Heavy Metals Content in N. OleanderLeaves As Urban Pollution Assessment

Nerium oleanderL. (Oleander) leaves grown in Palermo city (Sicily, Italy) were collected from six sampling sites representing either areas of high traff{i}c and urbanisation density or areas far away from traffic (e.g. city gardens). Concentration of Al, Ba, Cr, Cu, Fe, Pb, Mg, Mn, and Zn were determined in leaf samples during two years. Multivariate analysis classified the sampling sites in four groups based on the metal content in vegetal leaves in agreement with traffic and human activity site. Many elements studied (Al, Ba, Fe, Mn Mg) arise from the soil composition and others such as Cr, Cu, Pb and Zn as pollutant of the soil. On the other hand, about 30% of Al, Fe Cr, Cu and Pb originate from aerial deposition on leaves. Although the results presented should be handled with caution N. oleandercan be considered as a means of assessing dust contamination in the urban environment.     

PM source apportionment and trace metallic aerosol affinities during atmospheric pollution episodes: a case study from Puertollano, Spain

Source apportionment study was performed, applying principal component analysis to the results of 221 chemical analyses of PM10 and PM2.5 samples collected daily from the industrial (but low traffic) Spanish town of Puertollano over a 14-month period during 2004-2005. Results reveal compositional variations attributable to different mixtures of natural and anthropogenic materials, mainly soil and rock dust (crustal), marine salt (only in PM10), petrochemical refinery emissions, and particles attributed to the combustion of local coal, which is unusually rich in Pb and Sb. During the study period there were 34 pollution episodes when PM10 exceeded 50 tg m(-3), mostly due to winter air temperature inversions, regional atmospheric stagnation, or African dust incursions (North African, NAF days: usually in summer). Whereas the crustal component during NAF episodes averaged 52% with a PM2.5/PM10 ratio of 0.54, this dropped to 29% and a PM2.5/PM10 of 0.67 during non-NAF days when anthropogenic materials predominated. Abnormally enhanced concentrations of pathfinder metallic trace elements provide additional evidence for source apportionment: thus aerosols with raised levels of Pb and Sb are associated with local coal combustion, Ni and V can be linked to petrochemical PM emissions, and Ti, Mn, Rb, and Ce are particularly characteristic of crustal dust incursions.     

Dynamics and origin of PM2.5 during a three-year sampling period in Beijing, China

Systematic sampling and analysis were performed to investigate the dynamics and the origin of suspended particulate matter smaller than 2.5 μm in diameter (PM(2.5)), in Beijing, China from 2005 to 2008. Identifying the source of PM(2.5) was the main goal of this project, which was funded by the German Research Foundation (DFG). The concentrations of 19 elements, black carbon (BC) and the total mass in 158 weekly PM(2.5) samples were measured. The statistical evaluation of the data from factor analysis (FA) identifies four main sources responsible for PM(2.5) in Beijing: (1) a combination of long-range transport geogenic soil particles, geogenic-like particles from construction sites and the anthropogenic emissions from steel factories; (2) road traffic, industry emissions and domestic heating; (3) local re-suspended soil particles; (4) re-suspended particles from refuse disposal/landfills and uncontrolled dumped waste. Special attention has been paid to seven high concentration "episodes", which were further analyzed by FA, enrichment factor analysis (EF), elemental signatures and backward-trajectory analysis. These results suggest that long-range transport soil particles contribute much to the high concentration of PM(2.5) during dust days. This is supported by mineral analysis which showed a clear imprint of component in PM(2.5). Furthermore, the ratios of Mg/Al have been proved to be a good signature to trace back different source areas. The Pb/Ti ratio allows the distinction between periods of predominant anthropogenic and geogenic sources during high concentration episodes. Backward-trajectory analysis clearly shows the origins of these episodes, which partly corroborate the FA and EF results. This study is only a small contribution to the understanding of the meteorological and source driven dynamics of PM(2.5) concentrations.     

