly purchased British bottled contents antimony concentration ranged between 0.03 and 6.61 μg L(-1) with only one sample exceeding the EU acceptable limit. Concentrations of Cd, Ge, Zn, Al, Be, Ti, Co and Pb were also measured. At realistic temperatures of 40 and 60 °C antimony concentration in deionised water in bottles remained below the EU acceptable limit even after 48 h exposure. The limit was exceeded for most exposures at 80 °C. Concentration of antimony in some bottled contents exceeded the EU limit after 11 months of storage at room temperature. Bottle aging and increase in bottle volume were associated with decreased migration of antimony from bottles.     

Prioritizing GM crop monitoring sites in the dynamics of cultivation systems and their environment

EU legislation stipulates that GM crops have to be monitored for potential adverse environmental effects. Monitoring preferably should take place in the most exposed areas-the cultivated fields and their neighbouring environment. Current monitoring designs do not give detailed consideration to the different exposure intensities in agricultural practice. At the same time, the selection of specific, more exposed sites is difficult considering the dynamic and diversity of crop cultivation and rotation systems and their environments. We developed an approach for prioritising the monitoring of on-farm and neighbouring sites based on differing exposure levels using a minimum dataset of cultivation and land use information. Applying a Bt-maize cultivation scenario to Brandenburg, Germany, where presently no GM crops are cultivated, we systemised and categorised areas with different spatio-temporal exposure intensities including 50 m, 200 m and 1000 m buffers. These categories correspond to different suitabilities to serve as monitoring sites. Sites are prioritised using a sequential scheme. This yields an improved and objective spatial monitoring design providing detailed exposure information. This methodology is flexible and transferable to any agricultural setting, therefore enabling superior statistical comparisons between locations and regions and thus enhancing monitoring data quality.     

Canada's National Forest Inventory (Responding to Current Information Needs)

Canada's current National Forest Inventory is a periodic compilation of existing inventory material from across the country. While the current approach has many advantages, it lacks information on the nature and rate of changes to the resource, and does not permit projections or forecasts. Beinga compilation of inventories of different dates, the current national forest inventory cannot reflect the current state ofthe forests and therefore cannot be used as a satisfactory baseline for monitoring change. The current format of Canada's National Forest Inventory has served its purpose by providingnational statistical compilations and reporting. However, itsuseful life is coming to a conclusion. To meet new demands, Canada is considering a new National Forest Inventory design consisting of a plot-based system of permanent observational units located on a national grid. The objective of the new inventory design is to assess and monitor the extent, state andsustainability of Canada's forests in a timely and accurate manner. Details of the new inventory design are described. A strategy to respond to Canada's national and international forest reporting commitments through a National Forest Information System is also discussed.     

Sulfuric acid at workplaces--applicability of the new Indicative Occupational Exposure Limit Value (IOELV) to thoracic particles

Until 2009, the limit values for airborne sulfuric acid in Europe were based on the inhalable particle fraction (e.g. MAK (Maximum allowed concentration at workplace) value 0.1 mg m(-3) as the inhalable fraction). With the publication of the Commission Directive 2009/161/EU, an Indicative Occupational Exposure Limit Value (IOELV) of 0.05 mg m(-3) for sulfuric acid aerosols was based for the first time on the thoracic particle fraction. To permit a comparison of the measured values for the inhalable fraction with those of the thoracic fraction and to quantify the thoracic fraction, a cyclone was fabricated out of sulfuric-acid-resistant stainless steel that achieves suitable collection characteristics (PM(10)) at a flow rate of 5.34 L min(-1). 49 measurements were carried out in parallel in 21 companies. At concentrations well below the IOELV, there is little difference between the thoracic and inhalable particle concentrations. At higher concentrations (>0.1 mg m(-3) inhalable aerosol), larger droplets have a marked effect on the measured values and the thoracic fraction accounts for only 32.1 ± 12.5% of the inhalable fraction. The EU's IOELV and the proposal of the MAK Commission therefore provide a comparable level of protection. In the transposition of the IOELV into national law, an air limit of 0.1 mg m(-3) could therefore be implemented for the inhalable fraction.     

