Advances in the determination of inorganic ions in potable waters by ion chromatography

Ion chromatography (IC) is now a well-established methodology for the analysis of ionic species. The technique is applicable to the determination of a wide range of solutes in many sample types, although the determination of inorganic ions in potable waters continues to be the most widely used application of ion chromatography. Many standardization and regulatory bodies, such as the American Society for Testing and Materials (ASTM), International Organization for Standardization (ISO), and US Environmental Protection Agency (EPA), have approved methods of analysis based upon IC, most of which have been published within the last decade. Recent developments in the field of IC, such as the use of higher capacity columns, larger loop injections, more complex sample preparation and detection schemes, have been incorporated into these new approved methods. These advances allow the determination of environmentally significant contaminants, such as common inorganic anions, bromate, perchlorate and chromate, at trace levels in potable waters using ion chromatography.     

Development of an extraction method for perchlorate in soils

Perchlorate originates as a contaminant in the environment from its use in solid rocket fuels and munitions. The current US EPA methods for perchlorate determination via ion chromatography using conductivity detection do not include recommendations for the extraction of perchlorate from soil. This study evaluated and identified appropriate conditions for the extraction of perchlorate from clay loam, loamy sand, and sandy soils. Based on the results of this evaluation, soils should be extracted in a dry, ground (mortar and pestle) state with Milli-Q water in a 1 ratio 1 soil ratio water ratio and diluted no more than 5-fold before analysis. When sandy soils were extracted in this manner, the calculated method detection limit was 3.5 microg kg(-1). The findings of this study have aided in the establishment of a standardized extraction method for perchlorate in soil.     

The distribution and composition of hydrocarbons in sediments from the Fladen Ground, North Sea, an area of oil production

The distribution and composition of hydrocarbons in sediment from the Fladen Ground oilfield in the northern North Sea have been investigated. The total PAH concentrations (2- to 6-ring parent and alkylated PAHs, including the 16 US EPA PAHs) in sediments were relatively low (<100 microg kg(-1) dry weight). The PAH, the Forties crude and diesel oil equivalent concentrations were generally higher in sediment of fine grain size and higher organic carbon concentration. PAH distributions and concentration ratios indicated a predominantly pyrolytic input, being dominated by the heavier, more persistent, 5- and 6-ring compounds, and with a high proportion of parent PAHs. The n-alkane profiles of a number of the sediments contained small, high boiling point, UCMs, indicative of weathered oil arising from a limited petrogenic input. The geochemical biomarker profiles of the sediments that contained UCMs showed a small bisnorhopane peak and a high proportion of norhopane relative to hopane, indicating that there was contamination from both Middle Eastern and North Sea oils. Therefore contamination was not directly as a result of oil exploration activity in the area. The most likely source of petrogenic contamination was from general shipping activity.     

Assessment of potential hazards of fluoride contamination in drinking groundwater of an intensively cultivated district in West Bengal, India

We assessed the potential of fluoride (F) contamination in drinking groundwater of an intensively cultivated district in India as a function of its lithology and agricultural activities. Three hundred and eight groundwater samples were collected at different depths from various types of wells and analyzed for pH, EC, NO(3)-N load and F content. A typical litholog was constructed and database on fertilizer and pesticide uses were also recorded for the district. The water samples were almost neutral in reaction and non-saline in nature with low NO(3)-N content (0.02 to 4.56 microg mL(-1)). Fluoride content in water was also low (0.01 to 1.18 microg mL(-1)) with only 2.27% of them exceeding 1.0 microg mL(-1) posing a potential threat of fluorosis. On average, its content varied little spatially and along depth of sampling aquifers because of homogeneity in lithology of the district. The F content in these samples showed a significant positive correlation (r = 0.12, P < or = 0.05) with the amount of phosphatic fertilizer (single super phosphate) used for agriculture but no such relation either with the anthropogenic activities of pesticide use or NO(3)-N content, pH and EC values of the samples was found. The results suggest that the use of phosphatic fertilizer may have some role to play in F enrichment of groundwater.     