Trace Element Patterns and Seasonal Variability of Dust Precipitation in a Low Polluted City – The Example of Karlsruhe/Germany

Urban areas of different land uses can be distinguished by their specific patterns of atmospheric dust and trace element precipitation. Dusts emitted from industrial areas with fossil fuel processing, for instance, are enriched in V, Ni and Co. Cluster analysis groups sampling sites based on their specific element patterns. The resulting groups correspond to the surrounding land use: Urban sampling sites were identified showing similar patterns of dust and trace element precipitation as a reference site; dusts of other urban sites were influenced by diffuse pollution (caused by non-point and dispersed pollution sources), or by specific industrial emissions. Cluster analysis was also used to characterize the chemical dust composition. Three clusters of typical element associations were distinguished. These clusters represent the dust matrix, diffuse urban pollution and pollution due to fossil fuel processing. Dust precipitation and chemical dust composition show seasonal variations. Dust precipitation and concentrations of trace elements in the precipitated dust are negatively correlated during the annual courses. The highest concentrations of trace elements occur during winter, whereas the highest precipitations of dust were found during summer. This finding stresses that both, precipitation and concentration have to be addressed for the environmental assessment of urban dusts.     

Soil Contribution to the Elemental Composition of Epiphytic Lichens (Tuscany, Central Italy)

Total concentrations of Al, Ba, Cd, Co, Cr, Cu, Fe, Mn, Mo, Pb, Sr, Ti, V and Zn in the epiphytic lichen Parmelia sulcata and superficial soils from 60 remote sampling sites in Tuscany (central Italy) were determined to evaluate the contribution of soil to the elemental composition of the lichen. The results showed that in the Mediterranean environment, the trace element content of unwashed lichen samples is greatly affected by soil contamination. However, despite the strong correlations between the concentrations of lithogene elements such as Al, Fe and Ti in P. sulcata, lichen levels of these elements were not at all linearly correlated with their concentrations in the soil, suggesting that dust contamination is highly variable and probably dependent on local site characteristics. All methods evaluated to minimize soil contamination indicated Cu, Pb and Zn as elements of atmospheric origin. However, while levels of Pb were similar to those reported for background areas, moderate pollution by Cu and Zn, probably from fertilizers used in agriculture, was revealed. For elements such as Cd and Mo, identified as atmophile, some uncertainty exists due to the fact that they are essential for lichen metabolism and accumulate intracellularly in lichens; they may therefore occur in soluble form in the lichen thallus.     

Indoor and outdoor concentrations of PM2.5 trace elements at homes, preschools and schools in Stockholm, Sweden

Fine particles (PM2.5) were sampled indoors and outdoors at 40 sampling sites; in ten classrooms in five schools, at ten preschools and 20 non-smoking homes, in three communities in Stockholm, Sweden, during nine 2-week periods. Each sampling site was sampled twice, once during winter and once during spring. The samples were analysed for elemental concentrations using X-ray fluorescence (XRF) spectroscopy. In all locations significantly higher outdoor concentrations were found for elements that are related to long-range transported air masses (S, Ni, Br and Pb), while only Ti was higher indoors in all locations. Similar differences for S, Br and Pb were found in both seasons for homes and schools. In preschools different seasonal patterns were seen for the long-range transported elements S, Br and Pb and the crustal elements Ti, Mn and Fe. The indoor/outdoor ratios for S and Pb suggest an outdoor PM2.5 particle net infiltration of about 0.6 in these buildings. The community located 25 km from the city centre had significantly lower outdoor concentrations of elements of crustal or traffic origin compared with the two central communities, but had similar levels of long-range transported elements. Significant correlations were found between PM2.5 and most elements outdoors (rs = 0.45-0.90). Copper levels were found to correlate well (rs = 0.64-0.91) to the traffic marker NO2 during both winter and spring in all locations. Copper may be a suitable elemental marker for traffic-related aerosols in health studies in areas without other significant outdoor Cu sources.     

基于BM和PMF模型的库尔勒市地表灰尘重金属来源解析

在新疆库尔勒市采集54个代表性地表灰尘样品,分析其中Hg、Cd、As、Pb、Cr和Cu 等6种元素含量。采用重心模型（BM模型）和正矩阵分解模型（PMF模型）,分析地表灰尘重金属元素主要来源。结果表明：库尔勒市地表灰尘中Hg、Cd、As、Pb、Cr和Cu等元素的含量重心均偏离几何中心,地表灰尘中重金属元素含量分布存在不均衡性。研究区地表灰尘中Hg和Pb受到工业、交通来源及煤炭燃烧等混合污染源的影响,As受到成土母质的影响,Cd、Cr和Cu主要受到交通排放的影响。BM模型在确定地表灰尘重金属污染来源研究上有一定的应用前景。     

Roadside Rhododendron pulchrum leaves as bioindicators of heavy metal pollution in traffic areas of Okayama, Japan