Is PM10 mass measurement a reliable index for air quality assessment? An environmental study in a geographical area of north-eastern Italy

The aim of this study was to measure the concentration of some metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Ti) in PM(10) samples collected in one urban and one industrial site and to assess that PM(10) total mass measurement may be not sufficient as air quality index due to its complex composition. Metals were determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and differential pulsed anodic stripping voltammetry (DPASV). The measured concentrations were used to calculate the content of metals in the PM(10) total mass, and to estimate the enrichment factors and the correlations between PM(10), metal concentrations and meteorological data for the two sites. The mean PM10 concentration during the sampling period in the urban site exceeded the annual European Union (EU) standard (40 microg/m(3)) and, for some sampling days, the daily EU standard (50 microg/m(3)) was also exceeded. In opposite, both EU standards were never exceeded in the industrial site. The overall metal content was nearly double in the industrial site compared to the urban one, and the mean Ni concentration exceeded the EU annual limit value (10 ng/m(3)). The metals with the highest enrichment factor were Cd, Cu, Ni and Pb for both sites, suggesting a dominant anthropogenic source for these metals. Metal concentrations were very low and typical of rural background during Christmas holidays, when factories were closed. PM(10) total mass measurement is not a sufficient air quality index since the metal content of PM(10) is not related to its total mass, especially in sites with industrial activities. This measurement should be associated with the analysis of toxic metals.     

Developing a National Indicator of Soil Quality on U.S Forestlands: Methods and Initial Results

The Montreal Process was formed in 1994 to develop an internationally agreed upon set of criteria and indicators for the conservation and sustainable management of temperate and boreal forests. In response to this initiative, the Forest Inventory and Analysis (FIA) and Forest Health Monitoring (FHM) programs of the United States Department of Agriculture Forest Service have implemented soil measurements as part of a national monitoring program to address specific questions related to the conservation of soil and water resources. Integration of soil assessments into the national FIA program provides for systematic monitoring of soil properties across all forested regions of the U.S. using standardized collection, laboratory, and statistical procedures that are compatible with existing forest inventory data. The resulting information will provide quantitative benchmarks for regional, national, and international reporting on sustainable forest management and enhance our understanding of management effects on soil quality. This paper presents an overview of the FIA soil monitoring program, outlines the field and laboratory protocols as currently implemented, and provides examples of how these data may be used to assess indicators of sustainable management as defined by the Montreal Process.     

1,4-Dichlorobenzene Marine Risk Assessment with Special Reference to the Osparcom Region: North Sea

This risk assessment on 1,4-dichlorobenzene was carried out for the marine environment, following methodology given in the EU risk assessment Regulation (1488/94) and Guidance Document of the EU New and Existing Substances Regulation (TGD, 1996). Data from analytical monitoring programs in large rivers and estuaries in the North Sea area were collected and evaluated on effects and environmental concentrations. Risk is indicated by the ratio of predicted environmental concentration (PEC) to predicted no-effect concentration (PNEC) for the marine aquatic environment. In total, 17 data for fish, 9 data for invertebrates and 7 data for algae were evaluated. Acute and chronic toxicity studies were taken into account and appropriate assessment factors used to define a final PNEC value of 20 microg/l. Recent monitoring data indicate that 1,4-dichlorobenzene levels in coastal waters and estuaries are below the determination limit of 0.1 microg/l used in monitoring programs. The worst case value recorded in river water is below 0.45 microg/l. Using these values, calculated PEC/PNEC ratios give safety margins of about 40-200, taking no account of dilution in the sea. Environmental fate and bioaccumulation data indicate that current use of 1,4-dichlorobenzene poses no risk to the aquatic environment.     

Nitrate Leaching by Atmospheric N Deposition to Upper Groundwater in the Sandy Regions of The Netherlands in 1990

Anthropogenic increase in atmospheric nitrogen (N) deposition in nature areas results in nitrate leaching to groundwater, threatening its quality. Member states of the European Union are obliged to reduce groundwater nitrate concentrations and to monitor this reduction. The relationship between N deposition and groundwater nitrate concentrations is quantified using a field survey and geographical information. Nitrate concentrations of the uppermost metre of groundwater in nature areas in the sandy regions in 1990 were related to geographical data by means of regression analysis. In this way nitrate concentrations could be explained by potential ammonia deposition, soil type, vegetation and land use. We found that about 35% of 54 kg ha(-1) a(-1) atmospheric N deposition was leached to the upper groundwater as nitrate, resulting in a mean NO3 concentration of about 30 mg L(-1). The critical N load for exceeding the EC limit value (50 mg L(-1)) in the sandy regions of The Netherlands composed of natural vegetation will be about 80 kg ha(-1) a(-1). Leaching is less than expected for nature areas but comparable with leaching of N surpluses in pastures in The Netherlands. A reduction in nitrate leaching by 25% or more can currently be detected via a new field survey.     