Assessment of the potential hazards of nitrate contamination in surface and groundwater in a heavily fertilized and intensively cultivated district of India

We made an inventory of nitrate (NO3-N) enrichment in surface and groundwater systems in the Hooghly district of India owing to intensive farming with high fertilizer doses as a function of quantity of fertilizers use, soil characteristics, types of crop grown, depth of groundwater sampling and also N-load in soil profiles. Water samples were collected from different sources at 412 odd sites spread over in 17 blocks of the district along with representative soil profiles. On average, the study area had high clay and NO3-N in soil profiles with an increasing and decreasing trends along depth, respectively. The NO3-N content both in surface and groundwater varied from 0.01 microg mL(-1) to 4.56 microg mL(-1), being well below the threshold limit of 10 microg mL(-1) fixed by WHO for drinking purpose. The content decreased with increasing depth of wells (r = -0.39**) and clay content of soil profiles (r = -0.31**). It, however, increased with increasing rate of fertilizer application (r = 0.72**), NO3-N load in soil profiles (r = 0.85**) and was higher in areas where shallow--rather than deep-rooted crops are grown. Results indicated even under fairly high quantity of fertilizer use, groundwater of the study area is safe for drinking purpose.     

离子色谱法-抑制型电导检测城市污水中的高氯酸根

利用离子色谱法-抑制型电导检测了城市污水中的持久污染物高氯酸根,以IonPac AS20高容量强亲水阴离子交换柱分离,NaOH流动相等度淋洗,高氯酸根在12min内出峰。高氯酸根在0.01~50 mg/L内具有良好的线性,相关系数为0.9998,50μl进样时检出限可达到3μg/L。方法可用于多种城市污水中高氯酸根的监测,样品测定的标准相对偏差在0.60%~0.94%之间,加标回收率在97.3%~105.8%之间,具有较好的准确性和重现性。     

Separation and determination of trace levels of aromatic amines by HPLC

Aromatic amines were analysed by normal phase and reverse phase high performance liquid chromatography employing silica gel and octadecyl silane (ODS) columns, respectively. A number of mobile phases were used. The results obtained on silica gel column were compared with those achieved on reverse phase column. Excellent results were obtained on ODS and shoulder peaks were eliminated when a mixture of methyl alcohol and sodium perchlorate was used as mobile phase.     

超声提取-离子色谱法测定常见土壤中的高氯酸盐

建立了测定土壤中高氯酸盐的离子色谱法,通过前处理条件优化和色谱条件优化形成准确高效的测定方法,并采集实际土壤样品进行实验验证。称取 1.00 g土壤样品,用20 mL超纯水混合均匀,超声提取40 min,离心后采用水系微孔滤膜过滤的前处理方式,土壤中高氯酸盐的加标回收率最稳定;在淋洗液浓度和流速都满足测定条件的前提下,为了缩短高氯酸盐的保留时间,避免复杂基质干扰,延长淋洗液发生器的使用寿命以及保护色谱柱,选择淋洗液浓度为40 mmol/L,流速为1.0 mL/min。在优化条件下,高氯酸盐的方法检出限为0.04 mg/kg。实际样品加标中高氯酸盐的相对标准偏差为1.9%~8.8%,加标回收率为91.0%~106%,结果表明离子色谱法测定土壤中高氯酸盐简单、灵敏、快速。     

Bromate analysis in groundwater and wastewater samples

Bromate (BrO(3)(-)) is a disinfection by-product formed during ozonation of potable water supplies containing bromide (Br(-)). Bromate has been classed by the World Health Organisation as a 'possible human carcinogen', leading to implementation of 10-25 microg L(-1)(as BrO(3)(-)) drinking water limits in legislative areas including the United States and European Union. Techniques have been developed for bromate analysis at and below regulatory limits, with Ion Chromatography (IC) coupled with conductivity detection (IC-CD), post-column reaction and ultra-violet (UV) detection (IC-PCR), or inductively coupled plasma-mass spectrometry detection (IC-ICPMS) in widespread use. The recent discovery of bromate groundwater contamination in a UK aquifer has led to a requirement for analysis of bromate in a groundwater matrix, for environmental monitoring and development of remediation strategies. The possibility of bromate-contaminated water discharge into sewage treatment processes, whether accidental or as a pump-and-treat strategy, also required bromate analysis of wastewater sources. This paper summarises techniques currently available for trace bromate analysis in potable water systems and details studies to identify a methodology for routine analysis of groundwater and wastewater samples. Strategies compared were high performance liquid chromatography (HPLC) with direct UV or PCR/UV detection, IC-CD, IC-PCR, and a simple spectrophotometric technique. IC-CD was the most cost-effective solution for simultaneous analysis of bromate and bromide within groundwater samples, having a 5 microg L(-1) detection limit of both anions with limited interference from closely-eluting species. Wastewater samples were successfully analysed for bromate only using HPLC with PCR/UV detection, with detection limits below 20 microg L(-1)(as BrO(3)(-)) and low interference. HPLC with direct UV detection was unsuitable for bromate analysis within the concentration range 50-5000 microg L(-1) which was required for this project, but column choice was shown to be a major factor in determining limits of detection. Spectrophotometry could not reproducibly determine bromate concentration, although the technique showed promise as a quick field method for high-level groundwater bromate analysis.     