The leaves of roadside Rhododendron pulchrum Sweet were examined as a bioindicator of traffic-related heavy metal pollution in Okayama. Total contents of heavy metals in roadside soil and the R. pulchrum leaves were determined. Results of correlation analyses showed significant correlations among Pb, Ni, and Zn contents of roadside soil and leaf samples. These results suggest that R. pulchrum is a useful bioindicator of heavy metal pollution in traffic areas. To identify traffic-related heavy metal pollution sources, traffic-related materials such as tires, asphalt pavement, and road paint were collected and analyzed. The results of analyses of our data show that Zn is emitted mainly from the abrasion of tires; Cr is emitted mainly from wear of the asphalt pavement. Furthermore, the respective lead isotope ratios in R. pulchrum leaves, soil, roadside dust, and traffic-related materials were measured using inductively coupled plasma mass spectrometry. The isotopic compositions of lead in R. pulchrum leaves were 207Pb/206Pb = 0.861-0.871 and 208Pb/206Pb = 2.093-2.127, which agrees well with ratios in automobile wheel balance weights, suggesting that lead-containing products associated with automobiles, such as wheel balance weights, contribute to traffic-related lead pollution.     

Characterization and source identification of airborne trace metals in Singapore

Airborne particulate trace metals have important health implications. As a consequence, their concentrations are increasingly monitored in many urban locations worldwide. In this study, fine atmospheric particles (PM(2.5)) were collected in Singapore over a period of 83 consecutive days during 2000, and analysed to determine the concentration of trace elements using ICP-MS. Altogether, eighteen airborne trace metals were quantified: Al, Ag, Ba, Cd, Cr, Co, Cu, Fe, Ga, Li, Mn, Ni, Pb, Sr, Zn, V, Si, and Ti. While Li was the least abundant trace metal with a mean concentration of 0.2 ng m(-3), Zn showed the maximum mean concentration of 279.1 ng m(-3). Calculation of enrichment factors indicated that the elements Pb, Zn, Cd, V, Ni, Cr, and Cu were enriched by factors of 30 to 5000 relative to their natural abundance in crustal soil. The extent of metal pollution in the study area was assessed by comparing the measured concentrations to those reported in the literature for a selected number of urban sites in other parts of the world. Factor analysis was used to identify the major sources affecting particulate air pollution in Singapore. The sources that contribute to the loading of trace metal-bearing aerosols in the Singapore urban atmosphere include fuel oil-fired power plants, metal processing industry, land reclamation and construction activities, municipal solid waste incinerators, and traffic emissions.     

Macro- and microelement distribution in organs of Glyceria maxima and biomonitoring applications

The content of nutrients (N, P, K, Ca and Mg) and of trace metals (Fe, Cu, Mn, Zn, Pb, Cd, Co and Ni) in water, bottom sediments and various organs of Glyceria maxima from 19 study sites selected in the Jeziorka River was determined. In general, the concentrations of nutrients recorded in the plant material decreased in the following order: leaf>root>rhizome>stem, while the concentrations of the trace elements showed the following accumulation scheme: root>rhizome>leaf>stem. The bioaccumulation and transfer factors for nutrients were significantly higher than for trace metals. G. maxima from agricultural fields was characterised by the highest P and K concentrations in leaves, and plants from forested land contained high Zn and Ni amounts. However, the manna grass from small localities showed high accumulation of Ca, Mg and Mn. Positive significant correlations between Fe, Cu, Zn, Cd, Co and Ni concentrations in water or sediments and their concentrations in plant indicate that G. maxima may be employed as a biomonitor of trace element contamination. Moreover, a high degree of similarity was noted between self-organizing feature map (SOFM)-grouped sites of comparable quantities of elements in the water and sediments and sites where G. maxima had a corresponding content of the same elements in its leaves. Therefore, SOFM could be recommended in analysing ecological conditions of the environment from the perspective of nutrients and trace element content in different plant species and their surroundings.     

