An evaluation of alternative household solid waste treatment practices using life cycle inventory assessment mode

Waste disposal is an important part of the life cycle of a product and is associated with environmental burdens like any other life-cycle stages. In this study, an integrated assessment for solid waste treatment practices, especially household solid waste, was undertaken to evaluate the impact contribution of household solid waste treatment alternatives towards the sustainable development by using Life Cycle Inventory Assessment method. A case study has been investigated under various possible scenarios, such as (1) landfill without landfill gas recovery, (2) landfill with landfill gas recovery and flaring, (3) landfill with landfill gas recovery and electric generation, (4) composting, and (5) incineration. The evaluation utilized the Life Cycle Inventory Assessment method for multiple assessments based on various aspects, such as greenhouse gas emission/reduction, energy generation/consumption, economic benefit, investment and operating cost, and land use burden. The results showed that incineration was the most efficient alternative for greenhouse gas emission reduction, economic benefit, energy recovery, and land use reduction, although it was identified as the most expensive for investment and operating cost, while composting scenario was also an efficient alternative with quite economic benefit, low investment and operating cost, and high reduction of land use, although it was identified as existing greenhouse gas emission and no energy generation. Furthermore, the aim of this study was also to establish localized assessment methods that waste management agencies, environmental engineers, and environmental policy decision makers can use to quantify and compare the contribution to the impacts from different waste treatment options.     

An Integrated Assessment by Models for Energy Systems Analysis and Life-Cycle Assessment with a Case Study of Advanced Fossil-Fired Power Plants in China

We developed an integrated assessment (IA) using models for energy systems analysis and life-cycle assessment (LCA). Based on this assessment framework, we developed cost-benefit analysis (CBA) case studies for a hypothetical project designed to introduce advanced fossil-fired power generation technologies in China. Our MARKAL model for Japan confirmed that radical reductions (i.e., 80 % by 2050) of carbon dioxide (CO₂) could be attained from energy systems alone and that credit for emission allowances was required. We evaluated life-cycle costs and emissions of carbon dioxide, sulfur oxide, and nitrogen oxide gases for the energy technologies using an LCA model. Further, we applied a power generation planning model for six Chinese grids to provide a power mix structure, potentially producing credit by installing fossil-fired power generation technology and by using baseline grid emission factors with an average cost of electricity. Finally, by using dynamic emission reductions and additional costs from the two models, we conducted case studies of CBA for a hypothetical project to install the technologies in China. This was accomplished by evaluating emission reductions in monetary terms and by applying a life-cycle impact assessment model. A unique feature of our IA is its dynamic (time-varying) assessment of costs and benefits.     

Waste management modeling by MARKAL model: A case study for Basilicata Region

Air pollution is one of the most pressing environmental problems which affects likewise urban, industrial and rural areas. Environmental planners, regulators and decision makers need reliable, scientifically based tools to find out strategies for controlling air pollution in a cost-effective way, taking into account the whole productive system. In this framework the basic elements of energy-environmental planning have to be extended to include also waste processing technologies amongst the usually considered pollution sources. Bottom-up optimizing models, based on linear programming techniques and customized for specific cases, represent a powerful tool in energy-environmental management. This paper focuses on the integrated modeling of material flows and energy system performed on a local scale case study (Basilicata Region, Southern Italy) using the linear programming model IEA-MARKAL. We have evaluated the feasibility of the model in representing the waste management system to estimate the environmental impact of the waste processing technologies in the context of the whole productive system. A sensitivity analysis has been carried out to emphasize the connections between tariffs, waste disposal technologies assessment and atmospheric emissions. This revised version was published online in July 2006 with corrections to the Cover Date.     

Incineration of hazardous wastes

Glaxo has practiced incineration of liquid and gaseous wastes for over twenty years and currently operate eleven liquid and gas incinerators in the United Kingdom and Singapore. The liquid incinerators burn, as their main streams, those solvents that cannot be recovered and recycled within the processes. The early installations were for readily combustible solvents only. However, there has been a progressive move into the destruction of more difficult and hazardous wastes, with the consequential requirements for more sophisticated technology, in the belief that the responsible destruction of waste should be tackled near to its source. The eventual aim is to be self-sufficient in this area of waste management. The incineration of hazardous liquid and gaseous waste has presented a series of design, operational and monitoring problems into account which have all been successfully overcome. The solutions take into account the environmental consequences of the operations from both liquid and gaseous emissions. In order to ensure minimal environmental impact and safe operation the best practicable technology is employed. Environmental assessment forms part of the process development and permitting procedures.Plenary speaker.     

Exploring the “not in my backyard” effect in the construction of waste incineration power plants - based on a survey in metropolises of China

Waste incineration power plants have become the best option in face of the increasing amount of garbage in China's cities. However, constructing waste incineration power plants will cause “not in my backyard” (NIMBY) effect in the public. To identify variables causing this effect and measure the effect quantitatively, we designed and carried out a random survey in four metropolises in China. Of the 3133 questionnaires distributed, 3066 are thought to be effective. Males, persons with higher educational levels, or with higher income, or having underaged children in their families, or thinking their neighborhoods are upscale ones are willing to pay more to avoid the construction of waste incineration power plants in their surroundings than others. In addition, provided that the respondents deem that the construction of waste incineration power plants would have an impact on their lives, they are willing to pay more no matter they own their departments or not. Finally, the estimated willingness to pay (WTP) to avoid the waste incineration power plants is 105 yuan to 133 yuan per month. Hence, the government should treat the NIMBY syndrome well in the construction of waste incineration power plants, with WTP being one perspective to persuade the public.     