Concentrations and inventories of polycyclic aromatic hydrocarbons and organochlorine pesticides in watershed soils in the Pearl River Delta,China

The concentration levels, source, and inventories of polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides (OCPs) in 55 surface vegetable soils in the watershed of the Pearl River Delta (PRD) were analyzed and compared with those of the surface sediments in the Pearl River Estuary (PRE) and northern South China Sea (SCS). The 16 priority PAHs on US EPA list range from 58 to 3,077 microg/kg (average: 315 microg/kg). The concentrations of DDTs and HCHs range from 3.58 to 831 microg/kg (average: 82.1 microg/kg) and from 0.19 to 42.3 microg/kg (average: 4.42 microg/kg). The ratios of DDT/ (DDD+DDE) are higher than 2 in majority of the soil samples, suggesting that DDT contamination still exists. The PAH ratios suggest that the source of PAHs is petroleum, and combustion of fossil fuel, biomass, and coal. The average concentrations of PAHs and the linear regression slope between PAHs and TOC for the soils and the sediments are quite similar. It was estimated that the soil mass inventories at 0-20 cm depth are 1,292 metric tons for PAHs and 356 metric tons for OCPs in the studied region. The average PAHs inventory per unit area for the soil samples investigated in PRD is about 0.86 time that of surface sediments in the Pearl River Estuary, and about 2.43 times that of surface sediments in the northern South China Sea. PAHs in the soils in PRD have similar source to those of the surface sediments in PRE. All of those may suggest that PAHs in PRE and SCS are probably mainly inputted from the soils in PRD via soil erosion and river transport.     

Contamination from historic metal mines and the need for non-invasive remediation techniques: a case study from Southwest England

The UK is legally required by the EU Water Framework Directive (WFD) to improve the environmental quality of inland and coastal waters in the coming years. Historic metal mine sites are recognised as an important source of some of the elements on the WFD priority chemicals list. Despite their contamination potential, such sites are valued for their heritage and for other cultural and scientific reasons. Remediating historic mining areas to control the contamination of stream waters, whilst also preserving the integrity of the mine site, is a challenge but might be achieved by novel forms of remediation. In this study, we have carried out environmental monitoring at a historic, and culturally-sensitive, lead-silver mine site in southwest England and have undertaken a pilot experiment to investigate the potential for a novel, non-invasive remediation method at the site. Concentrations of Pb and Zn in mine spoil were clearly elevated with geometric mean concentrations of 6,888 and 710 microg g(-1), respectively. Mean concentrations of Pb in stream waters were between 21 and 54 microg l(-1), in exceedance of the WFD environmental quality standard (EQS) of 7.2 microg l(-1) (annual average). Mean Zn concentrations in water were between 30 and 97 microg l(-1), compared to the UK EQS of 66.5 microg l(-1) (average). Stream sediments within, and downstream from, the mining site were similarly elevated, indicating transport of mine waste particles into and within the stream. We undertook a simple trial to investigate the potential of hydroxyapatite, in the form of bonemeal, to passively remove the Pb and Zn, from the stream waters. After percolating through bonemeal in a leaching column, 96-99% of the dissolved Pb and Zn in stream water samples was removed.     