Microscopic and chemical studies of metal particulates in tree bark and attic dust: evidence for historical atmospheric smelter emissions, Humberside, UK

Tree barks and attic dusts were examined as historical archives of smelter emissions, with the aim of elucidating the pathways of pollution associated with a plume of Sn and Pb contamination in top soils, found close to the former Capper Pass smelter, Humberside, UK. Samples were collected from three villages within the area of the contamination plume. Scanning electron microscopy (SEM) and bulk chemical analyses were used to assess particle type, number and deposition patterns. SEM analysis of dusts and bark revealed that Sn and Pb particles were present in samples from all three villages along with copper, zinc and iron particles. These were almost entirely <10 microm in diameter and occurred mostly as oxides, frequently forming clusters of sub-micron crystals. Samples further from the smelter contained considerably fewer particles. We present images of smelter derived Sn particles. Chemical assays of the barks and attic dusts demonstrated that concentrations of Sn, Pb, Cu, As, Sb and Cd diminished with increasing distance from the source. Strong positive correlations were found between Sn and Pb, As, Sb and Cd in the attic dusts. Enrichment factors (EF) were calculated for these trace elements based on topsoil element concentrations obtained from the soil survey of the study area. Decreases in these trace element concentrations and EF values with distance away from the smelter are consistent with trends found in the soil survey for Sn and Pb and are typical of deposition patterns around smelter stacks. The study demonstrates that tree bark and attic dusts can be effective archives of metal particulates deposited from large static emission sources.     

Benthic foraminiferal assemblages and trace element contents from the lagoons of Orbetello and Lesina

The Italian marginal areas of Orbetello and Lesina lagoons have been investigated in order to assess the response of benthic foraminifera to the trace element contents in the sediments. The investigated lagoons are deeply affected by high values of trace elements. The lagoon of Orbetello shows the highest values of Cd, Cu, Ni, Pb, Zn, and Hg, whereas the lagoon of Lesina exhibits the highest values of As. On the basis of the trace element contents, both lagoons can be considered from moderately to strongly polluted. Biotic and abiotic factors have been investigated with multivariate technique of statistical analysis. On the basis of the trace element content, the cluster analysis reveals the occurrence of three main clusters. These natural groupings are also confirmed by the principal component analysis. The comparison of trace element concentration patterns with the Foraminiferal Abnormality Index shows a possible influence of these pollutants on the benthic foraminiferal assemblages. Generally, the highest concentrations of trace elements in the investigated areas are remarkably mirrored by the highest percentages of deformed specimens.     

Trace element concentration in groundwater of Pesarlanka Island, Krishna Delta, India

There is a growing concern over the potential accumulation of trace element concentration in groundwater of coastal aquifer owing seawater encroachment in the last several decades. A total of 29 groundwater samples collected from Pesarlanka Island, Krishna delta, Andhra Pradesh, India were analyzed for 13 trace elements (B, V, Mn, Fe, Ni, Co, Cu, Zn, As, Sr, Cd, Ba, and Pb) using inductively coupled plasma mass spectrometry. The results reveal that B, Fe, Ni, As, Sr, and Pb vary from 11.22 to 710.2, 1.25 to 684.6, 0.02 to 37.33, 27.8 to 282.3, 164.1 to 7,009, and 1.97 to 164.4 μg/l, respectively. Ba, Cd, Co, Cu, Ni, V, and Zn are almost within permissible limits for drinking water, but As, Fe, Mn, Pb, B, and Sr are above the permissible limit. The toxic element Pb is 1.64 times more than the maximum permissible limits of drinking water. The minimum value of As is also 2.78 times more, whereas the maximum is 28.2 times the permissible limit. The spatial distributions of alkaline earths (Sr, Ba), transition metals (V, Co, Ni, Fe), metallic elements (Cu, Pb), and (As) were found in considerable variation in the entire Island. Good cross-correlations were found between As, B, Co, and Sr with total dissolved solids and among other trace elements such as B, As, Co, and Sr. The variability observed within the groundwater samples is closely connected to the sea spray input; hence, it is primarily a consequence of geographical and meteorological factors, such as distance from the ocean and time of year. The trace element levels, in particular those of heavy metals, are very low, suggesting an origin from natural sources rather than from anthropogenic contamination. A few trace elements (Sr and B) are found as sensitive parameters responding to changes in fresh to saline groundwater environment. The highly elevated trace elements in this area which may be attributed to marine sediments or death and decay of plants are presented in this paper.     