重点区域生活垃圾焚烧行业实施大气污染物超低排放的可行性技术路线研究

随着中国城镇化建设进程的不断加快，生活垃圾焚烧行业迅猛发展。在钢铁、焦化以及燃煤电厂等行业已实施超低排放的情况下，推行生活垃圾焚烧行业超低排放，对进一步改善大气环境具有积极意义。国内一些省份和城市已经或者正在制定生活垃圾焚烧行业地方标准，积极推动行业污染物超低排放。笔者结合各地经验，探讨了4种不同技术方式、不同运行成本的超低排放可行性技术路线，为重点区域垃圾焚烧实施超低排放提供参考和依据。     

危险废物焚烧处置项目竣工环境保护验收监测要点

对危险废物焚烧处置项目竣工环境保护验收监测中尚需明确的要点进行了剖析,并从入炉危废种类及比例、焚烧量的控制、助燃剂加入量、空气过剩系统的把握,以及安全管理检查要点等方面,提出相应的解决办法。     

POPs废物处置技术筛选研究

采用层次分析法对国际上较为成熟的9种POPs废物处置技术进行综合评价,筛选了适合我国POPs废物处置的技术。从经济指标、环境指标和技术指标3个影响因素建立递阶层次结构模型,每个指标又细分为若干个子准则。根据模型及评价指标体系设计专家咨询表,发放给POPs相关领域的专家进行打分。采用matlab对评价结果进行数值分析,得...     

生活垃圾与危险废物焚烧二噁英类排放特征研究

对某省52家焚烧企业(21家生活垃圾和31家危险废物)排放烟气数据进行了分析,结果表明,两类焚烧企业二噁英类17种单体分布有所不同,生活垃圾焚烧烟气中浓度较高的是O8CDD和O8CDF;危险废物焚烧烟气中较大的是2,3,4,7,8-P5CDF、2,3,7,8-T4CDD和1,2,3,7,8-P5CDD;两类焚烧企业二噁英类单体对I-TEQ贡献最高的都是2,3,4,7,8-P5CDF,贡献率分别为0. 7%～45%和10%～67%;两者的17种二噁英类与I-TEQ的相关性分析表明,1,2,3,7,8-P5CDF在2类焚烧炉中与I-TEQ均存在较高的相关性,其相关系数分别0. 932和0. 927,可以作为潜在的测定指示物。     

垃圾焚烧飞灰中二噁英类的研究概况

随着垃圾焚烧技术的推广应用,焚烧产生的污染越来越受关注,本文介绍了二噁英的检测方法、垃圾焚烧飞灰中二噁英的分布、影响因素及飞灰的处置和综合利用技术研究概况。     

Assessment of potential impacts of municipal solid waste treatment alternatives by using life cycle approach: a case study in Vietnam

In Vietnam, most of municipal solid waste (MSW) is disposed of at open dumping and landfill sites, and the methane gas from waste is the un-ignorable source of greenhouse gas (GHG) emission. It is indispensable to explore the possibility for GHG mitigation in MSW management. The objective of this study was to estimate alternative waste treatment practices towards the GHG emission mitigation, energy consumption and generation, reduction of landfill volume, and various benefits for proposing the appropriate selection by scenario analyses for representative Vietnam’s cities. Impacts were calculated by utilizing life cycle assessment (LCA) method. A literature review survey on the current applicability of LCA database for assessing impacts from waste sector in developing countries, especially for Vietnam, was carried out. This study assessed the contribution of alternative solid waste treatment practices. The result showed that, except investment and operation costs, incineration with energy recovery seems the suitable alternative for treating waste from representative cities of Vietnam according to reduction of GHG emission and waste burden to landfill sites and energy recovery and generation. Besides, MSW composition was identified as an important factor directly influencing to impacts as well as other products and benefits of waste treatment alternatives. Reliable data on waste composition are indispensable for assessing to choose, improve, or plan the waste treatment practices towards sustainable development.     