Perchlorate retention and mobility in soils

Adsorption and release of perchlorate in a variety of soils, minerals, and other media were studied when the solid media were exposed to low and high aqueous solutions of perchlorate salts. Low level ClO4- exposure was investigated by subjecting triplicate 5.0 g portions of a solid medium (38 different soils, minerals, or dusts) to 25 mL of an aqueous ammonium perchlorate (NH4ClO4) solution containing 670 ng mL(-1) (6.8 microM) perchlorate. This corresponds to a perchlorate-to-soil ratio of 3.4 microg g(-1) (34 nmol g(-1)). At this level of exposure, more than 90% of the perchlorate was recovered in the aqueous phase, as determined by ion chromatography. In some cases, more than 99% of the perchlorate remained in the aqueous phase. In some cases, the apparent loss of aqueous perchlorate was not clearly distinguishable from the variation due to experimental error. The forced perchlorate anion exchange capacities (PAECs) were studied by soaking triplicate 5.0 g portions of the solid media in 250 mL of 0.20 M sodium perchlorate (NaClO4) followed by repeated deionized water rinses (overnight soaks with mixing) until perchlorate concentrations fell below 20 ng mL(-1) in the rinse solutions. The dried residua were leached with 15.0 mL of 0.10 M sodium hydroxide. The leachates were analyzed by ion chromatography and the perchlorate concentrations thus found were subsequently used to calculate the PAECs. The measurable PAECs of the insoluble and settleable residua ranged from 4 to 150 nmol g(-1) (micromol kg(-1)), with most in the 20-50 nmol g(-1) range. In some soils or minerals, no sorption was detectable. The mineral bentonite was problematic, however. Overall, the findings support the widely accepted idea that perchlorate does not appreciably sorb to soils and that its mobility and fate are largely influenced by hydrologic and biologic factors. They also generally support the idea that intrasoil perchlorate content is depositional rather than sorptive. On the other hand, sorption (anion replacement) of perchlorate appears to occur in some soils. Therefore, the measurement of perchlorate in soils requires accounting for ion exchange phenomena; leaching with water alone may give inaccurate results. If perchlorate anion exchange is confirmed to be negligible, then leaching procedures may be simplified accordingly.     

Solid phase extractive preconcentration of silver from aqueous samples

N,N-dibutyl-N1-benzoylthiourea (DBBT) impregnated onto a polymeric matrix, Amberlite XAD-16 was prepared. The separation and enrichment of Ag(I) from solution was investigated. Effective extraction conditions were optimized in column methods prior to determination by atomic absorption spectrometry. The optimum pH range for quantitative adsorption is 2-5. Quantitative recovery of Ag was achieved by stripping with 1 mol L(-1) thiourea in 1 mol L(-1) HCl. The sorption capacity of resin is 0.115 mmol Ag+ g(-1) resin. The relative standard deviation and detection limit was 3.1% for 1 microg Ag+ mL(-1) solution and 0.11 microg L(-1), respectively. The method was used for the determination of silver in geological water samples.     

Natural and anthropogenic enrichments of molybdenum, thorium, and uranium in a complete peat bog profile, Jura Mountains, Switzerland

A core from an ombrotrophic Swiss bog representing 12 370 (14)C years of peat accumulation was evaluated as a possible archive of atmospheric deposition of Mo, Th and U. Calcium, Sr, and Ba were also determined to quantify weathering inputs, Mn to follow possible redox transformations, and Rb to identify plant uptake. Each of these elements was determined using ICP-MS, following digestion in a microwave heated autoclave using 3 ml HNO(3) and 0.1 ml HBF(4). Calcium and Sr clearly identify the thickness of the ombrotrophic zone because they are enriched in the minerogenic zone relative to the concentration of mineral matter. The concentration of Ba, however, is proportional to the concentration of mineral matter in all samples, and is not added to peat column by weathering reactions at the peat-sediment interface. The lowest element concentrations are found during the Holocene climate optimum (5320 to 8030 (14)C year BP) with the following natural background values (n= 18): Mo 0.08 +/- 0.02 microg g(-1), U 0.029 +/- 0.008 microg g(-1), Ba 5.2 +/- 2.6 microg g(-1), Th 0.070 +/- 0.022 microg g(-1) and Rb 0.63 +/- 0.09 microg g(-1). By far the highest concentrations of Ba, Mn, Rb and Th were found during the Younger Dryas cold climate event (10 590 (14)C year BP) when the flux of atmospheric soil dust was at its post-glacial maximum. Molybdenum and U are elevated in concentration throughout the minerogenic zone because of sediment weathering and this masks the atmospheric signal in samples older than ca. 8000 (14)C year BP (ca. 9000 calendar years). Enrichment factors (EF) calculated using Sc as a conservative, lithogenic element shows that minerogenic peats are enriched in Mo up to 18x and U 26x, relative to the natural "background" values. During the two millennia prior to industrialisation, the accumulation rate of atmospheric Mo averaged 0.23 +/- 0.13 microg m(-2) year(-1). With the onset of the Industrial Revolution, Mo accumulation rates rapidly and continuously increased to approximately 10 microg m(-2) year(-1) in the late 1980s. These data suggest that Mo in atmospheric aerosols today is derived predominately from anthropogenic emissions. Uranium does not show the same enrichment pattern which suggests that steel-making rather than coal combustion is the primary source of atmospheric Mo contamination at this site.     