Assessment of Groundwater Quality in a Structurally Deformed Granitic Terrain in Hyderabad, India

Geochemical study of groundwater from a structurally deformed granitic terrain near Hyderabad (India) was carried out to understand and evaluate the hydrogeochemical processes and quality of groundwater. Several trace elements (Fe, Mn, Be, Al, V, Cr, Co, Ni, Cu, Zn, As, Sr, Mo, Cd, Sb, Ba, Pb, U) along with major ions and minor elements were precisely estimated in shallow and drilled wells to know the suitability of water for drinking and irrigation purposes. Analytical data shows that pH and major ion chemistry in dug wells and bore wells do not vary significantly, while some trace elements (Fe, Mn, Al, Be, Co, Pb, U and Zn) vary in dug wells and bore wells, which can be attributed to differential mineral weathering and dissolution/precipitation reactions along fractures/joints. Although the water is not potable, it was found to be suitable for irrigation with little danger in the development of harmful level of exchangeable sodium. It is inferred that the chemical composition of the groundwater in this region is likely to have its origin from silicate weathering reactions and dissolution/precipitation processes supported by rainfall and groundwater flow.     

Characterization and Identification of the Sources of Chromium, Zinc, Lead, Cadmium, Nickel, Manganese and Iron in Pm10 Particulates at the Two Sites of Kolkata, India

Monitoring of ambient PM₁₀ (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 μm aerodynamic diameter) has been done at residential (Kasba) and industrial (Cossipore) sites of an urban region of Kolkata during November 2003 to November 2004. These sites were selected depending on the dominant anthropogenic activities. Metal constituents of atmospheric PM₁₀ deposited on glass fibre filter paper were estimated using Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). Chromium (Cr), zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), manganese (Mn) and iron (Fe) are the seven toxic trace metals quantified from the measured PM₁₀ concentrations. The 24 h average concentrations of Cr, Zn, Pb, Cd, Ni, Mn and Fe from ninety PM₁₀ particulate samples of Kolkata were found to be 6.9, 506.1, 79.1, 3.3, 7.4, 2.4 and 103.6 ng/m³, respectively. The 24 h average PM₁₀ concentration exceeded national ambient air quality standard (NAAQS) as specified by central pollution control board, India at both residential (Kasba) and industrial (Cossipore) areas with mean concentration of 140.1 and 196.6 μg/m³, respectively. A simultaneous meteorology study was performed to assess the influence of air masses by wind speed, wind direction, rainfall, relative humidity and temperature. The measured toxic trace metals generally showed inverse relationship with wind speed, relative humidity and temperature. Factor analysis, a receptor modeling technique has been used for identification of the possible sources contributing to the PM₁₀. Varimax rotated factor analysis identified four possible sources of measured trace metals comprising solid waste dumping, vehicular traffic with the influence of road dust, road dust and soil dust at residential site (Kasba), while vehicular traffic with the influence of soil dust, road dust, galvanizing and electroplating industry, and tanning industry at industrial site (Cossipore).     

北京灰霾天气PM10中微量元素的分布特征

采用电感耦合等离子体质谱法(ICP-MS)对北京市2008年4月和5月不同采样点采集的灰霾天PM₁₀样品中的15种微量元素进行了分析,得出了Ti、Fe、Zn、Sn、Pb为全样样品中相对含量较高元素;Ti、Mn、Ni、Cu、Zn、Pb是水溶样样品中相对含量较高元素。与晴天相比,灰霾天样品中微量元素可溶性增强,对人体危害更严重。与2002年分析数据进行对比,因2002年缺少Cr、Cd元素的测试值,全样样品中除了Co、Ni、Cu、Mo元素外,其余测试元素的浓度均有不同程度的升高,Fe和Sn元素的增幅最大。水溶样品中,参与对比元素的含量均下降。文中对含量相对较高的Cr、Mn、Fe、Cu、Zn、Cd、Sn和Pb元素进行了源解析,分析得出采样点附近的交通源及地面扬尘是这些元素的主要来源。     

Concentrations, enrichment and predominant sources of Sb and other trace elements in size classified airborne particulate matter collected in Tokyo from 1995 to 2004