Nitrate leaching in agriculture to upper groundwater in the sandy regions of the Netherlands during the 1992–1995 period

The Dutch National Monitoring Programme for Effectiveness of the Minerals Policy (LMM) was initiated to allow detection of a statutory reduction in nitrate leaching caused by a decreasing N load. The starting point, or baseline, was taken as the nitrate concentration of the upper metre of groundwater sampled on 99 farms in the 1992–1995 period in the sandy areas of the Netherlands, where predominantly grass and maize grow. We found here that a reduction in nitrate leaching of more than 20% in future would almost certainly be detected with the LMM. Detecting downward trends due to decreasing N load will require nitrate concentrations to also be related to soil drainage, precipitation excess leading to groundwater recharge and to location. Furthermore, we found that about 16% of the N load in the Dutch sandy regions was being leached to the upper metre of groundwater in the 1992–1995 period. The critical N load in approximately 1990 for exceeding the EC limit value for nitrate, NO₃, (50 mg L^–1) in the upper metre of groundwater for the mean situation for grassland, maize and arable land in the sandy area was found to be 210 kg ha^–1 a^–1. Because manure management has been altered, the critical load found will be lower than the current critical load .     

The inadequacy of monitoring without modelling support

There is much to gain in joining monitoring and modelling efforts, especially in the present process of implementing the European Water Framework Directive and in the coming implementation of the Groundwater Directive. Nevertheless, present practises in the water management world suggest that most often models are not considered an option when monitoring obligations in the WFD are solved. The present paper analyses the constraints, such as perceived insufficiency of data for modelling, lack of explicit requirement for modelling in the WFD and its associated technical guidance documents, lack of awareness about what models can do and lack of confidence in models by water managers and policy makers. The findings have mainly emerged from a series of Harmoni-CA workshops aiming at bringing the monitoring and modelling communities together for a discussion of benefits and constraints in the joint use of monitoring and modelling. The workshops were attended by scientists, water managers, policy makers, stakeholders and consultants. The overall conclusion is that modelling can significantly improve the benefits of monitoring data; by quality assurance of data, interpolation and extrapolation in space and time, development of process understanding (conceptual models), and the assessment of impacts of pressures and effects of programmes of measures.     

Statistically Extracted Fundamental Watershed Variables for Estimating the Loads of Total Nitrogen in Small Streams

Accurate estimation of total nitrogen loads is essential for evaluating conditions in the aquatic environment. Extrapolation of estimates beyond measured streams will greatly expand our understanding of total nitrogen loading to streams. Recursive partitioning and random forest regression were used to assess 85 geospatial, environmental, and watershed variables across 636 small (<585 km²) watersheds to determine which variables are fundamentally important to the estimation of annual loads of total nitrogen. Initial analysis led to the splitting of watersheds into three groups based on predominant land use (agricultural, developed, and undeveloped). Nitrogen application, agricultural and developed land area, and impervious or developed land in the 100-m stream buffer were commonly extracted variables by both recursive partitioning and random forest regression. A series of multiple linear regression equations utilizing the extracted variables were created and applied to the watersheds. As few as three variables explained as much as 76 % of the variability in total nitrogen loads for watersheds with predominantly agricultural land use. Catchment-scale national maps were generated to visualize the total nitrogen loads and yields across the USA. The estimates provided by these models can inform water managers and help identify areas where more in-depth monitoring may be beneficial.     

Documentation of the endotoxins present in the ambient air of cotton fiber textile mills in Québec

Cotton workers are recognized as being at risk of developing occupational lung diseases. Some researchers have identified endotoxins as being a potential etiologic agent for some of the respiratory problems. This study wants to document the concentration of endotoxins found in the ambient air of textile mills where cotton fibers are handled and to identify the processing steps where the highest endotoxins concentrations in the air were found and the one where the relative limit values (RLVs) are exceeded. The 4 mills studied process cotton fibers. All the air samples were analyzed using the chromogenic Limulus Amoebocytes lysate LAL method using a kinetic detection principle based on the IRSST's standard method. In this study, a large variability in the concentrations of endotoxins in the air was observed, depending on the mill, the processing step, and the time. Despite these variations, some processes can be identified as being major generators of endotoxins in the ambient air of the mills. The highest concentrations were measured in the weaving and drawing processes and reached 10,000 EU m(-3) of air. The opening, cleaning, carding, spinning and drawing processes are the other major endotoxins generating processes with concentrations from 24 to 8,700 EU m(-3) of air. The endotoxins concentrations exceeded the RLVs for 55% of the workstations in this project. This study demonstrated that endotoxins levels in the cotton industry are high and appropriate control measures are needed.     