Perchlorate contamination of groundwater from fireworks manufacturing area in South India

Perchlorate contamination was investigated in groundwater and surface water from Sivakasi and Madurai in the Tamil Nadu State of South India. Sensitive determination of perchlorate (LOQ?=?0.005 μg/L) was achieved by large-volume (500 μL) injection ion chromatography coupled with tandem mass spectrometry. Concentrations of perchlorate were <0.005–7,690 μg/L in groundwater (n?=?60), <0.005–30.2 μg/L in surface water (n?=?11), and 0.063–0.393 μg/L in tap water (n?=?3). Levels in groundwater were significantly higher in the fireworks factory area than in the other locations, indicating that the fireworks and safety match industries are principal sources of perchlorate pollution. This is the first study that reports the contamination status of perchlorate in this area and reveals firework manufacture to be the pollution source. Since perchlorate levels in 17 out of 57 groundwater samples from Sivakasi, and none from Madurai, exceeded the drinking water guideline level proposed by USEPA (15 μg/L), further investigation on human health is warranted.     

Formaldehyde determination in seawater. Preliminary application to coastal samples at Terra Nova Bay (Antarctica)

A sensitive spectrofluorimetric-FIA (flow injection analysis) method for formaldehyde (HCHO) determination was improved with the aim of analysing seawater samples.The fluorescence emission versus HCHO concentration shows a linear pattern from sub microg L(-1) to about 1000 microg L(-1). The reproducibility at 15 ppb level is about 2%. Interferences from other aldehydes were checked; only glyoxal shows a significative interference, but only when its concentration is about 6000 times higher than that of formaldehyde. Superficial (microlayer, just sub-pack or sea-ice free sea surface) and deep (along the water column, sub-pack or in sea-ice free areas) seawater samples were collected near the coast at Terra Nova Bay (Ross Sea, Antarctica) during the 1998/1999 and 2001/2002 Italian Antarctic Expedition. We report here the preliminary results of the spectrofluorimetric-FIA determination of the HCHO content. The mean seawater superficial formaldehyde concentration was 15 microg L(-1); the concentration along the water column ranged between 4.5 to over 40 microg L(-1)(20 microg L(-1) mean concentration), usually with a maximum value for the 30 m depth, corresponding to a fluorescence maximum. The sampling was repeated 7 times in the austral summer in order to evaluate seasonal changes in the formaldehyde concentration/seawater depth profiles. The results show changes in the formaldehyde concentration at different depths.     

Spatial variability of soil total and DTPA-extractable cadmium caused by long-term application of phosphate fertilizers, crop rotation, and soil characteristics

Increasing cadmium (Cd) accumulation in agricultural soils is undesirable due to its hazardous influences on human health. Thus, having more information on spatial variability of Cd and factors effective to increase its content on the cultivated soils is very important. Phosphate fertilizers are main contamination source of cadmium (Cd) in cultivated soils. Also, crop rotation is a critical management practice which can alter soil Cd content. This study was conducted to evaluate the effects of long-term consumption of the phosphate fertilizers, crop rotations, and soil characteristics on spatial variability of two soil Cd species (i.e., total and diethylene triamine pentaacetic acid (DTPA) extractable) in agricultural soils. The study was conducted in wheat farms of Khuzestan Province, Iran. Long-term (27-year period (1980 to 2006)) data including the rate and the type of phosphate fertilizers application, the respective area, and the rotation type of different regions were used. Afterwards, soil Cd content (total or DTPA extractable) and its spatial variability in study area (400,000 ha) were determined by sampling from soils of 255 fields. The results showed that the consumption rate of di-ammonium phosphate fertilizer have been varied enormously in the period study. The application rate of phosphorus fertilizers was very high in some subregions with have extensive agricultural activities (more than 95 kg/ha). The average and maximum contents of total Cd in the study region were obtained as 1.47 and 2.19 mg/kg and DTPA-extractable Cd as 0.084 and 0.35 mg/kg, respectively. The spatial variability of Cd indicated that total and DTPA-extractable Cd contents were over 0.8 and 0.1 mg/kg in 95 and 25 % of samples, respectively. The spherical model enjoys the best fitting and lowest error rate to appraise the Cd content. Comparing the phosphate fertilizer consumption rate with spatial variability of the soil cadmium (both total and DTPA extractable) revealed the high correlation between the consumption rate of P fertilizers and soil Cd content. Rotation type was likely the main effective factor on variations of the soil DTPA-extractable Cd contents in some parts (eastern part of study region) and could explain some Cd variation. Total Cd concentrations had significant correlation with the total neutralizing value (p?<?0.01), available P (p?<?0.01), cation exchange capacity (p?<?0.05), and organic carbon (p?<?0.05) variables. The DTPA-extractable Cd had significant correlation with OC (p?<?0.01), pH, and clay content (p?<?0.05). Therefore, consumption rate of the phosphate fertilizers and crop rotation are important factors on solubility and hence spatial variability of Cd content in agricultural soils.     