APM was collected and trace elements existing in the particles were monitored since May 1995 in this study. APM sample was collected separately by size (d < 2 microm, 2-11 microm and >11 microm) on the roof of the university building (45 m above ground) in the campus of Faculty of Science and Engineering, Chuo University, Tokyo, Japan, using an Anderson low volume air sampler. The collected sample was digested by HNO3, H2O2 and HF using a microwave oven, and major elements (Na, Mg, Al, K, Ca and Fe) were measured by ICP-AES, and trace elements (Li, Be, Ti, V, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Mo, Cd, Sb, Ba and Pb) were measured by ICP-MS. It was observed that the APM concentration was higher between the winter and the spring, compared to during the summer. The enrichment factor was calculated for each element in each set of APM (d < 2 microm, 2-11 microm and >11 microm). Seasonal trends of enrichment factors were examined, and the elements were classified into 3 groups according to the common seasonal behavior. It is likely that the elements in the same group have common origins. Toxic pollutant elements (Sb, Se, Cd, Pb and As) were found in small particles with d of <2 microm in concentrated levels. Antimony (Sb) had the highest enrichment factor, and the results suggested that Sb level in APM was extremely high. The origins of Sb were sought, and wastes from plastic incineration and brake pad wears of automobiles were suspected. Each set of APM (d < 2 microm, 2-11 microm and >11 microm) was classified by the shape, and the shape-dependent constituents of a single APM particle were quantitatively measured by SEM-EDX. High concentration of Sb was found in APM <2 microm and square particles. Particles less than 2 microm and square shaped particles were major particles produced by actual car braking experiments. From these experimental results it was concluded that the source of Sb in squared APM <2 microm is considered to be from brake pad wear.     

Aerosol size distribution and mass concentration measurements in various cities of Pakistan

During March and April 2010 aerosol inventories from four large cities in Pakistan were assessed in terms of particle size distributions (N), mass (M) concentrations, and particulate matter (PM) concentrations. These M and PM concentrations were obtained for Karachi, Lahore, Rawalpindi, and Peshawar from N concentrations using a native algorithm based on the Grimm model 1.109 dust monitor. The results have confirmed high N, M and PM concentrations in all four cities. They also revealed major contributions to the aerosol concentrations from the re-suspension of road dust, from sea salt aerosols, and from vehicular and industrial emissions. During the study period the 24 hour average PM(10) concentrations for three sites in Karachi were found to be 461 μg m(-3), 270 μg m(-3), and 88 μg m(-3), while the average values for Lahore, Rawalpindi and Peshawar were 198 μg m(-3), 448 μg m(-3), and 540 μg m(-3), respectively. The corresponding 24 hour average PM(2.5) concentrations were 185 μg m(-3), 151 μg m(-3), and 60 μg m(-3) for the three sites in Karachi, and 91 μg m(-3), 140 μg m(-3), and 160 μg m(-3) for Lahore, Rawalpindi and Peshawar, respectively. The low PM(2.5)/PM(10) ratios revealed a high proportion of coarser particles, which are likely to have originated from (a) traffic, (b) other combustion sources, and (c) the re-suspension of road dust. Our calculated 24 hour averaged PM(10) and PM(2.5) concentrations at all sampling points were between 2 and 10 times higher than the maximum PM concentrations recommended by the WHO guidelines. The aerosol samples collected were analyzed for crustal elements (Al, Fe, Si, Mg, Ca) and trace elements (B, Ba, Cr, Cu, K, Na, Mn, Ni, P, Pb, S, Sr, Cd, Ti, Zn and Zr). The averaged concentrations for crustal elements ranged from 1.02 ± 0.76 μg m(-3) for Si at the Sea View location in Karachi to 74.96 ± 7.39 μg m(-3) for Ca in Rawalpindi, and averaged concentrations for trace elements varied from 7.0 ± 0.75 ng m(-3) for B from the SUPARCO location in Karachi to 17.84 ± 0.30 μg m(-3) for Na at the M. A. Jinnah Road location, also in Karachi.     

Risk assessment of trace elements in cultured freshwater fishes from Jiangxi province,China

The levels of trace elements (As, Cd, Cr, Cu, Fe, Ni, Pb, Se, and Zn) in eight species of cultured freshwater fishes from Jiangxi province were determined by inductively coupled plasma-mass spectroscopy. All the studied trace element levels in fish muscles from Jiangxi province did not exceed Chinese national standard and European Union standard, and they were often lower than previous studies. The calculated target hazard quotient values for all the studied trace elements in fish samples were much less than 1, suggesting that the studied trace elements in fish muscles from Jiangxi province had not pose obvious health hazards to consumers. As and Cd concentrations in northern snakehead were much higher than that in other fishes, demonstrating that this fish species could be valuable as a bioindicator of As and Cd in environmental surveys. In addition, the highest concentrations of Fe, Zn, and moderate contents of other essential trace elements in crucian carp indicated that crucian carp could be a good nutrient source of essential trace elements for human health.