生活垃圾焚烧二噁英排放对人群健康影响研究进展

综述了二噁英对人体健康的危害特性, 以及我国生活垃圾焚烧厂二噁英排放浓度水平，及其周边环境空气和土壤中二噁英污染浓度水平、人群暴露途径、剂量和健康影响。指出，现有研究显示，我国生活垃圾焚烧排放的二噁英浓度在合理范围之内，垃圾焚烧厂周边人群二噁英暴露量普遍低于世界卫生组织（WHO）推荐的容许标准，但也有研究发现，垃圾焚烧会导致周边环境介质中二噁英浓度水平增高。提出，应重点关注垃圾焚烧排放二噁英的长期低剂量暴露对人群健康的影响。     

广州生活垃圾处理的思路与对策

简述了广州生活垃圾生成与处理的现状。指出了广州生活垃圾处理存在的主要问题,对广州市未来10 a—15 a生活垃圾产生量进行了预测。在对生活垃圾填埋和焚烧处理成本进行比较的基础上,提出了广州生活垃圾处理的行动内容。     

Global warming potential of food waste through the life cycle assessment: An analytical review

Food loss and waste represent an increasing concern under social, economic and environmental perspective, either in developed or developing realities. It is estimated that more than 1.3 billion tons of food waste are generated along the whole food supply chain, from agricultural to final consumption stages, with associated environmental impacts estimated in approximately 3.3 Gigatons of CO₂ equivalent per year (6% of total anthropogenic greenhouse gases emissions). Indeed, food waste issue has been accounted among the 17 Sustainable Development Goals in terms of responsible production and consumption, with the aim of halving per capita global food waste and reduce food losses by 2030. The present paper, through a systematic, analytical and configurative review on food waste global warming potential, focuses on the role of Life Cycle Assessment and its related opportunities and challenges along upstream, core and downstream stages, considering at the same time the challenges embedded within alternative disposal technologies. Through the choice of 16 different research string and the selection of 33 papers out of more than 2000 articles between 2011 and 2021, the authors highlight the environmental impacts associated to food waste with regards to: (a) entire food baskets; (b) specific food commodities; (c) food service and households' experiences; (d) diverse disposal alternatives (e.g., anaerobic digestion, incineration, landfill), addressing future research and suitable opportunities to reach national and international sustainable goals.     

北京市废弃物处理温室气体排放特征

基于《2006年IPCC国家温室气体清单指南》推荐的方法，结合《省级温室气体清单编制指南（试行）》和《城市温室气体核算工具指南》的部分数据与核算范围，针对固体废弃物填埋、焚烧和废水处理等过程，核算了北京市2005-2014年废弃物处理过程中温室气体总排放量。结果表明：2005-2014年北京市废弃物处理过程温室气体总排放量呈逐渐上升趋势，2014年温室气体总排放量比2005年增长98%。10年间，固体废弃物填埋过程一直是最主要的温室气体排放源，到2014年排放量达到最大，为416.3×10⁴t二氧化碳当量（CO₂e）。废弃物填埋、废水处理和废弃物焚烧过程占总排放量的比例分别为78.5%（CO₂e质量分数，下同）、13.5%和8%。结合已有研究，系统优化国内7个典型城市废弃物处理温室气体排放因子，核算7个城市排放情况，并对比分析了北京市排放情况。     

Deterministic and Stochastic Simulations for Solid Waste Collection Systems – A SWIM Approach

The SWIM model is the first systems model in Australia that deals with integrated waste management systems. The main modelling approach adopted is simulation, which is based on both deterministic and stochastic models for collection systems.These models are described in this paper, after a number of modelling approaches are reviewed. An example of the application of the SWIM model is given, and planned extensions to the SWIM model are briefly outlined.     

长江经济带工业来源危险废物污染与处理特征分析及监管对策建议

依据2017年环境统计数据, 分析了长江经济带工业危险废物的污染及处理特征:长江经济带危废产生 量较大的省份是江苏、浙江、云南、湖南和四川；危废种类主要是来源于化工、钢铁、有色和造纸行业的废酸、有色金属冶炼废物、废碱和焚烧处置残渣；各地对危废的处理情况各有优劣。根据以上特征,提出加强对重点 区域的监管和调度,针对特定行业和危废种类,建议出台最佳可行的处理技术,建立区域之间危废管理大平台,促进区域危废处理优势互补和均衡发展,挖掘企业自行处理能力,减轻危废集中处理压力。     

The analysis of flue gas treatment residues using non-destructive X-ray fluorescence as a regulatory compliance test

Current and proposed European Union (EU) regulations require the residual material from municipal solid waste incineration to be characterised prior to disposal. X-Ray fluorescence (XRF) provides a rapid and non-destructive technique for analysing such materials.     

Toxic Environmental Releases from Medical Waste Incineration: A Review

Toxic releases from medical waste incineration comprising organic emissions such as polychlorinated dibenzo-dioxin/furan (PCDD/Fs) and polycyclic aromatic hydrocarbons (PAHs), inorganic emissions and ashes containing toxic metals have been reviewed. Attempts made by various investigators to reduce/eliminate emissions have also been included. Legislations concerning emission standards for medical waste incinerators have been discussed.     

Leachate of fly ash derived from refuse incineration

For highly urbanized cities where there is a scarcity of land available for landfilling, incineration of refuse is a feasible solution for solid waste disposal. After incineration, about 20% by weight of fly ash and other residues are produced and disposed of by landfill. Leachate tests carried out on samples of fly ash show that the heavy metal concentrations of the leachate are in excess of the permissible limits set by WHO. Lime and cement are used to stabilize the fly ash. The concentrations of heavy metals in the leachates of lime and cement treated fly ash are non-detectable. In additional to pollution control, the lime and cement treated fly ash significantly improves the properties of soft clay.