Comparison of Nitrate Levels in Raw Water and Finished Water from Historical Monitoring Data on Iowa Municipal Drinking Water Supplies

Nitrate contamination of water sources is a concern where large amounts of nitrogen fertilizers are regularly applied to soils. Ingested nitrate from dietary sources and drinking water can be converted to nitrite and ultimately to N-nitroso compounds, many of which are known carcinogens. Epidemiologic studies of drinking water nitrate and cancer report mixed findings; a criticism is the use of nitrate concentrations from retrospective drinking water data to assign exposure levels. Residential point-of-use nitrate data are scarce; gaps in historical data for municipal supply finished water hamper exposure classification efforts. We used generalized linear regression models to estimate and compare historical raw water and finished water nitrate levels (1960s--1990s) in single source Iowa municipal supplies to determine whether raw water monitoring data could supplement finished water data to improve exposure assessment. Comparison of raw water and finished water samples (same sampling date) showed a significant difference in nitrate levels in municipalities using rivers; municipalities using other surface water or alluvial groundwater had no difference in nitrate levels. A regional aggregation of alluvial groundwater municipalities was constructed based on results from a previous study showing regional differences in nitrate contamination of private wells; results from this analysis were mixed, dependent upon region and decade. These analyses demonstrate using historical raw water nitrate monitoring data to supplement finished water data for exposure assessment is appropriate for individual Iowa municipal supplies using alluvial groundwater, lakes or reservoirs. Using alluvial raw water data on a regional basis is dependent on region and decade.     

Presence of pesticide residues on produce cultivated in Suriname

Agricultural pesticides are widely used in Suriname, an upper middle-income Caribbean country located in South America. Suriname imported 1.8 million kg of agricultural pesticides in 2015. So far, however, national monitoring of pesticides in crops is absent. Reports from the Netherlands on imported Surinamese produce from 2010 to 2015 consistently showed that samples exceeded plant-specific pesticide maximum residue limits (MRLs) of the European Union (EU). Consumption of produce containing unsafe levels of pesticide residues can cause neurological disorders, and particularly, pregnant women and children may be vulnerable. This pilot study assessed the presence of pesticide residues in commonly consumed produce items cultivated in Suriname. Thirty-two insecticides (organophosphates, organochlorines, carbamates, and pyrethroids) and 12 fungicides were evaluated for their levels in nine types of produce. Pesticide residue levels exceeding MRLs in this study regarded cypermethrin (0.32 μg/g) in tomatoes (USA MRL 0.20 μg/g), lambda-cyhalothrin (1.08 μg/g) in Chinese cabbage (USA MRL 0.40 μg/g), endosulfan (0.07 μg/g) in tannia (EU MRL 0.05 μg/g), and lindane (0.02 and 0.03 μg/g, respectively) in tannia (EU MRL 0.01 μg/g). While only a few pesticide residues were detected in this small pilot study, these residues included two widely banned pesticides (endosulfan and lindane). There is a need to address environmental policy gaps. A more comprehensive sampling and analysis of produce from Suriname is warranted to better understand the scope of the problem. Preliminary assessments, using intake rate, hazard quotient, and level of concern showed that it is unlikely that daily consumption of tannia leads to adverse health effects.     

农业面源污染防治的监测问题分析

近年来,农业面源污染已成为许多国家和地区水环境质量改善的主要影响因素,开展农业面源污染监测将为深入打好污染防治攻坚战提供重要支撑。该文系统分析当前我国农业面源污染监测存在的主要问题,综合考虑国内外经验,提出如下建议:采取空间嵌套式的布局模式优化地表水环境监测点位,充分发挥环境监测的预测预报和风险评估功能;建立包括污染源、产排污系数和空间传输过程的农业面源污染全过程监测网络;定期开展土壤氮、磷养分含量评估和地下水硝酸盐氮测定和评估;建立完善数据整合与共享机制。