The early warning of aquatic organophosphorus pesticide contamination by on-line monitoring behavioral changes of Daphnia magna

In this paper, the movement behavior of Daphnia magna was studied as a bio-indicator of organophosphorous pesticide (OP) contamination, using an on-line bio-monitoring method, the Multispecies Freshwater Biomonitor. A static test of acute toxicity test revealed the 24-h and 48-h LC(50) values (95% confidence limit) for Daphnia magna to be respectively 0.45 microg/l and 0.21 microg/l for dipterex 3.80 microg/l and 0.90 microg/l for malathion, and 1.25 microg/l and 0.38 microg/l for parathion. The behavior strength of Daphnia magna was a sensitive indicator of sublethal OP stress and resulted in significant concentration-response relationships for the three OPs. Increasing OP concentration will result in more intensive behavioral responses of Daphnia magna and shorter response time, which could be described by the Stepwise Stress Model (SSM). Therefore movement behavior can be effectively applied in early warning of environment quality by on-line bio-monitoring. The intensive changes in behavior strength of Daphnia magna over a short time follow the SSM concept and can be used as an indicator of early stress response to OP accidental contamination.     

Diffusive sampling of methyl isocyanate using 4-nitro-7-piperazinobenzo-2-oxa-1,3-diazole (NBDPZ) as derivatizing agent

A diffusive sampling method for the determination of methyl isocyanate (MIC) in air is introduced. MIC is collected using a glass fiber filter impregnated with 4-nitro-7-piperazinobenzo-2-oxa-1,3-diazole (NBDPZ). The urea derivative formed is desorbed from the filter with acetonitrile and analyzed by means of high-performance liquid chromatography (HPLC) using fluorescence detection (FLD) with lambdaex = 471 nm and lambdaex = 540 nm. Additionally, a method was developed using tandem mass spectrometric (MS-MS) detection, which was performed as selected reaction monitoring (SRM) on the transition [MIC-NBDPZ + H]+ (m/z 307) to [NBDPZ + H]+ (m/z 250). The diffusive sampler was tested with MIC concentrations between 1 and 35 microg m(-3). The sampling periods varied from 15 min to 8 h, and the relative humidity (RH) was set from 20% up to 80%. The sampling rate for all 15 min experiments was determined to be 15.0 mL min(-1) (using HPLC-FLD) with a relative standard deviation of 9.9% for 56 experiments. At 80% RH, only 15 min sampling gave acceptable results. Further experiments revealed that humidity did not affect the MIC derivative but the reagent on the filter prior to and during sampling. The sampling rate for all experiments (including long term sampling) performed at 20% RH was found to be 15.0 mL min(-1) with a relative standard deviation of 6.3% (N = 42). The limit of quantification was 3 microg m(-3) (LC-MS-MS: 1.3 microg m(-3)) for 15 min sampling periods and 0.2 microg m(-3) (LC-MS-MS: 0.15 microg m(-3)) for 8 h sampling runs applying fluorescence detection.     

Effect of application of phosphate and organic manure-based fertilizers on arsenic transformation in soil columns

The mobility of arsenic in Cambisol under the influence of added barnyard manure and application of a phosphate solution to the soil was described on the basis of column experiments. A soil sample containing 126 mg/kg total As and 3.72 mg/kg specifically-sorbed As was extracted using demineralized water (DIW) or a 28 μmol/l phosphate solution in a column containing untreated soil and in a column with added barnyard fertilizer. The pH, Eh, alkalinity, main components, including DOC, and selected trace elements (Al, Mn, Pb, Cu, Zn, Cd, Cr, Co, Ni, Ba and As) were determined in the extracts. Hydrodynamic tests of the flow and transport of the substances in the columns were carried out. The addition of barnyard manure was manifested in elevated concentrations of the main inorganic components, DOC and Al and a decrease in the Eh value and Mn concentration. Application of a phosphate solution was manifested in a decrease in the NO₃ and SO₄ concentrations, probably as a result of the effect of increased biological fixation. The As concentration in extracts varied from 8.8 to 15.5 μg/l and was not dependent on the composition of the extracting solution or the addition of barnyard fertilizer.